Commit 2f3dfaf5 authored by Mark Brown's avatar Mark Brown Committed by Jaroslav Kysela

sound: ASoC: Add WM8750 SPI support

Implement SPI support for WM8750, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Also fix a cut'n'pasted comment in the I2C side of the driver (which was
clearly written in the same way) while we're at it.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
parent ccbc301e
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <sound/core.h> #include <sound/core.h>
#include <sound/pcm.h> #include <sound/pcm.h>
#include <sound/pcm_params.h> #include <sound/pcm_params.h>
...@@ -841,7 +842,7 @@ static struct snd_soc_device *wm8750_socdev; ...@@ -841,7 +842,7 @@ static struct snd_soc_device *wm8750_socdev;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/* /*
* WM8731 2 wire address is determined by GPIO5 * WM8750 2 wire address is determined by GPIO5
* state during powerup. * state during powerup.
* low = 0x1a * low = 0x1a
* high = 0x1b * high = 0x1b
...@@ -928,6 +929,62 @@ static int wm8750_add_i2c_device(struct platform_device *pdev, ...@@ -928,6 +929,62 @@ static int wm8750_add_i2c_device(struct platform_device *pdev,
} }
#endif #endif
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8750_spi_probe(struct spi_device *spi)
{
struct snd_soc_device *socdev = wm8750_socdev;
struct snd_soc_codec *codec = socdev->codec;
int ret;
codec->control_data = spi;
ret = wm8750_init(socdev);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8750\n");
return ret;
}
static int __devexit wm8750_spi_remove(struct spi_device *spi)
{
return 0;
}
static struct spi_driver wm8750_spi_driver = {
.driver = {
.name = "wm8750",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8750_spi_probe,
.remove = __devexit_p(wm8750_spi_remove),
};
static int wm8750_spi_write(struct spi_device *spi, const char *data, int len)
{
struct spi_transfer t;
struct spi_message m;
u8 msg[2];
if (len <= 0)
return 0;
msg[0] = data[0];
msg[1] = data[1];
spi_message_init(&m);
memset(&t, 0, (sizeof t));
t.tx_buf = &msg[0];
t.len = len;
spi_message_add_tail(&t, &m);
spi_sync(spi, &m);
return len;
}
#endif
static int wm8750_probe(struct platform_device *pdev) static int wm8750_probe(struct platform_device *pdev)
{ {
struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_device *socdev = platform_get_drvdata(pdev);
...@@ -963,6 +1020,14 @@ static int wm8750_probe(struct platform_device *pdev) ...@@ -963,6 +1020,14 @@ static int wm8750_probe(struct platform_device *pdev)
ret = wm8750_add_i2c_device(pdev, setup); ret = wm8750_add_i2c_device(pdev, setup);
} }
#endif #endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
codec->hw_write = (hw_write_t)wm8750_spi_write;
ret = spi_register_driver(&wm8750_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
}
#endif
if (ret != 0) { if (ret != 0) {
kfree(codec->private_data); kfree(codec->private_data);
...@@ -1004,6 +1069,9 @@ static int wm8750_remove(struct platform_device *pdev) ...@@ -1004,6 +1069,9 @@ static int wm8750_remove(struct platform_device *pdev)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_unregister_device(codec->control_data); i2c_unregister_device(codec->control_data);
i2c_del_driver(&wm8750_i2c_driver); i2c_del_driver(&wm8750_i2c_driver);
#endif
#if defined(CONFIG_SPI_MASTER)
spi_unregister_driver(&wm8750_spi_driver);
#endif #endif
kfree(codec->private_data); kfree(codec->private_data);
kfree(codec); kfree(codec);
......
...@@ -58,6 +58,7 @@ ...@@ -58,6 +58,7 @@
#define WM8750_SYSCLK 0 #define WM8750_SYSCLK 0
struct wm8750_setup_data { struct wm8750_setup_data {
int spi;
int i2c_bus; int i2c_bus;
unsigned short i2c_address; unsigned short i2c_address;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment