drm/komeda: Add line size support

On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.

So this patch is to set line size support and do the line size
check.
Signed-off-by: default avatarLowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Reviewed-by: default avatarJames Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: default avatarjames qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924080022.19250-2-lowry.li@arm.com
parent 7d79aa86
......@@ -106,6 +106,23 @@ static void dump_block_header(struct seq_file *sf, void __iomem *reg)
i, hdr.output_ids[i]);
}
/* On D71, we are using the global line size. From D32, every component have
* a line size register to indicate the fifo size.
*/
static u32 __get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg,
u32 max_default)
{
if (!d71->periph_addr)
max_default = malidp_read32(reg, BLK_MAX_LINE_SIZE);
return max_default;
}
static u32 get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg)
{
return __get_blk_line_size(d71, reg, d71->max_line_size);
}
static u32 to_rot_ctrl(u32 rot)
{
u32 lr_ctrl = 0;
......@@ -365,7 +382,28 @@ static int d71_layer_init(struct d71_dev *d71,
else
layer->layer_type = KOMEDA_FMT_SIMPLE_LAYER;
set_range(&layer->hsize_in, 4, d71->max_line_size);
if (!d71->periph_addr) {
/* D32 or newer product */
layer->line_sz = malidp_read32(reg, BLK_MAX_LINE_SIZE);
layer->yuv_line_sz = L_INFO_YUV_MAX_LINESZ(layer_info);
} else if (d71->max_line_size > 2048) {
/* D71 4K */
layer->line_sz = d71->max_line_size;
layer->yuv_line_sz = layer->line_sz / 2;
} else {
/* D71 2K */
if (layer->layer_type == KOMEDA_FMT_RICH_LAYER) {
/* rich layer is 4K configuration */
layer->line_sz = d71->max_line_size * 2;
layer->yuv_line_sz = layer->line_sz / 2;
} else {
layer->line_sz = d71->max_line_size;
layer->yuv_line_sz = 0;
}
}
set_range(&layer->hsize_in, 4, layer->line_sz);
set_range(&layer->vsize_in, 4, d71->max_vsize);
malidp_write32(reg, LAYER_PALPHA, D71_PALPHA_DEF_MAP);
......@@ -456,9 +494,11 @@ static int d71_wb_layer_init(struct d71_dev *d71,
wb_layer = to_layer(c);
wb_layer->layer_type = KOMEDA_FMT_WB_LAYER;
wb_layer->line_sz = get_blk_line_size(d71, reg);
wb_layer->yuv_line_sz = wb_layer->line_sz;
set_range(&wb_layer->hsize_in, D71_MIN_LINE_SIZE, d71->max_line_size);
set_range(&wb_layer->vsize_in, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
set_range(&wb_layer->hsize_in, 64, wb_layer->line_sz);
set_range(&wb_layer->vsize_in, 64, d71->max_vsize);
return 0;
}
......@@ -595,8 +635,8 @@ static int d71_compiz_init(struct d71_dev *d71,
compiz = to_compiz(c);
set_range(&compiz->hsize, D71_MIN_LINE_SIZE, d71->max_line_size);
set_range(&compiz->vsize, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
set_range(&compiz->hsize, 64, get_blk_line_size(d71, reg));
set_range(&compiz->vsize, 64, d71->max_vsize);
return 0;
}
......@@ -753,7 +793,7 @@ static int d71_scaler_init(struct d71_dev *d71,
}
scaler = to_scaler(c);
set_range(&scaler->hsize, 4, 2048);
set_range(&scaler->hsize, 4, __get_blk_line_size(d71, reg, 2048));
set_range(&scaler->vsize, 4, 4096);
scaler->max_downscaling = 6;
scaler->max_upscaling = 64;
......@@ -862,7 +902,7 @@ static int d71_splitter_init(struct d71_dev *d71,
splitter = to_splitter(c);
set_range(&splitter->hsize, 4, d71->max_line_size);
set_range(&splitter->hsize, 4, get_blk_line_size(d71, reg));
set_range(&splitter->vsize, 4, d71->max_vsize);
return 0;
......@@ -933,7 +973,8 @@ static int d71_merger_init(struct d71_dev *d71,
merger = to_merger(c);
set_range(&merger->hsize_merged, 4, 4032);
set_range(&merger->hsize_merged, 4,
__get_blk_line_size(d71, reg, 4032));
set_range(&merger->vsize_merged, 4, 4096);
return 0;
......
......@@ -10,6 +10,7 @@
/* Common block registers offset */
#define BLK_BLOCK_INFO 0x000
#define BLK_PIPELINE_INFO 0x004
#define BLK_MAX_LINE_SIZE 0x008
#define BLK_VALID_INPUT_ID0 0x020
#define BLK_OUTPUT_ID0 0x060
#define BLK_INPUT_ID0 0x080
......@@ -321,6 +322,7 @@
#define L_INFO_RF BIT(0)
#define L_INFO_CM BIT(1)
#define L_INFO_ABUF_SIZE(x) (((x) >> 4) & 0x7)
#define L_INFO_YUV_MAX_LINESZ(x) (((x) >> 16) & 0xFFFF)
/* Scaler registers */
#define SC_COEFFTAB 0x0DC
......@@ -494,13 +496,6 @@ enum d71_blk_type {
#define D71_DEFAULT_PREPRETCH_LINE 5
#define D71_BUS_WIDTH_16_BYTES 16
#define D71_MIN_LINE_SIZE 64
#define D71_MIN_VERTICAL_SIZE 64
#define D71_SC_MIN_LIN_SIZE 4
#define D71_SC_MIN_VERTICAL_SIZE 4
#define D71_SC_MAX_LIN_SIZE 2048
#define D71_SC_MAX_VERTICAL_SIZE 4096
#define D71_SC_MAX_UPSCALING 64
#define D71_SC_MAX_DOWNSCALING 6
#define D71_SC_SPLIT_OVERLAP 8
......
......@@ -227,6 +227,8 @@ struct komeda_layer {
/* accepted h/v input range before rotation */
struct malidp_range hsize_in, vsize_in;
u32 layer_type; /* RICH, SIMPLE or WB */
u32 line_sz;
u32 yuv_line_sz; /* maximum line size for YUV422 and YUV420 */
u32 supported_rots;
/* komeda supports layer split which splits a whole image to two parts
* left and right and handle them by two individual layer processors
......
......@@ -285,6 +285,7 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
struct komeda_data_flow_cfg *dflow)
{
u32 src_x, src_y, src_w, src_h;
u32 line_sz, max_line_sz;
if (!komeda_fb_is_layer_supported(kfb, layer->layer_type, dflow->rot))
return -EINVAL;
......@@ -314,6 +315,22 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
return -EINVAL;
}
if (drm_rotation_90_or_270(dflow->rot))
line_sz = dflow->in_h;
else
line_sz = dflow->in_w;
if (kfb->base.format->hsub > 1)
max_line_sz = layer->yuv_line_sz;
else
max_line_sz = layer->line_sz;
if (line_sz > max_line_sz) {
DRM_DEBUG_ATOMIC("Required line_sz: %d exceeds the max size %d\n",
line_sz, max_line_sz);
return -EINVAL;
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment