ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow

The i2c_7 node (i2c@12CD0000) with LVDS bridge child node was put in
Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing
i2c_7 node.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

arch/arm/boot/dts/exynos5250-snow.dts

@@ -177,30 +177,6 @@ charger {
 		};
 	};
 
-	i2c@12CD0000 {
-		ptn3460: lvds-bridge@20 {
-			compatible = "nxp,ptn3460";
-			reg = <0x20>;
-			powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-			edid-emulation = <5>;
-
-			ports {
-				port@0 {
-					bridge_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-
-				port@1 {
-					bridge_in: endpoint {
-						remote-endpoint = <&dp_out>;
-					};
-				};
-			};
-		};
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
@@ -507,6 +483,28 @@ &i2c_7 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
 
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+
 	max98095: codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;