Merge branches 'depends/pinctrl/devel' and 'depends/rmk/clkdev' into spear/pinctrl

The spear/pinctrl branch has hard dependencies on both the
pinctrl branch and the clkdev branch. We merge those here
to fix it up without having to rebase a branch that has
been pulled into other stable branches already.

Conflicts:
	Documentation/driver-model/devres.txt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt

+* Freescale IOMUX Controller (IOMUXC) for i.MX
+
+The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called ALT modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the IOMUXC controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Freescale IMX pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'mux' selects the function mode(also named mux
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, open drain, drive strength, etc.
+
+Required properties for iomux controller:
+- compatible: "fsl,<soc>-iomuxc"
+  Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid
+  pins and functions of each SoC.
+
+Bits used for CONFIG:
+NO_PAD_CTL(1 << 31): indicate this pin does not need config.
+
+SION(1 << 30): Software Input On Field.
+Force the selected mux mode input path no matter of MUX_MODE functionality.
+By default the input path is determined by functionality of the selected
+mux mode (regular).
+
+Other bits are used for PAD setting.
+Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
+of bits definitions.
+
+NOTE:
+Some requirements for using fsl,imx-pinctrl binding:
+1. We have pin function node defined under iomux controller node to represent
+   what pinmux functions this SoC supports.
+2. The pin configuration node intends to work on a specific function should
+   to be defined under that specific function node.
+   The function node's name should represent well about what function
+   this group of pins in this pin configuration node are working on.
+3. The driver can use the function node's name and pin configuration node's
+   name describe the pin function and group hierarchy.
+   For example, Linux IMX pinctrl driver takes the function node's name
+   as the function name and pin configuration node's name as group name to
+   create the map table.
+4. Each pin configuration node should have a phandle, devices can set pins
+   configurations by referring to the phandle of that pin configuration node.
+
+Examples:
+usdhc@0219c000 { /* uSDHC4 */
+	fsl,card-wired;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_1>;
+};
+
+iomuxc@020e0000 {
+	compatible = "fsl,imx6q-iomuxc";
+	reg = <0x020e0000 0x4000>;
+
+	/* shared pinctrl settings */
+	usdhc4 {
+		pinctrl_usdhc4_1: usdhc4grp-1 {
+			fsl,pins = <1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+				    1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+				    1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+				    1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+				    1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+				    1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+				    1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+				    1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+				    1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+				    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+		};
+	};
+	....
+};
+Refer to the IOMUXC controller chapter in imx6q datasheet,
+0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
+80Ohm driver strength and Fast Slew Rate.
+User should refer to each SoC spec to set the correct value.
+
+TODO: when dtc macro support is available, we can change above raw data
+to dt macro which can get better readability in dts file.

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

+NVIDIA Tegra20 pinmux controller
+
+Required properties:
+- compatible: "nvidia,tegra20-pinmux"
+- reg: Should contain the register physical address and length for each of
+  the tri-state, mux, pull-up/down, and pad control register sets.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Tegra's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, tristate, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function or tristate parameter. For this
+reason, even seemingly boolean values are actually tristates in this binding:
+unspecified, off, or on. Unspecified is represented as an absent property,
+and off/on are represented as integer values 0 and 1.
+
+Required subnode-properties:
+- nvidia,pins : An array of strings. Each string contains the name of a pin or
+    group. Valid values for these names are listed below.
+
+Optional subnode-properties:
+- nvidia,function: A string containing the name of the function to mux to the
+  pin or group. Valid values for function names are listed below. See the Tegra
+  TRM to determine which are valid for each pin or group.
+- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
+    0: none, 1: down, 2: up.
+- nvidia,tristate: Integer.
+    0: drive, 1: tristate.
+- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
+    0: no, 1: yes.
+- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
+    0: no, 1: yes.
+- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
+    most power. Controls the drive power or current. See "Low Power Mode"
+    or "LPMD1" and "LPMD0" in the Tegra TRM.
+- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
+    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
+    Tegra TRM.
+- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
+    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
+    Tegra TRM.
+- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
+    fastest. The range of valid values depends on the pingroup. See
+    "DRVDN_SLWR" in the Tegra TRM.
+- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
+    fastest. The range of valid values depends on the pingroup. See
+    "DRVUP_SLWF" in the Tegra TRM.
+
+Note that many of these properties are only valid for certain specific pins
+or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+details regarding which groups support which functionality. The Linux pinctrl
+driver may also be a useful reference, since it consolidates, disambiguates,
+and corrects data from all those sources.
+
+Valid values for pin and group names are:
+
+  mux groups:
+
+    These all support nvidia,function, nvidia,tristate, and many support
+    nvidia,pull.
+
+    ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
+    ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
+    gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
+    ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
+    ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
+    lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
+    owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
+    spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
+    uca, ucb, uda.
+
+  tristate groups:
+
+    These only support nvidia,pull.
+
+    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
+    ld19_18, ld21_20, ld23_22.
+
+  drive groups:
+
+    With some exceptions, these support nvidia,high-speed-mode,
+    nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
+    nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+
+    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
+    drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
+    drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
+    drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
+    drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
+    drive_uda.
+
+Example:
+
+	pinctrl@70000000 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = < 0x70000014 0x10    /* Tri-state registers */
+			0x70000080 0x20    /* Mux registers */
+			0x700000a0 0x14    /* Pull-up/down registers */
+			0x70000868 0xa8 >; /* Pad control registers */
+	};
+
+Example board file extract:
+
+	pinctrl@70000000 {
+		sdio4_default: sdio4_default {
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	sdhci@c8000600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio4_default>;
+	};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt

+NVIDIA Tegra30 pinmux controller
+
+The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
+as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
+that binding as a baseline, and only documents the differences between the
+two bindings.
+
+Required properties:
+- compatible: "nvidia,tegra30-pinmux"
+- reg: Should contain the register physical address and length for each of
+  the pad control and mux registers.
+
+Tegra30 adds the following optional properties for pin configuration subnodes:
+- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
+- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
+- nvidia,lock: Integer. Lock the pin configuration against further changes
+    until reset. 0: no, 1: yes.
+- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
+
+As with Tegra20, see the Tegra TRM for complete details regarding which groups
+support which functionality.
+
+Valid values for pin and group names are:
+
+  per-pin mux groups:
+
+    These all support nvidia,function, nvidia,tristate, nvidia,pull,
+    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
+    nvidia,io-reset.
+
+    clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
+    dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
+    gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
+    uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
+    lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
+    sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
+    lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
+    lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
+    lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
+    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
+    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
+    gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
+    gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
+    gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
+    gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
+    vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
+    vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
+    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
+    lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+    ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
+    dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
+    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
+    kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
+    kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+    sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
+    pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
+    lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
+    spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
+    spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
+    sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
+    sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
+    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
+    cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
+    clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
+    pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+    pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
+    clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
+    pwr_int_n.
+
+  drive groups:
+
+    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
+    nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
+
+    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
+    dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
+    gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
+    uart3, uda, vi1.
+
+Example:
+
+	pinctrl@70000000 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = < 0x70000868 0xd0     /* Pad control registers */
+			0x70003000 0x3e0 >; /* Mux registers */
+	};
+
+Example board file extract:
+
+	pinctrl@70000000 {
+		sdmmc4_default: pinmux {
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	sdhci@78000400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc4_default>;
+	};

Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

+== Introduction ==
+
+Hardware modules that control pin multiplexing or configuration parameters
+such as pull-up/down, tri-state, drive-strength etc are designated as pin
+controllers. Each pin controller must be represented as a node in device tree,
+just like any other hardware module.
+
+Hardware modules whose signals are affected by pin configuration are
+designated client devices. Again, each client device must be represented as a
+node in device tree, just like any other hardware module.
+
+For a client device to operate correctly, certain pin controllers must
+set up certain specific pin configurations. Some client devices need a
+single static pin configuration, e.g. set up during initialization. Others
+need to reconfigure pins at run-time, for example to tri-state pins when the
+device is inactive. Hence, each client device can define a set of named
+states. The number and names of those states is defined by the client device's
+own binding.
+
+The common pinctrl bindings defined in this file provide an infrastructure
+for client device device tree nodes to map those state names to the pin
+configuration used by those states.
+
+Note that pin controllers themselves may also be client devices of themselves.
+For example, a pin controller may set up its own "active" state when the
+driver loads. This would allow representing a board's static pin configuration
+in a single place, rather than splitting it across multiple client device
+nodes. The decision to do this or not somewhat rests with the author of
+individual board device tree files, and any requirements imposed by the
+bindings for the individual client devices in use by that board, i.e. whether
+they require certain specific named states for dynamic pin configuration.
+
+== Pinctrl client devices ==
+
+For each client device individually, every pin state is assigned an integer
+ID. These numbers start at 0, and are contiguous. For each state ID, a unique
+property exists to define the pin configuration. Each state may also be
+assigned a name. When names are used, another property exists to map from
+those names to the integer IDs.
+
+Each client device's own binding determines the set of states the must be
+defined in its device tree node, and whether to define the set of state
+IDs that must be provided, or whether to define the set of state names that
+must be provided.
+
+Required properties:
+pinctrl-0:	List of phandles, each pointing at a pin configuration
+		node. These referenced pin configuration nodes must be child
+		nodes of the pin controller that they configure. Multiple
+		entries may exist in this list so that multiple pin
+		controllers may be configured, or so that a state may be built
+		from multiple nodes for a single pin controller, each
+		contributing part of the overall configuration. See the next
+		section of this document for details of the format of these
+		pin configuration nodes.
+
+		In some cases, it may be useful to define a state, but for it
+		to be empty. This may be required when a common IP block is
+		used in an SoC either without a pin controller, or where the
+		pin controller does not affect the HW module in question. If
+		the binding for that IP block requires certain pin states to
+		exist, they must still be defined, but may be left empty.
+
+Optional properties:
+pinctrl-1:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+...
+pinctrl-n:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+pinctrl-names:	The list of names to assign states. List entry 0 defines the
+		name for integer state ID 0, list entry 1 for state ID 1, and
+		so on.
+
+For example:
+
+	/* For a client device requiring named states */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+	};
+
+	/* For the same device if using state IDs */
+	device {
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+	};
+
+	/*
+	 * For an IP block whose binding supports pin configuration,
+	 * but in use on an SoC that doesn't have any pin control hardware
+	 */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <>;
+		pinctrl-1 = <>;
+	};
+
+== Pin controller devices ==
+
+Pin controller devices should contain the pin configuration nodes that client
+devices reference.
+
+For example:
+
+	pincontroller {
+		... /* Standard DT properties for the device itself elided */
+
+		state_0_node_a {
+			...
+		};
+		state_1_node_a {
+			...
+		};
+		state_1_node_b {
+			...
+		};
+	}
+
+The contents of each of those pin configuration child nodes is defined
+entirely by the binding for the individual pin controller device. There
+exists no common standard for this content.
+
+The pin configuration nodes need not be direct children of the pin controller
+device; they may be grandchildren, for example. Whether this is legal, and
+whether there is any interaction between the child and intermediate parent
+nodes, is again defined entirely by the binding for the individual pin
+controller device.

Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt

-NVIDIA Tegra 2 pinmux controller
-
-Required properties:
-- compatible : "nvidia,tegra20-pinmux"
-

Documentation/driver-model/devres.txt

@@ -276,3 +276,11 @@ REGULATOR
   devm_regulator_get()
   devm_regulator_put()
   devm_regulator_bulk_get()
+
+CLOCK
+  devm_clk_get()
+  devm_clk_put()
+
+PINCTRL
+  devm_pinctrl_get()
+  devm_pinctrl_put()

Documentation/pinctrl.txt

@@ -152,11 +152,9 @@ static const struct foo_group foo_groups[] = {
 };
 
 
-static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_groups);
 }
 
 static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
@@ -175,7 +173,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 }
 
 static struct pinctrl_ops foo_pctrl_ops = {
-	.list_groups = foo_list_groups,
+	.get_groups_count = foo_get_groups_count,
 	.get_group_name = foo_get_group_name,
 	.get_group_pins = foo_get_group_pins,
 };
@@ -186,13 +184,12 @@ static struct pinctrl_desc foo_desc = {
        .pctlops = &foo_pctrl_ops,
 };
 
-The pin control subsystem will call the .list_groups() function repeatedly
-beginning on 0 until it returns non-zero to determine legal selectors, then
-it will call the other functions to retrieve the name and pins of the group.
-Maintaining the data structure of the groups is up to the driver, this is
-just a simple example - in practice you may need more entries in your group
-structure, for example specific register ranges associated with each group
-and so on.
+The pin control subsystem will call the .get_groups_count() function to
+determine total number of legal selectors, then it will call the other functions
+to retrieve the name and pins of the group. Maintaining the data structure of
+the groups is up to the driver, this is just a simple example - in practice you
+may need more entries in your group structure, for example specific register
+ranges associated with each group and so on.
 
 
 Pin configuration
@@ -606,11 +603,9 @@ static const struct foo_group foo_groups[] = {
 };
 
 
-static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_groups);
 }
 
 static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
@@ -629,7 +624,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 }
 
 static struct pinctrl_ops foo_pctrl_ops = {
-	.list_groups = foo_list_groups,
+	.get_groups_count = foo_get_groups_count,
 	.get_group_name = foo_get_group_name,
 	.get_group_pins = foo_get_group_pins,
 };
@@ -640,7 +635,7 @@ struct foo_pmx_func {
 	const unsigned num_groups;
 };
 
-static const char * const spi0_groups[] = { "spi0_1_grp" };
+static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" };
 static const char * const i2c0_groups[] = { "i2c0_grp" };
 static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp",
 					"mmc0_3_grp" };
@@ -663,11 +658,9 @@ static const struct foo_pmx_func foo_functions[] = {
 	},
 };
 
-int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
+int foo_get_functions_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_functions))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_functions);
 }
 
 const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
@@ -703,7 +696,7 @@ void foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
 }
 
 struct pinmux_ops foo_pmxops = {
-	.list_functions = foo_list_funcs,
+	.get_functions_count = foo_get_functions_count,
 	.get_function_name = foo_get_fname,
 	.get_function_groups = foo_get_groups,
 	.enable = foo_enable,
@@ -786,7 +779,7 @@ and spi on the second function mapping:
 
 #include <linux/pinctrl/machine.h>
 
-static const struct pinctrl_map __initdata mapping[] = {
+static const struct pinctrl_map mapping[] __initconst = {
 	{
 		.dev_name = "foo-spi.0",
 		.name = PINCTRL_STATE_DEFAULT,
@@ -952,13 +945,13 @@ case), we define a mapping like this:
 The result of grabbing this mapping from the device with something like
 this (see next paragraph):
 
-	p = pinctrl_get(dev);
+	p = devm_pinctrl_get(dev);
 	s = pinctrl_lookup_state(p, "8bit");
 	ret = pinctrl_select_state(p, s);
 
 or more simply:
 
-	p = pinctrl_get_select(dev, "8bit");
+	p = devm_pinctrl_get_select(dev, "8bit");
 
 Will be that you activate all the three bottom records in the mapping at
 once. Since they share the same name, pin controller device, function and
@@ -992,7 +985,7 @@ foo_probe()
 	/* Allocate a state holder named "foo" etc */
 	struct foo_state *foo = ...;
 
-	foo->p = pinctrl_get(&device);
+	foo->p = devm_pinctrl_get(&device);
 	if (IS_ERR(foo->p)) {
 		/* FIXME: clean up "foo" here */
 		return PTR_ERR(foo->p);
@@ -1000,24 +993,17 @@ foo_probe()
 
 	foo->s = pinctrl_lookup_state(foo->p, PINCTRL_STATE_DEFAULT);
 	if (IS_ERR(foo->s)) {
-		pinctrl_put(foo->p);
 		/* FIXME: clean up "foo" here */
 		return PTR_ERR(s);
 	}
 
 	ret = pinctrl_select_state(foo->s);
 	if (ret < 0) {
-		pinctrl_put(foo->p);
 		/* FIXME: clean up "foo" here */
 		return ret;
 	}
 }
 
-foo_remove()
-{
-	pinctrl_put(state->p);
-}
-
 This get/lookup/select/put sequence can just as well be handled by bus drivers
 if you don't want each and every driver to handle it and you know the
 arrangement on your bus.
@@ -1029,6 +1015,11 @@ The semantics of the pinctrl APIs are:
   kernel memory to hold the pinmux state. All mapping table parsing or similar
   slow operations take place within this API.
 
+- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put()
+  to be called automatically on the retrieved pointer when the associated
+  device is removed. It is recommended to use this function over plain
+  pinctrl_get().
+
 - pinctrl_lookup_state() is called in process context to obtain a handle to a
   specific state for a the client device. This operation may be slow too.
 
@@ -1041,14 +1032,30 @@ The semantics of the pinctrl APIs are:
 
 - pinctrl_put() frees all information associated with a pinctrl handle.
 
+- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to
+  explicitly destroy a pinctrl object returned by devm_pinctrl_get().
+  However, use of this function will be rare, due to the automatic cleanup
+  that will occur even without calling it.
+
+  pinctrl_get() must be paired with a plain pinctrl_put().
+  pinctrl_get() may not be paired with devm_pinctrl_put().
+  devm_pinctrl_get() can optionally be paired with devm_pinctrl_put().
+  devm_pinctrl_get() may not be paired with plain pinctrl_put().
+
 Usually the pin control core handled the get/put pair and call out to the
 device drivers bookkeeping operations, like checking available functions and
 the associated pins, whereas the enable/disable pass on to the pin controller
 driver which takes care of activating and/or deactivating the mux setting by
 quickly poking some registers.
 
-The pins are allocated for your device when you issue the pinctrl_get() call,
-after this you should be able to see this in the debugfs listing of all pins.
+The pins are allocated for your device when you issue the devm_pinctrl_get()
+call, after this you should be able to see this in the debugfs listing of all
+pins.
+
+NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the
+requested pinctrl handles, for example if the pinctrl driver has not yet
+registered. Thus make sure that the error path in your driver gracefully
+cleans up and is ready to retry the probing later in the startup process.
 
 
 System pin control hogging
@@ -1094,13 +1101,13 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
 
 #include <linux/pinctrl/consumer.h>
 
-foo_switch()
-{
-	struct pinctrl *p;
-	struct pinctrl_state *s1, *s2;
+struct pinctrl *p;
+struct pinctrl_state *s1, *s2;
 
+foo_probe()
+{
 	/* Setup */
-	p = pinctrl_get(&device);
+	p = devm_pinctrl_get(&device);
 	if (IS_ERR(p))
 		...
 
@@ -1111,7 +1118,10 @@ foo_switch()
 	s2 = pinctrl_lookup_state(foo->p, "pos-B");
 	if (IS_ERR(s2))
 		...
+}
 
+foo_switch()
+{
 	/* Enable on position A */
 	ret = pinctrl_select_state(s1);
 	if (ret < 0)
@@ -1125,8 +1135,6 @@ foo_switch()
 	    ...
 
 	...
-
-	pinctrl_put(p);
 }
 
 The above has to be done from process context.

drivers/clk/clkdev.c

@@ -35,7 +35,12 @@ static DEFINE_MUTEX(clocks_mutex);
 static struct clk_lookup *clk_find(const char *dev_id, const char *con_id)
 {
 	struct clk_lookup *p, *cl = NULL;
-	int match, best = 0;
+	int match, best_found = 0, best_possible = 0;
+
+	if (dev_id)
+		best_possible += 2;
+	if (con_id)
+		best_possible += 1;
 
 	list_for_each_entry(p, &clocks, node) {
 		match = 0;
@@ -50,10 +55,10 @@ static struct clk_lookup *clk_find(const char *dev_id, const char *con_id)
 			match += 1;
 		}
 
-		if (match > best) {
+		if (match > best_found) {
 			cl = p;
-			if (match != 3)
-				best = match;
+			if (match != best_possible)
+				best_found = match;
 			else
 				break;
 		}
@@ -89,6 +94,51 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
+static void devm_clk_release(struct device *dev, void *res)
+{
+	clk_put(*(struct clk **)res);
+}
+
+struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+	struct clk **ptr, *clk;
+
+	ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	clk = clk_get(dev, id);
+	if (!IS_ERR(clk)) {
+		*ptr = clk;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return clk;
+}
+EXPORT_SYMBOL(devm_clk_get);
+
+static int devm_clk_match(struct device *dev, void *res, void *data)
+{
+	struct clk **c = res;
+	if (!c || !*c) {
+		WARN_ON(!c || !*c);
+		return 0;
+	}
+	return *c == data;
+}
+
+void devm_clk_put(struct device *dev, struct clk *clk)
+{
+	int ret;
+
+	ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk);
+
+	WARN_ON(ret);
+}
+EXPORT_SYMBOL(devm_clk_put);
+
 void clkdev_add(struct clk_lookup *cl)
 {
 	mutex_lock(&clocks_mutex);
@@ -116,8 +166,9 @@ struct clk_lookup_alloc {
 	char	con_id[MAX_CON_ID];
 };
 
-struct clk_lookup * __init_refok
-clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
+static struct clk_lookup * __init_refok
+vclkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt,
+	va_list ap)
 {
 	struct clk_lookup_alloc *cla;
 
@@ -132,16 +183,25 @@ clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
 	}
 
 	if (dev_fmt) {
-		va_list ap;
-
-		va_start(ap, dev_fmt);
 		vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap);
 		cla->cl.dev_id = cla->dev_id;
-		va_end(ap);
 	}
 
 	return &cla->cl;
 }
+
+struct clk_lookup * __init_refok
+clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
+{
+	struct clk_lookup *cl;
+	va_list ap;
+
+	va_start(ap, dev_fmt);
+	cl = vclkdev_alloc(clk, con_id, dev_fmt, ap);
+	va_end(ap);
+
+	return cl;
+}
 EXPORT_SYMBOL(clkdev_alloc);
 
 int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
@@ -173,3 +233,65 @@ void clkdev_drop(struct clk_lookup *cl)
 	kfree(cl);
 }
 EXPORT_SYMBOL(clkdev_drop);
+
+/**
+ * clk_register_clkdev - register one clock lookup for a struct clk
+ * @clk: struct clk to associate with all clk_lookups
+ * @con_id: connection ID string on device
+ * @dev_id: format string describing device name
+ *
+ * con_id or dev_id may be NULL as a wildcard, just as in the rest of
+ * clkdev.
+ *
+ * To make things easier for mass registration, we detect error clks
+ * from a previous clk_register() call, and return the error code for
+ * those.  This is to permit this function to be called immediately
+ * after clk_register().
+ */
+int clk_register_clkdev(struct clk *clk, const char *con_id,
+	const char *dev_fmt, ...)
+{
+	struct clk_lookup *cl;
+	va_list ap;
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	va_start(ap, dev_fmt);
+	cl = vclkdev_alloc(clk, con_id, dev_fmt, ap);
+	va_end(ap);
+
+	if (!cl)
+		return -ENOMEM;
+
+	clkdev_add(cl);
+
+	return 0;
+}
+
+/**
+ * clk_register_clkdevs - register a set of clk_lookup for a struct clk
+ * @clk: struct clk to associate with all clk_lookups
+ * @cl: array of clk_lookup structures with con_id and dev_id pre-initialized
+ * @num: number of clk_lookup structures to register
+ *
+ * To make things easier for mass registration, we detect error clks
+ * from a previous clk_register() call, and return the error code for
+ * those.  This is to permit this function to be called immediately
+ * after clk_register().
+ */
+int clk_register_clkdevs(struct clk *clk, struct clk_lookup *cl, size_t num)
+{
+	unsigned i;
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	for (i = 0; i < num; i++, cl++) {
+		cl->clk = clk;
+		clkdev_add(cl);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_register_clkdevs);

drivers/of/base.c

@@ -1260,3 +1260,44 @@ int of_alias_get_id(struct device_node *np, const char *stem)
 	return id;
 }
 EXPORT_SYMBOL_GPL(of_alias_get_id);
+
+const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
+			       u32 *pu)
+{
+	const void *curv = cur;
+
+	if (!prop)
+		return NULL;
+
+	if (!cur) {
+		curv = prop->value;
+		goto out_val;
+	}
+
+	curv += sizeof(*cur);
+	if (curv >= prop->value + prop->length)
+		return NULL;
+
+out_val:
+	*pu = be32_to_cpup(curv);
+	return curv;
+}
+EXPORT_SYMBOL_GPL(of_prop_next_u32);
+
+const char *of_prop_next_string(struct property *prop, const char *cur)
+{
+	const void *curv = cur;
+
+	if (!prop)
+		return NULL;
+
+	if (!cur)
+		return prop->value;
+
+	curv += strlen(cur) + 1;
+	if (curv >= prop->value + prop->length)
+		return NULL;
+
+	return curv;
+}
+EXPORT_SYMBOL_GPL(of_prop_next_string);

drivers/pinctrl/Kconfig

@@ -4,7 +4,6 @@
 
 config PINCTRL
 	bool
-	depends on EXPERIMENTAL
 
 if PINCTRL
 
@@ -27,6 +26,19 @@ config DEBUG_PINCTRL
 	help
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
+config PINCTRL_IMX
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_IMX6Q
+	bool "IMX6Q pinctrl driver"
+	depends on OF
+	depends on SOC_IMX6Q
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6q pinctrl driver
+
 config PINCTRL_PXA3xx
 	bool
 	select PINMUX
@@ -37,6 +49,21 @@ config PINCTRL_MMP2
 	select PINCTRL_PXA3xx
 	select PINCONF
 
+config PINCTRL_MXS
+	bool
+
+config PINCTRL_IMX23
+	bool
+	select PINMUX
+	select PINCONF
+	select PINCTRL_MXS
+
+config PINCTRL_IMX28
+	bool
+	select PINMUX
+	select PINCONF
+	select PINCTRL_MXS
+
 config PINCTRL_PXA168
 	bool "PXA168 pin controller driver"
 	depends on ARCH_MMP

drivers/pinctrl/Makefile

@@ -5,9 +5,17 @@ ccflags-$(CONFIG_DEBUG_PINCTRL)	+= -DDEBUG
 obj-$(CONFIG_PINCTRL)		+= core.o
 obj-$(CONFIG_PINMUX)		+= pinmux.o
 obj-$(CONFIG_PINCONF)		+= pinconf.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_PINCTRL)		+= devicetree.o
+endif
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
+obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
+obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_PXA3xx)	+= pinctrl-pxa3xx.o
 obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
+obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
+obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
+obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
 obj-$(CONFIG_PINCTRL_PXA168)	+= pinctrl-pxa168.o
 obj-$(CONFIG_PINCTRL_PXA910)	+= pinctrl-pxa910.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o

drivers/pinctrl/core.h

@@ -52,12 +52,15 @@ struct pinctrl_dev {
  * @dev: the device using this pin control handle
  * @states: a list of states for this device
  * @state: the current state
+ * @dt_maps: the mapping table chunks dynamically parsed from device tree for
+ *	this device, if any
  */
 struct pinctrl {
 	struct list_head node;
 	struct device *dev;
 	struct list_head states;
 	struct pinctrl_state *state;
+	struct list_head dt_maps;
 };
 
 /**
@@ -100,7 +103,8 @@ struct pinctrl_setting_configs {
  * struct pinctrl_setting - an individual mux or config setting
  * @node: list node for struct pinctrl_settings's @settings field
  * @type: the type of setting
- * @pctldev: pin control device handling to be programmed
+ * @pctldev: pin control device handling to be programmed. Not used for
+ *   PIN_MAP_TYPE_DUMMY_STATE.
  * @data: Data specific to the setting type
  */
 struct pinctrl_setting {
@@ -144,6 +148,7 @@ struct pin_desc {
 
 struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name);
 int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
+const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin);
 int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
 			       const char *pin_group);
 
@@ -153,4 +158,9 @@ static inline struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev,
 	return radix_tree_lookup(&pctldev->pin_desc_tree, pin);
 }
 
+int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
+			 bool dup, bool locked);
+void pinctrl_unregister_map(struct pinctrl_map const *map);
+
 extern struct mutex pinctrl_mutex;
+extern struct list_head pinctrldev_list;

drivers/pinctrl/devicetree.c

+/*
+ * Device tree integration for the pin control subsystem
+ *
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "devicetree.h"
+
+/**
+ * struct pinctrl_dt_map - mapping table chunk parsed from device tree
+ * @node: list node for struct pinctrl's @dt_maps field
+ * @pctldev: the pin controller that allocated this struct, and will free it
+ * @maps: the mapping table entries
+ */
+struct pinctrl_dt_map {
+	struct list_head node;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_map *map;
+	unsigned num_maps;
+};
+
+static void dt_free_map(struct pinctrl_dev *pctldev,
+		     struct pinctrl_map *map, unsigned num_maps)
+{
+	if (pctldev) {
+		struct pinctrl_ops *ops = pctldev->desc->pctlops;
+		ops->dt_free_map(pctldev, map, num_maps);
+	} else {
+		/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
+		kfree(map);
+	}
+}
+
+void pinctrl_dt_free_maps(struct pinctrl *p)
+{
+	struct pinctrl_dt_map *dt_map, *n1;
+
+	list_for_each_entry_safe(dt_map, n1, &p->dt_maps, node) {
+		pinctrl_unregister_map(dt_map->map);
+		list_del(&dt_map->node);
+		dt_free_map(dt_map->pctldev, dt_map->map,
+			    dt_map->num_maps);
+		kfree(dt_map);
+	}
+
+	of_node_put(p->dev->of_node);
+}
+
+static int dt_remember_or_free_map(struct pinctrl *p, const char *statename,
+				   struct pinctrl_dev *pctldev,
+				   struct pinctrl_map *map, unsigned num_maps)
+{
+	int i;
+	struct pinctrl_dt_map *dt_map;
+
+	/* Initialize common mapping table entry fields */
+	for (i = 0; i < num_maps; i++) {
+		map[i].dev_name = dev_name(p->dev);
+		map[i].name = statename;
+		if (pctldev)
+			map[i].ctrl_dev_name = dev_name(pctldev->dev);
+	}
+
+	/* Remember the converted mapping table entries */
+	dt_map = kzalloc(sizeof(*dt_map), GFP_KERNEL);
+	if (!dt_map) {
+		dev_err(p->dev, "failed to alloc struct pinctrl_dt_map\n");
+		dt_free_map(pctldev, map, num_maps);
+		return -ENOMEM;
+	}
+
+	dt_map->pctldev = pctldev;
+	dt_map->map = map;
+	dt_map->num_maps = num_maps;
+	list_add_tail(&dt_map->node, &p->dt_maps);
+
+	return pinctrl_register_map(map, num_maps, false, true);
+}
+
+static struct pinctrl_dev *find_pinctrl_by_of_node(struct device_node *np)
+{
+	struct pinctrl_dev *pctldev;
+
+	list_for_each_entry(pctldev, &pinctrldev_list, node)
+		if (pctldev->dev->of_node == np)
+			return pctldev;
+
+	return NULL;
+}
+
+static int dt_to_map_one_config(struct pinctrl *p, const char *statename,
+				struct device_node *np_config)
+{
+	struct device_node *np_pctldev;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_ops *ops;
+	int ret;
+	struct pinctrl_map *map;
+	unsigned num_maps;
+
+	/* Find the pin controller containing np_config */
+	np_pctldev = of_node_get(np_config);
+	for (;;) {
+		np_pctldev = of_get_next_parent(np_pctldev);
+		if (!np_pctldev || of_node_is_root(np_pctldev)) {
+			dev_info(p->dev, "could not find pctldev for node %s, deferring probe\n",
+				np_config->full_name);
+			of_node_put(np_pctldev);
+			/* OK let's just assume this will appear later then */
+			return -EPROBE_DEFER;
+		}
+		pctldev = find_pinctrl_by_of_node(np_pctldev);
+		if (pctldev)
+			break;
+	}
+	of_node_put(np_pctldev);
+
+	/*
+	 * Call pinctrl driver to parse device tree node, and
+	 * generate mapping table entries
+	 */
+	ops = pctldev->desc->pctlops;
+	if (!ops->dt_node_to_map) {
+		dev_err(p->dev, "pctldev %s doesn't support DT\n",
+			dev_name(pctldev->dev));
+		return -ENODEV;
+	}
+	ret = ops->dt_node_to_map(pctldev, np_config, &map, &num_maps);
+	if (ret < 0)
+		return ret;
+
+	/* Stash the mapping table chunk away for later use */
+	return dt_remember_or_free_map(p, statename, pctldev, map, num_maps);
+}
+
+static int dt_remember_dummy_state(struct pinctrl *p, const char *statename)
+{
+	struct pinctrl_map *map;
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map) {
+		dev_err(p->dev, "failed to alloc struct pinctrl_map\n");
+		return -ENOMEM;
+	}
+
+	/* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
+	map->type = PIN_MAP_TYPE_DUMMY_STATE;
+
+	return dt_remember_or_free_map(p, statename, NULL, map, 1);
+}
+
+int pinctrl_dt_to_map(struct pinctrl *p)
+{
+	struct device_node *np = p->dev->of_node;
+	int state, ret;
+	char *propname;
+	struct property *prop;
+	const char *statename;
+	const __be32 *list;
+	int size, config;
+	phandle phandle;
+	struct device_node *np_config;
+
+	/* CONFIG_OF enabled, p->dev not instantiated from DT */
+	if (!np) {
+		dev_dbg(p->dev, "no of_node; not parsing pinctrl DT\n");
+		return 0;
+	}
+
+	/* We may store pointers to property names within the node */
+	of_node_get(np);
+
+	/* For each defined state ID */
+	for (state = 0; ; state++) {
+		/* Retrieve the pinctrl-* property */
+		propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state);
+		prop = of_find_property(np, propname, &size);
+		kfree(propname);
+		if (!prop)
+			break;
+		list = prop->value;
+		size /= sizeof(*list);
+
+		/* Determine whether pinctrl-names property names the state */
+		ret = of_property_read_string_index(np, "pinctrl-names",
+						    state, &statename);
+		/*
+		 * If not, statename is just the integer state ID. But rather
+		 * than dynamically allocate it and have to free it later,
+		 * just point part way into the property name for the string.
+		 */
+		if (ret < 0) {
+			/* strlen("pinctrl-") == 8 */
+			statename = prop->name + 8;
+		}
+
+		/* For every referenced pin configuration node in it */
+		for (config = 0; config < size; config++) {
+			phandle = be32_to_cpup(list++);
+
+			/* Look up the pin configuration node */
+			np_config = of_find_node_by_phandle(phandle);
+			if (!np_config) {
+				dev_err(p->dev,
+					"prop %s index %i invalid phandle\n",
+					prop->name, config);
+				ret = -EINVAL;
+				goto err;
+			}
+
+			/* Parse the node */
+			ret = dt_to_map_one_config(p, statename, np_config);
+			of_node_put(np_config);
+			if (ret < 0)
+				goto err;
+		}
+
+		/* No entries in DT? Generate a dummy state table entry */
+		if (!size) {
+			ret = dt_remember_dummy_state(p, statename);
+			if (ret < 0)
+				goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	pinctrl_dt_free_maps(p);
+	return ret;
+}

drivers/pinctrl/devicetree.h

+/*
+ * Internal interface to pinctrl device tree integration
+ *
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef CONFIG_OF
+
+void pinctrl_dt_free_maps(struct pinctrl *p);
+int pinctrl_dt_to_map(struct pinctrl *p);
+
+#else
+
+static inline int pinctrl_dt_to_map(struct pinctrl *p)
+{
+	return 0;
+}
+
+static inline void pinctrl_dt_free_maps(struct pinctrl *p)
+{
+}
+
+#endif

drivers/pinctrl/pinconf.c

@@ -28,11 +28,17 @@ int pinconf_check_ops(struct pinctrl_dev *pctldev)
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* We must be able to read out pin status */
-	if (!ops->pin_config_get && !ops->pin_config_group_get)
+	if (!ops->pin_config_get && !ops->pin_config_group_get) {
+		dev_err(pctldev->dev,
+			"pinconf must be able to read out pin status\n");
 		return -EINVAL;
+	}
 	/* We have to be able to config the pins in SOME way */
-	if (!ops->pin_config_set && !ops->pin_config_group_set)
+	if (!ops->pin_config_set && !ops->pin_config_group_set) {
+		dev_err(pctldev->dev,
+			"pinconf has to be able to set a pins config\n");
 		return -EINVAL;
+	}
 	return 0;
 }
 
@@ -379,8 +385,16 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting)
 
 void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map)
 {
+	struct pinctrl_dev *pctldev;
+	const struct pinconf_ops *confops;
 	int i;
 
+	pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name);
+	if (pctldev)
+		confops = pctldev->desc->confops;
+	else
+		confops = NULL;
+
 	switch (map->type) {
 	case PIN_MAP_TYPE_CONFIGS_PIN:
 		seq_printf(s, "pin ");
@@ -394,8 +408,15 @@ void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map)
 
 	seq_printf(s, "%s\n", map->data.configs.group_or_pin);
 
-	for (i = 0; i < map->data.configs.num_configs; i++)
-		seq_printf(s, "config %08lx\n", map->data.configs.configs[i]);
+	for (i = 0; i < map->data.configs.num_configs; i++) {
+		seq_printf(s, "config ");
+		if (confops && confops->pin_config_config_dbg_show)
+			confops->pin_config_config_dbg_show(pctldev, s,
+						map->data.configs.configs[i]);
+		else
+			seq_printf(s, "%08lx", map->data.configs.configs[i]);
+		seq_printf(s, "\n");
+	}
 }
 
 void pinconf_show_setting(struct seq_file *s,
@@ -403,6 +424,7 @@ void pinconf_show_setting(struct seq_file *s,
 {
 	struct pinctrl_dev *pctldev = setting->pctldev;
 	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+	const struct pinconf_ops *confops = pctldev->desc->confops;
 	struct pin_desc *desc;
 	int i;
 
@@ -428,8 +450,15 @@ void pinconf_show_setting(struct seq_file *s,
 	 * FIXME: We should really get the pin controler to dump the config
 	 * values, so they can be decoded to something meaningful.
 	 */
-	for (i = 0; i < setting->data.configs.num_configs; i++)
-		seq_printf(s, " %08lx", setting->data.configs.configs[i]);
+	for (i = 0; i < setting->data.configs.num_configs; i++) {
+		seq_printf(s, " ");
+		if (confops && confops->pin_config_config_dbg_show)
+			confops->pin_config_config_dbg_show(pctldev, s,
+				setting->data.configs.configs[i]);
+		else
+			seq_printf(s, "%08lx",
+				   setting->data.configs.configs[i]);
+	}
 
 	seq_printf(s, "\n");
 }
@@ -448,10 +477,14 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
 static int pinconf_pins_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
+	const struct pinconf_ops *ops = pctldev->desc->confops;
 	unsigned i, pin;
 
+	if (!ops || !ops->pin_config_get)
+		return 0;
+
 	seq_puts(s, "Pin config settings per pin\n");
-	seq_puts(s, "Format: pin (name): pinmux setting array\n");
+	seq_puts(s, "Format: pin (name): configs\n");
 
 	mutex_lock(&pinctrl_mutex);
 
@@ -495,17 +528,18 @@ static int pinconf_groups_show(struct seq_file *s, void *what)
 	struct pinctrl_dev *pctldev = s->private;
 	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
 	const struct pinconf_ops *ops = pctldev->desc->confops;
+	unsigned ngroups = pctlops->get_groups_count(pctldev);
 	unsigned selector = 0;
 
 	if (!ops || !ops->pin_config_group_get)
 		return 0;
 
 	seq_puts(s, "Pin config settings per pin group\n");
-	seq_puts(s, "Format: group (name): pinmux setting array\n");
+	seq_puts(s, "Format: group (name): configs\n");
 
 	mutex_lock(&pinctrl_mutex);
 
-	while (pctlops->list_groups(pctldev, selector) >= 0) {
+	while (selector < ngroups) {
 		const char *gname = pctlops->get_group_name(pctldev, selector);
 
 		seq_printf(s, "%u (%s):", selector, gname);

drivers/pinctrl/pinconf.h

@@ -19,11 +19,6 @@ int pinconf_map_to_setting(struct pinctrl_map const *map,
 			  struct pinctrl_setting *setting);
 void pinconf_free_setting(struct pinctrl_setting const *setting);
 int pinconf_apply_setting(struct pinctrl_setting const *setting);
-void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map);
-void pinconf_show_setting(struct seq_file *s,
-			  struct pinctrl_setting const *setting);
-void pinconf_init_device_debugfs(struct dentry *devroot,
-				 struct pinctrl_dev *pctldev);
 
 /*
  * You will only be interested in these if you're using PINCONF
@@ -61,6 +56,18 @@ static inline int pinconf_apply_setting(struct pinctrl_setting const *setting)
 	return 0;
 }
 
+#endif
+
+#if defined(CONFIG_PINCONF) && defined(CONFIG_DEBUG_FS)
+
+void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map);
+void pinconf_show_setting(struct seq_file *s,
+			  struct pinctrl_setting const *setting);
+void pinconf_init_device_debugfs(struct dentry *devroot,
+				 struct pinctrl_dev *pctldev);
+
+#else
+
 static inline void pinconf_show_map(struct seq_file *s,
 				    struct pinctrl_map const *map)
 {

drivers/pinctrl/pinctrl-coh901.c

@@ -174,7 +174,7 @@ struct u300_gpio_confdata {
 
 
 /* Initial configuration */
-static const struct __initdata u300_gpio_confdata
+static const struct __initconst u300_gpio_confdata
 bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
@@ -255,7 +255,7 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	}
 };
 
-static const struct __initdata u300_gpio_confdata
+static const struct __initconst u300_gpio_confdata
 bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{

drivers/pinctrl/pinctrl-imx.h

+/*
+ * IMX pinmux core definitions
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro Ltd.
+ *
+ * Author: Dong Aisheng <dong.aisheng@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DRIVERS_PINCTRL_IMX_H
+#define __DRIVERS_PINCTRL_IMX_H
+
+struct platform_device;
+
+/**
+ * struct imx_pin_group - describes an IMX pin group
+ * @name: the name of this specific pin group
+ * @pins: an array of discrete physical pins used in this group, taken
+ *	from the driver-local pin enumeration space
+ * @npins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ * @mux_mode: the mux mode for each pin in this group. The size of this
+ *	array is the same as pins.
+ * @configs: the config for each pin in this group. The size of this
+ *	array is the same as pins.
+ */
+struct imx_pin_group {
+	const char *name;
+	unsigned int *pins;
+	unsigned npins;
+	unsigned int *mux_mode;
+	unsigned long *configs;
+};
+
+/**
+ * struct imx_pmx_func - describes IMX pinmux functions
+ * @name: the name of this specific function
+ * @groups: corresponding pin groups
+ * @num_groups: the number of groups
+ */
+struct imx_pmx_func {
+	const char *name;
+	const char **groups;
+	unsigned num_groups;
+};
+
+/**
+ * struct imx_pin_reg - describe a pin reg map
+ * The last 3 members are used for select input setting
+ * @pid: pin id
+ * @mux_reg: mux register offset
+ * @conf_reg: config register offset
+ * @mux_mode: mux mode
+ * @input_reg: select input register offset for this mux if any
+ *  0 if no select input setting needed.
+ * @input_val: the value set to select input register
+ */
+struct imx_pin_reg {
+	u16 pid;
+	u16 mux_reg;
+	u16 conf_reg;
+	u8 mux_mode;
+	u16 input_reg;
+	u8 input_val;
+};
+
+struct imx_pinctrl_soc_info {
+	struct device *dev;
+	const struct pinctrl_pin_desc *pins;
+	unsigned int npins;
+	const struct imx_pin_reg *pin_regs;
+	unsigned int npin_regs;
+	struct imx_pin_group *groups;
+	unsigned int ngroups;
+	struct imx_pmx_func *functions;
+	unsigned int nfunctions;
+};
+
+#define NO_MUX		0x0
+#define NO_PAD		0x0
+
+#define IMX_PIN_REG(id, conf, mux, mode, input, val)	\
+	{						\
+		.pid = id,				\
+		.conf_reg = conf,			\
+		.mux_reg = mux,				\
+		.mux_mode  = mode,			\
+		.input_reg = input,			\
+		.input_val = val,			\
+	}
+
+#define IMX_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
+
+#define PAD_CTL_MASK(len)	((1 << len) - 1)
+#define IMX_MUX_MASK	0x7
+#define IOMUXC_CONFIG_SION	(0x1 << 4)
+
+int imx_pinctrl_probe(struct platform_device *pdev,
+			struct imx_pinctrl_soc_info *info);
+int imx_pinctrl_remove(struct platform_device *pdev);
+#endif /* __DRIVERS_PINCTRL_IMX_H */

drivers/pinctrl/pinctrl-imx23.c

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-mxs.h"
+
+enum imx23_pin_enum {
+	GPMI_D00	= PINID(0, 0),
+	GPMI_D01	= PINID(0, 1),
+	GPMI_D02	= PINID(0, 2),
+	GPMI_D03	= PINID(0, 3),
+	GPMI_D04	= PINID(0, 4),
+	GPMI_D05	= PINID(0, 5),
+	GPMI_D06	= PINID(0, 6),
+	GPMI_D07	= PINID(0, 7),
+	GPMI_D08	= PINID(0, 8),
+	GPMI_D09	= PINID(0, 9),
+	GPMI_D10	= PINID(0, 10),
+	GPMI_D11	= PINID(0, 11),
+	GPMI_D12	= PINID(0, 12),
+	GPMI_D13	= PINID(0, 13),
+	GPMI_D14	= PINID(0, 14),
+	GPMI_D15	= PINID(0, 15),
+	GPMI_CLE	= PINID(0, 16),
+	GPMI_ALE	= PINID(0, 17),
+	GPMI_CE2N	= PINID(0, 18),
+	GPMI_RDY0	= PINID(0, 19),
+	GPMI_RDY1	= PINID(0, 20),
+	GPMI_RDY2	= PINID(0, 21),
+	GPMI_RDY3	= PINID(0, 22),
+	GPMI_WPN	= PINID(0, 23),
+	GPMI_WRN	= PINID(0, 24),
+	GPMI_RDN	= PINID(0, 25),
+	AUART1_CTS	= PINID(0, 26),
+	AUART1_RTS	= PINID(0, 27),
+	AUART1_RX	= PINID(0, 28),
+	AUART1_TX	= PINID(0, 29),
+	I2C_SCL		= PINID(0, 30),
+	I2C_SDA		= PINID(0, 31),
+	LCD_D00		= PINID(1, 0),
+	LCD_D01		= PINID(1, 1),
+	LCD_D02		= PINID(1, 2),
+	LCD_D03		= PINID(1, 3),
+	LCD_D04		= PINID(1, 4),
+	LCD_D05		= PINID(1, 5),
+	LCD_D06		= PINID(1, 6),
+	LCD_D07		= PINID(1, 7),
+	LCD_D08		= PINID(1, 8),
+	LCD_D09		= PINID(1, 9),
+	LCD_D10		= PINID(1, 10),
+	LCD_D11		= PINID(1, 11),
+	LCD_D12		= PINID(1, 12),
+	LCD_D13		= PINID(1, 13),
+	LCD_D14		= PINID(1, 14),
+	LCD_D15		= PINID(1, 15),
+	LCD_D16		= PINID(1, 16),
+	LCD_D17		= PINID(1, 17),
+	LCD_RESET	= PINID(1, 18),
+	LCD_RS		= PINID(1, 19),
+	LCD_WR		= PINID(1, 20),
+	LCD_CS		= PINID(1, 21),
+	LCD_DOTCK	= PINID(1, 22),
+	LCD_ENABLE	= PINID(1, 23),
+	LCD_HSYNC	= PINID(1, 24),
+	LCD_VSYNC	= PINID(1, 25),
+	PWM0		= PINID(1, 26),
+	PWM1		= PINID(1, 27),
+	PWM2		= PINID(1, 28),
+	PWM3		= PINID(1, 29),
+	PWM4		= PINID(1, 30),
+	SSP1_CMD	= PINID(2, 0),
+	SSP1_DETECT	= PINID(2, 1),
+	SSP1_DATA0	= PINID(2, 2),
+	SSP1_DATA1	= PINID(2, 3),
+	SSP1_DATA2	= PINID(2, 4),
+	SSP1_DATA3	= PINID(2, 5),
+	SSP1_SCK	= PINID(2, 6),
+	ROTARYA		= PINID(2, 7),
+	ROTARYB		= PINID(2, 8),
+	EMI_A00		= PINID(2, 9),
+	EMI_A01		= PINID(2, 10),
+	EMI_A02		= PINID(2, 11),
+	EMI_A03		= PINID(2, 12),
+	EMI_A04		= PINID(2, 13),
+	EMI_A05		= PINID(2, 14),
+	EMI_A06		= PINID(2, 15),
+	EMI_A07		= PINID(2, 16),
+	EMI_A08		= PINID(2, 17),
+	EMI_A09		= PINID(2, 18),
+	EMI_A10		= PINID(2, 19),
+	EMI_A11		= PINID(2, 20),
+	EMI_A12		= PINID(2, 21),
+	EMI_BA0		= PINID(2, 22),
+	EMI_BA1		= PINID(2, 23),
+	EMI_CASN	= PINID(2, 24),
+	EMI_CE0N	= PINID(2, 25),
+	EMI_CE1N	= PINID(2, 26),
+	GPMI_CE1N	= PINID(2, 27),
+	GPMI_CE0N	= PINID(2, 28),
+	EMI_CKE		= PINID(2, 29),
+	EMI_RASN	= PINID(2, 30),
+	EMI_WEN		= PINID(2, 31),
+	EMI_D00		= PINID(3, 0),
+	EMI_D01		= PINID(3, 1),
+	EMI_D02		= PINID(3, 2),
+	EMI_D03		= PINID(3, 3),
+	EMI_D04		= PINID(3, 4),
+	EMI_D05		= PINID(3, 5),
+	EMI_D06		= PINID(3, 6),
+	EMI_D07		= PINID(3, 7),
+	EMI_D08		= PINID(3, 8),
+	EMI_D09		= PINID(3, 9),
+	EMI_D10		= PINID(3, 10),
+	EMI_D11		= PINID(3, 11),
+	EMI_D12		= PINID(3, 12),
+	EMI_D13		= PINID(3, 13),
+	EMI_D14		= PINID(3, 14),
+	EMI_D15		= PINID(3, 15),
+	EMI_DQM0	= PINID(3, 16),
+	EMI_DQM1	= PINID(3, 17),
+	EMI_DQS0	= PINID(3, 18),
+	EMI_DQS1	= PINID(3, 19),
+	EMI_CLK		= PINID(3, 20),
+	EMI_CLKN	= PINID(3, 21),
+};
+
+static const struct pinctrl_pin_desc imx23_pins[] = {
+	MXS_PINCTRL_PIN(GPMI_D00),
+	MXS_PINCTRL_PIN(GPMI_D01),
+	MXS_PINCTRL_PIN(GPMI_D02),
+	MXS_PINCTRL_PIN(GPMI_D03),
+	MXS_PINCTRL_PIN(GPMI_D04),
+	MXS_PINCTRL_PIN(GPMI_D05),
+	MXS_PINCTRL_PIN(GPMI_D06),
+	MXS_PINCTRL_PIN(GPMI_D07),
+	MXS_PINCTRL_PIN(GPMI_D08),
+	MXS_PINCTRL_PIN(GPMI_D09),
+	MXS_PINCTRL_PIN(GPMI_D10),
+	MXS_PINCTRL_PIN(GPMI_D11),
+	MXS_PINCTRL_PIN(GPMI_D12),
+	MXS_PINCTRL_PIN(GPMI_D13),
+	MXS_PINCTRL_PIN(GPMI_D14),
+	MXS_PINCTRL_PIN(GPMI_D15),
+	MXS_PINCTRL_PIN(GPMI_CLE),
+	MXS_PINCTRL_PIN(GPMI_ALE),
+	MXS_PINCTRL_PIN(GPMI_CE2N),
+	MXS_PINCTRL_PIN(GPMI_RDY0),
+	MXS_PINCTRL_PIN(GPMI_RDY1),
+	MXS_PINCTRL_PIN(GPMI_RDY2),
+	MXS_PINCTRL_PIN(GPMI_RDY3),
+	MXS_PINCTRL_PIN(GPMI_WPN),
+	MXS_PINCTRL_PIN(GPMI_WRN),
+	MXS_PINCTRL_PIN(GPMI_RDN),
+	MXS_PINCTRL_PIN(AUART1_CTS),
+	MXS_PINCTRL_PIN(AUART1_RTS),
+	MXS_PINCTRL_PIN(AUART1_RX),
+	MXS_PINCTRL_PIN(AUART1_TX),
+	MXS_PINCTRL_PIN(I2C_SCL),
+	MXS_PINCTRL_PIN(I2C_SDA),
+	MXS_PINCTRL_PIN(LCD_D00),
+	MXS_PINCTRL_PIN(LCD_D01),
+	MXS_PINCTRL_PIN(LCD_D02),
+	MXS_PINCTRL_PIN(LCD_D03),
+	MXS_PINCTRL_PIN(LCD_D04),
+	MXS_PINCTRL_PIN(LCD_D05),
+	MXS_PINCTRL_PIN(LCD_D06),
+	MXS_PINCTRL_PIN(LCD_D07),
+	MXS_PINCTRL_PIN(LCD_D08),
+	MXS_PINCTRL_PIN(LCD_D09),
+	MXS_PINCTRL_PIN(LCD_D10),
+	MXS_PINCTRL_PIN(LCD_D11),
+	MXS_PINCTRL_PIN(LCD_D12),
+	MXS_PINCTRL_PIN(LCD_D13),
+	MXS_PINCTRL_PIN(LCD_D14),
+	MXS_PINCTRL_PIN(LCD_D15),
+	MXS_PINCTRL_PIN(LCD_D16),
+	MXS_PINCTRL_PIN(LCD_D17),
+	MXS_PINCTRL_PIN(LCD_RESET),
+	MXS_PINCTRL_PIN(LCD_RS),
+	MXS_PINCTRL_PIN(LCD_WR),
+	MXS_PINCTRL_PIN(LCD_CS),
+	MXS_PINCTRL_PIN(LCD_DOTCK),
+	MXS_PINCTRL_PIN(LCD_ENABLE),
+	MXS_PINCTRL_PIN(LCD_HSYNC),
+	MXS_PINCTRL_PIN(LCD_VSYNC),
+	MXS_PINCTRL_PIN(PWM0),
+	MXS_PINCTRL_PIN(PWM1),
+	MXS_PINCTRL_PIN(PWM2),
+	MXS_PINCTRL_PIN(PWM3),
+	MXS_PINCTRL_PIN(PWM4),
+	MXS_PINCTRL_PIN(SSP1_CMD),
+	MXS_PINCTRL_PIN(SSP1_DETECT),
+	MXS_PINCTRL_PIN(SSP1_DATA0),
+	MXS_PINCTRL_PIN(SSP1_DATA1),
+	MXS_PINCTRL_PIN(SSP1_DATA2),
+	MXS_PINCTRL_PIN(SSP1_DATA3),
+	MXS_PINCTRL_PIN(SSP1_SCK),
+	MXS_PINCTRL_PIN(ROTARYA),
+	MXS_PINCTRL_PIN(ROTARYB),
+	MXS_PINCTRL_PIN(EMI_A00),
+	MXS_PINCTRL_PIN(EMI_A01),
+	MXS_PINCTRL_PIN(EMI_A02),
+	MXS_PINCTRL_PIN(EMI_A03),
+	MXS_PINCTRL_PIN(EMI_A04),
+	MXS_PINCTRL_PIN(EMI_A05),
+	MXS_PINCTRL_PIN(EMI_A06),
+	MXS_PINCTRL_PIN(EMI_A07),
+	MXS_PINCTRL_PIN(EMI_A08),
+	MXS_PINCTRL_PIN(EMI_A09),
+	MXS_PINCTRL_PIN(EMI_A10),
+	MXS_PINCTRL_PIN(EMI_A11),
+	MXS_PINCTRL_PIN(EMI_A12),
+	MXS_PINCTRL_PIN(EMI_BA0),
+	MXS_PINCTRL_PIN(EMI_BA1),
+	MXS_PINCTRL_PIN(EMI_CASN),
+	MXS_PINCTRL_PIN(EMI_CE0N),
+	MXS_PINCTRL_PIN(EMI_CE1N),
+	MXS_PINCTRL_PIN(GPMI_CE1N),
+	MXS_PINCTRL_PIN(GPMI_CE0N),
+	MXS_PINCTRL_PIN(EMI_CKE),
+	MXS_PINCTRL_PIN(EMI_RASN),
+	MXS_PINCTRL_PIN(EMI_WEN),
+	MXS_PINCTRL_PIN(EMI_D00),
+	MXS_PINCTRL_PIN(EMI_D01),
+	MXS_PINCTRL_PIN(EMI_D02),
+	MXS_PINCTRL_PIN(EMI_D03),
+	MXS_PINCTRL_PIN(EMI_D04),
+	MXS_PINCTRL_PIN(EMI_D05),
+	MXS_PINCTRL_PIN(EMI_D06),
+	MXS_PINCTRL_PIN(EMI_D07),
+	MXS_PINCTRL_PIN(EMI_D08),
+	MXS_PINCTRL_PIN(EMI_D09),
+	MXS_PINCTRL_PIN(EMI_D10),
+	MXS_PINCTRL_PIN(EMI_D11),
+	MXS_PINCTRL_PIN(EMI_D12),
+	MXS_PINCTRL_PIN(EMI_D13),
+	MXS_PINCTRL_PIN(EMI_D14),
+	MXS_PINCTRL_PIN(EMI_D15),
+	MXS_PINCTRL_PIN(EMI_DQM0),
+	MXS_PINCTRL_PIN(EMI_DQM1),
+	MXS_PINCTRL_PIN(EMI_DQS0),
+	MXS_PINCTRL_PIN(EMI_DQS1),
+	MXS_PINCTRL_PIN(EMI_CLK),
+	MXS_PINCTRL_PIN(EMI_CLKN),
+};
+
+static struct mxs_regs imx23_regs = {
+	.muxsel = 0x100,
+	.drive = 0x200,
+	.pull = 0x400,
+};
+
+static struct mxs_pinctrl_soc_data imx23_pinctrl_data = {
+	.regs = &imx23_regs,
+	.pins = imx23_pins,
+	.npins = ARRAY_SIZE(imx23_pins),
+};
+
+static int __devinit imx23_pinctrl_probe(struct platform_device *pdev)
+{
+	return mxs_pinctrl_probe(pdev, &imx23_pinctrl_data);
+}
+
+static struct of_device_id imx23_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "fsl,imx23-pinctrl", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx23_pinctrl_of_match);
+
+static struct platform_driver imx23_pinctrl_driver = {
+	.driver = {
+		.name = "imx23-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = imx23_pinctrl_of_match,
+	},
+	.probe = imx23_pinctrl_probe,
+	.remove = __devexit_p(mxs_pinctrl_remove),
+};
+
+static int __init imx23_pinctrl_init(void)
+{
+	return platform_driver_register(&imx23_pinctrl_driver);
+}
+arch_initcall(imx23_pinctrl_init);
+
+static void __exit imx23_pinctrl_exit(void)
+{
+	platform_driver_unregister(&imx23_pinctrl_driver);
+}
+module_exit(imx23_pinctrl_exit);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX23 pinctrl driver");
+MODULE_LICENSE("GPL v2");

drivers/pinctrl/pinctrl-mxs.h

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __PINCTRL_MXS_H
+#define __PINCTRL_MXS_H
+
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#define SET	0x4
+#define CLR	0x8
+#define TOG	0xc
+
+#define MXS_PINCTRL_PIN(pin)	PINCTRL_PIN(pin, #pin)
+#define PINID(bank, pin)	((bank) * 32 + (pin))
+
+/*
+ * pinmux-id bit field definitions
+ *
+ * bank:	15..12	(4)
+ * pin:		11..4	(8)
+ * muxsel:	3..0	(4)
+ */
+#define MUXID_TO_PINID(m)	PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
+#define MUXID_TO_MUXSEL(m)	((m) & 0xf)
+
+#define PINID_TO_BANK(p)	((p) >> 5)
+#define PINID_TO_PIN(p)		((p) % 32)
+
+/*
+ * pin config bit field definitions
+ *
+ * pull-up:	6..5	(2)
+ * voltage:	4..3	(2)
+ * mA:		2..0	(3)
+ *
+ * MSB of each field is presence bit for the config.
+ */
+#define PULL_PRESENT		(1 << 6)
+#define PULL_SHIFT		5
+#define VOL_PRESENT		(1 << 4)
+#define VOL_SHIFT		3
+#define MA_PRESENT		(1 << 2)
+#define MA_SHIFT		0
+#define CONFIG_TO_PULL(c)	((c) >> PULL_SHIFT & 0x1)
+#define CONFIG_TO_VOL(c)	((c) >> VOL_SHIFT & 0x1)
+#define CONFIG_TO_MA(c)		((c) >> MA_SHIFT & 0x3)
+
+struct mxs_function {
+	const char *name;
+	const char **groups;
+	unsigned ngroups;
+};
+
+struct mxs_group {
+	const char *name;
+	unsigned int *pins;
+	unsigned npins;
+	u8 *muxsel;
+	u8 config;
+};
+
+struct mxs_regs {
+	u16 muxsel;
+	u16 drive;
+	u16 pull;
+};
+
+struct mxs_pinctrl_soc_data {
+	const struct mxs_regs *regs;
+	const struct pinctrl_pin_desc *pins;
+	unsigned npins;
+	struct mxs_function *functions;
+	unsigned nfunctions;
+	struct mxs_group *groups;
+	unsigned ngroups;
+};
+
+int mxs_pinctrl_probe(struct platform_device *pdev,
+		      struct mxs_pinctrl_soc_data *soc);
+int mxs_pinctrl_remove(struct platform_device *pdev);
+
+#endif /* __PINCTRL_MXS_H */

drivers/pinctrl/pinmux.h

@@ -31,12 +31,6 @@ void pinmux_free_setting(struct pinctrl_setting const *setting);
 int pinmux_enable_setting(struct pinctrl_setting const *setting);
 void pinmux_disable_setting(struct pinctrl_setting const *setting);
 
-void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map);
-void pinmux_show_setting(struct seq_file *s,
-			 struct pinctrl_setting const *setting);
-void pinmux_init_device_debugfs(struct dentry *devroot,
-				struct pinctrl_dev *pctldev);
-
 #else
 
 static inline int pinmux_check_ops(struct pinctrl_dev *pctldev)
@@ -89,6 +83,18 @@ static inline void pinmux_disable_setting(
 {
 }
 
+#endif
+
+#if defined(CONFIG_PINMUX) && defined(CONFIG_DEBUG_FS)
+
+void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map);
+void pinmux_show_setting(struct seq_file *s,
+			 struct pinctrl_setting const *setting);
+void pinmux_init_device_debugfs(struct dentry *devroot,
+				struct pinctrl_dev *pctldev);
+
+#else
+
 static inline void pinmux_show_map(struct seq_file *s,
 				   struct pinctrl_map const *map)
 {