ASoC: Intel: mrfld- add ACPI module

Add the last ACPI module support which also uses core module like the PCI
part
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/Kconfig

@@ -20,6 +20,11 @@ config SND_SST_IPC_PCI
 	tristate
 	select SND_SST_IPC
 
+config SND_SST_IPC_ACPI
+	tristate
+	select SND_SST_IPC
+	depends on ACPI
+
 config SND_SOC_INTEL_SST
 	tristate "ASoC support for Intel(R) Smart Sound Technology"
 	select SND_SOC_INTEL_SST_ACPI if ACPI

sound/soc/intel/sst/Makefile

 snd-intel-sst-core-objs := sst.o sst_ipc.o sst_stream.o sst_drv_interface.o sst_loader.o sst_pvt.o
 snd-intel-sst-pci-objs += sst_pci.o
-
+snd-intel-sst-acpi-objs += sst_acpi.o
 
 obj-$(CONFIG_SND_SST_IPC) += snd-intel-sst-core.o
 obj-$(CONFIG_SND_SST_IPC_PCI) += snd-intel-sst-pci.o
-
+obj-$(CONFIG_SND_SST_IPC_ACPI) += snd-intel-sst-acpi.o

sound/soc/intel/sst/sst.c

@@ -26,6 +26,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/pm_qos.h>
 #include <linux/async.h>
+#include <linux/acpi.h>
 #include <sound/core.h>
 #include <sound/soc.h>
 #include <asm/platform_sst_audio.h>
@@ -181,6 +182,7 @@ int sst_driver_ops(struct intel_sst_drv *sst)
 
 	switch (sst->dev_id) {
 	case SST_MRFLD_PCI_ID:
+	case SST_BYT_ACPI_ID:
 		sst->tstamp = SST_TIME_STAMP_MRFLD;
 		sst->ops = &mrfld_ops;
 		return 0;
@@ -323,7 +325,7 @@ EXPORT_SYMBOL_GPL(sst_context_init);
 void sst_context_cleanup(struct intel_sst_drv *ctx)
 {
 	pm_runtime_get_noresume(ctx->dev);
-	pm_runtime_forbid(ctx->dev);
+	pm_runtime_disable(ctx->dev);
 	sst_unregister(ctx->dev);
 	sst_set_fw_state_locked(ctx, SST_SHUTDOWN);
 	flush_scheduled_work();
@@ -371,8 +373,19 @@ void sst_configure_runtime_pm(struct intel_sst_drv *ctx)
 {
 	pm_runtime_set_autosuspend_delay(ctx->dev, SST_SUSPEND_DELAY);
 	pm_runtime_use_autosuspend(ctx->dev);
+	/*
+	 * For acpi devices, the actual physical device state is
+	 * initially active. So change the state to active before
+	 * enabling the pm
+	 */
+	if (acpi_disabled) {
+		pm_runtime_set_active(ctx->dev);
+		pm_runtime_enable(ctx->dev);
+	} else {
 		pm_runtime_allow(ctx->dev);
 		pm_runtime_put_noidle(ctx->dev);
+	}
+	sst_save_shim64(ctx, ctx->shim, ctx->shim_regs64);
 }
 EXPORT_SYMBOL_GPL(sst_configure_runtime_pm);
 
@@ -395,6 +408,9 @@ static int intel_sst_runtime_suspend(struct device *dev)
 	synchronize_irq(ctx->irq_num);
 	flush_workqueue(ctx->post_msg_wq);
 
+	/* save the shim registers because PMC doesn't save state */
+	sst_save_shim64(ctx, ctx->shim, ctx->shim_regs64);
+
 	return ret;
 }
 

sound/soc/intel/sst/sst.h

@@ -29,6 +29,7 @@
 /* driver names */
 #define SST_DRV_NAME "intel_sst_driver"
 #define SST_MRFLD_PCI_ID 0x119A
+#define SST_BYT_ACPI_ID	0x80860F28
 
 #define SST_SUSPEND_DELAY 2000
 #define FW_CONTEXT_MEM (64*1024)

sound/soc/intel/sst/sst_pvt.c

@@ -117,6 +117,7 @@ unsigned long long read_shim_data(struct intel_sst_drv *sst, int addr)
 
 	switch (sst->dev_id) {
 	case SST_MRFLD_PCI_ID:
+	case SST_BYT_ACPI_ID:
 		val = sst_shim_read64(sst->shim, addr);
 		break;
 	}
@@ -128,6 +129,7 @@ void write_shim_data(struct intel_sst_drv *sst, int addr,
 {
 	switch (sst->dev_id) {
 	case SST_MRFLD_PCI_ID:
+	case SST_BYT_ACPI_ID:
 		sst_shim_write64(sst->shim, addr, (u64) data);
 		break;
 	}