staging: rtl8723au: odm_ConfigBB_PHY_8723A() always issues 32 bit writes

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8723au/hal/HalHWImg8723A_BB.c

@@ -236,7 +236,7 @@ void ODM_ReadAndConfig_AGC_TAB_1T_8723A(struct dm_odm_t *pDM_Odm)
 			continue;
 		} else {
 			if (!CheckCondition(Array[i], hex)) {
-				/*  Discard the following (offset, data) pairs. */
+				/* Discard the following (offset, data) pairs */
 				READ_NEXT_PAIR(v1, v2, i);
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
@@ -244,7 +244,8 @@ void ODM_ReadAndConfig_AGC_TAB_1T_8723A(struct dm_odm_t *pDM_Odm)
 					READ_NEXT_PAIR(v1, v2, i);
 				i -= 2; /*  prevent from for-loop += 2 */
 			} else {
-				/*  Configure matched pairs and skip to end of if-else. */
+				/*  Configure matched pairs and skip to
+				    end of if-else. */
 				READ_NEXT_PAIR(v1, v2, i);
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
@@ -479,11 +480,11 @@ void ODM_ReadAndConfig_PHY_REG_1T_8723A(struct dm_odm_t *pDM_Odm)
 
 		/*  This (offset, data) pair meets the condition. */
 		if (v1 < 0xCDCDCDCD) {
-			odm_ConfigBB_PHY_8723A(pDM_Odm, v1, bMaskDWord, v2);
+			odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
 			continue;
 		} else {
 			if (!CheckCondition(Array[i], hex)) {
-				/*  Discard the following (offset, data) pairs. */
+				/* Discard the following (offset, data) pairs */
 				READ_NEXT_PAIR(v1, v2, i);
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
@@ -491,12 +492,13 @@ void ODM_ReadAndConfig_PHY_REG_1T_8723A(struct dm_odm_t *pDM_Odm)
 					READ_NEXT_PAIR(v1, v2, i);
 				i -= 2; /*  prevent from for-loop += 2 */
 			} else {
-				/*  Configure matched pairs and skip to end of if-else. */
+				/*  Configure matched pairs and skip to
+				    end of if-else. */
 				READ_NEXT_PAIR(v1, v2, i);
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
 				       v2 != 0xCDCD && i < ArrayLen - 2) {
-					odm_ConfigBB_PHY_8723A(pDM_Odm, v1, bMaskDWord, v2);
+					odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
 					READ_NEXT_PAIR(v1, v2, i);
 				}
 				while (v2 != 0xDEAD && i < ArrayLen - 2)
@@ -518,7 +520,7 @@ static u32 Array_PHY_REG_MP_8723A[] = {
 void ODM_ReadAndConfig_PHY_REG_MP_8723A(struct dm_odm_t *pDM_Odm)
 {
 	u32 hex = 0;
-	u32     i           = 0;
+	u32 i;
 	u8 platform = 0x04;
 	u8 board = pDM_Odm->BoardType;
 	u32 ArrayLen = sizeof(Array_PHY_REG_MP_8723A)/sizeof(u32);
@@ -534,11 +536,11 @@ void ODM_ReadAndConfig_PHY_REG_MP_8723A(struct dm_odm_t *pDM_Odm)
 
 		/*  This (offset, data) pair meets the condition. */
 		if (v1 < 0xCDCDCDCD) {
-			odm_ConfigBB_PHY_8723A(pDM_Odm, v1, bMaskDWord, v2);
+			odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
 			continue;
 		} else {
 			if (!CheckCondition(Array[i], hex)) {
-				/* Discard the following (offset, data) pairs. */
+				/* Discard the following (offset, data) pairs */
 				READ_NEXT_PAIR(v1, v2, i);
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
@@ -546,12 +548,13 @@ void ODM_ReadAndConfig_PHY_REG_MP_8723A(struct dm_odm_t *pDM_Odm)
 					READ_NEXT_PAIR(v1, v2, i);
 				i -= 2; /*  prevent from for-loop += 2 */
 			} else {
-				/* Configure matched pairs and skip to end of if-else. */
+				/* Configure matched pairs and skip to
+				   end of if-else. */
 				READ_NEXT_PAIR(v1, v2, i);
 				while (v2 != 0xDEAD &&
 				       v2 != 0xCDEF &&
 				       v2 != 0xCDCD && i < ArrayLen - 2) {
-					odm_ConfigBB_PHY_8723A(pDM_Odm, v1, bMaskDWord, v2);
+					odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
 					READ_NEXT_PAIR(v1, v2, i);
 				}
 				while (v2 != 0xDEAD && i < ArrayLen - 2)

drivers/staging/rtl8723au/hal/odm_RegConfig8723A.c

@@ -66,33 +66,27 @@ void odm_ConfigBB_AGC_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data)
 }
 
 void
-odm_ConfigBB_PHY_8723A(
-	struct dm_odm_t *pDM_Odm,
-	u32		Addr,
-	u32		Bitmask,
-	u32		Data
-  )
+odm_ConfigBB_PHY_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data)
 {
-	if (Addr == 0xfe)
+	if (addr == 0xfe)
 		msleep(50);
-	else if (Addr == 0xfd)
+	else if (addr == 0xfd)
 		mdelay(5);
-	else if (Addr == 0xfc)
+	else if (addr == 0xfc)
 		mdelay(1);
-	else if (Addr == 0xfb)
+	else if (addr == 0xfb)
 		udelay(50);
-	else if (Addr == 0xfa)
+	else if (addr == 0xfa)
 		udelay(5);
-	else if (Addr == 0xf9)
+	else if (addr == 0xf9)
 		udelay(1);
-	else if (Addr == 0xa24)
-		pDM_Odm->RFCalibrateInfo.RegA24 = Data;
-	ODM_SetBBReg(pDM_Odm, Addr, Bitmask, Data);
+	else if (addr == 0xa24)
+		pDM_Odm->RFCalibrateInfo.RegA24 = data;
+	rtl8723au_write32(pDM_Odm->Adapter, addr, data);
 
 	/*  Add 1us delay between BB/RF register setting. */
 	udelay(1);
 
 	ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
-		     ("===> ODM_ConfigBBWithHeaderFile23a: [PHY_REG] %08X %08X\n",
-		     Addr, Data));
+		     ("===> %s: [PHY_REG] %08X %08X\n", __func__, addr, data));
 }

drivers/staging/rtl8723au/include/odm_RegConfig8723A.h

@@ -22,6 +22,6 @@ void odm_ConfigMAC_8723A(struct dm_odm_t *pDM_Odm, u32 Addr, u8 Data);
 
 void odm_ConfigBB_AGC_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data);
 
-void odm_ConfigBB_PHY_8723A(struct dm_odm_t *pDM_Odm, u32 Addr, u32 Bitmask, u32 Data);
+void odm_ConfigBB_PHY_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data);
 
 #endif /*  end of SUPPORT */