Commit 32c9edc4 authored by Zhang Rui's avatar Zhang Rui

Merge branch 'fixes' of...

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
parents 59c56eb6 503ccc3f
......@@ -4,6 +4,8 @@
* Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
* Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
*
* Copyright (C) 2014 Viresh Kumar <viresh.kumar@linaro.org>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -28,6 +30,20 @@
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
/*
* Cooling state <-> CPUFreq frequency
*
* Cooling states are translated to frequencies throughout this driver and this
* is the relation between them.
*
* Highest cooling state corresponds to lowest possible frequency.
*
* i.e.
* level 0 --> 1st Max Freq
* level 1 --> 2nd Max Freq
* ...
*/
/**
* struct cpufreq_cooling_device - data for cooling device with cpufreq
* @id: unique integer value corresponding to each cpufreq_cooling_device
......@@ -38,25 +54,26 @@
* cooling devices.
* @cpufreq_val: integer value representing the absolute value of the clipped
* frequency.
* @max_level: maximum cooling level. One less than total number of valid
* cpufreq frequencies.
* @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
*
* This structure is required for keeping information of each
* cpufreq_cooling_device registered. In order to prevent corruption of this a
* mutex lock cooling_cpufreq_lock is used.
* This structure is required for keeping information of each registered
* cpufreq_cooling_device.
*/
struct cpufreq_cooling_device {
int id;
struct thermal_cooling_device *cool_dev;
unsigned int cpufreq_state;
unsigned int cpufreq_val;
unsigned int max_level;
unsigned int *freq_table; /* In descending order */
struct cpumask allowed_cpus;
struct list_head node;
};
static DEFINE_IDR(cpufreq_idr);
static DEFINE_MUTEX(cooling_cpufreq_lock);
static unsigned int cpufreq_dev_count;
static LIST_HEAD(cpufreq_dev_list);
/**
......@@ -98,120 +115,30 @@ static void release_idr(struct idr *idr, int id)
/* Below code defines functions to be used for cpufreq as cooling device */
/**
* is_cpufreq_valid - function to check frequency transitioning capability.
* @cpu: cpu for which check is needed.
*
* This function will check the current state of the system if
* it is capable of changing the frequency for a given @cpu.
* get_level: Find the level for a particular frequency
* @cpufreq_dev: cpufreq_dev for which the property is required
* @freq: Frequency
*
* Return: 0 if the system is not currently capable of changing
* the frequency of given cpu. !0 in case the frequency is changeable.
* Return: level on success, THERMAL_CSTATE_INVALID on error.
*/
static int is_cpufreq_valid(int cpu)
static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev,
unsigned int freq)
{
struct cpufreq_policy policy;
unsigned long level;
return !cpufreq_get_policy(&policy, cpu);
}
enum cpufreq_cooling_property {
GET_LEVEL,
GET_FREQ,
GET_MAXL,
};
for (level = 0; level <= cpufreq_dev->max_level; level++) {
if (freq == cpufreq_dev->freq_table[level])
return level;
/**
* get_property - fetch a property of interest for a give cpu.
* @cpu: cpu for which the property is required
* @input: query parameter
* @output: query return
* @property: type of query (frequency, level, max level)
*
* This is the common function to
* 1. get maximum cpu cooling states
* 2. translate frequency to cooling state
* 3. translate cooling state to frequency
* Note that the code may be not in good shape
* but it is written in this way in order to:
* a) reduce duplicate code as most of the code can be shared.
* b) make sure the logic is consistent when translating between
* cooling states and frequencies.
*
* Return: 0 on success, -EINVAL when invalid parameters are passed.
*/
static int get_property(unsigned int cpu, unsigned long input,
unsigned int *output,
enum cpufreq_cooling_property property)
{
int i;
unsigned long max_level = 0, level = 0;
unsigned int freq = CPUFREQ_ENTRY_INVALID;
int descend = -1;
struct cpufreq_frequency_table *pos, *table =
cpufreq_frequency_get_table(cpu);
if (!output)
return -EINVAL;
if (!table)
return -EINVAL;
cpufreq_for_each_valid_entry(pos, table) {
/* ignore duplicate entry */
if (freq == pos->frequency)
continue;
/* get the frequency order */
if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
descend = freq > pos->frequency;
freq = pos->frequency;
max_level++;
if (freq > cpufreq_dev->freq_table[level])
break;
}
/* No valid cpu frequency entry */
if (max_level == 0)
return -EINVAL;
/* max_level is an index, not a counter */
max_level--;
/* get max level */
if (property == GET_MAXL) {
*output = (unsigned int)max_level;
return 0;
}
if (property == GET_FREQ)
level = descend ? input : (max_level - input);
i = 0;
cpufreq_for_each_valid_entry(pos, table) {
/* ignore duplicate entry */
if (freq == pos->frequency)
continue;
/* now we have a valid frequency entry */
freq = pos->frequency;
if (property == GET_LEVEL && (unsigned int)input == freq) {
/* get level by frequency */
*output = descend ? i : (max_level - i);
return 0;
}
if (property == GET_FREQ && level == i) {
/* get frequency by level */
*output = freq;
return 0;
}
i++;
}
return -EINVAL;
return THERMAL_CSTATE_INVALID;
}
/**
* cpufreq_cooling_get_level - for a give cpu, return the cooling level.
* cpufreq_cooling_get_level - for a given cpu, return the cooling level.
* @cpu: cpu for which the level is required
* @freq: the frequency of interest
*
......@@ -223,77 +150,21 @@ static int get_property(unsigned int cpu, unsigned long input,
*/
unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
{
unsigned int val;
if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL))
return THERMAL_CSTATE_INVALID;
return (unsigned long)val;
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
/**
* get_cpu_frequency - get the absolute value of frequency from level.
* @cpu: cpu for which frequency is fetched.
* @level: cooling level
*
* This function matches cooling level with frequency. Based on a cooling level
* of frequency, equals cooling state of cpu cooling device, it will return
* the corresponding frequency.
* e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
*
* Return: 0 on error, the corresponding frequency otherwise.
*/
static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
{
int ret = 0;
unsigned int freq;
ret = get_property(cpu, level, &freq, GET_FREQ);
if (ret)
return 0;
return freq;
}
/**
* cpufreq_apply_cooling - function to apply frequency clipping.
* @cpufreq_device: cpufreq_cooling_device pointer containing frequency
* clipping data.
* @cooling_state: value of the cooling state.
*
* Function used to make sure the cpufreq layer is aware of current thermal
* limits. The limits are applied by updating the cpufreq policy.
*
* Return: 0 on success, an error code otherwise (-EINVAL in case wrong
* cooling state).
*/
static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
unsigned long cooling_state)
{
unsigned int cpuid, clip_freq;
struct cpumask *mask = &cpufreq_device->allowed_cpus;
unsigned int cpu = cpumask_any(mask);
/* Check if the old cooling action is same as new cooling action */
if (cpufreq_device->cpufreq_state == cooling_state)
return 0;
clip_freq = get_cpu_frequency(cpu, cooling_state);
if (!clip_freq)
return -EINVAL;
cpufreq_device->cpufreq_state = cooling_state;
cpufreq_device->cpufreq_val = clip_freq;
struct cpufreq_cooling_device *cpufreq_dev;
for_each_cpu(cpuid, mask) {
if (is_cpufreq_valid(cpuid))
cpufreq_update_policy(cpuid);
mutex_lock(&cooling_cpufreq_lock);
list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
mutex_unlock(&cooling_cpufreq_lock);
return get_level(cpufreq_dev, freq);
}
}
mutex_unlock(&cooling_cpufreq_lock);
return 0;
pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
return THERMAL_CSTATE_INVALID;
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
/**
* cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
......@@ -323,11 +194,6 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
&cpufreq_dev->allowed_cpus))
continue;
if (!cpufreq_dev->cpufreq_val)
cpufreq_dev->cpufreq_val = get_cpu_frequency(
cpumask_any(&cpufreq_dev->allowed_cpus),
cpufreq_dev->cpufreq_state);
max_freq = cpufreq_dev->cpufreq_val;
if (policy->max != max_freq)
......@@ -354,19 +220,9 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
struct cpumask *mask = &cpufreq_device->allowed_cpus;
unsigned int cpu;
unsigned int count = 0;
int ret;
cpu = cpumask_any(mask);
ret = get_property(cpu, 0, &count, GET_MAXL);
if (count > 0)
*state = count;
return ret;
*state = cpufreq_device->max_level;
return 0;
}
/**
......@@ -403,8 +259,24 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus);
unsigned int clip_freq;
/* Request state should be less than max_level */
if (WARN_ON(state > cpufreq_device->max_level))
return -EINVAL;
/* Check if the old cooling action is same as new cooling action */
if (cpufreq_device->cpufreq_state == state)
return 0;
clip_freq = cpufreq_device->freq_table[state];
cpufreq_device->cpufreq_state = state;
cpufreq_device->cpufreq_val = clip_freq;
return cpufreq_apply_cooling(cpufreq_device, state);
cpufreq_update_policy(cpu);
return 0;
}
/* Bind cpufreq callbacks to thermal cooling device ops */
......@@ -419,10 +291,25 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
.notifier_call = cpufreq_thermal_notifier,
};
static unsigned int find_next_max(struct cpufreq_frequency_table *table,
unsigned int prev_max)
{
struct cpufreq_frequency_table *pos;
unsigned int max = 0;
cpufreq_for_each_valid_entry(pos, table) {
if (pos->frequency > max && pos->frequency < prev_max)
max = pos->frequency;
}
return max;
}
/**
* __cpufreq_cooling_register - helper function to create cpufreq cooling device
* @np: a valid struct device_node to the cooling device device tree node
* @clip_cpus: cpumask of cpus where the frequency constraints will happen.
* Normally this should be same as cpufreq policy->related_cpus.
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
......@@ -437,37 +324,42 @@ __cpufreq_cooling_register(struct device_node *np,
const struct cpumask *clip_cpus)
{
struct thermal_cooling_device *cool_dev;
struct cpufreq_cooling_device *cpufreq_dev = NULL;
unsigned int min = 0, max = 0;
struct cpufreq_cooling_device *cpufreq_dev;
char dev_name[THERMAL_NAME_LENGTH];
int ret = 0, i;
struct cpufreq_policy policy;
struct cpufreq_frequency_table *pos, *table;
unsigned int freq, i;
int ret;
/* Verify that all the clip cpus have same freq_min, freq_max limit */
for_each_cpu(i, clip_cpus) {
/* continue if cpufreq policy not found and not return error */
if (!cpufreq_get_policy(&policy, i))
continue;
if (min == 0 && max == 0) {
min = policy.cpuinfo.min_freq;
max = policy.cpuinfo.max_freq;
} else {
if (min != policy.cpuinfo.min_freq ||
max != policy.cpuinfo.max_freq)
return ERR_PTR(-EINVAL);
}
table = cpufreq_frequency_get_table(cpumask_first(clip_cpus));
if (!table) {
pr_debug("%s: CPUFreq table not found\n", __func__);
return ERR_PTR(-EPROBE_DEFER);
}
cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
GFP_KERNEL);
cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL);
if (!cpufreq_dev)
return ERR_PTR(-ENOMEM);
/* Find max levels */
cpufreq_for_each_valid_entry(pos, table)
cpufreq_dev->max_level++;
cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) *
cpufreq_dev->max_level, GFP_KERNEL);
if (!cpufreq_dev->freq_table) {
cool_dev = ERR_PTR(-ENOMEM);
goto free_cdev;
}
/* max_level is an index, not a counter */
cpufreq_dev->max_level--;
cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
if (ret) {
kfree(cpufreq_dev);
return ERR_PTR(-EINVAL);
cool_dev = ERR_PTR(ret);
goto free_table;
}
snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
......@@ -475,24 +367,43 @@ __cpufreq_cooling_register(struct device_node *np,
cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
&cpufreq_cooling_ops);
if (IS_ERR(cool_dev)) {
release_idr(&cpufreq_idr, cpufreq_dev->id);
kfree(cpufreq_dev);
return cool_dev;
if (IS_ERR(cool_dev))
goto remove_idr;
/* Fill freq-table in descending order of frequencies */
for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
freq = find_next_max(table, freq);
cpufreq_dev->freq_table[i] = freq;
/* Warn for duplicate entries */
if (!freq)
pr_warn("%s: table has duplicate entries\n", __func__);
else
pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
cpufreq_dev->cool_dev = cool_dev;
cpufreq_dev->cpufreq_state = 0;
mutex_lock(&cooling_cpufreq_lock);
/* Register the notifier for first cpufreq cooling device */
if (cpufreq_dev_count == 0)
if (list_empty(&cpufreq_dev_list))
cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
cpufreq_dev_count++;
list_add(&cpufreq_dev->node, &cpufreq_dev_list);
mutex_unlock(&cooling_cpufreq_lock);
return cool_dev;
remove_idr:
release_idr(&cpufreq_idr, cpufreq_dev->id);
free_table:
kfree(cpufreq_dev->freq_table);
free_cdev:
kfree(cpufreq_dev);
return cool_dev;
}
......@@ -554,16 +465,16 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
cpufreq_dev = cdev->devdata;
mutex_lock(&cooling_cpufreq_lock);
list_del(&cpufreq_dev->node);
cpufreq_dev_count--;
/* Unregister the notifier for the last cpufreq cooling device */
if (cpufreq_dev_count == 0)
if (list_empty(&cpufreq_dev_list))
cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
mutex_unlock(&cooling_cpufreq_lock);
thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
release_idr(&cpufreq_idr, cpufreq_dev->id);
kfree(cpufreq_dev->freq_table);
kfree(cpufreq_dev);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);
......@@ -18,7 +18,6 @@
*/
#include <linux/cpu_cooling.h>
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
......@@ -28,18 +27,17 @@
static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
struct cpumask mask_val;
/* make sure cpufreq driver has been initialized */
if (!cpufreq_frequency_get_table(0))
return -EPROBE_DEFER;
cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(cdev)) {
int ret = PTR_ERR(cdev);
cpumask_set_cpu(0, &mask_val);
cdev = cpufreq_cooling_register(&mask_val);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Failed to register cooling device %d\n",
ret);
if (IS_ERR(cdev)) {
dev_err(&pdev->dev, "Failed to register cooling device\n");
return PTR_ERR(cdev);
return ret;
}
platform_set_drvdata(pdev, cdev);
......
......@@ -9,7 +9,6 @@
#include <linux/clk.h>
#include <linux/cpu_cooling.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
......@@ -454,15 +453,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
const struct of_device_id *of_id =
of_match_device(of_imx_thermal_match, &pdev->dev);
struct imx_thermal_data *data;
struct cpumask clip_cpus;
struct regmap *map;
int measure_freq;
int ret;
if (!cpufreq_get_current_driver()) {
dev_dbg(&pdev->dev, "no cpufreq driver!");
return -EPROBE_DEFER;
}
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
......@@ -516,12 +510,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
cpumask_set_cpu(0, &clip_cpus);
data->cdev = cpufreq_cooling_register(&clip_cpus);
data->cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(data->cdev)) {
ret = PTR_ERR(data->cdev);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"failed to register cpufreq cooling device: %d\n", ret);
"failed to register cpufreq cooling device: %d\n",
ret);
return ret;
}
......
config EXYNOS_THERMAL
tristate "Exynos thermal management unit driver"
depends on ARCH_HAS_BANDGAP && OF
depends on OF
help
If you say yes here you get support for the TMU (Thermal Management
Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises
......
......@@ -347,7 +347,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf)
int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
{
int ret;
struct cpumask mask_val;
struct exynos_thermal_zone *th_zone;
if (!sensor_conf || !sensor_conf->read_temperature) {
......@@ -367,13 +366,14 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
* sensor
*/
if (sensor_conf->cooling_data.freq_clip_count > 0) {
cpumask_set_cpu(0, &mask_val);
th_zone->cool_dev[th_zone->cool_dev_size] =
cpufreq_cooling_register(&mask_val);
cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]);
if (ret != -EPROBE_DEFER)
dev_err(sensor_conf->dev,
"Failed to register cpufreq cooling device\n");
ret = -EINVAL;
"Failed to register cpufreq cooling device: %d\n",
ret);
goto err_unregister;
}
th_zone->cool_dev_size++;
......
......@@ -927,7 +927,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
/* Register the sensor with thermal management interface */
ret = exynos_register_thermal(sensor_conf);
if (ret) {
dev_err(&pdev->dev, "Failed to register thermal interface\n");
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Failed to register thermal interface: %d\n",
ret);
goto err_clk;
}
data->reg_conf = sensor_conf;
......
......@@ -930,7 +930,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
struct thermal_zone_device *pos1;
struct thermal_cooling_device *pos2;
unsigned long max_state;
int result;
int result, ret;
if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
return -EINVAL;
......@@ -947,7 +947,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
if (tz != pos1 || cdev != pos2)
return -EINVAL;
cdev->ops->get_max_state(cdev, &max_state);
ret = cdev->ops->get_max_state(cdev, &max_state);
if (ret)
return ret;
/* lower default 0, upper default max_state */
lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
......
......@@ -28,7 +28,6 @@
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/thermal.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>
......@@ -407,17 +406,17 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
if (!data)
return -EINVAL;
if (!cpufreq_get_current_driver()) {
dev_dbg(bgp->dev, "no cpufreq driver yet\n");
return -EPROBE_DEFER;
}
/* Register cooling device */
data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(data->cool_dev)) {
int ret = PTR_ERR(data->cool_dev);
if (ret != -EPROBE_DEFER)
dev_err(bgp->dev,
"Failed to register cpufreq cooling device\n");
return PTR_ERR(data->cool_dev);
"Failed to register cpu cooling device %d\n",
ret);
return ret;
}
ti_bandgap_set_sensor_data(bgp, id, data);
......
......@@ -11,7 +11,7 @@
#define _DT_BINDINGS_THERMAL_THERMAL_H
/* On cooling devices upper and lower limits */
#define THERMAL_NO_LIMIT (-1UL)
#define THERMAL_NO_LIMIT (~0)
#endif
......@@ -50,7 +50,7 @@ static inline struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
const struct cpumask *clip_cpus)
{
return NULL;
return ERR_PTR(-ENOSYS);
}
#endif
......@@ -65,13 +65,13 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq);
static inline struct thermal_cooling_device *
cpufreq_cooling_register(const struct cpumask *clip_cpus)
{
return NULL;
return ERR_PTR(-ENOSYS);
}
static inline struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
const struct cpumask *clip_cpus)
{
return NULL;
return ERR_PTR(-ENOSYS);
}
static inline
void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
......
......@@ -38,7 +38,7 @@
#define THERMAL_CSTATE_INVALID -1UL
/* No upper/lower limit requirement */
#define THERMAL_NO_LIMIT THERMAL_CSTATE_INVALID
#define THERMAL_NO_LIMIT ((u32)~0)
/* Unit conversion macros */
#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment