Merge pobox.com:/garz/repo/linux-2.6

into pobox.com:/garz/repo/libata-2.6

arch/m32r/defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:49 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:44 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -81,6 +83,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 # CONFIG_SMP is not set
@@ -96,7 +99,6 @@ CONFIG_PREEMPT=y
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -146,10 +148,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -162,6 +166,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -219,12 +224,12 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -396,6 +401,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -450,7 +456,6 @@ CONFIG_DS1302=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -524,6 +529,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -536,11 +542,25 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -558,6 +578,10 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -628,7 +652,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -697,7 +720,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -711,6 +735,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/kernel/process.c

 /*
  *  linux/arch/m32r/kernel/process.c
- *    orig : sh
  *
  *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
  *                            Hitoshi Yamamoto
@@ -290,13 +289,16 @@ asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
 }
 
 asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
-	unsigned long r2, unsigned long r3, unsigned long r4, unsigned long r5,
-	unsigned long r6, struct pt_regs regs)
+			 unsigned long parent_tidptr,
+			 unsigned long child_tidptr,
+			 unsigned long r4, unsigned long r5, unsigned long r6,
+			 struct pt_regs regs)
 {
 	if (!newsp)
 		newsp = regs.spu;
 
-	return do_fork(clone_flags, newsp, &regs, 0, NULL, NULL);
+	return do_fork(clone_flags, newsp, &regs, 0,
+		       (int __user *)parent_tidptr, (int __user *)child_tidptr);
 }
 
 /*
@@ -320,9 +322,10 @@ asmlinkage int sys_vfork(unsigned long r0, unsigned long r1, unsigned long r2,
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv, char __user * __user *uenvp,
-  unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
-  struct pt_regs regs)
+asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
+			  char __user * __user *uenvp,
+			  unsigned long r3, unsigned long r4, unsigned long r5,
+			  unsigned long r6, struct pt_regs regs)
 {
 	int error;
 	char *filename;
@@ -354,4 +357,3 @@ unsigned long get_wchan(struct task_struct *p)
 	/* M32R_FIXME */
 	return (0);
 }
-

arch/m32r/kernel/smp.c

@@ -953,7 +953,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num,
 		"ldi	r4, #1			\n\t"
 		"st	r4, @%2			\n\t"
 		: "=&r"(ipicr_val)
-		: "r"(flags), "r"(&ipilock->lock), "r"(ipicr_addr),
+		: "r"(flags), "r"(&ipilock->slock), "r"(ipicr_addr),
 		  "r"(mask), "r"(try), "r"(my_physid_mask)
 		: "memory", "r4"
 #ifdef CONFIG_CHIP_M32700_TS1

arch/m32r/m32700ut/defconfig.m32700ut.smp

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:45 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:50 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -81,6 +83,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 CONFIG_SMP=y
@@ -99,7 +102,6 @@ CONFIG_NR_CPUS=2
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -149,10 +151,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -165,6 +169,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -222,12 +227,12 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -399,6 +404,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -453,7 +459,6 @@ CONFIG_DS1302=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -527,6 +532,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -539,11 +545,25 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -561,6 +581,10 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -631,7 +655,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -700,7 +723,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -714,6 +738,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/m32700ut/defconfig.m32700ut.up

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:49 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:54 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -81,6 +83,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 # CONFIG_SMP is not set
@@ -96,7 +99,6 @@ CONFIG_PREEMPT=y
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -146,10 +148,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -162,6 +166,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -219,12 +224,12 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -396,6 +401,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -450,7 +456,6 @@ CONFIG_DS1302=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -524,6 +529,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -536,11 +542,25 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -558,6 +578,10 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -628,7 +652,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -697,7 +720,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -711,6 +735,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/mappi/defconfig.nommu

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:51 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:10:57 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -34,12 +36,11 @@ CONFIG_EMBEDDED=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_TINY_SHMEM=y
 
 #
 # Loadable module support
@@ -79,6 +80,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 # CONFIG_SMP is not set
@@ -94,7 +96,6 @@ CONFIG_PREEMPT=y
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -144,10 +145,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -160,6 +163,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -329,6 +333,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -380,7 +385,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -429,11 +433,25 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -443,6 +461,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -468,7 +490,6 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
 CONFIG_DEVFS_FS=y
 CONFIG_DEVFS_MOUNT=y
@@ -507,7 +528,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -576,7 +596,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -590,6 +611,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/mappi/defconfig.smp

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:53 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:02 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -84,6 +86,7 @@ CONFIG_IRAM_START=0x00f00000
 CONFIG_IRAM_SIZE=0x00080000
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 CONFIG_SMP=y
@@ -102,7 +105,6 @@ CONFIG_NR_CPUS=2
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -140,6 +142,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
@@ -185,6 +188,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
@@ -211,10 +215,12 @@ CONFIG_MTD_CFI_I2=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -227,6 +233,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -421,6 +428,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -472,7 +480,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -521,11 +528,25 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -535,6 +556,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -593,6 +618,7 @@ CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -615,7 +641,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -684,7 +709,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -698,6 +724,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/mappi/defconfig.up

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:55 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:07 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -83,6 +85,7 @@ CONFIG_IRAM_START=0x00f00000
 CONFIG_IRAM_SIZE=0x00080000
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 # CONFIG_SMP is not set
@@ -98,7 +101,6 @@ CONFIG_PREEMPT=y
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -136,6 +138,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
@@ -181,6 +184,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
@@ -207,10 +211,12 @@ CONFIG_MTD_CFI_I2=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -223,6 +229,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -417,6 +424,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -468,7 +476,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -517,11 +524,25 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -531,6 +552,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -589,6 +614,7 @@ CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -611,7 +637,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -680,7 +705,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -694,6 +720,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/mappi2/defconfig.vdec2

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:08:58 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:10 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -79,6 +81,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 # CONFIG_SMP is not set
@@ -94,7 +97,6 @@ CONFIG_PREEMPT=y
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -142,10 +144,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -158,6 +162,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -215,12 +220,12 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -392,6 +397,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -445,7 +451,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -515,11 +520,25 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -537,6 +556,10 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -607,7 +630,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -676,7 +698,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -690,6 +713,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/oaks32r/defconfig.nommu

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:09:00 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:13 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -33,12 +35,11 @@ CONFIG_EMBEDDED=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_TINY_SHMEM=y
 
 #
 # Loadable module support
@@ -74,6 +75,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PREEMPT=y
 # CONFIG_HAVE_DEC_LOCK is not set
 # CONFIG_SMP is not set
@@ -134,10 +136,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -150,6 +154,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -314,6 +319,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -365,7 +371,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -409,11 +414,25 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -423,6 +442,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -448,7 +471,6 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
 # CONFIG_DEVFS_FS is not set
 CONFIG_DEVPTS_FS_XATTR=y
@@ -485,7 +507,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -554,7 +575,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FRAME_POINTER is not set
 
 #
@@ -568,6 +590,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

arch/m32r/opsput/defconfig.opsput

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1-bk21
-# Fri Nov 12 16:09:02 2004
+# Linux kernel version: 2.6.11-rc4
+# Wed Feb 16 21:11:41 2005
 #
 CONFIG_M32R=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -80,6 +82,7 @@ CONFIG_NOHIGHMEM=y
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_PREEMPT is not set
 # CONFIG_SMP is not set
 
@@ -94,7 +97,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 #
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_OBSOLETE is not set
 CONFIG_PCMCIA=y
 
 #
@@ -144,10 +146,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -160,6 +164,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -194,12 +199,12 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -371,6 +376,7 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -423,7 +429,6 @@ CONFIG_DS1302=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -472,11 +477,25 @@ CONFIG_DS1302=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
 #
 # File systems
 #
@@ -494,6 +513,10 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -564,7 +587,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -633,15 +655,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_IOVIRT is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
 # CONFIG_FRAME_POINTER is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 
 #
 # Security options
@@ -654,6 +680,10 @@ CONFIG_DEBUG_INFO=y
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #

drivers/acpi/dispatcher/dswexec.c

@@ -578,6 +578,13 @@ acpi_ds_exec_end_op (
 				break;
 			}
 
+			/* Done with this result state (Now that operand stack is built) */
+
+			status = acpi_ds_result_stack_pop (walk_state);
+			if (ACPI_FAILURE (status)) {
+				goto cleanup;
+			}
+
 			/*
 			 * If a result object was returned from above, push it on the
 			 * current result stack

drivers/acpi/executer/exoparg6.c

@@ -81,75 +81,119 @@
  * FUNCTION:    acpi_ex_do_match
  *
  * PARAMETERS:  match_op        - The AML match operand
- *              package_value   - Value from the target package
- *              match_value     - Value to be matched
+ *              package_obj     - Object from the target package
+ *              match_obj       - Object to be matched
  *
  * RETURN:      TRUE if the match is successful, FALSE otherwise
  *
- * DESCRIPTION: Implements the low-level match for the ASL Match operator
+ * DESCRIPTION: Implements the low-level match for the ASL Match operator.
+ *              Package elements will be implicitly converted to the type of
+ *              the match object (Integer/Buffer/String).
  *
  ******************************************************************************/
 
 u8
 acpi_ex_do_match (
 	u32                             match_op,
-	acpi_integer                    package_value,
-	acpi_integer                    match_value)
+	union acpi_operand_object       *package_obj,
+	union acpi_operand_object       *match_obj)
 {
+	u8                              logical_result = TRUE;
+	acpi_status                     status;
 
+
+	/*
+	 * Note: Since the package_obj/match_obj ordering is opposite to that of
+	 * the standard logical operators, we have to reverse them when we call
+	 * do_logical_op in order to make the implicit conversion rules work
+	 * correctly. However, this means we have to flip the entire equation
+	 * also. A bit ugly perhaps, but overall, better than fussing the
+	 * parameters around at runtime, over and over again.
+	 *
+	 * Below, P[i] refers to the package element, M refers to the Match object.
+	 */
 	switch (match_op) {
-	case MATCH_MTR:   /* always true */
+	case MATCH_MTR:
 
-		break;
+		/* Always true */
 
+		break;
 
-	case MATCH_MEQ:   /* true if equal   */
+	case MATCH_MEQ:
 
-		if (package_value != match_value) {
+		/*
+		 * True if equal: (P[i] == M)
+		 * Change to:     (M == P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LEQUAL_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
 			return (FALSE);
 		}
 		break;
 
+	case MATCH_MLE:
 
-	case MATCH_MLE:   /* true if less than or equal  */
-
-		if (package_value > match_value) {
+		/*
+		 * True if less than or equal: (P[i] <= M) (P[i] not_greater than M)
+		 * Change to:                  (M >= P[i]) (M not_less than P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
 			return (FALSE);
 		}
+		logical_result = (u8) !logical_result;
 		break;
 
+	case MATCH_MLT:
 
-	case MATCH_MLT:   /* true if less than   */
-
-		if (package_value >= match_value) {
+		/*
+		 * True if less than: (P[i] < M)
+		 * Change to:         (M > P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
 			return (FALSE);
 		}
 		break;
 
+	case MATCH_MGE:
 
-	case MATCH_MGE:   /* true if greater than or equal   */
-
-		if (package_value < match_value) {
+		/*
+		 * True if greater than or equal: (P[i] >= M) (P[i] not_less than M)
+		 * Change to:                     (M <= P[i]) (M not_greater than P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
 			return (FALSE);
 		}
+		logical_result = (u8)!logical_result;
 		break;
 
+	case MATCH_MGT:
 
-	case MATCH_MGT:   /* true if greater than    */
-
-		if (package_value <= match_value) {
+		/*
+		 * True if greater than: (P[i] > M)
+		 * Change to:            (M < P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
 			return (FALSE);
 		}
 		break;
 
+	default:
 
-	default:    /* undefined   */
+		/* Undefined */
 
 		return (FALSE);
 	}
 
-
-	return TRUE;
+	return logical_result;
 }
 
 
@@ -182,19 +226,21 @@ acpi_ex_opcode_6A_0T_1R (
 	switch (walk_state->opcode) {
 	case AML_MATCH_OP:
 		/*
-		 * Match (search_package[0], match_op1[1], match_object1[2],
-		 *                          match_op2[3], match_object2[4], start_index[5])
+		 * Match (search_pkg[0], match_op1[1], match_obj1[2],
+		 *                      match_op2[3], match_obj2[4], start_index[5])
 		 */
 
-		/* Validate match comparison sub-opcodes */
+		/* Validate both Match Term Operators (MTR, MEQ, etc.) */
 
 		if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) ||
 			(operand[3]->integer.value > MAX_MATCH_OPERATOR)) {
-			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "operation encoding out of range\n"));
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Match operator out of range\n"));
 			status = AE_AML_OPERAND_VALUE;
 			goto cleanup;
 		}
 
+		/* Get the package start_index, validate against the package length */
+
 		index = (u32) operand[5]->integer.value;
 		if (index >= (u32) operand[0]->package.count) {
 			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Index beyond package end\n"));
@@ -202,6 +248,8 @@ acpi_ex_opcode_6A_0T_1R (
 			goto cleanup;
 		}
 
+		/* Create an integer for the return value */
+
 		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
 		if (!return_desc) {
 			status = AE_NO_MEMORY;
@@ -214,37 +262,39 @@ acpi_ex_opcode_6A_0T_1R (
 		return_desc->integer.value = ACPI_INTEGER_MAX;
 
 		/*
-		 * Examine each element until a match is found.  Within the loop,
+		 * Examine each element until a match is found. Both match conditions
+		 * must be satisfied for a match to occur. Within the loop,
 		 * "continue" signifies that the current element does not match
 		 * and the next should be examined.
 		 *
 		 * Upon finding a match, the loop will terminate via "break" at
-		 * the bottom.  If it terminates "normally", match_value will be -1
-		 * (its initial value) indicating that no match was found.  When
-		 * returned as a Number, this will produce the Ones value as specified.
+		 * the bottom.  If it terminates "normally", match_value will be
+		 * ACPI_INTEGER_MAX (Ones) (its initial value) indicating that no
+		 * match was found.
 		 */
 		for ( ; index < operand[0]->package.count; index++) {
+			/* Get the current package element */
+
 			this_element = operand[0]->package.elements[index];
 
-			/*
-			 * Treat any NULL or non-numeric elements as non-matching.
-			 */
-			if (!this_element ||
-				ACPI_GET_OBJECT_TYPE (this_element) != ACPI_TYPE_INTEGER) {
+			/* Treat any uninitialized (NULL) elements as non-matching */
+
+			if (!this_element) {
 				continue;
 			}
 
 			/*
-			 * "continue" (proceed to next iteration of enclosing
-			 * "for" loop) signifies a non-match.
+			 * Both match conditions must be satisfied. Execution of a continue
+			 * (proceed to next iteration of enclosing for loop) signifies a
+			 * non-match.
 			 */
 			if (!acpi_ex_do_match ((u32) operand[1]->integer.value,
-					   this_element->integer.value, operand[2]->integer.value)) {
+					   this_element, operand[2])) {
 				continue;
 			}
 
 			if (!acpi_ex_do_match ((u32) operand[3]->integer.value,
-					   this_element->integer.value, operand[4]->integer.value)) {
+					   this_element, operand[4])) {
 				continue;
 			}
 
@@ -253,7 +303,6 @@ acpi_ex_opcode_6A_0T_1R (
 			return_desc->integer.value = index;
 			break;
 		}
-
 		break;
 
 

drivers/acpi/executer/exresop.c

@@ -312,7 +312,7 @@ acpi_ex_resolve_operands (
 			goto next_operand;
 
 
-		case ARGI_ANYTYPE:
+		case ARGI_DATAREFOBJ:  /* Store operator only */
 
 			/*
 			 * We don't want to resolve index_op reference objects during

drivers/acpi/executer/exstoren.c

@@ -206,6 +206,7 @@ acpi_ex_store_object_to_object (
 {
 	union acpi_operand_object       *actual_src_desc;
 	acpi_status                     status = AE_OK;
+	acpi_object_type                original_src_type;
 
 
 	ACPI_FUNCTION_TRACE_PTR ("ex_store_object_to_object", source_desc);
@@ -222,7 +223,8 @@ acpi_ex_store_object_to_object (
 		return_ACPI_STATUS (status);
 	}
 
-	if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_GET_OBJECT_TYPE (dest_desc)) {
+	original_src_type = ACPI_GET_OBJECT_TYPE (source_desc);
+	if (original_src_type != ACPI_GET_OBJECT_TYPE (dest_desc)) {
 		/*
 		 * The source type does not match the type of the destination.
 		 * Perform the "implicit conversion" of the source to the current type
@@ -232,8 +234,8 @@ acpi_ex_store_object_to_object (
 		 * Otherwise, actual_src_desc is a temporary object to hold the
 		 * converted object.
 		 */
-		status = acpi_ex_convert_to_target_type (ACPI_GET_OBJECT_TYPE (dest_desc), source_desc,
-				  &actual_src_desc, walk_state);
+		status = acpi_ex_convert_to_target_type (ACPI_GET_OBJECT_TYPE (dest_desc),
+				  source_desc, &actual_src_desc, walk_state);
 		if (ACPI_FAILURE (status)) {
 			return_ACPI_STATUS (status);
 		}
@@ -269,12 +271,18 @@ acpi_ex_store_object_to_object (
 
 	case ACPI_TYPE_BUFFER:
 
-		status = acpi_ex_store_buffer_to_buffer (actual_src_desc, dest_desc);
+		/*
+		 * Note: There is different store behavior depending on the original
+		 * source type
+		 */
+		status = acpi_ex_store_buffer_to_buffer (original_src_type, actual_src_desc,
+				 dest_desc);
 		break;
 
 	case ACPI_TYPE_PACKAGE:
 
-		status = acpi_ut_copy_iobject_to_iobject (actual_src_desc, &dest_desc, walk_state);
+		status = acpi_ut_copy_iobject_to_iobject (actual_src_desc, &dest_desc,
+				 walk_state);
 		break;
 
 	default:

drivers/acpi/executer/exstorob.c

@@ -66,6 +66,7 @@
 
 acpi_status
 acpi_ex_store_buffer_to_buffer (
+	acpi_object_type                original_src_type,
 	union acpi_operand_object       *source_desc,
 	union acpi_operand_object       *target_desc)
 {
@@ -104,10 +105,17 @@ acpi_ex_store_buffer_to_buffer (
 		ACPI_MEMSET (target_desc->buffer.pointer, 0, target_desc->buffer.length);
 		ACPI_MEMCPY (target_desc->buffer.pointer, buffer, length);
 
+		/*
+		 * If the original source was a string, we must truncate the buffer,
+		 * according to the ACPI spec.  Integer-to-Buffer and Buffer-to-Buffer
+		 * copy must not truncate the original buffer.
+		 */
+		if (original_src_type == ACPI_TYPE_STRING) {
 			/* Set the new length of the target */
 
 			target_desc->buffer.length = length;
 		}
+	}
 	else {
 		/* Truncate the source, copy only what will fit */
 

drivers/acpi/namespace/nsxfname.c

@@ -237,7 +237,7 @@ acpi_get_object_info (
 {
 	acpi_status                     status;
 	struct acpi_namespace_node      *node;
-	struct acpi_device_info         info;
+	struct acpi_device_info         *info;
 	struct acpi_device_info         *return_info;
 	struct acpi_compatible_id_list *cid_list = NULL;
 	acpi_size                       size;
@@ -254,55 +254,59 @@ acpi_get_object_info (
 		return (status);
 	}
 
+	info = ACPI_MEM_CALLOCATE (sizeof (struct acpi_device_info));
+	if (!info) {
+		return (AE_NO_MEMORY);
+	}
+
 	status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE (status)) {
-		return (status);
+		goto cleanup;
 	}
 
 	node = acpi_ns_map_handle_to_node (handle);
 	if (!node) {
 		(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
-		return (AE_BAD_PARAMETER);
+		goto cleanup;
 	}
 
 	/* Init return structure */
 
 	size = sizeof (struct acpi_device_info);
-	ACPI_MEMSET (&info, 0, size);
 
-	info.type  = node->type;
-	info.name  = node->name.integer;
-	info.valid = 0;
+	info->type  = node->type;
+	info->name  = node->name.integer;
+	info->valid = 0;
 
 	status = acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE (status)) {
-		return (status);
+		goto cleanup;
 	}
 
 	/* If not a device, we are all done */
 
-	if (info.type == ACPI_TYPE_DEVICE) {
+	if (info->type == ACPI_TYPE_DEVICE) {
 		/*
 		 * Get extra info for ACPI Devices objects only:
 		 * Run the Device _HID, _UID, _CID, _STA, _ADR and _sx_d methods.
 		 *
 		 * Note: none of these methods are required, so they may or may
-		 * not be present for this device.  The Info.Valid bitfield is used
+		 * not be present for this device.  The Info->Valid bitfield is used
 		 * to indicate which methods were found and ran successfully.
 		 */
 
 		/* Execute the Device._HID method */
 
-		status = acpi_ut_execute_HID (node, &info.hardware_id);
+		status = acpi_ut_execute_HID (node, &info->hardware_id);
 		if (ACPI_SUCCESS (status)) {
-			info.valid |= ACPI_VALID_HID;
+			info->valid |= ACPI_VALID_HID;
 		}
 
 		/* Execute the Device._UID method */
 
-		status = acpi_ut_execute_UID (node, &info.unique_id);
+		status = acpi_ut_execute_UID (node, &info->unique_id);
 		if (ACPI_SUCCESS (status)) {
-			info.valid |= ACPI_VALID_UID;
+			info->valid |= ACPI_VALID_UID;
 		}
 
 		/* Execute the Device._CID method */
@@ -311,32 +315,30 @@ acpi_get_object_info (
 		if (ACPI_SUCCESS (status)) {
 			size += ((acpi_size) cid_list->count - 1) *
 					 sizeof (struct acpi_compatible_id);
-			info.valid |= ACPI_VALID_CID;
+			info->valid |= ACPI_VALID_CID;
 		}
 
 		/* Execute the Device._STA method */
 
-		status = acpi_ut_execute_STA (node, &info.current_status);
+		status = acpi_ut_execute_STA (node, &info->current_status);
 		if (ACPI_SUCCESS (status)) {
-			info.valid |= ACPI_VALID_STA;
+			info->valid |= ACPI_VALID_STA;
 		}
 
 		/* Execute the Device._ADR method */
 
 		status = acpi_ut_evaluate_numeric_object (METHOD_NAME__ADR, node,
-				  &info.address);
+				  &info->address);
 		if (ACPI_SUCCESS (status)) {
-			info.valid |= ACPI_VALID_ADR;
+			info->valid |= ACPI_VALID_ADR;
 		}
 
 		/* Execute the Device._sx_d methods */
 
-		status = acpi_ut_execute_sxds (node, info.highest_dstates);
+		status = acpi_ut_execute_sxds (node, info->highest_dstates);
 		if (ACPI_SUCCESS (status)) {
-			info.valid |= ACPI_VALID_SXDS;
+			info->valid |= ACPI_VALID_SXDS;
 		}
-
-		status = AE_OK;
 	}
 
 	/* Validate/Allocate/Clear caller buffer */
@@ -349,7 +351,7 @@ acpi_get_object_info (
 	/* Populate the return buffer */
 
 	return_info = buffer->pointer;
-	ACPI_MEMCPY (return_info, &info, sizeof (struct acpi_device_info));
+	ACPI_MEMCPY (return_info, info, sizeof (struct acpi_device_info));
 
 	if (cid_list) {
 		ACPI_MEMCPY (&return_info->compatibility_id, cid_list, cid_list->size);
@@ -357,6 +359,7 @@ acpi_get_object_info (
 
 
 cleanup:
+	ACPI_MEM_FREE (info);
 	if (cid_list) {
 		ACPI_MEM_FREE (cid_list);
 	}

drivers/acpi/parser/psopcode.c

@@ -289,7 +289,7 @@
 #define ARGI_LOCAL6                     ARG_NONE
 #define ARGI_LOCAL7                     ARG_NONE
 #define ARGI_LOR_OP                     ARGI_LIST2 (ARGI_INTEGER,    ARGI_INTEGER)
-#define ARGI_MATCH_OP                   ARGI_LIST6 (ARGI_PACKAGE,    ARGI_INTEGER,       ARGI_INTEGER,      ARGI_INTEGER,   ARGI_INTEGER,   ARGI_INTEGER)
+#define ARGI_MATCH_OP                   ARGI_LIST6 (ARGI_PACKAGE,    ARGI_INTEGER,   ARGI_COMPUTEDATA,      ARGI_INTEGER,ARGI_COMPUTEDATA,ARGI_INTEGER)
 #define ARGI_METHOD_OP                  ARGI_INVALID_OPCODE
 #define ARGI_METHODCALL_OP              ARGI_INVALID_OPCODE
 #define ARGI_MID_OP                     ARGI_LIST4 (ARGI_BUFFER_OR_STRING,ARGI_INTEGER,  ARGI_INTEGER,      ARGI_TARGETREF)

drivers/acpi/tables/tbconvrt.c

@@ -269,7 +269,7 @@ acpi_tb_convert_fadt1 (
 		 * that immediately follows.
 		 */
 		ACPI_MEMCPY (&local_fadt->reset_register,
-			&((struct fadt_descriptor_rev2_minus *) original_fadt)->reset_register,
+			&(ACPI_CAST_PTR (struct fadt_descriptor_rev2_minus, original_fadt))->reset_register,
   			sizeof (struct acpi_generic_address) + 1);
 	}
 	else {

drivers/block/ub.c

@@ -300,6 +300,11 @@ struct ub_dev {
 
 /*
  */
+static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
+    struct request *rq);
+static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
+    struct request *rq);
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
 static void ub_end_rq(struct request *rq, int uptodate);
 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -591,40 +596,73 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
  * The request function is our main entry point
  */
 
-static inline int ub_bd_rq_fn_1(request_queue_t *q)
+static void ub_bd_rq_fn(request_queue_t *q)
 {
-#if 0
-	int writing = 0, pci_dir, i, n_elem;
-	u32 tmp;
-	unsigned int msg_size;
-#endif
 	struct ub_dev *sc = q->queuedata;
 	struct request *rq;
-#if 0 /* We use rq->buffer for now */
-	struct scatterlist *sg;
-	int n_elem;
-#endif
+
+	while ((rq = elv_next_request(q)) != NULL) {
+		if (ub_bd_rq_fn_1(sc, rq) != 0) {
+			blk_stop_queue(q);
+			break;
+		}
+	}
+}
+
+static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
+{
 	struct ub_scsi_cmd *cmd;
-	int ub_dir;
-	unsigned int block, nblks;
 	int rc;
 
-	if ((rq = elv_next_request(q)) == NULL)
-		return 1;
-
 	if (atomic_read(&sc->poison) || sc->changed) {
 		blkdev_dequeue_request(rq);
 		ub_end_rq(rq, 0);
 		return 0;
 	}
 
-	if ((cmd = ub_get_cmd(sc)) == NULL) {
-		blk_stop_queue(q);
-		return 1;
-	}
+	if ((cmd = ub_get_cmd(sc)) == NULL)
+		return -1;
+	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
 
 	blkdev_dequeue_request(rq);
 
+	if (blk_pc_request(rq)) {
+		rc = ub_cmd_build_packet(sc, cmd, rq);
+	} else {
+		rc = ub_cmd_build_block(sc, cmd, rq);
+	}
+	if (rc != 0) {
+		ub_put_cmd(sc, cmd);
+		ub_end_rq(rq, 0);
+		blk_start_queue(sc->disk->queue);
+		return 0;
+	}
+
+	cmd->state = UB_CMDST_INIT;
+	cmd->done = ub_rw_cmd_done;
+	cmd->back = rq;
+
+	cmd->tag = sc->tagcnt++;
+	if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
+		ub_put_cmd(sc, cmd);
+		ub_end_rq(rq, 0);
+		blk_start_queue(sc->disk->queue);
+		return 0;
+	}
+
+	return 0;
+}
+
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
+    struct request *rq)
+{
+	int ub_dir;
+#if 0 /* We use rq->buffer for now */
+	struct scatterlist *sg;
+	int n_elem;
+#endif
+	unsigned int block, nblks;
+
 	if (rq_data_dir(rq) == WRITE)
 		ub_dir = UB_DIR_WRITE;
 	else
@@ -652,6 +690,7 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
 		return 0;
 	}
 #endif
+
 	/*
 	 * XXX Unfortunately, this check does not work. It is quite possible
 	 * to get bogus non-null rq->buffer if you allow sg by mistake.
@@ -663,13 +702,12 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
 		 */
 		static int do_print = 1;
 		if (do_print) {
-			printk(KERN_WARNING "%s: unmapped request\n", sc->name);
+			printk(KERN_WARNING "%s: unmapped block request"
+			    " flags 0x%lx sectors %lu\n",
+			    sc->name, rq->flags, rq->nr_sectors);
 			do_print = 0;
 		}
-		ub_put_cmd(sc, cmd);
-		ub_end_rq(rq, 0);
-		blk_start_queue(q);
-		return 0;
+		return -1;
 	}
 
 	/*
@@ -681,7 +719,6 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
 	block = rq->sector >> sc->capacity.bshift;
 	nblks = rq->nr_sectors >> sc->capacity.bshift;
 
-	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
 	cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
 	/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
 	cmd->cdb[2] = block >> 24;
@@ -691,27 +728,44 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
 	cmd->cdb[7] = nblks >> 8;
 	cmd->cdb[8] = nblks;
 	cmd->cdb_len = 10;
+
 	cmd->dir = ub_dir;
-	cmd->state = UB_CMDST_INIT;
 	cmd->data = rq->buffer;
 	cmd->len = rq->nr_sectors * 512;
-	cmd->done = ub_rw_cmd_done;
-	cmd->back = rq;
-
-	cmd->tag = sc->tagcnt++;
-	if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
-		ub_put_cmd(sc, cmd);
-		ub_end_rq(rq, 0);
-		blk_start_queue(q);
-		return 0;
-	}
 
 	return 0;
 }
 
-static void ub_bd_rq_fn(request_queue_t *q)
+static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
+    struct request *rq)
 {
-	do { } while (ub_bd_rq_fn_1(q) == 0);
+
+	if (rq->data_len != 0 && rq->data == NULL) {
+		static int do_print = 1;
+		if (do_print) {
+			printk(KERN_WARNING "%s: unmapped packet request"
+			    " flags 0x%lx length %d\n",
+			    sc->name, rq->flags, rq->data_len);
+			do_print = 0;
+		}
+		return -1;
+	}
+
+	memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
+	cmd->cdb_len = rq->cmd_len;
+
+	if (rq->data_len == 0) {
+		cmd->dir = UB_DIR_NONE;
+	} else {
+		if (rq_data_dir(rq) == WRITE)
+			cmd->dir = UB_DIR_WRITE;
+		else
+			cmd->dir = UB_DIR_READ;
+	}
+	cmd->data = rq->data;
+	cmd->len = rq->data_len;
+
+	return 0;
 }
 
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
@@ -721,6 +775,12 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	request_queue_t *q = disk->queue;
 	int uptodate;
 
+	if (blk_pc_request(rq)) {
+		/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
+		memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
+		rq->sense_len = UB_SENSE_SIZE;
+	}
+
 	if (cmd->error == 0)
 		uptodate = 1;
 	else
@@ -779,6 +839,17 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	bcb = &sc->work_bcb;
 
+	/*
+	 * ``If the allocation length is eighteen or greater, and a device
+	 * server returns less than eithteen bytes of data, the application
+	 * client should assume that the bytes not transferred would have been
+	 * zeroes had the device server returned those bytes.''
+	 *
+	 * We zero sense for all commands so that when a packet request
+	 * fails it does not return a stale sense.
+	 */
+	memset(&sc->top_sense, 0, UB_SENSE_SIZE);
+
 	/* set up the command wrapper */
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->Tag = cmd->tag;		/* Endianness is not important */
@@ -1222,14 +1293,6 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		goto error;
 	}
 
-	/*
-	 * ``If the allocation length is eighteen or greater, and a device
-	 * server returns less than eithteen bytes of data, the application
-	 * client should assume that the bytes not transferred would have been
-	 * zeroes had the device server returned those bytes.''
-	 */
-	memset(&sc->top_sense, 0, UB_SENSE_SIZE);
-
 	scmd = &sc->top_rqs_cmd;
 	scmd->cdb[0] = REQUEST_SENSE;
 	scmd->cdb[4] = UB_SENSE_SIZE;
@@ -1495,30 +1558,10 @@ static int ub_bd_release(struct inode *inode, struct file *filp)
 static int ub_bd_ioctl(struct inode *inode, struct file *filp,
     unsigned int cmd, unsigned long arg)
 {
-// void __user *usermem = (void *) arg;
-// struct carm_port *port = ino->i_bdev->bd_disk->private_data;
-// struct hd_geometry geom;
-
-#if 0
-	switch (cmd) {
-	case HDIO_GETGEO:
-		if (usermem == NULL)		// XXX Bizzare. Why?
-			return -EINVAL;
-
-		geom.heads = (u8) port->dev_geom_head;
-		geom.sectors = (u8) port->dev_geom_sect;
-		geom.cylinders = port->dev_geom_cyl;
-		geom.start = get_start_sect(ino->i_bdev);
-
-		if (copy_to_user(usermem, &geom, sizeof(geom)))
-			return -EFAULT;
-		return 0;
-
-	default: ;
-	}
-#endif
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	void __user *usermem = (void __user *) arg;
 
-	return -ENOTTY;
+	return scsi_cmd_ioctl(filp, disk, cmd, usermem);
 }
 
 /*

drivers/video/sis/sis_main.c

@@ -39,6 +39,7 @@
 #include <linux/moduleparam.h>
 #endif
 #include <linux/kernel.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/string.h>

include/acpi/acconfig.h

@@ -64,7 +64,7 @@
 
 /* Version string */
 
-#define ACPI_CA_VERSION                 0x20050125
+#define ACPI_CA_VERSION                 0x20050211
 
 /*
  * OS name, used for the _OS object.  The _OS object is essentially obsolete,

include/acpi/acinterp.h

@@ -217,8 +217,8 @@ acpi_ex_opcode_6A_0T_1R (
 u8
 acpi_ex_do_match (
 	u32                             match_op,
-	acpi_integer                    package_value,
-	acpi_integer                    match_value);
+	union acpi_operand_object       *package_obj,
+	union acpi_operand_object       *match_obj);
 
 acpi_status
 acpi_ex_get_object_reference (
@@ -617,6 +617,7 @@ acpi_ex_store_object_to_object (
 
 acpi_status
 acpi_ex_store_buffer_to_buffer (
+	acpi_object_type                original_src_type,
 	union acpi_operand_object       *source_desc,
 	union acpi_operand_object       *target_desc);
 

include/acpi/platform/aclinux.h

@@ -81,6 +81,8 @@
 #define ACPI_USE_NATIVE_DIVIDE
 #endif
 
+#define __cdecl
+#define ACPI_FLUSH_CPU_CACHE()
 #endif /* __KERNEL__ */
 
 /* Linux uses GCC */

include/asm-generic/4level-fixup.h

@@ -24,7 +24,7 @@
 #define pud_bad(pud)			0
 #define pud_present(pud)		1
 #define pud_ERROR(pud)			do { } while (0)
-#define pud_clear(pud)			do { } while (0)
+#define pud_clear(pud)			pgd_clear(pud)
 
 #undef pud_free_tlb
 #define pud_free_tlb(tlb, x)            do { } while (0)

include/asm-m32r/spinlock.h

@@ -20,23 +20,13 @@ extern int printk(const char * fmt, ...)
 #define RW_LOCK_BIAS		 0x01000000
 #define RW_LOCK_BIAS_STR	"0x01000000"
 
-/* It seems that people are forgetting to
- * initialize their spinlocks properly, tsk tsk.
- * Remember to turn this off in 2.4. -ben
- */
-#if defined(CONFIG_DEBUG_SPINLOCK)
-#define SPINLOCK_DEBUG	1
-#else
-#define SPINLOCK_DEBUG	0
-#endif
-
 /*
  * Your basic SMP spinlocks, allowing only a single CPU anywhere
  */
 
 typedef struct {
-	volatile int lock;
-#if SPINLOCK_DEBUG
+	volatile int slock;
+#ifdef CONFIG_DEBUG_SPINLOCK
 	unsigned magic;
 #endif
 #ifdef CONFIG_PREEMPT
@@ -46,7 +36,7 @@ typedef struct {
 
 #define SPINLOCK_MAGIC	0xdead4ead
 
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 #define SPINLOCK_MAGIC_INIT	, SPINLOCK_MAGIC
 #else
 #define SPINLOCK_MAGIC_INIT	/* */
@@ -63,7 +53,7 @@ typedef struct {
  * We make no fairness assumptions. They have a cost.
  */
 
-#define spin_is_locked(x)	(*(volatile int *)(&(x)->lock) <= 0)
+#define spin_is_locked(x)	(*(volatile int *)(&(x)->slock) <= 0)
 #define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
 #define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
 
@@ -80,11 +70,11 @@ static inline int _raw_spin_trylock(spinlock_t *lock)
 	unsigned long tmp1, tmp2;
 
 	/*
-	 * lock->lock :  =1 : unlock
+	 * lock->slock :  =1 : unlock
 	 *             : <=0 : lock
 	 * {
-	 *   oldval = lock->lock; <--+ need atomic operation
-	 *   lock->lock = 0;      <--+
+	 *   oldval = lock->slock; <--+ need atomic operation
+	 *   lock->slock = 0;      <--+
 	 * }
 	 */
 	__asm__ __volatile__ (
@@ -97,7 +87,7 @@ static inline int _raw_spin_trylock(spinlock_t *lock)
 		"unlock	%1, @%3;		\n\t"
 		"mvtc	%2, psw;		\n\t"
 		: "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
-		: "r" (&lock->lock)
+		: "r" (&lock->slock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r6"
@@ -111,22 +101,22 @@ static inline void _raw_spin_lock(spinlock_t *lock)
 {
 	unsigned long tmp0, tmp1;
 
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 	__label__ here;
 here:
 	if (lock->magic != SPINLOCK_MAGIC) {
-		printk("eip: %p\n", &&here);
+		printk("pc: %p\n", &&here);
 		BUG();
 	}
 #endif
 	/*
-	 * lock->lock :  =1 : unlock
+	 * lock->slock :  =1 : unlock
 	 *             : <=0 : lock
 	 *
 	 * for ( ; ; ) {
-	 *   lock->lock -= 1;  <-- need atomic operation
-	 *   if (lock->lock == 0) break;
-	 *   for ( ; lock->lock <= 0 ; );
+	 *   lock->slock -= 1;  <-- need atomic operation
+	 *   if (lock->slock == 0) break;
+	 *   for ( ; lock->slock <= 0 ; );
 	 * }
 	 */
 	__asm__ __volatile__ (
@@ -149,7 +139,7 @@ static inline void _raw_spin_lock(spinlock_t *lock)
 		"bra	2b;			\n\t"
 		LOCK_SECTION_END
 		: "=&r" (tmp0), "=&r" (tmp1)
-		: "r" (&lock->lock)
+		: "r" (&lock->slock)
 		: "memory"
 #ifdef CONFIG_CHIP_M32700_TS1
 		, "r6"
@@ -159,12 +149,12 @@ static inline void _raw_spin_lock(spinlock_t *lock)
 
 static inline void _raw_spin_unlock(spinlock_t *lock)
 {
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 	BUG_ON(lock->magic != SPINLOCK_MAGIC);
 	BUG_ON(!spin_is_locked(lock));
 #endif
 	mb();
-	lock->lock = 1;
+	lock->slock = 1;
 }
 
 /*
@@ -179,7 +169,7 @@ static inline void _raw_spin_unlock(spinlock_t *lock)
  */
 typedef struct {
 	volatile int lock;
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 	unsigned magic;
 #endif
 #ifdef CONFIG_PREEMPT
@@ -189,7 +179,7 @@ typedef struct {
 
 #define RWLOCK_MAGIC	0xdeaf1eed
 
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 #define RWLOCK_MAGIC_INIT	, RWLOCK_MAGIC
 #else
 #define RWLOCK_MAGIC_INIT	/* */
@@ -199,6 +189,18 @@ typedef struct {
 
 #define rwlock_init(x)	do { *(x) = RW_LOCK_UNLOCKED; } while(0)
 
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define read_can_lock(x) ((int)(x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
 /*
  * On x86, we implement read-write locks as a 32-bit counter
  * with the high bit (sign) being the "contended" bit.
@@ -214,7 +216,7 @@ static inline void _raw_read_lock(rwlock_t *rw)
 {
 	unsigned long tmp0, tmp1;
 
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 	BUG_ON(rw->magic != RWLOCK_MAGIC);
 #endif
 	/*
@@ -268,7 +270,7 @@ static inline void _raw_write_lock(rwlock_t *rw)
 {
 	unsigned long tmp0, tmp1, tmp2;
 
-#if SPINLOCK_DEBUG
+#ifdef CONFIG_DEBUG_SPINLOCK
 	BUG_ON(rw->magic != RWLOCK_MAGIC);
 #endif
 	/*

mm/memory.c

@@ -98,7 +98,8 @@ static inline void clear_pmd_range(struct mmu_gather *tlb, pmd_t *pmd, unsigned
 		pmd_clear(pmd);
 		return;
 	}
-	if (!(start & ~PMD_MASK) && !(end & ~PMD_MASK)) {
+	if (!((start | end) & ~PMD_MASK)) {
+		/* Only clear full, aligned ranges */
 		page = pmd_page(*pmd);
 		pmd_clear(pmd);
 		dec_page_state(nr_page_table_pages);
@@ -131,7 +132,8 @@ static inline void clear_pud_range(struct mmu_gather *tlb, pud_t *pud, unsigned
 		addr = next;
 	} while (addr && (addr < end));
 
-	if (!(start & ~PUD_MASK) && !(end & ~PUD_MASK)) {
+	if (!((start | end) & ~PUD_MASK)) {
+		/* Only clear full, aligned ranges */
 		pud_clear(pud);
 		pmd_free_tlb(tlb, __pmd);
 	}
@@ -162,7 +164,8 @@ static inline void clear_pgd_range(struct mmu_gather *tlb, pgd_t *pgd, unsigned
 		addr = next;
 	} while (addr && (addr < end));
 
-	if (!(start & ~PGDIR_MASK) && !(end & ~PGDIR_MASK)) {
+	if (!((start | end) & ~PGDIR_MASK)) {
+		/* Only clear full, aligned ranges */
 		pgd_clear(pgd);
 		pud_free_tlb(tlb, __pud);
 	}
@@ -358,7 +361,7 @@ static int copy_pmd_range(struct mm_struct *dst_mm,  struct mm_struct *src_mm,
 
 	for (; addr < end; addr = next, src_pmd++, dst_pmd++) {
 		next = (addr + PMD_SIZE) & PMD_MASK;
-		if (next > end)
+		if (next > end || next <= addr)
 			next = end;
 		if (pmd_none(*src_pmd))
 			continue;
@@ -390,7 +393,7 @@ static int copy_pud_range(struct mm_struct *dst_mm,  struct mm_struct *src_mm,
 
 	for (; addr < end; addr = next, src_pud++, dst_pud++) {
 		next = (addr + PUD_SIZE) & PUD_MASK;
-		if (next > end)
+		if (next > end || next <= addr)
 			next = end;
 		if (pud_none(*src_pud))
 			continue;
@@ -1041,7 +1044,8 @@ static inline int zeromap_pud_range(struct mm_struct *mm, pud_t * pud,
 		error = -ENOMEM;
 		if (!pmd)
 			break;
-		error = zeromap_pmd_range(mm, pmd, address, end - address, prot);
+		error = zeromap_pmd_range(mm, pmd, base + address,
+					  end - address, prot);
 		if (error)
 			break;
 		address = (address + PUD_SIZE) & PUD_MASK;