iio: adc128s052: Add pin-compatible IDs

The datasheets for ADC122S021 and ADC124S021 list two more
pin-compatible alternatives for each device.

Add their IDs as compatible strings.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Javier Arteaga <javier@emutex.com>
Signed-off-by: Dan O'Donovan <dan@emutex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt

 * Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
 
 Required properties:
- - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021"
+ - compatible: Should be one of:
+   - "ti,adc128s052"
+   - "ti,adc122s021"
+   - "ti,adc122s051"
+   - "ti,adc122s101"
+   - "ti,adc124s021"
+   - "ti,adc124s051"
+   - "ti,adc124s101"
  - reg: spi chip select number for the device
  - vref-supply: The regulator supply for ADC reference voltage
 

drivers/iio/adc/ti-adc128s052.c

@@ -186,15 +186,23 @@ static int adc128_remove(struct spi_device *spi)
 static const struct of_device_id adc128_of_match[] = {
 	{ .compatible = "ti,adc128s052", },
 	{ .compatible = "ti,adc122s021", },
+	{ .compatible = "ti,adc122s051", },
+	{ .compatible = "ti,adc122s101", },
 	{ .compatible = "ti,adc124s021", },
+	{ .compatible = "ti,adc124s051", },
+	{ .compatible = "ti,adc124s101", },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, adc128_of_match);
 
 static const struct spi_device_id adc128_id[] = {
-	{ "adc128s052", 0},	/* index into adc128_config */
-	{ "adc122s021",	1},
-	{ "adc124s021", 2},
+	{ "adc128s052", 0 },	/* index into adc128_config */
+	{ "adc122s021",	1 },
+	{ "adc122s051",	1 },
+	{ "adc122s101",	1 },
+	{ "adc124s021", 2 },
+	{ "adc124s051", 2 },
+	{ "adc124s101", 2 },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, adc128_id);