Commit 31ea7088 authored by bo yang's avatar bo yang Committed by James Bottomley

[SCSI] megaraid_sas: add hibernation support

Adding hibernation support. suspend, resume routine implemented.
Signed-off-by: default avatarBo Yang <bo.yang@lsi.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 1e6c38ce
......@@ -1803,6 +1803,81 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
}
/**
* megasas_issue_init_mfi - Initializes the FW
* @instance: Adapter soft state
*
* Issues the INIT MFI cmd
*/
static int
megasas_issue_init_mfi(struct megasas_instance *instance)
{
u32 context;
struct megasas_cmd *cmd;
struct megasas_init_frame *init_frame;
struct megasas_init_queue_info *initq_info;
dma_addr_t init_frame_h;
dma_addr_t initq_info_h;
/*
* Prepare a init frame. Note the init frame points to queue info
* structure. Each frame has SGL allocated after first 64 bytes. For
* this frame - since we don't need any SGL - we use SGL's space as
* queue info structure
*
* We will not get a NULL command below. We just created the pool.
*/
cmd = megasas_get_cmd(instance);
init_frame = (struct megasas_init_frame *)cmd->frame;
initq_info = (struct megasas_init_queue_info *)
((unsigned long)init_frame + 64);
init_frame_h = cmd->frame_phys_addr;
initq_info_h = init_frame_h + 64;
context = init_frame->context;
memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
init_frame->context = context;
initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h;
initq_info->producer_index_phys_addr_lo = instance->producer_h;
initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
init_frame->cmd = MFI_CMD_INIT;
init_frame->cmd_status = 0xFF;
init_frame->queue_info_new_phys_addr_lo = initq_info_h;
init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
/*
* disable the intr before firing the init frame to FW
*/
instance->instancet->disable_intr(instance->reg_set);
/*
* Issue the init frame in polled mode
*/
if (megasas_issue_polled(instance, cmd)) {
printk(KERN_ERR "megasas: Failed to init firmware\n");
megasas_return_cmd(instance, cmd);
goto fail_fw_init;
}
megasas_return_cmd(instance, cmd);
return 0;
fail_fw_init:
return -EINVAL;
}
/**
* megasas_init_mfi - Initializes the FW
* @instance: Adapter soft state
......@@ -1816,15 +1891,7 @@ static int megasas_init_mfi(struct megasas_instance *instance)
u32 max_sectors_1;
u32 max_sectors_2;
struct megasas_register_set __iomem *reg_set;
struct megasas_cmd *cmd;
struct megasas_ctrl_info *ctrl_info;
struct megasas_init_frame *init_frame;
struct megasas_init_queue_info *initq_info;
dma_addr_t init_frame_h;
dma_addr_t initq_info_h;
/*
* Map the message registers
*/
......@@ -1901,52 +1968,8 @@ static int megasas_init_mfi(struct megasas_instance *instance)
goto fail_reply_queue;
}
/*
* Prepare a init frame. Note the init frame points to queue info
* structure. Each frame has SGL allocated after first 64 bytes. For
* this frame - since we don't need any SGL - we use SGL's space as
* queue info structure
*
* We will not get a NULL command below. We just created the pool.
*/
cmd = megasas_get_cmd(instance);
init_frame = (struct megasas_init_frame *)cmd->frame;
initq_info = (struct megasas_init_queue_info *)
((unsigned long)init_frame + 64);
init_frame_h = cmd->frame_phys_addr;
initq_info_h = init_frame_h + 64;
memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h;
initq_info->producer_index_phys_addr_lo = instance->producer_h;
initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
init_frame->cmd = MFI_CMD_INIT;
init_frame->cmd_status = 0xFF;
init_frame->queue_info_new_phys_addr_lo = initq_info_h;
init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
/*
* disable the intr before firing the init frame to FW
*/
instance->instancet->disable_intr(instance->reg_set);
/*
* Issue the init frame in polled mode
*/
if (megasas_issue_polled(instance, cmd)) {
printk(KERN_DEBUG "megasas: Failed to init firmware\n");
if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
}
megasas_return_cmd(instance, cmd);
ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
......@@ -1982,7 +2005,6 @@ static int megasas_init_mfi(struct megasas_instance *instance)
return 0;
fail_fw_init:
megasas_return_cmd(instance, cmd);
pci_free_consistent(instance->pdev, reply_q_sz,
instance->reply_queue, instance->reply_queue_h);
......@@ -2264,6 +2286,28 @@ static int megasas_io_attach(struct megasas_instance *instance)
return 0;
}
static int
megasas_set_dma_mask(struct pci_dev *pdev)
{
/*
* All our contollers are capable of performing 64-bit DMA
*/
if (IS_DMA64) {
if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
goto fail_set_dma_mask;
}
} else {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
goto fail_set_dma_mask;
}
return 0;
fail_set_dma_mask:
return 1;
}
/**
* megasas_probe_one - PCI hotplug entry point
* @pdev: PCI device structure
......@@ -2297,19 +2341,8 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
/*
* All our contollers are capable of performing 64-bit DMA
*/
if (IS_DMA64) {
if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
goto fail_set_dma_mask;
}
} else {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
if (megasas_set_dma_mask(pdev))
goto fail_set_dma_mask;
}
host = scsi_host_alloc(&megasas_template,
sizeof(struct megasas_instance));
......@@ -2491,8 +2524,10 @@ static void megasas_flush_cache(struct megasas_instance *instance)
/**
* megasas_shutdown_controller - Instructs FW to shutdown the controller
* @instance: Adapter soft state
* @opcode: Shutdown/Hibernate
*/
static void megasas_shutdown_controller(struct megasas_instance *instance)
static void megasas_shutdown_controller(struct megasas_instance *instance,
u32 opcode)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
......@@ -2515,7 +2550,7 @@ static void megasas_shutdown_controller(struct megasas_instance *instance)
dcmd->flags = MFI_FRAME_DIR_NONE;
dcmd->timeout = 0;
dcmd->data_xfer_len = 0;
dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN;
dcmd->opcode = opcode;
megasas_issue_blocked_cmd(instance, cmd);
......@@ -2524,6 +2559,131 @@ static void megasas_shutdown_controller(struct megasas_instance *instance)
return;
}
/**
* megasas_suspend - driver suspend entry point
* @pdev: PCI device structure
* @state: PCI power state to suspend routine
*/
static int __devinit
megasas_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *host;
struct megasas_instance *instance;
instance = pci_get_drvdata(pdev);
host = instance->host;
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
tasklet_kill(&instance->isr_tasklet);
pci_set_drvdata(instance->pdev, instance);
instance->instancet->disable_intr(instance->reg_set);
free_irq(instance->pdev->irq, instance);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
/**
* megasas_resume- driver resume entry point
* @pdev: PCI device structure
*/
static int __devinit
megasas_resume(struct pci_dev *pdev)
{
int rval;
struct Scsi_Host *host;
struct megasas_instance *instance;
instance = pci_get_drvdata(pdev);
host = instance->host;
pci_set_power_state(pdev, PCI_D0);
pci_enable_wake(pdev, PCI_D0, 0);
pci_restore_state(pdev);
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
rval = pci_enable_device(pdev);
if (rval) {
printk(KERN_ERR "megasas: Enable device failed\n");
return rval;
}
pci_set_master(pdev);
if (megasas_set_dma_mask(pdev))
goto fail_set_dma_mask;
/*
* Initialize MFI Firmware
*/
*instance->producer = 0;
*instance->consumer = 0;
atomic_set(&instance->fw_outstanding, 0);
/*
* We expect the FW state to be READY
*/
if (megasas_transition_to_ready(instance))
goto fail_ready_state;
if (megasas_issue_init_mfi(instance))
goto fail_init_mfi;
tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
(unsigned long)instance);
/*
* Register IRQ
*/
if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED,
"megasas", instance)) {
printk(KERN_ERR "megasas: Failed to register IRQ\n");
goto fail_irq;
}
instance->instancet->enable_intr(instance->reg_set);
/*
* Initiate AEN (Asynchronous Event Notification)
*/
if (megasas_start_aen(instance))
printk(KERN_ERR "megasas: Start AEN failed\n");
return 0;
fail_irq:
fail_init_mfi:
if (instance->evt_detail)
pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
instance->evt_detail,
instance->evt_detail_h);
if (instance->producer)
pci_free_consistent(pdev, sizeof(u32), instance->producer,
instance->producer_h);
if (instance->consumer)
pci_free_consistent(pdev, sizeof(u32), instance->consumer,
instance->consumer_h);
scsi_host_put(host);
fail_set_dma_mask:
fail_ready_state:
pci_disable_device(pdev);
return -ENODEV;
}
/**
* megasas_detach_one - PCI hot"un"plug entry point
* @pdev: PCI device structure
......@@ -2539,7 +2699,7 @@ static void megasas_detach_one(struct pci_dev *pdev)
scsi_remove_host(instance->host);
megasas_flush_cache(instance);
megasas_shutdown_controller(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
tasklet_kill(&instance->isr_tasklet);
/*
......@@ -2978,6 +3138,8 @@ static struct pci_driver megasas_pci_driver = {
.id_table = megasas_pci_table,
.probe = megasas_probe_one,
.remove = __devexit_p(megasas_detach_one),
.suspend = megasas_suspend,
.resume = megasas_resume,
.shutdown = megasas_shutdown,
};
......
......@@ -117,6 +117,7 @@
#define MR_FLUSH_DISK_CACHE 0x02
#define MR_DCMD_CTRL_SHUTDOWN 0x01050000
#define MR_DCMD_HIBERNATE_SHUTDOWN 0x01060000
#define MR_ENABLE_DRIVE_SPINDOWN 0x01
#define MR_DCMD_CTRL_EVENT_GET_INFO 0x01040100
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment