Skip to content

L
linux
Commit 3160222e authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge pobox.com:/garz/repo/linux-2.6 

into pobox.com:/garz/repo/libata-2.6
parents e6d5599d 28ad2df3
Show whitespace changes
Inline Side-by-side
Showing with 659 additions and 277 deletions
arch/m32r/defconfig
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:49 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:10:44 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -81,6 +83,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
# CONFIG_SMP is not set
......@@ -96,7 +99,6 @@ CONFIG_PREEMPT=y
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -146,10 +148,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -162,6 +166,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -219,12 +224,12 @@ CONFIG_SCSI_MULTI_LUN=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -396,6 +401,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -450,7 +456,6 @@ CONFIG_DS1302=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -524,6 +529,7 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -536,11 +542,25 @@ CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -558,6 +578,10 @@ CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -628,7 +652,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -697,7 +720,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -711,6 +735,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/kernel/process.c
View file @ 3160222e
/*
* linux/arch/m32r/kernel/process.c
* orig : sh
*
* Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata,
* Hitoshi Yamamoto
......@@ -290,13 +289,16 @@ asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
}
asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
unsigned long r2, unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, struct pt_regs regs)
unsigned long parent_tidptr,
unsigned long child_tidptr,
unsigned long r4, unsigned long r5, unsigned long r6,
struct pt_regs regs)
{
if (!newsp)
newsp = regs.spu;
return do_fork(clone_flags, newsp, &regs, 0, NULL, NULL);
return do_fork(clone_flags, newsp, &regs, 0,
(int __user *)parent_tidptr, (int __user *)child_tidptr);
}
/*
......@@ -320,9 +322,10 @@ asmlinkage int sys_vfork(unsigned long r0, unsigned long r1, unsigned long r2,
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv, char __user * __user *uenvp,
unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
struct pt_regs regs)
asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
char __user * __user *uenvp,
unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, struct pt_regs regs)
{
int error;
char *filename;
......@@ -354,4 +357,3 @@ unsigned long get_wchan(struct task_struct *p)
/* M32R_FIXME */
return (0);
}
arch/m32r/kernel/smp.c
View file @ 3160222e
......@@ -953,7 +953,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num,
"ldi r4, #1 \n\t"
"st r4, @%2 \n\t"
: "=&r"(ipicr_val)
: "r"(flags), "r"(&ipilock->lock), "r"(ipicr_addr),
: "r"(flags), "r"(&ipilock->slock), "r"(ipicr_addr),
"r"(mask), "r"(try), "r"(my_physid_mask)
: "memory", "r4"
#ifdef CONFIG_CHIP_M32700_TS1
......
arch/m32r/m32700ut/defconfig.m32700ut.smp
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:45 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:10:50 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -81,6 +83,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
CONFIG_SMP=y
......@@ -99,7 +102,6 @@ CONFIG_NR_CPUS=2
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -149,10 +151,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -165,6 +169,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -222,12 +227,12 @@ CONFIG_SCSI_MULTI_LUN=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -399,6 +404,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -453,7 +459,6 @@ CONFIG_DS1302=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -527,6 +532,7 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -539,11 +545,25 @@ CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -561,6 +581,10 @@ CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -631,7 +655,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -700,7 +723,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -714,6 +738,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/m32700ut/defconfig.m32700ut.up
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:49 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:10:54 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -81,6 +83,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
# CONFIG_SMP is not set
......@@ -96,7 +99,6 @@ CONFIG_PREEMPT=y
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -146,10 +148,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -162,6 +166,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -219,12 +224,12 @@ CONFIG_SCSI_MULTI_LUN=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -396,6 +401,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -450,7 +456,6 @@ CONFIG_DS1302=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -524,6 +529,7 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -536,11 +542,25 @@ CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -558,6 +578,10 @@ CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -628,7 +652,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -697,7 +720,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -711,6 +735,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/mappi/defconfig.nommu
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:51 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:10:57 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -34,12 +36,11 @@ CONFIG_EMBEDDED=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_TINY_SHMEM=y
#
# Loadable module support
......@@ -79,6 +80,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
# CONFIG_SMP is not set
......@@ -94,7 +96,6 @@ CONFIG_PREEMPT=y
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -144,10 +145,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -160,6 +163,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -329,6 +333,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -380,7 +385,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -429,11 +433,25 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -443,6 +461,10 @@ CONFIG_EXT2_FS=y
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -468,7 +490,6 @@ CONFIG_DNOTIFY=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
......@@ -507,7 +528,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -576,7 +596,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -590,6 +611,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/mappi/defconfig.smp
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:53 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:11:02 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -84,6 +86,7 @@ CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
CONFIG_SMP=y
......@@ -102,7 +105,6 @@ CONFIG_NR_CPUS=2
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -140,6 +142,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
......@@ -185,6 +188,7 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
......@@ -211,10 +215,12 @@ CONFIG_MTD_CFI_I2=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
......@@ -227,6 +233,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -421,6 +428,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -472,7 +480,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -521,11 +528,25 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -535,6 +556,10 @@ CONFIG_EXT2_FS=y
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
......@@ -593,6 +618,7 @@ CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_FS_NOR_ECC is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -615,7 +641,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -684,7 +709,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -698,6 +724,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/mappi/defconfig.up
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:55 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:11:07 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -83,6 +85,7 @@ CONFIG_IRAM_START=0x00f00000
CONFIG_IRAM_SIZE=0x00080000
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
# CONFIG_SMP is not set
......@@ -98,7 +101,6 @@ CONFIG_PREEMPT=y
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -136,6 +138,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
......@@ -181,6 +184,7 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
......@@ -207,10 +211,12 @@ CONFIG_MTD_CFI_I2=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
......@@ -223,6 +229,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -417,6 +424,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -468,7 +476,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -517,11 +524,25 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -531,6 +552,10 @@ CONFIG_EXT2_FS=y
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
......@@ -589,6 +614,7 @@ CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_FS_NOR_ECC is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -611,7 +637,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -680,7 +705,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -694,6 +720,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/mappi2/defconfig.vdec2
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:08:58 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:11:10 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -79,6 +81,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
# CONFIG_SMP is not set
......@@ -94,7 +97,6 @@ CONFIG_PREEMPT=y
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -142,10 +144,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -158,6 +162,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -215,12 +220,12 @@ CONFIG_SCSI_MULTI_LUN=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -392,6 +397,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -445,7 +451,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -515,11 +520,25 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -537,6 +556,10 @@ CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -607,7 +630,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -676,7 +698,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -690,6 +713,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/oaks32r/defconfig.nommu
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:09:00 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:11:13 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -33,12 +35,11 @@ CONFIG_EMBEDDED=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_TINY_SHMEM=y
#
# Loadable module support
......@@ -74,6 +75,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PREEMPT=y
# CONFIG_HAVE_DEC_LOCK is not set
# CONFIG_SMP is not set
......@@ -134,10 +136,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -150,6 +154,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -314,6 +319,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -365,7 +371,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
......@@ -409,11 +414,25 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -423,6 +442,10 @@ CONFIG_EXT2_FS=y
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -448,7 +471,6 @@ CONFIG_DNOTIFY=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
......@@ -485,7 +507,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -554,7 +575,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FRAME_POINTER is not set
#
......@@ -568,6 +590,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/m32r/opsput/defconfig.opsput
View file @ 3160222e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-bk21
# Fri Nov 12 16:09:02 2004
# Linux kernel version: 2.6.11-rc4
# Wed Feb 16 21:11:41 2005
#
CONFIG_M32R=y
CONFIG_UID16=y
# CONFIG_UID16 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
......@@ -80,6 +82,7 @@ CONFIG_NOHIGHMEM=y
# CONFIG_DISCONTIGMEM is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_PREEMPT is not set
# CONFIG_SMP is not set
......@@ -94,7 +97,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=y
#
......@@ -144,10 +146,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
......@@ -160,6 +164,7 @@ CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -194,12 +199,12 @@ CONFIG_SCSI_MULTI_LUN=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -371,6 +376,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
#
......@@ -423,7 +429,6 @@ CONFIG_DS1302=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -472,11 +477,25 @@ CONFIG_DS1302=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -494,6 +513,10 @@ CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -564,7 +587,6 @@ CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
......@@ -633,15 +655,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
......@@ -654,6 +680,10 @@ CONFIG_DEBUG_INFO=y
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
drivers/acpi/dispatcher/dswexec.c
View file @ 3160222e
......@@ -578,6 +578,13 @@ acpi_ds_exec_end_op (
break;
}
/* Done with this result state (Now that operand stack is built) */
status = acpi_ds_result_stack_pop (walk_state);
if (ACPI_FAILURE (status)) {
goto cleanup;
}
/*
* If a result object was returned from above, push it on the
* current result stack
......
drivers/acpi/executer/exoparg6.c
View file @ 3160222e
......@@ -81,75 +81,119 @@
* FUNCTION: acpi_ex_do_match
*
* PARAMETERS: match_op - The AML match operand
* package_value - Value from the target package
* match_value - Value to be matched
* package_obj - Object from the target package
* match_obj - Object to be matched
*
* RETURN: TRUE if the match is successful, FALSE otherwise
*
* DESCRIPTION: Implements the low-level match for the ASL Match operator
* DESCRIPTION: Implements the low-level match for the ASL Match operator.
* Package elements will be implicitly converted to the type of
* the match object (Integer/Buffer/String).
*
******************************************************************************/
u8
acpi_ex_do_match (
u32 match_op,
acpi_integer package_value,
acpi_integer match_value)
union acpi_operand_object *package_obj,
union acpi_operand_object *match_obj)
{
u8 logical_result = TRUE;
acpi_status status;
/*
* Note: Since the package_obj/match_obj ordering is opposite to that of
* the standard logical operators, we have to reverse them when we call
* do_logical_op in order to make the implicit conversion rules work
* correctly. However, this means we have to flip the entire equation
* also. A bit ugly perhaps, but overall, better than fussing the
* parameters around at runtime, over and over again.
*
* Below, P[i] refers to the package element, M refers to the Match object.
*/
switch (match_op) {
case MATCH_MTR: /* always true */
case MATCH_MTR:
break;
/* Always true */
break;
case MATCH_MEQ: /* true if equal */
case MATCH_MEQ:
if (package_value != match_value) {
/*
* True if equal: (P[i] == M)
* Change to: (M == P[i])
*/
status = acpi_ex_do_logical_op (AML_LEQUAL_OP, match_obj, package_obj,
&logical_result);
if (ACPI_FAILURE (status)) {
return (FALSE);
}
break;
case MATCH_MLE:
case MATCH_MLE: /* true if less than or equal */
if (package_value > match_value) {
/*
* True if less than or equal: (P[i] <= M) (P[i] not_greater than M)
* Change to: (M >= P[i]) (M not_less than P[i])
*/
status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
&logical_result);
if (ACPI_FAILURE (status)) {
return (FALSE);
}
logical_result = (u8) !logical_result;
break;
case MATCH_MLT:
case MATCH_MLT: /* true if less than */
if (package_value >= match_value) {
/*
* True if less than: (P[i] < M)
* Change to: (M > P[i])
*/
status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
&logical_result);
if (ACPI_FAILURE (status)) {
return (FALSE);
}
break;
case MATCH_MGE:
case MATCH_MGE: /* true if greater than or equal */
if (package_value < match_value) {
/*
* True if greater than or equal: (P[i] >= M) (P[i] not_less than M)
* Change to: (M <= P[i]) (M not_greater than P[i])
*/
status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
&logical_result);
if (ACPI_FAILURE (status)) {
return (FALSE);
}
logical_result = (u8)!logical_result;
break;
case MATCH_MGT:
case MATCH_MGT: /* true if greater than */
if (package_value <= match_value) {
/*
* True if greater than: (P[i] > M)
* Change to: (M < P[i])
*/
status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
&logical_result);
if (ACPI_FAILURE (status)) {
return (FALSE);
}
break;
default:
default: /* undefined */
/* Undefined */
return (FALSE);
}
return TRUE;
return logical_result;
}
......@@ -182,19 +226,21 @@ acpi_ex_opcode_6A_0T_1R (
switch (walk_state->opcode) {
case AML_MATCH_OP:
/*
* Match (search_package[0], match_op1[1], match_object1[2],
* match_op2[3], match_object2[4], start_index[5])
* Match (search_pkg[0], match_op1[1], match_obj1[2],
* match_op2[3], match_obj2[4], start_index[5])
*/
/* Validate match comparison sub-opcodes */
/* Validate both Match Term Operators (MTR, MEQ, etc.) */
if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) ||
(operand[3]->integer.value > MAX_MATCH_OPERATOR)) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "operation encoding out of range\n"));
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Match operator out of range\n"));
status = AE_AML_OPERAND_VALUE;
goto cleanup;
}
/* Get the package start_index, validate against the package length */
index = (u32) operand[5]->integer.value;
if (index >= (u32) operand[0]->package.count) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Index beyond package end\n"));
......@@ -202,6 +248,8 @@ acpi_ex_opcode_6A_0T_1R (
goto cleanup;
}
/* Create an integer for the return value */
return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
......@@ -214,37 +262,39 @@ acpi_ex_opcode_6A_0T_1R (
return_desc->integer.value = ACPI_INTEGER_MAX;
/*
* Examine each element until a match is found. Within the loop,
* Examine each element until a match is found. Both match conditions
* must be satisfied for a match to occur. Within the loop,
* "continue" signifies that the current element does not match
* and the next should be examined.
*
* Upon finding a match, the loop will terminate via "break" at
* the bottom. If it terminates "normally", match_value will be -1
* (its initial value) indicating that no match was found. When
* returned as a Number, this will produce the Ones value as specified.
* the bottom. If it terminates "normally", match_value will be
* ACPI_INTEGER_MAX (Ones) (its initial value) indicating that no
* match was found.
*/
for ( ; index < operand[0]->package.count; index++) {
/* Get the current package element */
this_element = operand[0]->package.elements[index];
/*
* Treat any NULL or non-numeric elements as non-matching.
*/
if (!this_element ||
ACPI_GET_OBJECT_TYPE (this_element) != ACPI_TYPE_INTEGER) {
/* Treat any uninitialized (NULL) elements as non-matching */
if (!this_element) {
continue;
}
/*
* "continue" (proceed to next iteration of enclosing
* "for" loop) signifies a non-match.
* Both match conditions must be satisfied. Execution of a continue
* (proceed to next iteration of enclosing for loop) signifies a
* non-match.
*/
if (!acpi_ex_do_match ((u32) operand[1]->integer.value,
this_element->integer.value, operand[2]->integer.value)) {
this_element, operand[2])) {
continue;
}
if (!acpi_ex_do_match ((u32) operand[3]->integer.value,
this_element->integer.value, operand[4]->integer.value)) {
this_element, operand[4])) {
continue;
}
......@@ -253,7 +303,6 @@ acpi_ex_opcode_6A_0T_1R (
return_desc->integer.value = index;
break;
}
break;
......
drivers/acpi/executer/exresop.c
View file @ 3160222e
......@@ -312,7 +312,7 @@ acpi_ex_resolve_operands (
goto next_operand;
case ARGI_ANYTYPE:
case ARGI_DATAREFOBJ: /* Store operator only */
/*
* We don't want to resolve index_op reference objects during
......
drivers/acpi/executer/exstoren.c
View file @ 3160222e
......@@ -206,6 +206,7 @@ acpi_ex_store_object_to_object (
{
union acpi_operand_object *actual_src_desc;
acpi_status status = AE_OK;
acpi_object_type original_src_type;
ACPI_FUNCTION_TRACE_PTR ("ex_store_object_to_object", source_desc);
......@@ -222,7 +223,8 @@ acpi_ex_store_object_to_object (
return_ACPI_STATUS (status);
}
if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_GET_OBJECT_TYPE (dest_desc)) {
original_src_type = ACPI_GET_OBJECT_TYPE (source_desc);
if (original_src_type != ACPI_GET_OBJECT_TYPE (dest_desc)) {
/*
* The source type does not match the type of the destination.
* Perform the "implicit conversion" of the source to the current type
......@@ -232,8 +234,8 @@ acpi_ex_store_object_to_object (
* Otherwise, actual_src_desc is a temporary object to hold the
* converted object.
*/
status = acpi_ex_convert_to_target_type (ACPI_GET_OBJECT_TYPE (dest_desc), source_desc,
&actual_src_desc, walk_state);
status = acpi_ex_convert_to_target_type (ACPI_GET_OBJECT_TYPE (dest_desc),
source_desc, &actual_src_desc, walk_state);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
......@@ -269,12 +271,18 @@ acpi_ex_store_object_to_object (
case ACPI_TYPE_BUFFER:
status = acpi_ex_store_buffer_to_buffer (actual_src_desc, dest_desc);
/*
* Note: There is different store behavior depending on the original
* source type
*/
status = acpi_ex_store_buffer_to_buffer (original_src_type, actual_src_desc,
dest_desc);
break;
case ACPI_TYPE_PACKAGE:
status = acpi_ut_copy_iobject_to_iobject (actual_src_desc, &dest_desc, walk_state);
status = acpi_ut_copy_iobject_to_iobject (actual_src_desc, &dest_desc,
walk_state);
break;
default:
......
drivers/acpi/executer/exstorob.c
View file @ 3160222e
......@@ -66,6 +66,7 @@
acpi_status
acpi_ex_store_buffer_to_buffer (
acpi_object_type original_src_type,
union acpi_operand_object *source_desc,
union acpi_operand_object *target_desc)
{
......@@ -104,10 +105,17 @@ acpi_ex_store_buffer_to_buffer (
ACPI_MEMSET (target_desc->buffer.pointer, 0, target_desc->buffer.length);
ACPI_MEMCPY (target_desc->buffer.pointer, buffer, length);
/*
* If the original source was a string, we must truncate the buffer,
* according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
* copy must not truncate the original buffer.
*/
if (original_src_type == ACPI_TYPE_STRING) {
/* Set the new length of the target */
target_desc->buffer.length = length;
}
}
else {
/* Truncate the source, copy only what will fit */
......
drivers/acpi/namespace/nsxfname.c
View file @ 3160222e
......@@ -237,7 +237,7 @@ acpi_get_object_info (
{
acpi_status status;
struct acpi_namespace_node *node;
struct acpi_device_info info;
struct acpi_device_info *info;
struct acpi_device_info *return_info;
struct acpi_compatible_id_list *cid_list = NULL;
acpi_size size;
......@@ -254,55 +254,59 @@ acpi_get_object_info (
return (status);
}
info = ACPI_MEM_CALLOCATE (sizeof (struct acpi_device_info));
if (!info) {
return (AE_NO_MEMORY);
}
status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE (status)) {
return (status);
goto cleanup;
}
node = acpi_ns_map_handle_to_node (handle);
if (!node) {
(void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
return (AE_BAD_PARAMETER);
goto cleanup;
}
/* Init return structure */
size = sizeof (struct acpi_device_info);
ACPI_MEMSET (&info, 0, size);
info.type = node->type;
info.name = node->name.integer;
info.valid = 0;
info->type = node->type;
info->name = node->name.integer;
info->valid = 0;
status = acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE (status)) {
return (status);
goto cleanup;
}
/* If not a device, we are all done */
if (info.type == ACPI_TYPE_DEVICE) {
if (info->type == ACPI_TYPE_DEVICE) {
/*
* Get extra info for ACPI Devices objects only:
* Run the Device _HID, _UID, _CID, _STA, _ADR and _sx_d methods.
*
* Note: none of these methods are required, so they may or may
* not be present for this device. The Info.Valid bitfield is used
* not be present for this device. The Info->Valid bitfield is used
* to indicate which methods were found and ran successfully.
*/
/* Execute the Device._HID method */
status = acpi_ut_execute_HID (node, &info.hardware_id);
status = acpi_ut_execute_HID (node, &info->hardware_id);
if (ACPI_SUCCESS (status)) {
info.valid |= ACPI_VALID_HID;
info->valid |= ACPI_VALID_HID;
}
/* Execute the Device._UID method */
status = acpi_ut_execute_UID (node, &info.unique_id);
status = acpi_ut_execute_UID (node, &info->unique_id);
if (ACPI_SUCCESS (status)) {
info.valid |= ACPI_VALID_UID;
info->valid |= ACPI_VALID_UID;
}
/* Execute the Device._CID method */
......@@ -311,32 +315,30 @@ acpi_get_object_info (
if (ACPI_SUCCESS (status)) {
size += ((acpi_size) cid_list->count - 1) *
sizeof (struct acpi_compatible_id);
info.valid |= ACPI_VALID_CID;
info->valid |= ACPI_VALID_CID;
}
/* Execute the Device._STA method */
status = acpi_ut_execute_STA (node, &info.current_status);
status = acpi_ut_execute_STA (node, &info->current_status);
if (ACPI_SUCCESS (status)) {
info.valid |= ACPI_VALID_STA;
info->valid |= ACPI_VALID_STA;
}
/* Execute the Device._ADR method */
status = acpi_ut_evaluate_numeric_object (METHOD_NAME__ADR, node,
&info.address);
&info->address);
if (ACPI_SUCCESS (status)) {
info.valid |= ACPI_VALID_ADR;
info->valid |= ACPI_VALID_ADR;
}
/* Execute the Device._sx_d methods */
status = acpi_ut_execute_sxds (node, info.highest_dstates);
status = acpi_ut_execute_sxds (node, info->highest_dstates);
if (ACPI_SUCCESS (status)) {
info.valid |= ACPI_VALID_SXDS;
info->valid |= ACPI_VALID_SXDS;
}
status = AE_OK;
}
/* Validate/Allocate/Clear caller buffer */
......@@ -349,7 +351,7 @@ acpi_get_object_info (
/* Populate the return buffer */
return_info = buffer->pointer;
ACPI_MEMCPY (return_info, &info, sizeof (struct acpi_device_info));
ACPI_MEMCPY (return_info, info, sizeof (struct acpi_device_info));
if (cid_list) {
ACPI_MEMCPY (&return_info->compatibility_id, cid_list, cid_list->size);
......@@ -357,6 +359,7 @@ acpi_get_object_info (
cleanup:
ACPI_MEM_FREE (info);
if (cid_list) {
ACPI_MEM_FREE (cid_list);
}
......
drivers/acpi/parser/psopcode.c
View file @ 3160222e
......@@ -289,7 +289,7 @@
#define ARGI_LOCAL6 ARG_NONE
#define ARGI_LOCAL7 ARG_NONE
#define ARGI_LOR_OP ARGI_LIST2 (ARGI_INTEGER, ARGI_INTEGER)
#define ARGI_MATCH_OP ARGI_LIST6 (ARGI_PACKAGE, ARGI_INTEGER, ARGI_INTEGER, ARGI_INTEGER, ARGI_INTEGER, ARGI_INTEGER)
#define ARGI_MATCH_OP ARGI_LIST6 (ARGI_PACKAGE, ARGI_INTEGER, ARGI_COMPUTEDATA, ARGI_INTEGER,ARGI_COMPUTEDATA,ARGI_INTEGER)
#define ARGI_METHOD_OP ARGI_INVALID_OPCODE
#define ARGI_METHODCALL_OP ARGI_INVALID_OPCODE
#define ARGI_MID_OP ARGI_LIST4 (ARGI_BUFFER_OR_STRING,ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF)
......
drivers/acpi/tables/tbconvrt.c
View file @ 3160222e
......@@ -269,7 +269,7 @@ acpi_tb_convert_fadt1 (
* that immediately follows.
*/
ACPI_MEMCPY (&local_fadt->reset_register,
&((struct fadt_descriptor_rev2_minus *) original_fadt)->reset_register,
&(ACPI_CAST_PTR (struct fadt_descriptor_rev2_minus, original_fadt))->reset_register,
sizeof (struct acpi_generic_address) + 1);
}
else {
......
drivers/block/ub.c
View file @ 3160222e
......@@ -300,6 +300,11 @@ struct ub_dev {
/*
*/
static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq);
static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
static void ub_end_rq(struct request *rq, int uptodate);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
......@@ -591,40 +596,73 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
* The request function is our main entry point
*/
static inline int ub_bd_rq_fn_1(request_queue_t *q)
static void ub_bd_rq_fn(request_queue_t *q)
{
#if 0
int writing = 0, pci_dir, i, n_elem;
u32 tmp;
unsigned int msg_size;
#endif
struct ub_dev *sc = q->queuedata;
struct request *rq;
#if 0 /* We use rq->buffer for now */
struct scatterlist *sg;
int n_elem;
#endif
while ((rq = elv_next_request(q)) != NULL) {
if (ub_bd_rq_fn_1(sc, rq) != 0) {
blk_stop_queue(q);
break;
}
}
}
static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
{
struct ub_scsi_cmd *cmd;
int ub_dir;
unsigned int block, nblks;
int rc;
if ((rq = elv_next_request(q)) == NULL)
return 1;
if (atomic_read(&sc->poison) || sc->changed) {
blkdev_dequeue_request(rq);
ub_end_rq(rq, 0);
return 0;
}
if ((cmd = ub_get_cmd(sc)) == NULL) {
blk_stop_queue(q);
return 1;
}
if ((cmd = ub_get_cmd(sc)) == NULL)
return -1;
memset(cmd, 0, sizeof(struct ub_scsi_cmd));
blkdev_dequeue_request(rq);
if (blk_pc_request(rq)) {
rc = ub_cmd_build_packet(sc, cmd, rq);
} else {
rc = ub_cmd_build_block(sc, cmd, rq);
}
if (rc != 0) {
ub_put_cmd(sc, cmd);
ub_end_rq(rq, 0);
blk_start_queue(sc->disk->queue);
return 0;
}
cmd->state = UB_CMDST_INIT;
cmd->done = ub_rw_cmd_done;
cmd->back = rq;
cmd->tag = sc->tagcnt++;
if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
ub_put_cmd(sc, cmd);
ub_end_rq(rq, 0);
blk_start_queue(sc->disk->queue);
return 0;
}
return 0;
}
static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq)
{
int ub_dir;
#if 0 /* We use rq->buffer for now */
struct scatterlist *sg;
int n_elem;
#endif
unsigned int block, nblks;
if (rq_data_dir(rq) == WRITE)
ub_dir = UB_DIR_WRITE;
else
......@@ -652,6 +690,7 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
return 0;
}
#endif
/*
* XXX Unfortunately, this check does not work. It is quite possible
* to get bogus non-null rq->buffer if you allow sg by mistake.
......@@ -663,13 +702,12 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
*/
static int do_print = 1;
if (do_print) {
printk(KERN_WARNING "%s: unmapped request\n", sc->name);
printk(KERN_WARNING "%s: unmapped block request"
" flags 0x%lx sectors %lu\n",
sc->name, rq->flags, rq->nr_sectors);
do_print = 0;
}
ub_put_cmd(sc, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0;
return -1;
}
/*
......@@ -681,7 +719,6 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
block = rq->sector >> sc->capacity.bshift;
nblks = rq->nr_sectors >> sc->capacity.bshift;
memset(cmd, 0, sizeof(struct ub_scsi_cmd));
cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
cmd->cdb[2] = block >> 24;
......@@ -691,27 +728,44 @@ static inline int ub_bd_rq_fn_1(request_queue_t *q)
cmd->cdb[7] = nblks >> 8;
cmd->cdb[8] = nblks;
cmd->cdb_len = 10;
cmd->dir = ub_dir;
cmd->state = UB_CMDST_INIT;
cmd->data = rq->buffer;
cmd->len = rq->nr_sectors * 512;
cmd->done = ub_rw_cmd_done;
cmd->back = rq;
cmd->tag = sc->tagcnt++;
if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
ub_put_cmd(sc, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0;
}
return 0;
}
static void ub_bd_rq_fn(request_queue_t *q)
static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq)
{
do { } while (ub_bd_rq_fn_1(q) == 0);
if (rq->data_len != 0 && rq->data == NULL) {
static int do_print = 1;
if (do_print) {
printk(KERN_WARNING "%s: unmapped packet request"
" flags 0x%lx length %d\n",
sc->name, rq->flags, rq->data_len);
do_print = 0;
}
return -1;
}
memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
cmd->cdb_len = rq->cmd_len;
if (rq->data_len == 0) {
cmd->dir = UB_DIR_NONE;
} else {
if (rq_data_dir(rq) == WRITE)
cmd->dir = UB_DIR_WRITE;
else
cmd->dir = UB_DIR_READ;
}
cmd->data = rq->data;
cmd->len = rq->data_len;
return 0;
}
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
......@@ -721,6 +775,12 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
request_queue_t *q = disk->queue;
int uptodate;
if (blk_pc_request(rq)) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
rq->sense_len = UB_SENSE_SIZE;
}
if (cmd->error == 0)
uptodate = 1;
else
......@@ -779,6 +839,17 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
bcb = &sc->work_bcb;
/*
* ``If the allocation length is eighteen or greater, and a device
* server returns less than eithteen bytes of data, the application
* client should assume that the bytes not transferred would have been
* zeroes had the device server returned those bytes.''
*
* We zero sense for all commands so that when a packet request
* fails it does not return a stale sense.
*/
memset(&sc->top_sense, 0, UB_SENSE_SIZE);
/* set up the command wrapper */
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->Tag = cmd->tag; /* Endianness is not important */
......@@ -1222,14 +1293,6 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
goto error;
}
/*
* ``If the allocation length is eighteen or greater, and a device
* server returns less than eithteen bytes of data, the application
* client should assume that the bytes not transferred would have been
* zeroes had the device server returned those bytes.''
*/
memset(&sc->top_sense, 0, UB_SENSE_SIZE);
scmd = &sc->top_rqs_cmd;
scmd->cdb[0] = REQUEST_SENSE;
scmd->cdb[4] = UB_SENSE_SIZE;
......@@ -1495,30 +1558,10 @@ static int ub_bd_release(struct inode *inode, struct file *filp)
static int ub_bd_ioctl(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg)
{
// void __user *usermem = (void *) arg;
// struct carm_port *port = ino->i_bdev->bd_disk->private_data;
// struct hd_geometry geom;
#if 0
switch (cmd) {
case HDIO_GETGEO:
if (usermem == NULL) // XXX Bizzare. Why?
return -EINVAL;
geom.heads = (u8) port->dev_geom_head;
geom.sectors = (u8) port->dev_geom_sect;
geom.cylinders = port->dev_geom_cyl;
geom.start = get_start_sect(ino->i_bdev);
if (copy_to_user(usermem, &geom, sizeof(geom)))
return -EFAULT;
return 0;
default: ;
}
#endif
struct gendisk *disk = inode->i_bdev->bd_disk;
void __user *usermem = (void __user *) arg;
return -ENOTTY;
return scsi_cmd_ioctl(filp, disk, cmd, usermem);
}
/*
......
drivers/video/sis/sis_main.c
View file @ 3160222e
......@@ -39,6 +39,7 @@
#include <linux/moduleparam.h>
#endif
#include <linux/kernel.h>
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/string.h>
......
include/acpi/acconfig.h
View file @ 3160222e
......@@ -64,7 +64,7 @@
/* Version string */
#define ACPI_CA_VERSION 0x20050125
#define ACPI_CA_VERSION 0x20050211
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
......
include/acpi/acinterp.h
View file @ 3160222e
......@@ -217,8 +217,8 @@ acpi_ex_opcode_6A_0T_1R (
u8
acpi_ex_do_match (
u32 match_op,
acpi_integer package_value,
acpi_integer match_value);
union acpi_operand_object *package_obj,
union acpi_operand_object *match_obj);
acpi_status
acpi_ex_get_object_reference (
......@@ -617,6 +617,7 @@ acpi_ex_store_object_to_object (
acpi_status
acpi_ex_store_buffer_to_buffer (
acpi_object_type original_src_type,
union acpi_operand_object *source_desc,
union acpi_operand_object *target_desc);
......
include/acpi/platform/aclinux.h
View file @ 3160222e
......@@ -81,6 +81,8 @@
#define ACPI_USE_NATIVE_DIVIDE
#endif
#define __cdecl
#define ACPI_FLUSH_CPU_CACHE()
#endif /* __KERNEL__ */
/* Linux uses GCC */
......
include/asm-generic/4level-fixup.h
View file @ 3160222e
......@@ -24,7 +24,7 @@
#define pud_bad(pud) 0
#define pud_present(pud) 1
#define pud_ERROR(pud) do { } while (0)
#define pud_clear(pud) do { } while (0)
#define pud_clear(pud) pgd_clear(pud)
#undef pud_free_tlb
#define pud_free_tlb(tlb, x) do { } while (0)
......
include/asm-m32r/spinlock.h
View file @ 3160222e
......@@ -20,23 +20,13 @@ extern int printk(const char * fmt, ...)
#define RW_LOCK_BIAS 0x01000000
#define RW_LOCK_BIAS_STR "0x01000000"
/* It seems that people are forgetting to
* initialize their spinlocks properly, tsk tsk.
* Remember to turn this off in 2.4. -ben
*/
#if defined(CONFIG_DEBUG_SPINLOCK)
#define SPINLOCK_DEBUG 1
#else
#define SPINLOCK_DEBUG 0
#endif
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
*/
typedef struct {
volatile int lock;
#if SPINLOCK_DEBUG
volatile int slock;
#ifdef CONFIG_DEBUG_SPINLOCK
unsigned magic;
#endif
#ifdef CONFIG_PREEMPT
......@@ -46,7 +36,7 @@ typedef struct {
#define SPINLOCK_MAGIC 0xdead4ead
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
#define SPINLOCK_MAGIC_INIT , SPINLOCK_MAGIC
#else
#define SPINLOCK_MAGIC_INIT /* */
......@@ -63,7 +53,7 @@ typedef struct {
* We make no fairness assumptions. They have a cost.
*/
#define spin_is_locked(x) (*(volatile int *)(&(x)->lock) <= 0)
#define spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0)
#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x))
#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
......@@ -80,11 +70,11 @@ static inline int _raw_spin_trylock(spinlock_t *lock)
unsigned long tmp1, tmp2;
/*
* lock->lock : =1 : unlock
* lock->slock : =1 : unlock
* : <=0 : lock
* {
* oldval = lock->lock; <--+ need atomic operation
* lock->lock = 0; <--+
* oldval = lock->slock; <--+ need atomic operation
* lock->slock = 0; <--+
* }
*/
__asm__ __volatile__ (
......@@ -97,7 +87,7 @@ static inline int _raw_spin_trylock(spinlock_t *lock)
"unlock %1, @%3; \n\t"
"mvtc %2, psw; \n\t"
: "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
: "r" (&lock->lock)
: "r" (&lock->slock)
: "memory"
#ifdef CONFIG_CHIP_M32700_TS1
, "r6"
......@@ -111,22 +101,22 @@ static inline void _raw_spin_lock(spinlock_t *lock)
{
unsigned long tmp0, tmp1;
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
__label__ here;
here:
if (lock->magic != SPINLOCK_MAGIC) {
printk("eip: %p\n", &&here);
printk("pc: %p\n", &&here);
BUG();
}
#endif
/*
* lock->lock : =1 : unlock
* lock->slock : =1 : unlock
* : <=0 : lock
*
* for ( ; ; ) {
* lock->lock -= 1; <-- need atomic operation
* if (lock->lock == 0) break;
* for ( ; lock->lock <= 0 ; );
* lock->slock -= 1; <-- need atomic operation
* if (lock->slock == 0) break;
* for ( ; lock->slock <= 0 ; );
* }
*/
__asm__ __volatile__ (
......@@ -149,7 +139,7 @@ static inline void _raw_spin_lock(spinlock_t *lock)
"bra 2b; \n\t"
LOCK_SECTION_END
: "=&r" (tmp0), "=&r" (tmp1)
: "r" (&lock->lock)
: "r" (&lock->slock)
: "memory"
#ifdef CONFIG_CHIP_M32700_TS1
, "r6"
......@@ -159,12 +149,12 @@ static inline void _raw_spin_lock(spinlock_t *lock)
static inline void _raw_spin_unlock(spinlock_t *lock)
{
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
BUG_ON(lock->magic != SPINLOCK_MAGIC);
BUG_ON(!spin_is_locked(lock));
#endif
mb();
lock->lock = 1;
lock->slock = 1;
}
/*
......@@ -179,7 +169,7 @@ static inline void _raw_spin_unlock(spinlock_t *lock)
*/
typedef struct {
volatile int lock;
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
unsigned magic;
#endif
#ifdef CONFIG_PREEMPT
......@@ -189,7 +179,7 @@ typedef struct {
#define RWLOCK_MAGIC 0xdeaf1eed
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
#define RWLOCK_MAGIC_INIT , RWLOCK_MAGIC
#else
#define RWLOCK_MAGIC_INIT /* */
......@@ -199,6 +189,18 @@ typedef struct {
#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
/**
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
#define read_can_lock(x) ((int)(x)->lock > 0)
/**
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
/*
* On x86, we implement read-write locks as a 32-bit counter
* with the high bit (sign) being the "contended" bit.
......@@ -214,7 +216,7 @@ static inline void _raw_read_lock(rwlock_t *rw)
{
unsigned long tmp0, tmp1;
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
BUG_ON(rw->magic != RWLOCK_MAGIC);
#endif
/*
......@@ -268,7 +270,7 @@ static inline void _raw_write_lock(rwlock_t *rw)
{
unsigned long tmp0, tmp1, tmp2;
#if SPINLOCK_DEBUG
#ifdef CONFIG_DEBUG_SPINLOCK
BUG_ON(rw->magic != RWLOCK_MAGIC);
#endif
/*
......
mm/memory.c
View file @ 3160222e
......@@ -98,7 +98,8 @@ static inline void clear_pmd_range(struct mmu_gather *tlb, pmd_t *pmd, unsigned
pmd_clear(pmd);
return;
}
if (!(start & ~PMD_MASK) && !(end & ~PMD_MASK)) {
if (!((start | end) & ~PMD_MASK)) {
/* Only clear full, aligned ranges */
page = pmd_page(*pmd);
pmd_clear(pmd);
dec_page_state(nr_page_table_pages);
......@@ -131,7 +132,8 @@ static inline void clear_pud_range(struct mmu_gather *tlb, pud_t *pud, unsigned
addr = next;
} while (addr && (addr < end));
if (!(start & ~PUD_MASK) && !(end & ~PUD_MASK)) {
if (!((start | end) & ~PUD_MASK)) {
/* Only clear full, aligned ranges */
pud_clear(pud);
pmd_free_tlb(tlb, __pmd);
}
......@@ -162,7 +164,8 @@ static inline void clear_pgd_range(struct mmu_gather *tlb, pgd_t *pgd, unsigned
addr = next;
} while (addr && (addr < end));
if (!(start & ~PGDIR_MASK) && !(end & ~PGDIR_MASK)) {
if (!((start | end) & ~PGDIR_MASK)) {
/* Only clear full, aligned ranges */
pgd_clear(pgd);
pud_free_tlb(tlb, __pud);
}
......@@ -358,7 +361,7 @@ static int copy_pmd_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
for (; addr < end; addr = next, src_pmd++, dst_pmd++) {
next = (addr + PMD_SIZE) & PMD_MASK;
if (next > end)
if (next > end || next <= addr)
next = end;
if (pmd_none(*src_pmd))
continue;
......@@ -390,7 +393,7 @@ static int copy_pud_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
for (; addr < end; addr = next, src_pud++, dst_pud++) {
next = (addr + PUD_SIZE) & PUD_MASK;
if (next > end)
if (next > end || next <= addr)
next = end;
if (pud_none(*src_pud))
continue;
......@@ -1041,7 +1044,8 @@ static inline int zeromap_pud_range(struct mm_struct *mm, pud_t * pud,
error = -ENOMEM;
if (!pmd)
break;
error = zeromap_pmd_range(mm, pmd, address, end - address, prot);
error = zeromap_pmd_range(mm, pmd, base + address,
end - address, prot);
if (error)
break;
address = (address + PUD_SIZE) & PUD_MASK;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7