Commit 2c45e7fb authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Remove the 'module' Kconfig option for thermal subsystem framework
   because the thermal framework are required to be ready as early as
   possible to avoid overheat at boot time (Daniel Lezcano)

 - Fix a bug that thermal framework pokes disabled thermal zones upon
   resume (Wei Wang)

  - A couple of cleanups and trivial fixes on int340x thermal drivers
    (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: processor_thermal: Downgrade error message
  mlxsw: Remove obsolete dependency on THERMAL=m
  hwmon/drivers/core: Simplify complex dependency
  thermal/drivers/core: Fix typo in the option name
  thermal/drivers/core: Remove depends on THERMAL in Kconfig
  thermal/drivers/core: Remove module unload code
  thermal/drivers/core: Remove the module Kconfig's option
  thermal: core: skip update disabled thermal zones after suspend
  thermal: make device_register's type argument const
  thermal: intel: int340x: processor_thermal_device: simplify to get driver data
  thermal/int3403_thermal: favor _TMP instead of PTYP
parents 311f7128 6df24c3e
......@@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM75=y
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_FB=y
......
......@@ -387,7 +387,7 @@ CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=m
CONFIG_SA1100_WATCHDOG=m
......
......@@ -228,7 +228,7 @@ CONFIG_SERIAL_IP22_ZILOG=m
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_INDYDOG=m
# CONFIG_VGA_CONSOLE is not set
......
......@@ -271,7 +271,7 @@ CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
......
......@@ -119,7 +119,7 @@ CONFIG_I2C_PUV3=y
# Hardware Monitoring support
#CONFIG_SENSORS_LM75=m
# Generic Thermal sysfs driver
#CONFIG_THERMAL=m
#CONFIG_THERMAL=y
#CONFIG_THERMAL_HWMON=y
# Multimedia support
......
......@@ -118,9 +118,7 @@ static DEFINE_IDA(hwmon_ida);
* The complex conditional is necessary to avoid a cyclic dependency
* between hwmon and thermal_sys modules.
*/
#if IS_REACHABLE(CONFIG_THERMAL) && defined(CONFIG_THERMAL_OF) && \
(!defined(CONFIG_THERMAL_HWMON) || \
!(defined(MODULE) && IS_MODULE(CONFIG_THERMAL)))
#ifdef CONFIG_THERMAL_OF
static int hwmon_thermal_get_temp(void *data, int *temp)
{
struct hwmon_thermal_data *tdata = data;
......
......@@ -22,7 +22,6 @@ config MLXSW_CORE_HWMON
config MLXSW_CORE_THERMAL
bool "Thermal zone support for Mellanox Technologies Switch ASICs"
depends on MLXSW_CORE && THERMAL
depends on !(MLXSW_CORE=y && THERMAL=m)
default y
---help---
Say Y here if you want to automatically control fans speed according
......
......@@ -3,7 +3,7 @@
#
menuconfig THERMAL
tristate "Generic Thermal sysfs driver"
bool "Generic Thermal sysfs driver"
help
Generic Thermal Sysfs driver offers a generic mechanism for
thermal management. Usually it's made up of one or more thermal
......@@ -11,7 +11,7 @@ menuconfig THERMAL
Each thermal zone contains its own temperature, trip points,
cooling devices.
All platforms with ACPI thermal support can use this driver.
If you want this support, you should say Y or M here.
If you want this support, you should say Y here.
if THERMAL
......@@ -24,7 +24,6 @@ config THERMAL_STATISTICS
config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
int "Emergency poweroff delay in milli-seconds"
depends on THERMAL
default 0
help
Thermal subsystem will issue a graceful shutdown when
......@@ -149,10 +148,9 @@ config THERMAL_GOV_POWER_ALLOCATOR
allocating and limiting power to devices.
config CPU_THERMAL
bool "generic cpu cooling support"
bool "Generic cpu cooling support"
depends on CPU_FREQ
depends on THERMAL_OF
depends on THERMAL=y
help
This implements the generic cpu cooling mechanism through frequency
reduction. An ACPI version of this already exists
......
config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver"
depends on THERMAL
depends on X86
depends on CPU_SUP_INTEL
help
......
......@@ -220,6 +220,7 @@ static int int3403_add(struct platform_device *pdev)
{
struct int3403_priv *priv;
int result = 0;
unsigned long long tmp;
acpi_status status;
priv = devm_kzalloc(&pdev->dev, sizeof(struct int3403_priv),
......@@ -234,20 +235,19 @@ static int int3403_add(struct platform_device *pdev)
goto err;
}
status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
NULL, &priv->type);
if (ACPI_FAILURE(status)) {
unsigned long long tmp;
status = acpi_evaluate_integer(priv->adev->handle, "_TMP",
NULL, &tmp);
if (ACPI_FAILURE(status)) {
status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
NULL, &priv->type);
if (ACPI_FAILURE(status)) {
result = -EINVAL;
goto err;
}
} else {
priv->type = INT3403_TYPE_SENSOR;
}
}
platform_set_drvdata(pdev, priv);
switch (priv->type) {
......
......@@ -81,22 +81,13 @@ static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
struct pci_dev *pci_dev; \
struct platform_device *pdev; \
struct proc_thermal_device *proc_dev; \
struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \
\
if (proc_thermal_emum_mode == PROC_THERMAL_NONE) { \
dev_warn(dev, "Attempted to get power limit before device was initialized!\n"); \
return 0; \
} \
\
if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
pdev = to_platform_device(dev); \
proc_dev = platform_get_drvdata(pdev); \
} else { \
pci_dev = to_pci_dev(dev); \
proc_dev = pci_get_drvdata(pci_dev); \
} \
return sprintf(buf, "%lu\n",\
(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
}
......@@ -274,7 +265,7 @@ static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
THERMAL_DEVICE_POWER_CAPABILITY_CHANGED);
break;
default:
dev_err(proc_priv->dev, "Unsupported event [0x%x]\n", event);
dev_dbg(proc_priv->dev, "Unsupported event [0x%x]\n", event);
break;
}
}
......
config QCOM_TSENS
tristate "Qualcomm TSENS Temperature Alarm"
depends on THERMAL
depends on QCOM_QFPROM
depends on ARCH_QCOM || COMPILE_TEST
help
......
......@@ -266,7 +266,7 @@ static int __init thermal_register_governors(void)
return thermal_gov_power_allocator_register();
}
static void thermal_unregister_governors(void)
static void __init thermal_unregister_governors(void)
{
thermal_gov_step_wise_unregister();
thermal_gov_fair_share_unregister();
......@@ -941,7 +941,7 @@ static void bind_cdev(struct thermal_cooling_device *cdev)
*/
static struct thermal_cooling_device *
__thermal_cooling_device_register(struct device_node *np,
char *type, void *devdata,
const char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
{
struct thermal_cooling_device *cdev;
......@@ -1015,7 +1015,7 @@ __thermal_cooling_device_register(struct device_node *np,
* ERR_PTR. Caller must check return value with IS_ERR*() helpers.
*/
struct thermal_cooling_device *
thermal_cooling_device_register(char *type, void *devdata,
thermal_cooling_device_register(const char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
{
return __thermal_cooling_device_register(NULL, type, devdata, ops);
......@@ -1039,7 +1039,7 @@ EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
*/
struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node *np,
char *type, void *devdata,
const char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
{
return __thermal_cooling_device_register(np, type, devdata, ops);
......@@ -1543,6 +1543,7 @@ static int thermal_pm_notify(struct notifier_block *nb,
unsigned long mode, void *_unused)
{
struct thermal_zone_device *tz;
enum thermal_device_mode tz_mode;
switch (mode) {
case PM_HIBERNATION_PREPARE:
......@@ -1555,6 +1556,13 @@ static int thermal_pm_notify(struct notifier_block *nb,
case PM_POST_SUSPEND:
atomic_set(&in_suspend, 0);
list_for_each_entry(tz, &thermal_tz_list, node) {
tz_mode = THERMAL_DEVICE_ENABLED;
if (tz->ops->get_mode)
tz->ops->get_mode(tz, &tz_mode);
if (tz_mode == THERMAL_DEVICE_DISABLED)
continue;
thermal_zone_device_init(tz);
thermal_zone_device_update(tz,
THERMAL_EVENT_UNSPECIFIED);
......@@ -1612,19 +1620,4 @@ static int __init thermal_init(void)
mutex_destroy(&poweroff_lock);
return result;
}
static void __exit thermal_exit(void)
{
unregister_pm_notifier(&thermal_pm_nb);
of_thermal_destroy_zones();
genetlink_exit();
class_unregister(&thermal_class);
thermal_unregister_governors();
ida_destroy(&thermal_tz_ida);
ida_destroy(&thermal_cdev_ida);
mutex_destroy(&thermal_list_lock);
mutex_destroy(&thermal_governor_lock);
}
fs_initcall(thermal_init);
module_exit(thermal_exit);
......@@ -442,10 +442,10 @@ void thermal_zone_device_update(struct thermal_zone_device *,
enum thermal_notify_event);
void thermal_zone_set_trips(struct thermal_zone_device *);
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
const struct thermal_cooling_device_ops *);
struct thermal_cooling_device *thermal_cooling_device_register(const char *,
void *, const struct thermal_cooling_device_ops *);
struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node *np, char *, void *,
thermal_of_cooling_device_register(struct device_node *np, const char *, void *,
const struct thermal_cooling_device_ops *);
struct thermal_cooling_device *
devm_thermal_of_cooling_device_register(struct device *dev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment