Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Things are calming down nicely here w.r.t. fixes.  This batch
  includes two week's worth since I missed to send before -rc4.

  Nothing particularly scary to point out, smaller fixes here and there.
  Shortlog describes it pretty well"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: keystone: fix dt bindings to use post div register for mainpll
  ARM: nomadik: disable UART0 on Nomadik boards
  ARM: dts: i.MX35: Fix can support.
  ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
  ARM: dts: add CPU OPP and regulator supply property for exynos4210
  ARM: dts: Update video-phy node with syscon phandle for exynos3250
  ARM: DRA7: hwmod: fix gpmc hwmod

arch/arm/boot/dts/exynos3250.dtsi

@@ -138,8 +138,8 @@ pmu_system_controller: system-controller@10020000 {
 
 		mipi_phy: video-phy@10020710 {
 			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10020710 8>;
 			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
 		};
 
 		pd_cam: cam-power-domain@10023C00 {

arch/arm/boot/dts/exynos4210-origen.dts

@@ -127,6 +127,10 @@ timing0: timing {
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck1_reg>;
+};
+
 &fimd {
 	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
 	pinctrl-names = "default";

arch/arm/boot/dts/exynos4210-trats.dts

@@ -188,6 +188,10 @@ fimc_3: fimc@11830000 {
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
 &dsi_0 {
 	vddcore-supply = <&vusb_reg>;
 	vddio-supply = <&vmipi_reg>;

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -548,6 +548,10 @@ i2c@138E0000 {
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
 &pinctrl_1 {
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";

arch/arm/boot/dts/exynos4210.dtsi

@@ -40,6 +40,18 @@ cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x900>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
 			cooling-min-level = <4>;
 			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */

arch/arm/boot/dts/imx35.dtsi

@@ -286,8 +286,8 @@ wdog: wdog@53fdc000 {
 			can1: can@53fe4000 {
 				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>;
-				clock-names = "ipg";
+				clocks = <&clks 33>, <&clks 33>;
+				clock-names = "ipg", "per";
 				interrupts = <43>;
 				status = "disabled";
 			};
@@ -295,8 +295,8 @@ can1: can@53fe4000 {
 			can2: can@53fe8000 {
 				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>;
-				clock-names = "ipg";
+				clocks = <&clks 34>, <&clks 34>;
+				clock-names = "ipg", "per";
 				interrupts = <44>;
 				status = "disabled";
 			};

arch/arm/boot/dts/k2e-clocks.dtsi

@@ -13,9 +13,8 @@ mainpllclk: mainpllclk@2310110 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
 	};
 
 	papllclk: papllclk@2620358 {

arch/arm/boot/dts/k2hk-clocks.dtsi

@@ -22,9 +22,8 @@ mainpllclk: mainpllclk@2310110 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
 	};
 
 	papllclk: papllclk@2620358 {

arch/arm/boot/dts/k2l-clocks.dtsi

@@ -22,9 +22,8 @@ mainpllclk: mainpllclk@2310110 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
 	};
 
 	papllclk: papllclk@2620358 {

arch/arm/boot/dts/ste-nomadik-nhk15.dts

@@ -17,6 +17,7 @@ chosen {
 	};
 
 	aliases {
+		serial1 = &uart1;
 		stmpe-i2c0 = &stmpe0;
 		stmpe-i2c1 = &stmpe1;
 	};

arch/arm/boot/dts/ste-nomadik-s8815.dts

@@ -15,6 +15,10 @@ chosen {
 		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
 	};
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	src@101e0000 {
 		/* These chrystal drivers are not used on this board */
 		disable-sxtalo;

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -757,6 +757,7 @@ uart0: uart@101fd000 {
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_default_mux>;
+			status = "disabled";
 		};
 
 		uart1: uart@101fb000 {

arch/arm/mach-omap2/omap_hwmod.c

@@ -2373,6 +2373,9 @@ static int of_dev_hwmod_lookup(struct device_node *np,
  * registers.  This address is needed early so the OCP registers that
  * are part of the device's address space can be ioremapped properly.
  *
+ * If SYSC access is not needed, the registers will not be remapped
+ * and non-availability of MPU access is not treated as an error.
+ *
  * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
  * -ENXIO on absent or invalid register target address space.
  */
@@ -2387,6 +2390,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 
 	_save_mpu_port_index(oh);
 
+	/* if we don't need sysc access we don't need to ioremap */
+	if (!oh->class->sysc)
+		return 0;
+
+	/* we can't continue without MPU PORT if we need sysc access */
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
 		return -ENXIO;
 
@@ -2396,8 +2404,10 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 			 oh->name);
 
 		/* Extract the IO space from device tree blob */
-		if (!np)
+		if (!np) {
+			pr_err("omap_hwmod: %s: no dt node\n", oh->name);
 			return -ENXIO;
+		}
 
 		va_start = of_iomap(np, index + oh->mpu_rt_idx);
 	} else {
@@ -2456,14 +2466,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 				oh->name, np->name);
 	}
 
-	if (oh->class->sysc) {
 	r = _init_mpu_rt_base(oh, NULL, index, np);
 	if (r < 0) {
 		WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
 		     oh->name);
 		return 0;
 	}
-	}
 
 	r = _init_clocks(oh, NULL);
 	if (r < 0) {

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -827,8 +827,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -844,7 +843,7 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = {
 	.class		= &dra7xx_gpmc_hwmod_class,
 	.clkdm_name	= "l3main1_clkdm",
 	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
-	.flags		= HWMOD_SWSUP_SIDLE | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
+	.flags		= DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {