Commit 30d53abd authored by Grzegorz Jaszczyk's avatar Grzegorz Jaszczyk Committed by Gregory CLEMENT

arm64: dts: marvell: Add AP807-quad cache description

Adding appropriate entries to device-tree allows the cache description
to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/.
Signed-off-by: default avatarGrzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@bootlin.com>
parent 760cabcd
......@@ -22,6 +22,13 @@ cpu0: cpu@0 {
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 0>;
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2_0>;
};
cpu1: cpu@1 {
device_type = "cpu";
......@@ -30,6 +37,13 @@ cpu1: cpu@1 {
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 0>;
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2_0>;
};
cpu2: cpu@100 {
device_type = "cpu";
......@@ -38,6 +52,13 @@ cpu2: cpu@100 {
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 1>;
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
};
cpu3: cpu@101 {
device_type = "cpu";
......@@ -46,6 +67,27 @@ cpu3: cpu@101 {
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 1>;
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
};
l2_0: l2-cache0 {
compatible = "cache";
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
l2_1: l2-cache1 {
compatible = "cache";
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment