UAPI: (Scripted) Disintegrate arch/blackfin/include/asm

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

arch/blackfin/include/asm/Kbuild

-include include/asm-generic/Kbuild.asm
 
 generic-y += auxvec.h
 generic-y += bitsperlong.h
@@ -43,7 +42,3 @@ generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += user.h
 generic-y += xor.h
-
-header-y += bfin_sport.h
-header-y += cachectl.h
-header-y += fixed_code.h

arch/blackfin/include/asm/bfin_sport.h

@@ -5,65 +5,12 @@
  *
  * Licensed under the GPL-2 or later.
  */
-
 #ifndef __BFIN_SPORT_H__
 #define __BFIN_SPORT_H__
 
-/* Sport mode: it can be set to TDM, i2s or others */
-#define NORM_MODE	0x0
-#define TDM_MODE	0x1
-#define I2S_MODE	0x2
-#define NDSO_MODE	0x3
-
-/* Data format, normal, a-law or u-law */
-#define NORM_FORMAT	0x0
-#define ALAW_FORMAT	0x2
-#define ULAW_FORMAT	0x3
-
-/* Function driver which use sport must initialize the structure */
-struct sport_config {
-	/* TDM (multichannels), I2S or other mode */
-	unsigned int mode:3;
-	unsigned int polled;	/* use poll instead of irq when set */
-
-	/* if TDM mode is selected, channels must be set */
-	int channels;	/* Must be in 8 units */
-	unsigned int frame_delay:4;	/* Delay between frame sync pulse and first bit */
-
-	/* I2S mode */
-	unsigned int right_first:1;	/* Right stereo channel first */
-
-	/* In mormal mode, the following item need to be set */
-	unsigned int lsb_first:1;	/* order of transmit or receive data */
-	unsigned int fsync:1;	/* Frame sync required */
-	unsigned int data_indep:1;	/* data independent frame sync generated */
-	unsigned int act_low:1;	/* Active low TFS */
-	unsigned int late_fsync:1;	/* Late frame sync */
-	unsigned int tckfe:1;
-	unsigned int sec_en:1;	/* Secondary side enabled */
-
-	/* Choose clock source */
-	unsigned int int_clk:1;	/* Internal or external clock */
-
-	/* If external clock is used, the following fields are ignored */
-	int serial_clk;
-	int fsync_clk;
-
-	unsigned int data_format:2;	/* Normal, u-law or a-law */
-
-	int word_len;		/* How length of the word in bits, 3-32 bits */
-	int dma_enabled;
-};
-
-/* Userspace interface */
-#define SPORT_IOC_MAGIC		'P'
-#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
-#define SPORT_IOC_GET_SYSTEMCLOCK         _IOR('P', 0x02, unsigned long)
-#define SPORT_IOC_SET_BAUDRATE            _IOW('P', 0x03, unsigned long)
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
+#include <uapi/asm/bfin_sport.h>
 
 /*
  * All Blackfin system MMRs are padded to 32bits even if the register
@@ -122,76 +69,3 @@ struct bfin_snd_platform_data {
 })
 
 #endif
-
-/* SPORT_TCR1 Masks */
-#define TSPEN		0x0001	/* TX enable */
-#define ITCLK		0x0002	/* Internal TX Clock Select */
-#define TDTYPE		0x000C	/* TX Data Formatting Select */
-#define DTYPE_NORM	0x0000	/* Data Format Normal */
-#define DTYPE_ULAW	0x0008	/* Compand Using u-Law */
-#define DTYPE_ALAW	0x000C	/* Compand Using A-Law */
-#define TLSBIT		0x0010	/* TX Bit Order */
-#define ITFS		0x0200	/* Internal TX Frame Sync Select */
-#define TFSR		0x0400	/* TX Frame Sync Required Select */
-#define DITFS		0x0800	/* Data Independent TX Frame Sync Select */
-#define LTFS		0x1000	/* Low TX Frame Sync Select */
-#define LATFS		0x2000	/* Late TX Frame Sync Select */
-#define TCKFE		0x4000	/* TX Clock Falling Edge Select */
-
-/* SPORT_TCR2 Masks */
-#define SLEN		0x001F	/* SPORT TX Word Length (2 - 31) */
-#define DP_SLEN(x)	BFIN_DEPOSIT(SLEN, x)
-#define EX_SLEN(x)	BFIN_EXTRACT(SLEN, x)
-#define TXSE		0x0100	/* TX Secondary Enable */
-#define TSFSE		0x0200	/* TX Stereo Frame Sync Enable */
-#define TRFST		0x0400	/* TX Right-First Data Order */
-
-/* SPORT_RCR1 Masks */
-#define RSPEN		0x0001	/* RX enable */
-#define IRCLK		0x0002	/* Internal RX Clock Select */
-#define RDTYPE		0x000C	/* RX Data Formatting Select */
-/* DTYPE_* defined above */
-#define RLSBIT		0x0010	/* RX Bit Order */
-#define IRFS		0x0200	/* Internal RX Frame Sync Select */
-#define RFSR		0x0400	/* RX Frame Sync Required Select */
-#define LRFS		0x1000	/* Low RX Frame Sync Select */
-#define LARFS		0x2000	/* Late RX Frame Sync Select */
-#define RCKFE		0x4000	/* RX Clock Falling Edge Select */
-
-/* SPORT_RCR2 Masks */
-/* SLEN defined above */
-#define RXSE		0x0100	/* RX Secondary Enable */
-#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable */
-#define RRFST		0x0400	/* Right-First Data Order */
-
-/* SPORT_STAT Masks */
-#define RXNE		0x0001	/* RX FIFO Not Empty Status */
-#define RUVF		0x0002	/* RX Underflow Status */
-#define ROVF		0x0004	/* RX Overflow Status */
-#define TXF		0x0008	/* TX FIFO Full Status */
-#define TUVF		0x0010	/* TX Underflow Status */
-#define TOVF		0x0020	/* TX Overflow Status */
-#define TXHRE		0x0040	/* TX Hold Register Empty */
-
-/* SPORT_MCMC1 Masks */
-#define SP_WOFF		0x03FF	/* Multichannel Window Offset Field */
-#define DP_SP_WOFF(x)	BFIN_DEPOSIT(SP_WOFF, x)
-#define EX_SP_WOFF(x)	BFIN_EXTRACT(SP_WOFF, x)
-#define SP_WSIZE	0xF000	/* Multichannel Window Size Field */
-#define DP_SP_WSIZE(x)	BFIN_DEPOSIT(SP_WSIZE, x)
-#define EX_SP_WSIZE(x)	BFIN_EXTRACT(SP_WSIZE, x)
-
-/* SPORT_MCMC2 Masks */
-#define MCCRM		0x0003	/* Multichannel Clock Recovery Mode */
-#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery) */
-#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock */
-#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock */
-#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing */
-#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing */
-#define MCMEN		0x0010	/* Multichannel Frame Mode Enable */
-#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
-#define MFD		0xF000	/* Multichannel Frame Delay */
-#define DP_MFD(x)	BFIN_DEPOSIT(MFD, x)
-#define EX_MFD(x)	BFIN_EXTRACT(MFD, x)
-
-#endif

arch/blackfin/include/asm/fixed_code.h

@@ -6,11 +6,11 @@
  *
  * Licensed under the GPL-2 or later.
  */
-
 #ifndef __BFIN_ASM_FIXED_CODE_H__
 #define __BFIN_ASM_FIXED_CODE_H__
 
-#ifdef __KERNEL__
+#include <uapi/asm/fixed_code.h>
+
 #ifndef __ASSEMBLY__
 #include <linux/linkage.h>
 #include <linux/ptrace.h>
@@ -28,29 +28,3 @@ extern void safe_user_instruction(void);
 extern void sigreturn_stub(void);
 #endif
 #endif
-
-#ifndef CONFIG_PHY_RAM_BASE_ADDRESS
-#define CONFIG_PHY_RAM_BASE_ADDRESS	0x0
-#endif
-
-#define FIXED_CODE_START	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x400)
-
-#define SIGRETURN_STUB		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x400)
-
-#define ATOMIC_SEQS_START	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x410)
-
-#define ATOMIC_XCHG32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x410)
-#define ATOMIC_CAS32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x420)
-#define ATOMIC_ADD32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x430)
-#define ATOMIC_SUB32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x440)
-#define ATOMIC_IOR32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x450)
-#define ATOMIC_AND32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x460)
-#define ATOMIC_XOR32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x470)
-
-#define ATOMIC_SEQS_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x480)
-
-#define SAFE_USER_INSTRUCTION   (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480)
-
-#define FIXED_CODE_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x490)
-
-#endif

arch/blackfin/include/asm/ptrace.h

@@ -3,102 +3,13 @@
  *
  * Licensed under the GPL-2 or later.
  */
-
 #ifndef _BFIN_PTRACE_H
 #define _BFIN_PTRACE_H
 
-/*
- * GCC defines register number like this:
- * -----------------------------
- *       0 - 7 are data registers R0-R7
- *       8 - 15 are address registers P0-P7
- *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
- *      32 - 33 A registers A0 & A1
- *      34 -    status register
- * -----------------------------
- *
- * We follows above, except:
- *      32-33 --- Low 32-bit of A0&1
- *      34-35 --- High 8-bit of A0&1
- */
+#include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
 
-struct task_struct;
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-	long orig_pc;
-	long ipend;
-	long seqstat;
-	long rete;
-	long retn;
-	long retx;
-	long pc;		/* PC == RETI */
-	long rets;
-	long reserved;		/* Used as scratch during system calls */
-	long astat;
-	long lb1;
-	long lb0;
-	long lt1;
-	long lt0;
-	long lc1;
-	long lc0;
-	long a1w;
-	long a1x;
-	long a0w;
-	long a0x;
-	long b3;
-	long b2;
-	long b1;
-	long b0;
-	long l3;
-	long l2;
-	long l1;
-	long l0;
-	long m3;
-	long m2;
-	long m1;
-	long m0;
-	long i3;
-	long i2;
-	long i1;
-	long i0;
-	long usp;
-	long fp;
-	long p5;
-	long p4;
-	long p3;
-	long p2;
-	long p1;
-	long p0;
-	long r7;
-	long r6;
-	long r5;
-	long r4;
-	long r3;
-	long r2;
-	long r1;
-	long r0;
-	long orig_r0;
-	long orig_p0;
-	long syscfg;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13	/* ptrace signal  */
-
-#define PTRACE_GETFDPIC           31	/* get the ELF fdpic loadmap address */
-#define PTRACE_GETFDPIC_EXEC       0	/* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP     1	/* [addr] request the interpreter loadmap */
-
-#define PS_S  (0x0002)
-
-#ifdef __KERNEL__
-
 /* user_mode returns true if only one bit is set in IPEND, other than the
    master interrupt enable.  */
 #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
@@ -126,75 +37,5 @@ extern int is_user_addr_valid(struct task_struct *child,
 
 #include <asm-generic/ptrace.h>
 
-#endif  /*  __KERNEL__  */
-
 #endif				/* __ASSEMBLY__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- */
-
-#define PT_R0 204
-#define PT_R1 200
-#define PT_R2 196
-#define PT_R3 192
-#define PT_R4 188
-#define PT_R5 184
-#define PT_R6 180
-#define PT_R7 176
-#define PT_P0 172
-#define PT_P1 168
-#define PT_P2 164
-#define PT_P3 160
-#define PT_P4 156
-#define PT_P5 152
-#define PT_FP 148
-#define PT_USP 144
-#define PT_I0 140
-#define PT_I1 136
-#define PT_I2 132
-#define PT_I3 128
-#define PT_M0 124
-#define PT_M1 120
-#define PT_M2 116
-#define PT_M3 112
-#define PT_L0 108
-#define PT_L1 104
-#define PT_L2 100
-#define PT_L3 96
-#define PT_B0 92
-#define PT_B1 88
-#define PT_B2 84
-#define PT_B3 80
-#define PT_A0X 76
-#define PT_A0W 72
-#define PT_A1X 68
-#define PT_A1W 64
-#define PT_LC0 60
-#define PT_LC1 56
-#define PT_LT0 52
-#define PT_LT1 48
-#define PT_LB0 44
-#define PT_LB1 40
-#define PT_ASTAT 36
-#define PT_RESERVED 32
-#define PT_RETS 28
-#define PT_PC 24
-#define PT_RETX 20
-#define PT_RETN 16
-#define PT_RETE 12
-#define PT_SEQSTAT 8
-#define PT_IPEND 4
-
-#define PT_ORIG_R0 208
-#define PT_ORIG_P0 212
-#define PT_SYSCFG 216
-#define PT_TEXT_ADDR 220
-#define PT_TEXT_END_ADDR 224
-#define PT_DATA_ADDR 228
-#define PT_FDPIC_EXEC 232
-#define PT_FDPIC_INTERP 236
-
-#define PT_LAST_PSEUDO PT_FDPIC_INTERP
-
 #endif				/* _BFIN_PTRACE_H */

arch/blackfin/include/uapi/asm/Kbuild

 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += bfin_sport.h
+header-y += byteorder.h
+header-y += cachectl.h
+header-y += fcntl.h
+header-y += fixed_code.h
+header-y += ioctls.h
+header-y += kvm_para.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += stat.h
+header-y += swab.h
+header-y += unistd.h

arch/blackfin/include/uapi/asm/bfin_sport.h

+/*
+ * bfin_sport.h - interface to Blackfin SPORTs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI__BFIN_SPORT_H__
+#define _UAPI__BFIN_SPORT_H__
+
+/* Sport mode: it can be set to TDM, i2s or others */
+#define NORM_MODE	0x0
+#define TDM_MODE	0x1
+#define I2S_MODE	0x2
+#define NDSO_MODE	0x3
+
+/* Data format, normal, a-law or u-law */
+#define NORM_FORMAT	0x0
+#define ALAW_FORMAT	0x2
+#define ULAW_FORMAT	0x3
+
+/* Function driver which use sport must initialize the structure */
+struct sport_config {
+	/* TDM (multichannels), I2S or other mode */
+	unsigned int mode:3;
+	unsigned int polled;	/* use poll instead of irq when set */
+
+	/* if TDM mode is selected, channels must be set */
+	int channels;	/* Must be in 8 units */
+	unsigned int frame_delay:4;	/* Delay between frame sync pulse and first bit */
+
+	/* I2S mode */
+	unsigned int right_first:1;	/* Right stereo channel first */
+
+	/* In mormal mode, the following item need to be set */
+	unsigned int lsb_first:1;	/* order of transmit or receive data */
+	unsigned int fsync:1;	/* Frame sync required */
+	unsigned int data_indep:1;	/* data independent frame sync generated */
+	unsigned int act_low:1;	/* Active low TFS */
+	unsigned int late_fsync:1;	/* Late frame sync */
+	unsigned int tckfe:1;
+	unsigned int sec_en:1;	/* Secondary side enabled */
+
+	/* Choose clock source */
+	unsigned int int_clk:1;	/* Internal or external clock */
+
+	/* If external clock is used, the following fields are ignored */
+	int serial_clk;
+	int fsync_clk;
+
+	unsigned int data_format:2;	/* Normal, u-law or a-law */
+
+	int word_len;		/* How length of the word in bits, 3-32 bits */
+	int dma_enabled;
+};
+
+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+#define SPORT_IOC_GET_SYSTEMCLOCK         _IOR('P', 0x02, unsigned long)
+#define SPORT_IOC_SET_BAUDRATE            _IOW('P', 0x03, unsigned long)
+
+
+/* SPORT_TCR1 Masks */
+#define TSPEN		0x0001	/* TX enable */
+#define ITCLK		0x0002	/* Internal TX Clock Select */
+#define TDTYPE		0x000C	/* TX Data Formatting Select */
+#define DTYPE_NORM	0x0000	/* Data Format Normal */
+#define DTYPE_ULAW	0x0008	/* Compand Using u-Law */
+#define DTYPE_ALAW	0x000C	/* Compand Using A-Law */
+#define TLSBIT		0x0010	/* TX Bit Order */
+#define ITFS		0x0200	/* Internal TX Frame Sync Select */
+#define TFSR		0x0400	/* TX Frame Sync Required Select */
+#define DITFS		0x0800	/* Data Independent TX Frame Sync Select */
+#define LTFS		0x1000	/* Low TX Frame Sync Select */
+#define LATFS		0x2000	/* Late TX Frame Sync Select */
+#define TCKFE		0x4000	/* TX Clock Falling Edge Select */
+
+/* SPORT_TCR2 Masks */
+#define SLEN		0x001F	/* SPORT TX Word Length (2 - 31) */
+#define DP_SLEN(x)	BFIN_DEPOSIT(SLEN, x)
+#define EX_SLEN(x)	BFIN_EXTRACT(SLEN, x)
+#define TXSE		0x0100	/* TX Secondary Enable */
+#define TSFSE		0x0200	/* TX Stereo Frame Sync Enable */
+#define TRFST		0x0400	/* TX Right-First Data Order */
+
+/* SPORT_RCR1 Masks */
+#define RSPEN		0x0001	/* RX enable */
+#define IRCLK		0x0002	/* Internal RX Clock Select */
+#define RDTYPE		0x000C	/* RX Data Formatting Select */
+/* DTYPE_* defined above */
+#define RLSBIT		0x0010	/* RX Bit Order */
+#define IRFS		0x0200	/* Internal RX Frame Sync Select */
+#define RFSR		0x0400	/* RX Frame Sync Required Select */
+#define LRFS		0x1000	/* Low RX Frame Sync Select */
+#define LARFS		0x2000	/* Late RX Frame Sync Select */
+#define RCKFE		0x4000	/* RX Clock Falling Edge Select */
+
+/* SPORT_RCR2 Masks */
+/* SLEN defined above */
+#define RXSE		0x0100	/* RX Secondary Enable */
+#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable */
+#define RRFST		0x0400	/* Right-First Data Order */
+
+/* SPORT_STAT Masks */
+#define RXNE		0x0001	/* RX FIFO Not Empty Status */
+#define RUVF		0x0002	/* RX Underflow Status */
+#define ROVF		0x0004	/* RX Overflow Status */
+#define TXF		0x0008	/* TX FIFO Full Status */
+#define TUVF		0x0010	/* TX Underflow Status */
+#define TOVF		0x0020	/* TX Overflow Status */
+#define TXHRE		0x0040	/* TX Hold Register Empty */
+
+/* SPORT_MCMC1 Masks */
+#define SP_WOFF		0x03FF	/* Multichannel Window Offset Field */
+#define DP_SP_WOFF(x)	BFIN_DEPOSIT(SP_WOFF, x)
+#define EX_SP_WOFF(x)	BFIN_EXTRACT(SP_WOFF, x)
+#define SP_WSIZE	0xF000	/* Multichannel Window Size Field */
+#define DP_SP_WSIZE(x)	BFIN_DEPOSIT(SP_WSIZE, x)
+#define EX_SP_WSIZE(x)	BFIN_EXTRACT(SP_WSIZE, x)
+
+/* SPORT_MCMC2 Masks */
+#define MCCRM		0x0003	/* Multichannel Clock Recovery Mode */
+#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing */
+#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing */
+#define MCMEN		0x0010	/* Multichannel Frame Mode Enable */
+#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
+#define MFD		0xF000	/* Multichannel Frame Delay */
+#define DP_MFD(x)	BFIN_DEPOSIT(MFD, x)
+#define EX_MFD(x)	BFIN_EXTRACT(MFD, x)
+
+#endif /* _UAPI__BFIN_SPORT_H__ */

arch/blackfin/include/uapi/asm/fixed_code.h

+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI__BFIN_ASM_FIXED_CODE_H__
+#define _UAPI__BFIN_ASM_FIXED_CODE_H__
+
+
+#ifndef CONFIG_PHY_RAM_BASE_ADDRESS
+#define CONFIG_PHY_RAM_BASE_ADDRESS	0x0
+#endif
+
+#define FIXED_CODE_START	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x400)
+
+#define SIGRETURN_STUB		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x400)
+
+#define ATOMIC_SEQS_START	(CONFIG_PHY_RAM_BASE_ADDRESS + 0x410)
+
+#define ATOMIC_XCHG32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x410)
+#define ATOMIC_CAS32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x420)
+#define ATOMIC_ADD32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x430)
+#define ATOMIC_SUB32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x440)
+#define ATOMIC_IOR32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x450)
+#define ATOMIC_AND32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x460)
+#define ATOMIC_XOR32		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x470)
+
+#define ATOMIC_SEQS_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x480)
+
+#define SAFE_USER_INSTRUCTION   (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480)
+
+#define FIXED_CODE_END		(CONFIG_PHY_RAM_BASE_ADDRESS + 0x490)
+
+#endif /* _UAPI__BFIN_ASM_FIXED_CODE_H__ */

arch/blackfin/include/uapi/asm/ptrace.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _UAPI_BFIN_PTRACE_H
+#define _UAPI_BFIN_PTRACE_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *       0 - 7 are data registers R0-R7
+ *       8 - 15 are address registers P0-P7
+ *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
+ *      32 - 33 A registers A0 & A1
+ *      34 -    status register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *      32-33 --- Low 32-bit of A0&1
+ *      34-35 --- High 8-bit of A0&1
+ */
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long orig_pc;
+	long ipend;
+	long seqstat;
+	long rete;
+	long retn;
+	long retx;
+	long pc;		/* PC == RETI */
+	long rets;
+	long reserved;		/* Used as scratch during system calls */
+	long astat;
+	long lb1;
+	long lb0;
+	long lt1;
+	long lt0;
+	long lc1;
+	long lc0;
+	long a1w;
+	long a1x;
+	long a0w;
+	long a0x;
+	long b3;
+	long b2;
+	long b1;
+	long b0;
+	long l3;
+	long l2;
+	long l1;
+	long l0;
+	long m3;
+	long m2;
+	long m1;
+	long m0;
+	long i3;
+	long i2;
+	long i1;
+	long i0;
+	long usp;
+	long fp;
+	long p5;
+	long p4;
+	long p3;
+	long p2;
+	long p1;
+	long p0;
+	long r7;
+	long r6;
+	long r5;
+	long r4;
+	long r3;
+	long r2;
+	long r1;
+	long r0;
+	long orig_r0;
+	long orig_p0;
+	long syscfg;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13	/* ptrace signal  */
+
+#define PTRACE_GETFDPIC           31	/* get the ELF fdpic loadmap address */
+#define PTRACE_GETFDPIC_EXEC       0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP     1	/* [addr] request the interpreter loadmap */
+
+#define PS_S  (0x0002)
+
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+
+#define PT_ORIG_R0 208
+#define PT_ORIG_P0 212
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+
+#define PT_LAST_PSEUDO PT_FDPIC_INTERP
+
+#endif /* _UAPI_BFIN_PTRACE_H */