Commit 347d8f1f authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] siano: add new devices to the Siano Driver

This patch is based on Doron Cohen's patches:
	http://patchwork.linuxtv.org/patch/7881/
	http://patchwork.linuxtv.org/patch/7888/
	http://patchwork.linuxtv.org/patch/7883/
It basically merges the above patches, rebasing them to
the macro definitions used upstream, with are different
 than the ones used by them internally.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent b4059095
......@@ -28,43 +28,53 @@ MODULE_PARM_DESC(cards_dbg, "set debug level (info=1, adv=2 (or-able))");
static struct sms_board sms_boards[] = {
[SMS_BOARD_UNKNOWN] = {
.name = "Unknown board",
.type = SMS_UNKNOWN_TYPE,
.default_mode = DEVICE_MODE_NONE,
},
[SMS1XXX_BOARD_SIANO_STELLAR] = {
.name = "Siano Stellar Digital Receiver",
.type = SMS_STELLAR,
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_SIANO_NOVA_A] = {
.name = "Siano Nova A Digital Receiver",
.type = SMS_NOVA_A0,
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_SIANO_NOVA_B] = {
.name = "Siano Nova B Digital Receiver",
.type = SMS_NOVA_B0,
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_SIANO_VEGA] = {
.name = "Siano Vega Digital Receiver",
.type = SMS_VEGA,
.default_mode = DEVICE_MODE_CMMB,
},
[SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = {
.name = "Hauppauge Catamount",
.type = SMS_STELLAR,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw",
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = {
.name = "Hauppauge Okemo-A",
.type = SMS_NOVA_A0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw",
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = {
.name = "Hauppauge Okemo-B",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.default_mode = DEVICE_MODE_DVBT_BDA,
.rc_codes = RC_MAP_HAUPPAUGE,
.board_cfg.leds_power = 26,
.board_cfg.led0 = 27,
......@@ -78,6 +88,7 @@ static struct sms_board sms_boards[] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = 29,
.board_cfg.foreign_lna0_ctrl = 29,
.rf_switch = 17,
......@@ -87,17 +98,64 @@ static struct sms_board sms_boards[] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = -1,
},
[SMS1XXX_BOARD_SIANO_NICE] = {
/* 11 */
.name = "Siano Nice Digital Receiver",
.type = SMS_NOVA_B0,
.default_mode = DEVICE_MODE_DVBT_BDA,
},
[SMS1XXX_BOARD_SIANO_VENICE] = {
/* 12 */
.name = "Siano Venice Digital Receiver",
.type = SMS_VEGA,
.default_mode = DEVICE_MODE_CMMB,
},
[SMS1XXX_BOARD_SIANO_STELLAR_ROM] = {
.name = "Siano Stellar Digital Receiver ROM",
.type = SMS_STELLAR,
.default_mode = DEVICE_MODE_DVBT_BDA,
.intf_num = 1,
},
[SMS1XXX_BOARD_ZTE_DVB_DATA_CARD] = {
.name = "ZTE Data Card Digital Receiver",
.type = SMS_NOVA_B0,
.default_mode = DEVICE_MODE_DVBT_BDA,
.intf_num = 5,
.mtu = 15792,
},
[SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD] = {
.name = "ONDA Data Card Digital Receiver",
.type = SMS_NOVA_B0,
.default_mode = DEVICE_MODE_DVBT_BDA,
.intf_num = 6,
.mtu = 15792,
},
[SMS1XXX_BOARD_SIANO_MING] = {
.name = "Siano Ming Digital Receiver",
.type = SMS_MING,
.default_mode = DEVICE_MODE_CMMB,
},
[SMS1XXX_BOARD_SIANO_PELE] = {
.name = "Siano Pele Digital Receiver",
.type = SMS_PELE,
.default_mode = DEVICE_MODE_ISDBT_BDA,
},
[SMS1XXX_BOARD_SIANO_RIO] = {
.name = "Siano Rio Digital Receiver",
.type = SMS_RIO,
.default_mode = DEVICE_MODE_ISDBT_BDA,
},
[SMS1XXX_BOARD_SIANO_DENVER_1530] = {
.name = "Siano Denver (ATSC-M/H) Digital Receiver",
.type = SMS_DENVER_1530,
.default_mode = DEVICE_MODE_ATSC,
.crystal = 2400,
},
[SMS1XXX_BOARD_SIANO_DENVER_2160] = {
.name = "Siano Denver (TDMB) Digital Receiver",
.type = SMS_DENVER_2160,
.default_mode = DEVICE_MODE_DAB_TDMB,
},
};
......@@ -119,7 +177,8 @@ static inline void sms_gpio_assign_11xx_default_led_config(
}
int sms_board_event(struct smscore_device_t *coredev,
enum SMS_BOARD_EVENTS gevent) {
enum SMS_BOARD_EVENTS gevent)
{
struct smscore_config_gpio MyGpioConfig;
sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
......
......@@ -37,6 +37,14 @@
#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10
#define SMS1XXX_BOARD_SIANO_NICE 11
#define SMS1XXX_BOARD_SIANO_VENICE 12
#define SMS1XXX_BOARD_SIANO_STELLAR_ROM 13
#define SMS1XXX_BOARD_ZTE_DVB_DATA_CARD 14
#define SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD 15
#define SMS1XXX_BOARD_SIANO_MING 16
#define SMS1XXX_BOARD_SIANO_PELE 17
#define SMS1XXX_BOARD_SIANO_RIO 18
#define SMS1XXX_BOARD_SIANO_DENVER_1530 19
#define SMS1XXX_BOARD_SIANO_DENVER_2160 20
struct sms_board_gpio_cfg {
int lna_vhf_exist;
......
......@@ -61,6 +61,16 @@ static const struct sdio_device_id smssdio_ids[] = {
.driver_data = SMS1XXX_BOARD_SIANO_VEGA},
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE),
.driver_data = SMS1XXX_BOARD_SIANO_VEGA},
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x302),
.driver_data = SMS1XXX_BOARD_SIANO_MING},
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x500),
.driver_data = SMS1XXX_BOARD_SIANO_PELE},
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x600),
.driver_data = SMS1XXX_BOARD_SIANO_RIO},
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x700),
.driver_data = SMS1XXX_BOARD_SIANO_DENVER_2160},
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x800),
.driver_data = SMS1XXX_BOARD_SIANO_DENVER_1530},
{ /* end: all zeroes */ },
};
......
......@@ -441,6 +441,7 @@ static int smsusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
char devpath[32];
int i, rc;
sms_info("interface number %d",
......@@ -485,6 +486,16 @@ static int smsusb_probe(struct usb_interface *intf,
return -ENODEV;
}
if (id->driver_info == SMS1XXX_BOARD_SIANO_STELLAR_ROM) {
sms_info("stellar device was found.");
snprintf(devpath, sizeof(devpath), "usb\\%d-%s",
udev->bus->busnum, udev->devpath);
sms_info("stellar device was found.");
return smsusb1_load_firmware(
udev, smscore_registry_getmode(devpath),
id->driver_info);
}
rc = smsusb_init_device(intf, id->driver_info);
sms_info("rc %d", rc);
sms_board_load_modules(id->driver_info);
......@@ -602,6 +613,26 @@ static const struct usb_device_id smsusb_id_table[] = {
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xf5a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x187f, 0x0202),
.driver_info = SMS1XXX_BOARD_SIANO_NICE },
{ USB_DEVICE(0x187f, 0x0301),
.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
{ USB_DEVICE(0x187f, 0x0302),
.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
{ USB_DEVICE(0x187f, 0x0310),
.driver_info = SMS1XXX_BOARD_SIANO_MING },
{ USB_DEVICE(0x187f, 0x0500),
.driver_info = SMS1XXX_BOARD_SIANO_PELE },
{ USB_DEVICE(0x187f, 0x0600),
.driver_info = SMS1XXX_BOARD_SIANO_RIO },
{ USB_DEVICE(0x187f, 0x0700),
.driver_info = SMS1XXX_BOARD_SIANO_DENVER_2160 },
{ USB_DEVICE(0x187f, 0x0800),
.driver_info = SMS1XXX_BOARD_SIANO_DENVER_1530 },
{ USB_DEVICE(0x19D2, 0x0086),
.driver_info = SMS1XXX_BOARD_ZTE_DVB_DATA_CARD },
{ USB_DEVICE(0x19D2, 0x0078),
.driver_info = SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD },
{ } /* Terminating entry */
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment