Merge branch 'qcom-emac-acpi'

Timur Tabi says:

====================
Add basic ACPI support to the Qualcomm Technologies EMAC driver

This patch series adds support to the EMAC driver for extracting addresses,
interrupts, and some _DSDs (properties) from ACPI.  The first two patches
clean up the code, and the third patch adds ACPI-specific functionality.

The first patch fixes a bug with handling the platform_device for the
internal PHY.  This phy is treated as a separate device in both DT and
ACPI, but since the platform is not released automatically when the
driver unloads, managed functions like devm_ioremap_resource cannot be
used.

The second patch replaces of_get_mac_address with its platform-independent
equivalent device_get_mac_address.

The third patch parses the ACPI tables to obtain the platform_device for
the primary EMAC node ("QCOM8070") and the internal phy node ("QCOM8071").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qualcomm/emac/emac-phy.c

@@ -19,6 +19,7 @@
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
 #include <linux/iopoll.h>
+#include <linux/acpi.h>
 #include "emac.h"
 #include "emac-mac.h"
 #include "emac-phy.h"
@@ -167,7 +168,6 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
 int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct device_node *phy_np;
 	struct mii_bus *mii_bus;
 	int ret;
 
@@ -183,6 +183,27 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
 	mii_bus->parent = &pdev->dev;
 	mii_bus->priv = adpt;
 
+	if (has_acpi_companion(&pdev->dev)) {
+		u32 phy_addr;
+
+		ret = mdiobus_register(mii_bus);
+		if (ret) {
+			dev_err(&pdev->dev, "could not register mdio bus\n");
+			return ret;
+		}
+		ret = device_property_read_u32(&pdev->dev, "phy-channel",
+					       &phy_addr);
+		if (ret)
+			/* If we can't read a valid phy address, then assume
+			 * that there is only one phy on this mdio bus.
+			 */
+			adpt->phydev = phy_find_first(mii_bus);
+		else
+			adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr);
+
+	} else {
+		struct device_node *phy_np;
+
 		ret = of_mdiobus_register(mii_bus, np);
 		if (ret) {
 			dev_err(&pdev->dev, "could not register mdio bus\n");
@@ -191,6 +212,8 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
 
 		phy_np = of_parse_phandle(np, "phy-handle", 0);
 		adpt->phydev = of_phy_find_device(phy_np);
+	}
+
 	if (!adpt->phydev) {
 		dev_err(&pdev->dev, "could not find external phy\n");
 		mdiobus_unregister(mii_bus);

drivers/net/ethernet/qualcomm/emac/emac-sgmii.c

@@ -14,6 +14,7 @@
  */
 
 #include <linux/iopoll.h>
+#include <linux/acpi.h>
 #include <linux/of_device.h>
 #include "emac.h"
 #include "emac-mac.h"
@@ -662,6 +663,24 @@ void emac_sgmii_reset(struct emac_adapter *adpt)
 	clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000);
 }
 
+static int emac_sgmii_acpi_match(struct device *dev, void *data)
+{
+	static const struct acpi_device_id match_table[] = {
+		{
+			.id = "QCOM8071",
+			.driver_data = (kernel_ulong_t)emac_sgmii_init_v2,
+		},
+		{}
+	};
+	const struct acpi_device_id *id = acpi_match_device(match_table, dev);
+	emac_sgmii_initialize *initialize = data;
+
+	if (id)
+		*initialize = (emac_sgmii_initialize)id->driver_data;
+
+	return !!id;
+}
+
 static const struct of_device_id emac_sgmii_dt_match[] = {
 	{
 		.compatible = "qcom,fsm9900-emac-sgmii",
@@ -679,6 +698,21 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
 	struct platform_device *sgmii_pdev = NULL;
 	struct emac_phy *phy = &adpt->phy;
 	struct resource *res;
+	int ret;
+
+	if (has_acpi_companion(&pdev->dev)) {
+		struct device *dev;
+
+		dev = device_find_child(&pdev->dev, &phy->initialize,
+					emac_sgmii_acpi_match);
+
+		if (!dev) {
+			dev_err(&pdev->dev, "cannot find internal phy node\n");
+			return -ENODEV;
+		}
+
+		sgmii_pdev = to_platform_device(dev);
+	} else {
 		const struct of_device_id *match;
 		struct device_node *np;
 
@@ -697,25 +731,49 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
 		match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev);
 		if (!match) {
 			dev_err(&pdev->dev, "unrecognized internal phy node\n");
-		return -ENODEV;
+			ret = -ENODEV;
+			goto error_put_device;
 		}
 
 		phy->initialize = (emac_sgmii_initialize)match->data;
+	}
 
 	/* Base address is the first address */
 	res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0);
-	phy->base = devm_ioremap_resource(&sgmii_pdev->dev, res);
-	if (IS_ERR(phy->base))
-		return PTR_ERR(phy->base);
+	phy->base = ioremap(res->start, resource_size(res));
+	if (IS_ERR(phy->base)) {
+		ret = PTR_ERR(phy->base);
+		goto error_put_device;
+	}
 
 	/* v2 SGMII has a per-lane digital digital, so parse it if it exists */
 	res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 1);
 	if (res) {
-		phy->digital = devm_ioremap_resource(&sgmii_pdev->dev, res);
-		if (IS_ERR(phy->base))
-			return PTR_ERR(phy->base);
-
+		phy->digital = ioremap(res->start, resource_size(res));
+		if (IS_ERR(phy->digital)) {
+			ret = PTR_ERR(phy->digital);
+			goto error_unmap_base;
+		}
 	}
 
-	return phy->initialize(adpt);
+	ret = phy->initialize(adpt);
+	if (ret)
+		goto error;
+
+	/* We've remapped the addresses, so we don't need the device any
+	 * more.  of_find_device_by_node() says we should release it.
+	 */
+	put_device(&sgmii_pdev->dev);
+
+	return 0;
+
+error:
+	if (phy->digital)
+		iounmap(phy->digital);
+error_unmap_base:
+	iounmap(phy->base);
+error_put_device:
+	put_device(&sgmii_pdev->dev);
+
+	return ret;
 }

drivers/net/ethernet/qualcomm/emac/emac.c

@@ -22,6 +22,7 @@
 #include <linux/of_device.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/acpi.h>
 #include "emac.h"
 #include "emac-mac.h"
 #include "emac-phy.h"
@@ -531,18 +532,16 @@ static void emac_clks_teardown(struct emac_adapter *adpt)
 static int emac_probe_resources(struct platform_device *pdev,
 				struct emac_adapter *adpt)
 {
-	struct device_node *node = pdev->dev.of_node;
 	struct net_device *netdev = adpt->netdev;
 	struct resource *res;
-	const void *maddr;
+	char maddr[ETH_ALEN];
 	int ret = 0;
 
 	/* get mac address */
-	maddr = of_get_mac_address(node);
-	if (!maddr)
-		eth_hw_addr_random(netdev);
-	else
+	if (device_get_mac_address(&pdev->dev, maddr, ETH_ALEN))
 		ether_addr_copy(netdev->dev_addr, maddr);
+	else
+		eth_hw_addr_random(netdev);
 
 	/* Core 0 interrupt */
 	ret = platform_get_irq(pdev, 0);
@@ -577,6 +576,16 @@ static const struct of_device_id emac_dt_match[] = {
 	{}
 };
 
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id emac_acpi_match[] = {
+	{
+		.id = "QCOM8070",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, emac_acpi_match);
+#endif
+
 static int emac_probe(struct platform_device *pdev)
 {
 	struct net_device *netdev;
@@ -723,6 +732,10 @@ static int emac_remove(struct platform_device *pdev)
 	mdiobus_unregister(adpt->mii_bus);
 	free_netdev(netdev);
 
+	if (adpt->phy.digital)
+		iounmap(adpt->phy.digital);
+	iounmap(adpt->phy.base);
+
 	return 0;
 }
 
@@ -732,6 +745,7 @@ static struct platform_driver emac_platform_driver = {
 	.driver = {
 		.name		= "qcom-emac",
 		.of_match_table = emac_dt_match,
+		.acpi_match_table = ACPI_PTR(emac_acpi_match),
 	},
 };