Merge tag 'extcon-next-for-4.11' of...

Merge tag 'extcon-next-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 4.11

Detailed description for this pull request:
1. Add the new extcon driver.
- Intel INT3496 ACPI USB id detection driver detects whether
  EXTCON_USB_HOST is attached or detached. (extcon-intel-int3496.c)

2. Add the new type of external connector.
- EXTCON_CHG_USB_PD (USB Power Delivery) provides the increased
  power more than 7.5W to device with larger power demand.

3. Add the description for EXTCON_CHG_USB_(SDP|ACA|SLOW|FAST)
- EXTCON_CHG_USB_SDP should always appear together with EXTCON_USB
- EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST.
- EXTCON_CHG_USB_SLOW can provide at least 500mA of current at 5V
- EXTCON_CHG_USB_FAST can provide at least 1A of current at 5V.

4. Modify the connector name of EXTCON_USB_HOST
- "USB_HOST" -> "USB-HOST"

5. Update the extcon core
- Move the private extcon structure into driver/extcon directory.
  The 'struct extcon_dev' should be only handled by extcon core
  to prevent the direct access and to maintain the integrity of it.
- Remove the ambigous operation of extcon_register_notifier()
  in case of the 'extcon_dev' instance is NULL. The user of
  extcon_register_notifier() have to specify the correct instance
  of the provider extcon driver.

6. Update the extcon drivers and fix the minor issues
- Update the extcon-axp288 driver to remove the unncessary code.
- Add pinctrl operation during suspend mode to extcon-usb-gpio driver.
- Clean up the extcon-arizona/adc-jack driver.
- Use the dev_dbg() for debug messsage on extcon-palmas driver.
- Return the error code on failure of extcon_sync()

Documentation/extcon/intel-int3496.txt

+Intel INT3496 ACPI device extcon driver documentation
+-----------------------------------------------------
+
+The Intel INT3496 ACPI device extcon driver is a driver for ACPI
+devices with an acpi-id of INT3496, such as found for example on
+Intel Baytrail and Cherrytrail tablets.
+
+This ACPI device describes how the OS can read the id-pin of the devices'
+USB-otg port, as well as how it optionally can enable Vbus output on the
+otg port and how it can optionally control the muxing of the data pins
+between an USB host and an USB peripheral controller.
+
+The ACPI devices exposes this functionality by returning an array with up
+to 3 gpio descriptors from its ACPI _CRS (Current Resource Settings) call:
+
+Index 0: The input gpio for the id-pin, this is always present and valid
+Index 1: The output gpio for enabling Vbus output from the device to the otg
+         port, write 1 to enable the Vbus output (this gpio descriptor may
+         be absent or invalid)
+Index 2: The output gpio for muxing of the data pins between the USB host and
+         the USB peripheral controller, write 1 to mux to the peripheral
+         controller

drivers/extcon/Kconfig

@@ -42,6 +42,16 @@ config EXTCON_GPIO
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
+config EXTCON_INTEL_INT3496
+	tristate "Intel INT3496 ACPI device extcon driver"
+	depends on GPIOLIB && ACPI
+	help
+	  Say Y here to enable extcon support for USB OTG ports controlled by
+	  an Intel INT3496 ACPI device.
+
+	  This ACPI device is typically found on Intel Baytrail or Cherrytrail
+	  based tablets, or other Baytrail / Cherrytrail devices.
+
 config EXTCON_MAX14577
 	tristate "Maxim MAX14577/77836 EXTCON Support"
 	depends on MFD_MAX14577

drivers/extcon/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
 obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
 obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
+obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o
 obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX3355)	+= extcon-max3355.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o

drivers/extcon/devres.c

@@ -14,7 +14,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/extcon.h>
+#include "extcon.h"
 
 static int devm_extcon_dev_match(struct device *dev, void *res, void *data)
 {

drivers/extcon/extcon-adc-jack.c

@@ -67,7 +67,7 @@ static void adc_jack_handler(struct work_struct *work)
 
 	ret = iio_read_channel_raw(data->chan, &adc_val);
 	if (ret < 0) {
-		dev_err(&data->edev->dev, "read channel() error: %d\n", ret);
+		dev_err(data->dev, "read channel() error: %d\n", ret);
 		return;
 	}
 

drivers/extcon/extcon-arizona.c

@@ -236,10 +236,6 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
 
 	mode %= info->micd_num_modes;
 
-	if (arizona->pdata.micd_pol_gpio > 0)
-		gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
-					info->micd_modes[mode].gpio);
-	else
 	gpiod_set_value_cansleep(info->micd_pol_gpio,
 				 info->micd_modes[mode].gpio);
 
@@ -1412,21 +1408,21 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1,
 				ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw);
 
-	if (arizona->pdata.micd_pol_gpio > 0) {
+	if (pdata->micd_pol_gpio > 0) {
 		if (info->micd_modes[0].gpio)
 			mode = GPIOF_OUT_INIT_HIGH;
 		else
 			mode = GPIOF_OUT_INIT_LOW;
 
-		ret = devm_gpio_request_one(&pdev->dev,
-					    arizona->pdata.micd_pol_gpio,
-					    mode,
-					    "MICD polarity");
+		ret = devm_gpio_request_one(&pdev->dev, pdata->micd_pol_gpio,
+					    mode, "MICD polarity");
 		if (ret != 0) {
 			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
-				arizona->pdata.micd_pol_gpio, ret);
+				pdata->micd_pol_gpio, ret);
 			goto err_register;
 		}
+
+		info->micd_pol_gpio = gpio_to_desc(pdata->micd_pol_gpio);
 	} else {
 		if (info->micd_modes[0].gpio)
 			mode = GPIOD_OUT_HIGH;

drivers/extcon/extcon-axp288.c

@@ -21,7 +21,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
-#include <linux/usb/phy.h>
 #include <linux/notifier.h>
 #include <linux/extcon.h>
 #include <linux/regmap.h>
@@ -71,12 +70,6 @@
 #define DET_STAT_CDP			2
 #define DET_STAT_DCP			3
 
-/* IRQ enable-1 register */
-#define PWRSRC_IRQ_CFG_MASK		(BIT(4)|BIT(3)|BIT(2))
-
-/* IRQ enable-6 register */
-#define BC12_IRQ_CFG_MASK		BIT(1)
-
 enum axp288_extcon_reg {
 	AXP288_PS_STAT_REG		= 0x00,
 	AXP288_PS_BOOT_REASON_REG	= 0x02,
@@ -84,8 +77,6 @@ enum axp288_extcon_reg {
 	AXP288_BC_VBUS_CNTL_REG		= 0x2d,
 	AXP288_BC_USB_STAT_REG		= 0x2e,
 	AXP288_BC_DET_STAT_REG		= 0x2f,
-	AXP288_PWRSRC_IRQ_CFG_REG	= 0x40,
-	AXP288_BC12_IRQ_CFG_REG		= 0x45,
 };
 
 enum axp288_mux_select {
@@ -105,6 +96,7 @@ static const unsigned int axp288_extcon_cables[] = {
 	EXTCON_CHG_USB_SDP,
 	EXTCON_CHG_USB_CDP,
 	EXTCON_CHG_USB_DCP,
+	EXTCON_USB,
 	EXTCON_NONE,
 };
 
@@ -112,11 +104,11 @@ struct axp288_extcon_info {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *regmap_irqc;
-	struct axp288_extcon_pdata *pdata;
+	struct gpio_desc *gpio_mux_cntl;
 	int irq[EXTCON_IRQ_END];
 	struct extcon_dev *edev;
 	struct notifier_block extcon_nb;
-	struct usb_phy *otg;
+	unsigned int previous_cable;
 };
 
 /* Power up/down reason string array */
@@ -156,10 +148,9 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
 
 static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 {
-	static bool notify_otg, notify_charger;
-	static unsigned int cable;
 	int ret, stat, cfg, pwr_stat;
 	u8 chrg_type;
+	unsigned int cable = info->previous_cable;
 	bool vbus_attach = false;
 
 	ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
@@ -168,9 +159,9 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 		return ret;
 	}
 
-	vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT);
+	vbus_attach = (pwr_stat & PS_STAT_VBUS_VALID);
 	if (!vbus_attach)
-		goto notify_otg;
+		goto no_vbus;
 
 	/* Check charger detection completion status */
 	ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg);
@@ -190,19 +181,14 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 	switch (chrg_type) {
 	case DET_STAT_SDP:
 		dev_dbg(info->dev, "sdp cable is connected\n");
-		notify_otg = true;
-		notify_charger = true;
 		cable = EXTCON_CHG_USB_SDP;
 		break;
 	case DET_STAT_CDP:
 		dev_dbg(info->dev, "cdp cable is connected\n");
-		notify_otg = true;
-		notify_charger = true;
 		cable = EXTCON_CHG_USB_CDP;
 		break;
 	case DET_STAT_DCP:
 		dev_dbg(info->dev, "dcp cable is connected\n");
-		notify_charger = true;
 		cable = EXTCON_CHG_USB_DCP;
 		break;
 	default:
@@ -210,27 +196,28 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 			"disconnect or unknown or ID event\n");
 	}
 
-notify_otg:
-	if (notify_otg) {
+no_vbus:
 	/*
 	 * If VBUS is absent Connect D+/D- lines to PMIC for BC
 	 * detection. Else connect them to SOC for USB communication.
 	 */
-		if (info->pdata->gpio_mux_cntl)
-			gpiod_set_value(info->pdata->gpio_mux_cntl,
+	if (info->gpio_mux_cntl)
+		gpiod_set_value(info->gpio_mux_cntl,
 			vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC
 					: EXTCON_GPIO_MUX_SEL_PMIC);
 
-		atomic_notifier_call_chain(&info->otg->notifier,
-			vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL);
-	}
+	extcon_set_state_sync(info->edev, info->previous_cable, false);
+	if (info->previous_cable == EXTCON_CHG_USB_SDP)
+		extcon_set_state_sync(info->edev, EXTCON_USB, false);
 
-	if (notify_charger)
+	if (vbus_attach) {
 		extcon_set_state_sync(info->edev, cable, vbus_attach);
+		if (cable == EXTCON_CHG_USB_SDP)
+			extcon_set_state_sync(info->edev, EXTCON_USB,
+						vbus_attach);
 
-	/* Clear the flags on disconnect event */
-	if (!vbus_attach)
-		notify_otg = notify_charger = false;
+		info->previous_cable = cable;
+	}
 
 	return 0;
 
@@ -253,15 +240,10 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
 {
-	/* Unmask VBUS interrupt */
-	regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
-						PWRSRC_IRQ_CFG_MASK);
 	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
 						BC_GLOBAL_RUN, 0);
-	/* Unmask the BC1.2 complete interrupts */
-	regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
 	/* Enable the charger detection logic */
 	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
 					BC_GLOBAL_RUN, BC_GLOBAL_RUN);
@@ -271,6 +253,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 {
 	struct axp288_extcon_info *info;
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct axp288_extcon_pdata *pdata = pdev->dev.platform_data;
 	int ret, i, pirq, gpio;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
@@ -280,15 +263,10 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 	info->regmap = axp20x->regmap;
 	info->regmap_irqc = axp20x->regmap_irqc;
-	info->pdata = pdev->dev.platform_data;
-
-	if (!info->pdata) {
-		/* Try ACPI provided pdata via device properties */
-		if (!device_property_present(&pdev->dev,
-					"axp288_extcon_data\n"))
-			dev_err(&pdev->dev, "failed to get platform data\n");
-		return -ENODEV;
-	}
+	info->previous_cable = EXTCON_NONE;
+	if (pdata)
+		info->gpio_mux_cntl = pdata->gpio_mux_cntl;
+
 	platform_set_drvdata(pdev, info);
 
 	axp288_extcon_log_rsi(info);
@@ -308,23 +286,16 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* Get otg transceiver phy */
-	info->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(info->otg)) {
-		dev_err(&pdev->dev, "failed to get otg transceiver\n");
-		return PTR_ERR(info->otg);
-	}
-
 	/* Set up gpio control for USB Mux */
-	if (info->pdata->gpio_mux_cntl) {
-		gpio = desc_to_gpio(info->pdata->gpio_mux_cntl);
+	if (info->gpio_mux_cntl) {
+		gpio = desc_to_gpio(info->gpio_mux_cntl);
 		ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX");
 		if (ret < 0) {
 			dev_err(&pdev->dev,
 				"failed to request the gpio=%d\n", gpio);
 			return ret;
 		}
-		gpiod_direction_output(info->pdata->gpio_mux_cntl,
+		gpiod_direction_output(info->gpio_mux_cntl,
 						EXTCON_GPIO_MUX_SEL_PMIC);
 	}
 
@@ -349,14 +320,21 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Enable interrupts */
-	axp288_extcon_enable_irq(info);
+	/* Start charger cable type detection */
+	axp288_extcon_enable(info);
 
 	return 0;
 }
 
+static const struct platform_device_id axp288_extcon_table[] = {
+	{ .name = "axp288_extcon" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, axp288_extcon_table);
+
 static struct platform_driver axp288_extcon_driver = {
 	.probe = axp288_extcon_probe,
+	.id_table = axp288_extcon_table,
 	.driver = {
 		.name = "axp288_extcon",
 	},

drivers/extcon/extcon-intel-int3496.c

+/*
+ * Intel INT3496 ACPI device extcon driver
+ *
+ * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on android x86 kernel code which is:
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ * Author: David Cohen <david.a.cohen@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/extcon.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define INT3496_GPIO_USB_ID	0
+#define INT3496_GPIO_VBUS_EN	1
+#define INT3496_GPIO_USB_MUX	2
+#define DEBOUNCE_TIME		msecs_to_jiffies(50)
+
+struct int3496_data {
+	struct device *dev;
+	struct extcon_dev *edev;
+	struct delayed_work work;
+	struct gpio_desc *gpio_usb_id;
+	struct gpio_desc *gpio_vbus_en;
+	struct gpio_desc *gpio_usb_mux;
+	int usb_id_irq;
+};
+
+static const unsigned int int3496_cable[] = {
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static void int3496_do_usb_id(struct work_struct *work)
+{
+	struct int3496_data *data =
+		container_of(work, struct int3496_data, work.work);
+	int id = gpiod_get_value_cansleep(data->gpio_usb_id);
+
+	/* id == 1: PERIPHERAL, id == 0: HOST */
+	dev_dbg(data->dev, "Connected %s cable\n", id ? "PERIPHERAL" : "HOST");
+
+	/*
+	 * Peripheral: set USB mux to peripheral and disable VBUS
+	 * Host: set USB mux to host and enable VBUS
+	 */
+	if (!IS_ERR(data->gpio_usb_mux))
+		gpiod_direction_output(data->gpio_usb_mux, id);
+
+	if (!IS_ERR(data->gpio_vbus_en))
+		gpiod_direction_output(data->gpio_vbus_en, !id);
+
+	extcon_set_state_sync(data->edev, EXTCON_USB_HOST, !id);
+}
+
+static irqreturn_t int3496_thread_isr(int irq, void *priv)
+{
+	struct int3496_data *data = priv;
+
+	/* Let the pin settle before processing it */
+	mod_delayed_work(system_wq, &data->work, DEBOUNCE_TIME);
+
+	return IRQ_HANDLED;
+}
+
+static int int3496_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct int3496_data *data;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+	INIT_DELAYED_WORK(&data->work, int3496_do_usb_id);
+
+	data->gpio_usb_id = devm_gpiod_get_index(dev, "id",
+						INT3496_GPIO_USB_ID,
+						GPIOD_IN);
+	if (IS_ERR(data->gpio_usb_id)) {
+		ret = PTR_ERR(data->gpio_usb_id);
+		dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
+		return ret;
+	}
+
+	data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
+	if (data->usb_id_irq <= 0) {
+		dev_err(dev, "can't get USB ID IRQ: %d\n", data->usb_id_irq);
+		return -EINVAL;
+	}
+
+	data->gpio_vbus_en = devm_gpiod_get_index(dev, "vbus en",
+						 INT3496_GPIO_VBUS_EN,
+						 GPIOD_ASIS);
+	if (IS_ERR(data->gpio_vbus_en))
+		dev_info(dev, "can't request VBUS EN GPIO\n");
+
+	data->gpio_usb_mux = devm_gpiod_get_index(dev, "usb mux",
+						 INT3496_GPIO_USB_MUX,
+						 GPIOD_ASIS);
+	if (IS_ERR(data->gpio_usb_mux))
+		dev_info(dev, "can't request USB MUX GPIO\n");
+
+	/* register extcon device */
+	data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
+	if (IS_ERR(data->edev))
+		return -ENOMEM;
+
+	ret = devm_extcon_dev_register(dev, data->edev);
+	if (ret < 0) {
+		dev_err(dev, "can't register extcon device: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, data->usb_id_irq,
+					NULL, int3496_thread_isr,
+					IRQF_SHARED | IRQF_ONESHOT |
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					dev_name(dev), data);
+	if (ret < 0) {
+		dev_err(dev, "can't request IRQ for USB ID GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* queue initial processing of id-pin */
+	queue_delayed_work(system_wq, &data->work, 0);
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static int int3496_remove(struct platform_device *pdev)
+{
+	struct int3496_data *data = platform_get_drvdata(pdev);
+
+	devm_free_irq(&pdev->dev, data->usb_id_irq, data);
+	cancel_delayed_work_sync(&data->work);
+
+	return 0;
+}
+
+static struct acpi_device_id int3496_acpi_match[] = {
+	{ "INT3496" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, int3496_acpi_match);
+
+static struct platform_driver int3496_driver = {
+	.driver = {
+		.name = "intel-int3496",
+		.acpi_match_table = int3496_acpi_match,
+	},
+	.probe = int3496_probe,
+	.remove = int3496_remove,
+};
+
+module_platform_driver(int3496_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Intel INT3496 ACPI device extcon driver");
+MODULE_LICENSE("GPL");

drivers/extcon/extcon-max14577.c

@@ -531,8 +531,10 @@ static int max14577_parse_irq(struct max14577_muic_info *info, int irq_type)
 	case MAX14577_IRQ_INT1_ADC:
 	case MAX14577_IRQ_INT1_ADCLOW:
 	case MAX14577_IRQ_INT1_ADCERR:
-		/* Handle all of accessory except for
-		   type of charger accessory */
+		/*
+		 * Handle all of accessory except for
+		 * type of charger accessory.
+		 */
 		info->irq_adc = true;
 		return 1;
 	case MAX14577_IRQ_INT2_CHGTYP:

drivers/extcon/extcon-max77693.c

@@ -188,8 +188,10 @@ enum max77693_muic_acc_type {
 	MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE,
 	MAX77693_MUIC_ADC_OPEN,
 
-	/* The below accessories have same ADC value so ADCLow and
-	   ADC1K bit is used to separate specific accessory */
+	/*
+	 * The below accessories have same ADC value so ADCLow and
+	 * ADC1K bit is used to separate specific accessory.
+	 */
 						/* ADC|VBVolot|ADCLow|ADC1K| */
 	MAX77693_MUIC_GND_USB_HOST = 0x100,	/* 0x0|      0|     0|    0| */
 	MAX77693_MUIC_GND_USB_HOST_VB = 0x104,	/* 0x0|      1|     0|    0| */
@@ -970,8 +972,10 @@ static void max77693_muic_irq_work(struct work_struct *work)
 	case MAX77693_MUIC_IRQ_INT1_ADC_LOW:
 	case MAX77693_MUIC_IRQ_INT1_ADC_ERR:
 	case MAX77693_MUIC_IRQ_INT1_ADC1K:
-		/* Handle all of accessory except for
-		   type of charger accessory */
+		/*
+		 * Handle all of accessory except for
+		 * type of charger accessory.
+		 */
 		ret = max77693_muic_adc_handler(info);
 		break;
 	case MAX77693_MUIC_IRQ_INT2_CHGTYP:

drivers/extcon/extcon-max77843.c

@@ -97,8 +97,10 @@ enum max77843_muic_accessory_type {
 	MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
 	MAX77843_MUIC_ADC_OPEN,
 
-	/* The blow accessories should check
-	   not only ADC value but also ADC1K and VBVolt value. */
+	/*
+	 * The below accessories should check
+	 * not only ADC value but also ADC1K and VBVolt value.
+	 */
 						/* Offset|ADC1K|VBVolt| */
 	MAX77843_MUIC_GND_USB_HOST = 0x100,	/*    0x1|    0|     0| */
 	MAX77843_MUIC_GND_USB_HOST_VB = 0x101,	/*    0x1|    0|     1| */
@@ -265,16 +267,20 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
 		/* Check GROUND accessory with charger cable */
 		if (adc == MAX77843_MUIC_ADC_GROUND) {
 			if (chg_type == MAX77843_MUIC_CHG_NONE) {
-				/* The following state when charger cable is
+				/*
+				 * The following state when charger cable is
 				 * disconnected but the GROUND accessory still
-				 * connected */
+				 * connected.
+				 */
 				*attached = false;
 				cable_type = info->prev_chg_type;
 				info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
 			} else {
 
-				/* The following state when charger cable is
-				 * connected on the GROUND accessory */
+				/*
+				 * The following state when charger cable is
+				 * connected on the GROUND accessory.
+				 */
 				*attached = true;
 				cable_type = MAX77843_MUIC_CHG_GND;
 				info->prev_chg_type = MAX77843_MUIC_CHG_GND;
@@ -299,11 +305,13 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
 		} else {
 			*attached = true;
 
-			/* Offset|ADC1K|VBVolt|
+			/*
+			 * Offset|ADC1K|VBVolt|
 			 *    0x1|    0|     0| USB-HOST
 			 *    0x1|    0|     1| USB-HOST with VB
 			 *    0x1|    1|     0| MHL
-			 *    0x1|    1|     1| MHL with VB */
+			 *    0x1|    1|     1| MHL with VB
+			 */
 			/* Get ADC1K register bit */
 			gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
 					MAX77843_MUIC_STATUS1_ADC1K_MASK);

drivers/extcon/extcon-palmas.c

@@ -62,7 +62,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
 			extcon_set_state_sync(edev, EXTCON_USB, true);
-			dev_info(palmas_usb->dev, "USB cable is attached\n");
+			dev_dbg(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
 				"Spurious connect event detected\n");
@@ -71,7 +71,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
 			extcon_set_state_sync(edev, EXTCON_USB, false);
-			dev_info(palmas_usb->dev, "USB cable is detached\n");
+			dev_dbg(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
 				"Spurious disconnect event detected\n");
@@ -99,7 +99,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
 		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
-		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
+		dev_dbg(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
 		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
@@ -107,17 +107,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
 		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
-		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+		dev_dbg(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
 				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
 		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
-		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+		dev_dbg(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
 		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
-		dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
+		dev_dbg(palmas_usb->dev, " USB-HOST cable is attached\n");
 	}
 
 	return IRQ_HANDLED;
@@ -138,10 +138,10 @@ static void palmas_gpio_id_detect(struct work_struct *work)
 
 	if (id) {
 		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
-		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+		dev_dbg(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else {
 		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
-		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
+		dev_dbg(palmas_usb->dev, "USB-HOST cable is attached\n");
 	}
 }
 
@@ -190,6 +190,11 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	struct palmas_usb *palmas_usb;
 	int status;
 
+	if (!palmas) {
+		dev_err(&pdev->dev, "failed to get valid parent\n");
+		return -EINVAL;
+	}
+
 	palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL);
 	if (!palmas_usb)
 		return -ENOMEM;

drivers/extcon/extcon-rt8973a.c

@@ -142,8 +142,10 @@ enum rt8973a_muic_acc_type {
 	RT8973A_MUIC_ADC_UNKNOWN_ACC_5,
 	RT8973A_MUIC_ADC_OPEN = 0x1f,
 
-	/* The below accessories has same ADC value (0x1f).
-	   So, Device type1 is used to separate specific accessory. */
+	/*
+	 * The below accessories has same ADC value (0x1f).
+	 * So, Device type1 is used to separate specific accessory.
+	 */
 					/* |---------|--ADC| */
 					/* |    [7:5]|[4:0]| */
 	RT8973A_MUIC_ADC_USB = 0x3f,	/* |      001|11111| */

drivers/extcon/extcon-sm5502.c

@@ -135,8 +135,10 @@ enum sm5502_muic_acc_type {
 	SM5502_MUIC_ADC_AUDIO_TYPE1,
 	SM5502_MUIC_ADC_OPEN = 0x1f,
 
-	/* The below accessories have same ADC value (0x1f or 0x1e).
-	   So, Device type1 is used to separate specific accessory. */
+	/*
+	 * The below accessories have same ADC value (0x1f or 0x1e).
+	 * So, Device type1 is used to separate specific accessory.
+	 */
 							/* |---------|--ADC| */
 							/* |    [7:5]|[4:0]| */
 	SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e,	/* |      001|11110| */

drivers/extcon/extcon-usb-gpio.c

@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/acpi.h>
+#include <linux/pinctrl/consumer.h>
 
 #define USB_GPIO_DEBOUNCE_MS	20	/* ms */
 
@@ -245,6 +246,9 @@ static int usb_extcon_suspend(struct device *dev)
 	if (info->vbus_gpiod)
 		disable_irq(info->vbus_irq);
 
+	if (!device_may_wakeup(dev))
+		pinctrl_pm_select_sleep_state(dev);
+
 	return ret;
 }
 
@@ -253,6 +257,9 @@ static int usb_extcon_resume(struct device *dev)
 	struct usb_extcon_info *info = dev_get_drvdata(dev);
 	int ret = 0;
 
+	if (!device_may_wakeup(dev))
+		pinctrl_pm_select_default_state(dev);
+
 	if (device_may_wakeup(dev)) {
 		if (info->id_gpiod) {
 			ret = disable_irq_wake(info->id_irq);

drivers/extcon/extcon.c

@@ -30,11 +30,12 @@
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/err.h>
-#include <linux/extcon.h>
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
+#include "extcon.h"
+
 #define SUPPORTED_CABLE_MAX	32
 #define CABLE_NAME_MAX		30
 
@@ -59,7 +60,7 @@ struct __extcon_info {
 	[EXTCON_USB_HOST] = {
 		.type = EXTCON_TYPE_USB,
 		.id = EXTCON_USB_HOST,
-		.name = "USB_HOST",
+		.name = "USB-HOST",
 	},
 
 	/* Charging external connector */
@@ -98,6 +99,11 @@ struct __extcon_info {
 		.id = EXTCON_CHG_WPT,
 		.name = "WPT",
 	},
+	[EXTCON_CHG_USB_PD] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_PD,
+		.name = "PD",
+	},
 
 	/* Jack external connector */
 	[EXTCON_JACK_MICROPHONE] = {
@@ -906,10 +912,9 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 	unsigned long flags;
 	int ret, idx = -EINVAL;
 
-	if (!nb)
+	if (!edev || !nb)
 		return -EINVAL;
 
-	if (edev) {
 	idx = find_cable_index_by_id(edev, id);
 	if (idx < 0)
 		return idx;
@@ -917,24 +922,6 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 	spin_lock_irqsave(&edev->lock, flags);
 	ret = raw_notifier_chain_register(&edev->nh[idx], nb);
 	spin_unlock_irqrestore(&edev->lock, flags);
-	} else {
-		struct extcon_dev *extd;
-
-		mutex_lock(&extcon_dev_list_lock);
-		list_for_each_entry(extd, &extcon_dev_list, entry) {
-			idx = find_cable_index_by_id(extd, id);
-			if (idx >= 0)
-				break;
-		}
-		mutex_unlock(&extcon_dev_list_lock);
-
-		if (idx >= 0) {
-			edev = extd;
-			return extcon_register_notifier(extd, id, nb);
-		} else {
-			ret = -ENODEV;
-		}
-	}
 
 	return ret;
 }

drivers/extcon/extcon.h

+#ifndef __LINUX_EXTCON_INTERNAL_H__
+#define __LINUX_EXTCON_INTERNAL_H__
+
+#include <linux/extcon.h>
+
+/**
+ * struct extcon_dev - An extcon device represents one external connector.
+ * @name:		The name of this extcon device. Parent device name is
+ *			used if NULL.
+ * @supported_cable:	Array of supported cable names ending with EXTCON_NONE.
+ *			If supported_cable is NULL, cable name related APIs
+ *			are disabled.
+ * @mutually_exclusive:	Array of mutually exclusive set of cables that cannot
+ *			be attached simultaneously. The array should be
+ *			ending with NULL or be NULL (no mutually exclusive
+ *			cables). For example, if it is { 0x7, 0x30, 0}, then,
+ *			{0, 1}, {0, 1, 2}, {0, 2}, {1, 2}, or {4, 5} cannot
+ *			be attached simulataneously. {0x7, 0} is equivalent to
+ *			{0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
+ *			can be no simultaneous connections.
+ * @dev:		Device of this extcon.
+ * @state:		Attach/detach state of this extcon. Do not provide at
+ *			register-time.
+ * @nh:			Notifier for the state change events from this extcon
+ * @entry:		To support list of extcon devices so that users can
+ *			search for extcon devices based on the extcon name.
+ * @lock:
+ * @max_supported:	Internal value to store the number of cables.
+ * @extcon_dev_type:	Device_type struct to provide attribute_groups
+ *			customized for each extcon device.
+ * @cables:		Sysfs subdirectories. Each represents one cable.
+ *
+ * In most cases, users only need to provide "User initializing data" of
+ * this struct when registering an extcon. In some exceptional cases,
+ * optional callbacks may be needed. However, the values in "internal data"
+ * are overwritten by register function.
+ */
+struct extcon_dev {
+	/* Optional user initializing data */
+	const char *name;
+	const unsigned int *supported_cable;
+	const u32 *mutually_exclusive;
+
+	/* Internal data. Please do not set. */
+	struct device dev;
+	struct raw_notifier_head *nh;
+	struct list_head entry;
+	int max_supported;
+	spinlock_t lock;	/* could be called by irq handler */
+	u32 state;
+
+	/* /sys/class/extcon/.../cable.n/... */
+	struct device_type extcon_dev_type;
+	struct extcon_cable *cables;
+
+	/* /sys/class/extcon/.../mutually_exclusive/... */
+	struct attribute_group attr_g_muex;
+	struct attribute **attrs_muex;
+	struct device_attribute *d_attrs_muex;
+};
+
+#endif /* __LINUX_EXTCON_INTERNAL_H__ */

include/linux/extcon.h

@@ -46,7 +46,18 @@
 #define EXTCON_USB		1
 #define EXTCON_USB_HOST		2
 
-/* Charging external connector */
+/*
+ * Charging external connector
+ *
+ * When one SDP charger connector was reported, we should also report
+ * the USB connector, which means EXTCON_CHG_USB_SDP should always
+ * appear together with EXTCON_USB. The same as ACA charger connector,
+ * EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST.
+ *
+ * The EXTCON_CHG_USB_SLOW connector can provide at least 500mA of
+ * current at 5V. The EXTCON_CHG_USB_FAST connector can provide at
+ * least 1A of current at 5V.
+ */
 #define EXTCON_CHG_USB_SDP	5	/* Standard Downstream Port */
 #define EXTCON_CHG_USB_DCP	6	/* Dedicated Charging Port */
 #define EXTCON_CHG_USB_CDP	7	/* Charging Downstream Port */
@@ -54,6 +65,7 @@
 #define EXTCON_CHG_USB_FAST	9
 #define EXTCON_CHG_USB_SLOW	10
 #define EXTCON_CHG_WPT		11	/* Wireless Power Transfer */
+#define EXTCON_CHG_USB_PD	12	/* USB Power Delivery */
 
 /* Jack external connector */
 #define EXTCON_JACK_MICROPHONE	20
@@ -160,62 +172,7 @@ union extcon_property_value {
 };
 
 struct extcon_cable;
-
-/**
- * struct extcon_dev - An extcon device represents one external connector.
- * @name:		The name of this extcon device. Parent device name is
- *			used if NULL.
- * @supported_cable:	Array of supported cable names ending with EXTCON_NONE.
- *			If supported_cable is NULL, cable name related APIs
- *			are disabled.
- * @mutually_exclusive:	Array of mutually exclusive set of cables that cannot
- *			be attached simultaneously. The array should be
- *			ending with NULL or be NULL (no mutually exclusive
- *			cables). For example, if it is { 0x7, 0x30, 0}, then,
- *			{0, 1}, {0, 1, 2}, {0, 2}, {1, 2}, or {4, 5} cannot
- *			be attached simulataneously. {0x7, 0} is equivalent to
- *			{0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
- *			can be no simultaneous connections.
- * @dev:		Device of this extcon.
- * @state:		Attach/detach state of this extcon. Do not provide at
- *			register-time.
- * @nh:			Notifier for the state change events from this extcon
- * @entry:		To support list of extcon devices so that users can
- *			search for extcon devices based on the extcon name.
- * @lock:
- * @max_supported:	Internal value to store the number of cables.
- * @extcon_dev_type:	Device_type struct to provide attribute_groups
- *			customized for each extcon device.
- * @cables:		Sysfs subdirectories. Each represents one cable.
- *
- * In most cases, users only need to provide "User initializing data" of
- * this struct when registering an extcon. In some exceptional cases,
- * optional callbacks may be needed. However, the values in "internal data"
- * are overwritten by register function.
- */
-struct extcon_dev {
-	/* Optional user initializing data */
-	const char *name;
-	const unsigned int *supported_cable;
-	const u32 *mutually_exclusive;
-
-	/* Internal data. Please do not set. */
-	struct device dev;
-	struct raw_notifier_head *nh;
-	struct list_head entry;
-	int max_supported;
-	spinlock_t lock;	/* could be called by irq handler */
-	u32 state;
-
-	/* /sys/class/extcon/.../cable.n/... */
-	struct device_type extcon_dev_type;
-	struct extcon_cable *cables;
-
-	/* /sys/class/extcon/.../mutually_exclusive/... */
-	struct attribute_group attr_g_muex;
-	struct attribute **attrs_muex;
-	struct device_attribute *d_attrs_muex;
-};
+struct extcon_dev;
 
 #if IS_ENABLED(CONFIG_EXTCON)
 

include/linux/extcon/extcon-adc-jack.h

@@ -59,7 +59,7 @@ struct adc_jack_pdata {
 	const char *name;
 	const char *consumer_channel;
 
-	const enum extcon *cable_names;
+	const unsigned int *cable_names;
 
 	/* The last entry's state should be 0 */
 	struct adc_jack_cond *adc_conditions;