Commit 38972375 authored by Jakub Kicinski's avatar Jakub Kicinski Committed by Bjorn Helgaas

PCI/IOV: Reset total_VFs limit after detaching PF driver

The TotalVFs register in the SR-IOV capability is the hardware limit on the
number of VFs.  A PF driver can limit the number of VFs further with
pci_sriov_set_totalvfs().  When the PF driver is removed, reset any VF
limit that was imposed by the driver because that limit may not apply to
other drivers.

Before 8d85a7a4 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions", and the nfp driver used that to remove the VF limit when the
driver unloads.

8d85a7a4 broke that because instead of removing the VF limit,
pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that
limit persists even if another driver is loaded.

We could fix that by making the nfp driver reset the limit when it unloads,
but it seems more robust to do it in the PCI core instead of relying on the
driver.

The regression scenario is:

  nfp_pci_probe (driver 1)
  ...
  nfp_pci_remove
    pci_sriov_set_totalvfs(pf->pdev, 0)   # limits VFs to 0

  ...
  nfp_pci_probe (driver 2)
    nfp_rtsym_read_le("nfd_vf_cfg_max_vfs")
    # no VF limit from firmware

Now driver 2 is broken because the VF limit is still 0 from driver 1.

Fixes: 8d85a7a4 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog, rename functions]
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent 3dc6ddfe
......@@ -574,6 +574,22 @@ void pci_iov_release(struct pci_dev *dev)
sriov_release(dev);
}
/**
* pci_iov_remove - clean up SR-IOV state after PF driver is detached
* @dev: the PCI device
*/
void pci_iov_remove(struct pci_dev *dev)
{
struct pci_sriov *iov = dev->sriov;
if (!dev->is_physfn)
return;
iov->driver_max_VFs = iov->total_VFs;
if (iov->num_VFs)
pci_warn(dev, "driver left SR-IOV enabled after remove\n");
}
/**
* pci_iov_update_resource - update a VF BAR
* @dev: the PCI device
......
......@@ -445,6 +445,7 @@ static int pci_device_remove(struct device *dev)
}
pcibios_free_irq(pci_dev);
pci_dev->driver = NULL;
pci_iov_remove(pci_dev);
}
/* Undo the runtime PM settings in local_pci_probe() */
......
......@@ -311,6 +311,7 @@ static inline void pci_restore_ats_state(struct pci_dev *dev)
#ifdef CONFIG_PCI_IOV
int pci_iov_init(struct pci_dev *dev);
void pci_iov_release(struct pci_dev *dev);
void pci_iov_remove(struct pci_dev *dev);
void pci_iov_update_resource(struct pci_dev *dev, int resno);
resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
void pci_restore_iov_state(struct pci_dev *dev);
......@@ -323,6 +324,9 @@ static inline int pci_iov_init(struct pci_dev *dev)
}
static inline void pci_iov_release(struct pci_dev *dev)
{
}
static inline void pci_iov_remove(struct pci_dev *dev)
{
}
static inline void pci_restore_iov_state(struct pci_dev *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment