ARM: dts: orion5x: split linkstation lswtgl into common and device parts

In order to support more linkstation devices, common part of current
.dts file goes into .dtsi file. Some .dtsi start with "mvebu-" prefix
because other kirkwood based linkstation devices are similar, and
will be migrated to use these .dtsi some time later.
  - orion5x-linkstation.dtsi
  - mvebu-linkstation-fan.dtsi
  - mvebu-linkstation-gpio-simple.dtsi
while all rest part remains in device specific .dts file:
  - orion5x-linkstation-lswtgl.dts
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm/boot/dts/mvebu-linkstation-fan.dtsi

+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpio-fan,speed-map =
+			<0		3
+			1500	2
+			3250	1
+			5000	0>;
+	};
+};
+
+&pinctrl {
+	pmx_fan_low: pmx-fan-low {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,function = "gpio";
+	};
+};

arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi

+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_switch>;
+		pinctrl-names = "default";
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			default-state = "keep";
+		};
+
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_switch: pmx-power-switch {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,function = "gpio";
+	};
+};

arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts

@@ -45,9 +45,10 @@
 
 /dts-v1/;
 
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "orion5x-mv88f5182.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-WTGL";
@@ -58,247 +59,93 @@ memory { /* 64 MB */
 		reg = <0x00000000 0x4000000>;
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-
-		internal-regs {
-			pinctrl: pinctrl@10000 {
-				pinctrl-names = "default";
-
-				pmx_led_power: pmx-leds {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_led_alarm: pmx-leds {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_led_info: pmx-leds {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_power_hdd: pmx-power-hdd {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_usb_power: pmx-usb-power {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_sata0: pmx-sata0 {
-					marvell,pins = "mpp12";
-					marvell,function = "sata0";
-				};
-
-				pmx_sata1: pmx-sata1 {
-					marvell,pins = "mpp13";
-					marvell,function = "sata1";
-				};
-
-				pmx_fan_high: pmx-fan-high {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_fan_low: pmx-fan-low {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_fan_lock: pmx-fan-lock {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_power_switch: pmx-power-switch {
-					marvell,pins = "mpp8", "mpp10";
-					marvell,function = "gpio";
-				};
-			};
-		};
-	};
-
 	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_switch>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
+		power-on-switch {
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
+		power-auto-switch {
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_alarm
-			     &pmx_led_info>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "lswtgl:blue:power";
+		blue-power-led {
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
 		};
 
-		led@2 {
-			label = "lswtgl:red:alarm";
+		red-alarm-led {
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		led@3 {
-			label = "lswtgl:amber:info";
+		amber-info-led {
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
 		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
 			 &gpio0 17 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
 		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	};
+};
 
-	restart_poweroff {
-		compatible = "restart-poweroff";
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
 	};
 
-		hdd_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		};
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
 	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-	devbus,keep-config;
 
-	flash@0 {
-		compatible = "jedec-flash";
-		reg = <0 0x40000>;
-		bank-width = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			header@0 {
-				reg = <0 0x30000>;
-				read-only;
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
 	};
 
-			uboot@30000 {
-				reg = <0x30000 0xF000>;
-				read-only;
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
 	};
 
-			uboot_env@3F000 {
-				reg = <0x3F000 0x1000>;
-			};
-		};
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10";
+		marvell,function = "gpio";
 	};
-};
-
-&mdio {
-	status = "okay";
 
-	ethphy: ethernet-phy {
-		reg = <8>;
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
 	};
-};
-
-&eth {
-	status = "okay";
 
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
 	};
-};
 
-&ehci0 {
-	status = "okay";
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
 };
 
-&i2c {
-	status = "okay";
-
-	rtc {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-	};
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
 };
 
-&wdt {
-	status = "disabled";
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 };
 
 &sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
 	nr-ports = <2>;
 };
-
-&uart0 {
-	status = "okay";
-};

arch/arm/boot/dts/orion5x-linkstation.dtsi

+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	rtc {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&wdt {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};