Merge tag 'davinci-for-v4.12/dt' of...

Merge tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Pull "DaVinci DT updates for v4.12" from Sekhar Nori:

DaVinci device tree updates to enable
Video display on DA850 along with some
whitespace clean-up.

Also, enables sound and ADC support on
Lego EV3.

* tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-evm: add the output port to the vpif node
  ARM: dts: da850-evm: add IO expander node on UI card
  ARM: dts: da850: add vpif video display pins
  ARM: dts: da850-evm: fix whitespace errors
  ARM: da850-lego-ev3: Add device tree node for sound
  ARM: da850-lego-ev3: Add device tree node for A/DC

arch/arm/boot/dts/da850-evm.dts

@@ -9,6 +9,7 @@
  */
 /dts-v1/;
 #include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "ti,da850-evm", "ti,da850";
@@ -78,7 +79,10 @@ tlv320aic3106: tlv320aic3106@18 {
 				DRVDD-supply = <&vbat>;
 				DVDD-supply = <&vbat>;
 			};
-
+			tca6416: gpio@20 {
+				compatible = "ti,tca6416";
+				reg = <0x20>;
+			};
 		};
 		wdt: wdt@21000 {
 			status = "okay";
@@ -293,20 +297,27 @@ nand@2000000,0 {
 
 &vpif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&vpif_capture_pins>;
+	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
 	status = "okay";
 
 	/* VPIF capture port */
-	port {
-		vpif_ch0: endpoint@0 {
+	port@0 {
+		vpif_input_ch0: endpoint@0 {
 			reg = <0>;
 			bus-width = <8>;
 		};
 
-		vpif_ch1: endpoint@1 {
+		vpif_input_ch1: endpoint@1 {
 			reg = <1>;
 			bus-width = <8>;
 			data-shift = <8>;
 		};
 	};
+
+	/* VPIF display port */
+	port@1 {
+		vpif_output_ch0: endpoint {
+			bus-width = <8>;
+		};
+	};
 };

arch/arm/boot/dts/da850-lego-ev3.dts

@@ -123,6 +123,14 @@ gpio-poweroff {
 		pinctrl-0 = <&system_power_pin>;
 	};
 
+	sound {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm0b_pins>;
+		pwms = <&ehrpwm0 1 1000000 0>;
+		amp-supply = <&amp>;
+	};
+
 	/*
 	 * This is a 5V current limiting regulator that is shared by USB,
 	 * the sensor (input) ports, the motor (output) ports and the A/DC.
@@ -139,6 +147,31 @@ vcc5v: regulator1 {
 		enable-active-high;
 		regulator-boot-on;
 	};
+
+	/*
+	 * This is a simple voltage divider on VCC5V to provide a 2.5V
+	 * reference signal to the ADC.
+	 */
+	adc_ref: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "adc ref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		vin-supply = <&vcc5v>;
+	};
+
+	/*
+	 * This is the amplifier for the speaker.
+	 */
+	amp: regulator3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "amp";
+		gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pmx_core {
@@ -195,6 +228,13 @@ vcc5v_pins: pinmux_vcc5v {
 			0x4c 0x00008000 0x0000f000
 		>;
 	};
+
+	amp_pins: pinmux_amp_pins {
+		pinctrl-single,bits = <
+			/* GP6[15] */
+			0x34 0x00000008 0x0000000f
+		>;
+	};
 };
 
 &pinconf {
@@ -293,6 +333,18 @@ partition@cb0000 {
 			};
 		};
 	};
+
+	adc: adc@3 {
+		compatible = "ti,ads7957";
+		reg = <3>;
+		#io-channel-cells = <1>;
+		spi-max-frequency = <10000000>;
+		vref-supply = <&adc_ref>;
+	};
+};
+
+&ehrpwm0 {
+	status = "okay";
 };
 
 &gpio {

arch/arm/boot/dts/da850.dtsi

@@ -216,8 +216,21 @@ vpif_capture_pins: vpif_capture_pins {
 					0x3c 0x11111111 0xffffffff
 					/* VP_DIN[8..9] */
 					0x40 0x00000011 0x000000ff
-					/* VP_CLKIN3, VP_CLKIN2 */
-					0x4c 0x00010100 0x000f0f00
+				>;
+			};
+			vpif_display_pins: vpif_display_pins {
+				pinctrl-single,bits = <
+					/* VP_DOUT[2..7] */
+					0x40 0x11111100 0xffffff00
+					/* VP_DOUT[10..15,0..1] */
+					0x44 0x11111111 0xffffffff
+					/*  VP_DOUT[8..9] */
+					0x48 0x00000011 0x000000ff
+					/*
+					 * VP_CLKOUT3, VP_CLKIN3,
+					 * VP_CLKOUT2, VP_CLKIN2
+					 */
+					0x4c 0x00111100 0x00ffff00
 				>;
 			};
 		};
@@ -345,7 +358,13 @@ vpif: video@217000 {
 			status = "disabled";
 
 			/* VPIF capture port */
-			port {
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* VPIF display port */
+			port@1 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};