Commit 34d0302a authored by David Ahern's avatar David Ahern Committed by David S. Miller

selftests: Add ipv6 address bind tests to fcnal-test

Add IPv6 address bind tests to fcnal-test.sh. Verifies socket binding to
local addresses for raw, tcp and udp including device and VRF cases.
Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 75b2b2b3
...@@ -2645,6 +2645,113 @@ ipv6_udp() ...@@ -2645,6 +2645,113 @@ ipv6_udp()
ipv6_udp_vrf ipv6_udp_vrf
} }
################################################################################
# IPv6 address bind
ipv6_addr_bind_novrf()
{
#
# raw socket
#
for a in ${NSA_IP6} ${NSA_LO_IP6}
do
log_start
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
#
# tcp sockets
#
a=${NSA_IP6}
log_start
run_cmd nettest -6 -s -l ${a} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address"
log_start
run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
a=${NSA_LO_IP6}
log_start
show_hint "Should fail with 'Cannot assign requested address'"
run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
}
ipv6_addr_bind_vrf()
{
#
# raw socket
#
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind"
log_start
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
a=${NSA_LO_IP6}
log_start
show_hint "Address on loopback is out of VRF scope"
run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind"
#
# tcp sockets
#
# address on enslaved device is valid for the VRF or device in a VRF
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind"
done
a=${NSA_IP6}
log_start
run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind"
a=${VRF_IP6}
log_start
run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to VRF address with device bind"
a=${NSA_LO_IP6}
log_start
show_hint "Address on loopback out of scope for VRF"
run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
log_start
show_hint "Address on loopback out of scope for device in VRF"
run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
}
ipv6_addr_bind()
{
log_section "IPv6 address binds"
log_subsection "No VRF"
setup
ipv6_addr_bind_novrf
log_subsection "With VRF"
setup "yes"
ipv6_addr_bind_vrf
}
################################################################################ ################################################################################
# usage # usage
...@@ -2666,7 +2773,7 @@ EOF ...@@ -2666,7 +2773,7 @@ EOF
# main # main
TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_addr_bind" TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_addr_bind"
TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp" TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_addr_bind"
PAUSE_ON_FAIL=no PAUSE_ON_FAIL=no
PAUSE=no PAUSE=no
...@@ -2712,6 +2819,7 @@ do ...@@ -2712,6 +2819,7 @@ do
ipv6_ping|ping6) ipv6_ping;; ipv6_ping|ping6) ipv6_ping;;
ipv6_tcp|tcp6) ipv6_tcp;; ipv6_tcp|tcp6) ipv6_tcp;;
ipv6_udp|udp6) ipv6_udp;; ipv6_udp|udp6) ipv6_udp;;
ipv6_bind|bind6) ipv6_addr_bind;;
# setup namespaces and config, but do not run any tests # setup namespaces and config, but do not run any tests
setup) setup; exit 0;; setup) setup; exit 0;;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment