[ARM] Add __iomem annotations to ARM amba drivers.

arch/arm/common/amba.c

@@ -194,7 +194,7 @@ amba_attr(resource, "\t%08lx\t%08lx\t%08lx\n",
 int amba_device_register(struct amba_device *dev, struct resource *parent)
 {
 	u32 pid, cid;
-	void *tmp;
+	void __iomem *tmp;
 	int i, ret;
 
 	dev->dev.release = amba_device_release;

drivers/mmc/mmci.c

@@ -69,7 +69,7 @@ static void mmci_stop_data(struct mmci_host *host)
 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 {
 	unsigned int datactrl, timeout, irqmask;
-	void *base;
+	void __iomem *base;
 
 	DBG(host, "blksz %04x blks %04x flags %08x\n",
 	    1 << data->blksz_bits, data->blocks, data->flags);
@@ -108,7 +108,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 static void
 mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
 {
-	void *base = host->base;
+	void __iomem *base = host->base;
 
 	DBG(host, "op %02x arg %08x flags %08x\n",
 	    cmd->opcode, cmd->arg, cmd->flags);
@@ -169,7 +169,7 @@ static void
 mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	     unsigned int status)
 {
-	void *base = host->base;
+	void __iomem *base = host->base;
 
 	host->cmd = NULL;
 
@@ -193,7 +193,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 
 static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain)
 {
-	void *base = host->base;
+	void __iomem *base = host->base;
 	char *ptr = buffer;
 	u32 status;
 
@@ -222,7 +222,7 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
 
 static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status)
 {
-	void *base = host->base;
+	void __iomem *base = host->base;
 	char *ptr = buffer;
 
 	do {
@@ -251,7 +251,7 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
 static irqreturn_t mmci_pio_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct mmci_host *host = dev_id;
-	void *base = host->base;
+	void __iomem *base = host->base;
 	u32 status;
 
 	status = readl(base + MMCISTATUS);

drivers/mmc/mmci.h

@@ -120,7 +120,7 @@
 struct clk;
 
 struct mmci_host {
-	void			*base;
+	void __iomem		*base;
 	struct mmc_request	*mrq;
 	struct mmc_command	*cmd;
 	struct mmc_data		*data;

drivers/serial/amba-pl011.c

@@ -745,7 +745,7 @@ static struct uart_driver amba_reg = {
 static int pl011_probe(struct amba_device *dev, void *id)
 {
 	struct uart_amba_port *uap;
-	void *base;
+	void __iomem *base;
 	int i, ret;
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)

include/asm-arm/hardware/amba_clcd.h

@@ -141,7 +141,7 @@ struct clcd_fb {
 	struct clcd_panel	*panel;
 	struct clcd_board	*board;
 	void			*board_data;
-	void			*regs;
+	void __iomem		*regs;
 	u32			clcd_cntl;
 	u32			cmap[16];
 };