[PATCH] USB: SN9C10x driver updates

SN9C10x driver updates.

Changes: + new, - removed, * cleanup, @ bugfix

@ Fix stream_interrupt()
@ Fix vidioc_enum_input() and split vidioc_gs_input()
@ Need usb_get|put_dev() when disconnecting, if the device is open
* Use wait_event_interruptible_timeout() instead of wait_event_interruptible()
  when waiting for video frames
* replace wake_up_interruptible(&wait_stream) with wake_up(&wait_stream)
* Cleanups and updates in the documentation
+ Use per-device sensor structures
+ Add support for PAS202BCA image sensors
+ Add frame_timeout module parameter
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation/usb/sn9c102.txt

@@ -196,6 +196,14 @@ Description:    Force the application to unmap previously mapped buffer memory
                 1 = force memory unmapping (save memory)
 Default:        0
 -------------------------------------------------------------------------------
+Name:           frame_timeout
+Type:           uint array (min = 0, max = 64)
+Syntax:         <n[,...]>
+Description:    Timeout for a video frame in seconds. This parameter is
+                specific for each detected camera. This parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
 Name:           debug
 Type:           ushort
 Syntax:         <n> 
@@ -321,6 +329,7 @@ Vendor ID  Product ID
 ---------  ----------
 0x0c45     0x6001
 0x0c45     0x6005
+0x0c45     0x6007
 0x0c45     0x6009
 0x0c45     0x600d
 0x0c45     0x6024
@@ -370,6 +379,7 @@ HV7131D     Hynix Semiconductor, Inc.
 MI-0343     Micron Technology, Inc.
 OV7630      OmniVision Technologies, Inc.
 PAS106B     PixArt Imaging, Inc.
+PAS202BCA   PixArt Imaging, Inc.
 PAS202BCB   PixArt Imaging, Inc.
 TAS5110C1B  Taiwan Advanced Sensor Corporation
 TAS5130D1B  Taiwan Advanced Sensor Corporation
@@ -493,6 +503,7 @@ Many thanks to following persons for their contribute (listed in alphabetical
 order):
 
 - Luca Capello for the donation of a webcam;
+- Philippe Coval for having helped testing the PAS202BCA image sensor;
 - Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
   donation of a webcam;
 - Jon Hollstrom for the donation of a webcam;

drivers/usb/media/Makefile

@@ -2,7 +2,10 @@
 # Makefile for USB Media drivers
 #
 
-sn9c102-objs	:= sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
+sn9c102-objs	:= sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \
+		   sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \
+		   sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
+		   sn9c102_tas5130d1b.o
 et61x251-objs	:= et61x251_core.o et61x251_tas5130d1b.o
 zc0301-objs	:= zc0301_core.o zc0301_pas202bcb.o
 

drivers/usb/media/sn9c102.h

@@ -34,7 +34,8 @@
 #include <linux/param.h>
 #include <linux/rwsem.h>
 #include <linux/mutex.h>
-#include <asm/semaphore.h>
+#include <linux/string.h>
+#include <linux/stddef.h>
 
 #include "sn9c102_sensor.h"
 
@@ -51,6 +52,7 @@
 #define SN9C102_ALTERNATE_SETTING 8
 #define SN9C102_URB_TIMEOUT       msecs_to_jiffies(2 * SN9C102_ISO_PACKETS)
 #define SN9C102_CTRL_TIMEOUT      300
+#define SN9C102_FRAME_TIMEOUT     2
 
 /*****************************************************************************/
 
@@ -108,6 +110,7 @@ struct sn9c102_sysfs_attr {
 
 struct sn9c102_module_param {
 	u8 force_munmap;
+	u16 frame_timeout;
 };
 
 static DEFINE_MUTEX(sn9c102_sysfs_lock);
@@ -117,7 +120,7 @@ struct sn9c102_device {
 	struct video_device* v4ldev;
 
 	enum sn9c102_bridge bridge;
-	struct sn9c102_sensor* sensor;
+	struct sn9c102_sensor sensor;
 
 	struct usb_device* usbdev;
 	struct urb* urb[SN9C102_URBS];
@@ -149,12 +152,21 @@ struct sn9c102_device {
 
 /*****************************************************************************/
 
+struct sn9c102_device*
+sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id)
+{
+	if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
+		return cam;
+
+	return NULL;
+}
+
+
 void
 sn9c102_attach_sensor(struct sn9c102_device* cam,
                       struct sn9c102_sensor* sensor)
 {
-	cam->sensor = sensor;
-	cam->sensor->usbdev = cam->usbdev;
+	memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor));
 }
 
 /*****************************************************************************/
@@ -197,7 +209,8 @@ do {                                                                          \
 
 #undef PDBG
 #define PDBG(fmt, args...)                                                    \
-dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
+dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",                              \
+         __FUNCTION__, __LINE__ , ## args)
 
 #undef PDBGG
 #define PDBGG(fmt, args...) do {;} while(0) /* placeholder */

drivers/usb/media/sn9c102_ov7630.c

@@ -34,8 +34,8 @@ static int ov7630_init(struct sn9c102_device* cam)
 	err += sn9c102_write_reg(cam, 0x0f, 0x18);
 	err += sn9c102_write_reg(cam, 0x50, 0x19);
 
-	err += sn9c102_i2c_write(cam, 0x12, 0x8d);
-	err += sn9c102_i2c_write(cam, 0x11, 0x00);
+	err += sn9c102_i2c_write(cam, 0x12, 0x80);
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
 	err += sn9c102_i2c_write(cam, 0x15, 0x34);
 	err += sn9c102_i2c_write(cam, 0x16, 0x03);
 	err += sn9c102_i2c_write(cam, 0x17, 0x1c);
@@ -43,12 +43,14 @@ static int ov7630_init(struct sn9c102_device* cam)
 	err += sn9c102_i2c_write(cam, 0x19, 0x06);
 	err += sn9c102_i2c_write(cam, 0x1a, 0xf6);
 	err += sn9c102_i2c_write(cam, 0x1b, 0x04);
-	err += sn9c102_i2c_write(cam, 0x20, 0x44);
+	err += sn9c102_i2c_write(cam, 0x20, 0xf6);
 	err += sn9c102_i2c_write(cam, 0x23, 0xee);
 	err += sn9c102_i2c_write(cam, 0x26, 0xa0);
 	err += sn9c102_i2c_write(cam, 0x27, 0x9a);
-	err += sn9c102_i2c_write(cam, 0x28, 0x20);
+	err += sn9c102_i2c_write(cam, 0x28, 0xa0);
 	err += sn9c102_i2c_write(cam, 0x29, 0x30);
+	err += sn9c102_i2c_write(cam, 0x2a, 0xa0);
+	err += sn9c102_i2c_write(cam, 0x2b, 0x1f);
 	err += sn9c102_i2c_write(cam, 0x2f, 0x3d);
 	err += sn9c102_i2c_write(cam, 0x30, 0x24);
 	err += sn9c102_i2c_write(cam, 0x32, 0x86);
@@ -80,7 +82,7 @@ static int ov7630_set_ctrl(struct sn9c102_device* cam,
 		err += sn9c102_i2c_write(cam, 0x02, ctrl->value);
 		break;
 	case V4L2_CID_BLUE_BALANCE:
-		err += sn9c102_i2c_write(cam, 0x03, ctrl->value);
+		err += sn9c102_i2c_write(cam, 0x01, ctrl->value);
 		break;
 	case V4L2_CID_GAIN:
 		err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
@@ -108,7 +110,7 @@ static int ov7630_set_ctrl(struct sn9c102_device* cam,
 		err += sn9c102_i2c_write(cam, 0x0d, ctrl->value);
 		break;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x09);
+		err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x78);
 		break;
 	case V4L2_CID_AUTOGAIN:
 		err += sn9c102_i2c_write(cam, 0x13, ctrl->value);
@@ -371,26 +373,29 @@ static struct sn9c102_sensor ov7630 = {
 
 int sn9c102_probe_ov7630(struct sn9c102_device* cam)
 {
+	const struct usb_device_id ov7630_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x602c), },
+		{ USB_DEVICE(0x0c45, 0x602d), },
+		{ USB_DEVICE(0x0c45, 0x608f), },
+		{ USB_DEVICE(0x0c45, 0x60b0), },
+		{ }
+	};
 	int err = 0;
 
-	sn9c102_attach_sensor(cam, &ov7630);
-
-	if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c &&
-	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602d &&
-	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
-	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x60b0)
+	if (!sn9c102_match_id(cam, ov7630_id_table))
 		return -ENODEV;
 
 	err += sn9c102_write_reg(cam, 0x01, 0x01);
 	err += sn9c102_write_reg(cam, 0x00, 0x01);
 	err += sn9c102_write_reg(cam, 0x28, 0x17);
-
 	if (err)
 		return -EIO;
 
-	err += sn9c102_i2c_write(cam, 0x0b, 0);
+	err += sn9c102_i2c_try_write(cam, &ov7630, 0x0b, 0);
 	if (err)
 		return -ENODEV;
 
+	sn9c102_attach_sensor(cam, &ov7630);
+
 	return 0;
 }

drivers/usb/media/sn9c102_pas202bca.c

+/***************************************************************************
+ * Plug-in for PAS202BCA image sensor connected to the SN9C10x PC Camera   *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/delay.h>
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor pas202bca;
+
+
+static int pas202bca_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x10);
+	err += sn9c102_write_reg(cam, 0x00, 0x11);
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x20, 0x17);
+	err += sn9c102_write_reg(cam, 0x30, 0x19);
+	err += sn9c102_write_reg(cam, 0x09, 0x18);
+
+	err += sn9c102_i2c_write(cam, 0x02, 0x14);
+	err += sn9c102_i2c_write(cam, 0x03, 0x40);
+	err += sn9c102_i2c_write(cam, 0x0d, 0x2c);
+	err += sn9c102_i2c_write(cam, 0x0e, 0x01);
+	err += sn9c102_i2c_write(cam, 0x0f, 0xa9);
+	err += sn9c102_i2c_write(cam, 0x10, 0x08);
+	err += sn9c102_i2c_write(cam, 0x13, 0x63);
+	err += sn9c102_i2c_write(cam, 0x15, 0x70);
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+
+	msleep(400);
+
+	return err;
+}
+
+
+static int pas202bca_set_pix_format(struct sn9c102_device* cam,
+                                    const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x24, 0x17);
+	else
+		err += sn9c102_write_reg(cam, 0x20, 0x17);
+
+	return err;
+}
+
+
+static int pas202bca_set_ctrl(struct sn9c102_device* cam,
+                              const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6);
+		err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x07, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GREEN_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x08, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
+		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+	err += sn9c102_i2c_write(cam, 0x11, 0x01);
+
+	return err ? -EIO : 0;
+}
+
+
+static int pas202bca_set_crop(struct sn9c102_device* cam,
+                              const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &pas202bca;
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor pas202bca = {
+	.name = "PAS202BCA",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x40,
+	.init = &pas202bca_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x01e5,
+			.maximum = 0x3fff,
+			.step = 0x0001,
+			.default_value = 0x01e5,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x1f,
+			.step = 0x01,
+			.default_value = 0x0c,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x05,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "green balance",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "DAC magnitude",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x04,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &pas202bca_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &pas202bca_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &pas202bca_set_pix_format
+};
+
+
+int sn9c102_probe_pas202bca(struct sn9c102_device* cam)
+{
+	const struct usb_device_id pas202bca_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x60af), },
+		{ }
+	};
+	int err = 0;
+
+	if (!sn9c102_match_id(cam,pas202bca_id_table))
+		return -ENODEV;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x40, 0x01);
+	err += sn9c102_write_reg(cam, 0x28, 0x17);
+	if (err)
+		return -EIO;
+
+	if (sn9c102_i2c_try_write(cam, &pas202bca, 0x10, 0)) /* try to write */
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &pas202bca);
+
+	return 0;
+}

drivers/usb/media/sn9c102_sensor.h

@@ -66,6 +66,7 @@ extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
 extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
 extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
 extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam);
 extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
 extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
 extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
@@ -81,12 +82,17 @@ static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {              \
 	&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */    \
 	&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */  \
 	&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */    \
+	&sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \
 	&sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */    \
 	&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */       \
 	&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */       \
 	NULL,                                                                 \
 };
 
+/* Device identification */
+extern struct sn9c102_device*
+sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id);
+
 /* Attach a probed sensor to the camera. */
 extern void 
 sn9c102_attach_sensor(struct sn9c102_device* cam,
@@ -108,6 +114,7 @@ sn9c102_attach_sensor(struct sn9c102_device* cam,
 static const struct usb_device_id sn9c102_id_table[] = {                      \
 	{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */                     \
 	{ USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */                     \
+	{ USB_DEVICE(0x0c45, 0x6007), },                                      \
 	{ USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */                        \
 	{ USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */                        \
 	{ USB_DEVICE(0x0c45, 0x6024), },                                      \
@@ -126,7 +133,7 @@ static const struct usb_device_id sn9c102_id_table[] = {                      \
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), },                        \
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), },                        \
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), },                        \
-	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131x */          \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */         \
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */         \
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */           \
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), },                        \
@@ -359,12 +366,6 @@ struct sn9c102_sensor {
 	   error code without rolling back.
 	*/
 
-	const struct usb_device* usbdev;
-	/*
-	   Points to the usb_device struct after the sensor is attached.
-	   Do not touch unless you know what you are doing.
-	*/
-
 	/*
 	   Do NOT write to the data below, it's READ ONLY. It is used by the
 	   core module to store successfully updated values of the above

drivers/usb/media/sn9c102_tas5110c1b.c

@@ -142,14 +142,18 @@ static struct sn9c102_sensor tas5110c1b = {
 
 int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam)
 {
-	/* This sensor has no identifiers, so let's attach it anyway */
-	sn9c102_attach_sensor(cam, &tas5110c1b);
+	const struct usb_device_id tas5110c1b_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x6001), },
+		{ USB_DEVICE(0x0c45, 0x6005), },
+		{ USB_DEVICE(0x0c45, 0x60ab), },
+		{ }
+	};
 
 	/* Sensor detection is based on USB pid/vid */
-	if (le16_to_cpu(tas5110c1b.usbdev->descriptor.idProduct) != 0x6001 &&
-	    le16_to_cpu(tas5110c1b.usbdev->descriptor.idProduct) != 0x6005 &&
-	    le16_to_cpu(tas5110c1b.usbdev->descriptor.idProduct) != 0x60ab)
+	if (!sn9c102_match_id(cam, tas5110c1b_id_table))
 		return -ENODEV;
 
+	sn9c102_attach_sensor(cam, &tas5110c1b);
+
 	return 0;
 }

drivers/usb/media/sn9c102_tas5130d1b.c

@@ -153,13 +153,17 @@ static struct sn9c102_sensor tas5130d1b = {
 
 int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam)
 {
-	/* This sensor has no identifiers, so let's attach it anyway */
-	sn9c102_attach_sensor(cam, &tas5130d1b);
+	const struct usb_device_id tas5130d1b_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x6025), },
+		{ USB_DEVICE(0x0c45, 0x60aa), },
+		{ }
+	};
 
 	/* Sensor detection is based on USB pid/vid */
-	if (le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x6025 &&
-	    le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x60aa)
+	if (!sn9c102_match_id(cam, tas5130d1b_id_table))
 		return -ENODEV;
 
+	sn9c102_attach_sensor(cam, &tas5130d1b);
+
 	return 0;
 }