ath9k_hw: Fix enabling of MCI and RTT

tested in AR9462 Rev:2, both hardware capability flag are set
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/hw.c

@@ -2390,8 +2390,17 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		if (AR_SREV_9485_OR_LATER(ah))
 			ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
 	}
-	if (AR_SREV_9462(ah))
-		pCap->hw_caps |= ATH9K_HW_CAP_RTT | ATH9K_HW_CAP_MCI;
+
+	if (AR_SREV_9462(ah)) {
+
+		if (!(ah->ent_mode & AR_ENT_OTP_49GHZ_DISABLE))
+			pCap->hw_caps |= ATH9K_HW_CAP_MCI;
+
+		if (AR_SREV_9462_20(ah))
+			pCap->hw_caps |= ATH9K_HW_CAP_RTT;
+
+	}
+
 
 	return 0;
 }

drivers/net/wireless/ath/ath9k/reg.h

@@ -1151,6 +1151,7 @@ enum {
 #define AR_INTR_PRIO_ASYNC_ENABLE (AR_SREV_9340(ah) ? 0x4094 : 0x40d4)
 #define AR_ENT_OTP		  0x40d8
 #define AR_ENT_OTP_CHAIN2_DISABLE               0x00020000
+#define AR_ENT_OTP_49GHZ_DISABLE		0x00100000
 #define AR_ENT_OTP_MIN_PKT_SIZE_DISABLE		0x00800000
 
 #define AR_CH0_BB_DPLL1		 0x16180