Commit 2eeaaa21 authored by Andrew Victor's avatar Andrew Victor Committed by Russell King

[ARM] 3866/1: AT91 clock update

This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.
Signed-off-by: default avatarAndrew Victor <andrew@sanpeople.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 72729910
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <asm/hardware.h> #include <asm/hardware.h>
#include "generic.h" #include "generic.h"
#include "clock.h"
static struct map_desc at91rm9200_io_desc[] __initdata = { static struct map_desc at91rm9200_io_desc[] __initdata = {
{ {
...@@ -102,9 +103,160 @@ static struct map_desc at91rm9200_io_desc[] __initdata = { ...@@ -102,9 +103,160 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
}, },
}; };
void __init at91rm9200_map_io(void) /* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk udc_clk = {
.name = "udc_clk",
.pmc_mask = 1 << AT91RM9200_ID_UDP,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ohci_clk = {
.name = "ohci_clk",
.pmc_mask = 1 << AT91RM9200_ID_UHP,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ether_clk = {
.name = "ether_clk",
.pmc_mask = 1 << AT91RM9200_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc_clk = {
.name = "mci_clk",
.pmc_mask = 1 << AT91RM9200_ID_MCI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi_clk = {
.name = "twi_clk",
.pmc_mask = 1 << AT91RM9200_ID_TWI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91RM9200_ID_US0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pmc_mask = 1 << AT91RM9200_ID_US1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pmc_mask = 1 << AT91RM9200_ID_US2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pmc_mask = 1 << AT91RM9200_ID_US3,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi_clk = {
.name = "spi_clk",
.pmc_mask = 1 << AT91RM9200_ID_SPI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioA_clk = {
.name = "pioA_clk",
.pmc_mask = 1 << AT91RM9200_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pmc_mask = 1 << AT91RM9200_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pmc_mask = 1 << AT91RM9200_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.pmc_mask = 1 << AT91RM9200_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioD_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&mmc_clk,
&udc_clk,
&twi_clk,
&spi_clk,
// ssc 0 .. ssc2
// tc0 .. tc5
&ohci_clk,
&ether_clk,
// irq0 .. irq6
};
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static struct clk pck2 = {
.name = "pck2",
.pmc_mask = AT91_PMC_PCK2,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 2,
};
static struct clk pck3 = {
.name = "pck3",
.pmc_mask = AT91_PMC_PCK3,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 3,
};
static void __init at91rm9200_register_clocks(void)
{ {
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
/* --------------------------------------------------------------------
* AT91RM9200 processor initialization
* -------------------------------------------------------------------- */
void __init at91rm9200_initialize(unsigned long main_clock)
{
/* Map peripherals */
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
/* Init clock subsystem */
at91_clock_init(main_clock);
/* Register the processor-specific clocks */
at91rm9200_register_clocks();
} }
/* /*
......
...@@ -34,7 +34,6 @@ ...@@ -34,7 +34,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata onearm_uart_config = { ...@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata onearm_uart_config = {
static void __init onearm_map_io(void) static void __init onearm_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000);
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the serial ports and console */ /* Setup the serial ports and console */
at91_init_serial(&onearm_uart_config); at91_init_serial(&onearm_uart_config);
......
...@@ -35,7 +35,6 @@ ...@@ -35,7 +35,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata carmeva_uart_config = { ...@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata carmeva_uart_config = {
static void __init carmeva_map_io(void) static void __init carmeva_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 20.000 MHz crystal */
at91rm9200_initialize(20000000);
/* Initialize clocks: 20.000 MHz crystal */
at91_clock_init(20000000);
/* Setup the serial ports and console */ /* Setup the serial ports and console */
at91_init_serial(&carmeva_uart_config); at91_init_serial(&carmeva_uart_config);
......
...@@ -34,7 +34,6 @@ ...@@ -34,7 +34,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata csb337_uart_config = { ...@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata csb337_uart_config = {
static void __init csb337_map_io(void) static void __init csb337_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 3.6864 MHz crystal */
at91rm9200_initialize(3686400);
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
/* Setup the LEDs */ /* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
......
...@@ -33,7 +33,6 @@ ...@@ -33,7 +33,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -61,10 +60,8 @@ static struct at91_uart_config __initdata csb637_uart_config = { ...@@ -61,10 +60,8 @@ static struct at91_uart_config __initdata csb637_uart_config = {
static void __init csb637_map_io(void) static void __init csb637_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 3.6864 MHz crystal */
at91rm9200_initialize(3686400);
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
/* Setup the LEDs */ /* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
......
...@@ -37,7 +37,6 @@ ...@@ -37,7 +37,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -65,10 +64,8 @@ static struct at91_uart_config __initdata dk_uart_config = { ...@@ -65,10 +64,8 @@ static struct at91_uart_config __initdata dk_uart_config = {
static void __init dk_map_io(void) static void __init dk_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000);
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the LEDs */ /* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
......
...@@ -35,7 +35,6 @@ ...@@ -35,7 +35,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata eb9200_uart_config = { ...@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata eb9200_uart_config = {
static void __init eb9200_map_io(void) static void __init eb9200_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000);
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the serial ports and console */ /* Setup the serial ports and console */
at91_init_serial(&eb9200_uart_config); at91_init_serial(&eb9200_uart_config);
......
...@@ -37,7 +37,6 @@ ...@@ -37,7 +37,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -65,10 +64,8 @@ static struct at91_uart_config __initdata ek_uart_config = { ...@@ -65,10 +64,8 @@ static struct at91_uart_config __initdata ek_uart_config = {
static void __init ek_map_io(void) static void __init ek_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000);
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the LEDs */ /* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
......
...@@ -34,7 +34,6 @@ ...@@ -34,7 +34,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata kafa_uart_config = { ...@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata kafa_uart_config = {
static void __init kafa_map_io(void) static void __init kafa_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000);
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Set up the LEDs */ /* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
......
...@@ -35,7 +35,6 @@ ...@@ -35,7 +35,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
...@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = { ...@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = {
static void __init kb9202_map_io(void) static void __init kb9202_map_io(void)
{ {
at91rm9200_map_io(); /* Initialize processor: 10 MHz crystal */
at91rm9200_initialize(10000000);
/* Initialize clocks: 10 MHz crystal */
at91_clock_init(10000000);
/* Set up the LEDs */ /* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
......
This diff is collapsed.
/*
* linux/arch/arm/mach-at91rm9200/clock.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define CLK_TYPE_PRIMARY 0x1
#define CLK_TYPE_PLL 0x2
#define CLK_TYPE_PROGRAMMABLE 0x4
#define CLK_TYPE_PERIPHERAL 0x8
struct clk {
struct list_head node;
const char *name; /* unique clock name */
const char *function; /* function of the clock */
struct device *dev; /* device associated with function */
unsigned long rate_hz;
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
unsigned id:2; /* PCK0..3, or 32k/main/a/b */
unsigned type; /* clock type */
u16 users;
};
extern int __init clk_register(struct clk *clk);
...@@ -8,6 +8,9 @@ ...@@ -8,6 +8,9 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
/* Processors */
extern void __init at91rm9200_initialize(unsigned long main_clock);
/* Interrupts */ /* Interrupts */
extern void __init at91rm9200_init_irq(unsigned int priority[]); extern void __init at91rm9200_init_irq(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]);
...@@ -17,9 +20,6 @@ extern void __init at91_gpio_irq_setup(unsigned banks); ...@@ -17,9 +20,6 @@ extern void __init at91_gpio_irq_setup(unsigned banks);
struct sys_timer; struct sys_timer;
extern struct sys_timer at91rm9200_timer; extern struct sys_timer at91rm9200_timer;
/* Memory Map */
extern void __init at91rm9200_map_io(void);
/* Clocks */ /* Clocks */
extern int __init at91_clock_init(unsigned long main_clock); extern int __init at91_clock_init(unsigned long main_clock);
struct device; struct device;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment