Commit 2c76b348 authored by David S. Miller's avatar David S. Miller

Merge branch 'dsa-lan9303-check-error-value-from-devm_gpiod_get_optional'

Phil Reid says:

====================
net: dsa: lan9303: check error value from devm_gpiod_get_optional()

Errors need to be prograted back from probe.

Note: I have only compile tested the code as I don't have the hardware.
Egil Hjelmeland <privat@egil-hjelmeland.no> has tested it but I haven't
added at Test-by: wasn't in the standard form. Not sure if that's ok or
not.

Changes from v1:
- rebased on net-next
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 9f239fe6 f1689132
......@@ -817,18 +817,16 @@ static void lan9303_bridge_ports(struct lan9303 *chip)
lan9303_alr_add_port(chip, eth_stp_addr, 0, true);
}
static int lan9303_handle_reset(struct lan9303 *chip)
static void lan9303_handle_reset(struct lan9303 *chip)
{
if (!chip->reset_gpio)
return 0;
return;
if (chip->reset_duration != 0)
msleep(chip->reset_duration);
/* release (deassert) reset and activate the device */
gpiod_set_value_cansleep(chip->reset_gpio, 0);
return 0;
}
/* stop processing packets for all ports */
......@@ -1294,15 +1292,17 @@ static int lan9303_register_switch(struct lan9303 *chip)
return dsa_register_switch(chip->ds);
}
static void lan9303_probe_reset_gpio(struct lan9303 *chip,
static int lan9303_probe_reset_gpio(struct lan9303 *chip,
struct device_node *np)
{
chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(chip->reset_gpio))
return PTR_ERR(chip->reset_gpio);
if (IS_ERR(chip->reset_gpio)) {
if (!chip->reset_gpio) {
dev_dbg(chip->dev, "No reset GPIO defined\n");
return;
return 0;
}
chip->reset_duration = 200;
......@@ -1317,6 +1317,8 @@ static void lan9303_probe_reset_gpio(struct lan9303 *chip,
/* A sane reset duration should not be longer than 1s */
if (chip->reset_duration > 1000)
chip->reset_duration = 1000;
return 0;
}
int lan9303_probe(struct lan9303 *chip, struct device_node *np)
......@@ -1326,12 +1328,12 @@ int lan9303_probe(struct lan9303 *chip, struct device_node *np)
mutex_init(&chip->indirect_mutex);
mutex_init(&chip->alr_mutex);
lan9303_probe_reset_gpio(chip, np);
ret = lan9303_handle_reset(chip);
ret = lan9303_probe_reset_gpio(chip, np);
if (ret)
return ret;
lan9303_handle_reset(chip);
ret = lan9303_check_device(chip);
if (ret)
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment