Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer fixes from Dmitry Torokhov:

 - a change to the ALPS driver where we had limit the quirk for
   trackstick handling from being active on all Dells to just a few
   models

 - a fix for a build dependency issue in the sur40 driver

 - a small clock handling fixup in the LPC32xx touchscreen driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits
  Input: sur40 - add dependency on VIDEO_V4L2
  Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock

drivers/input/mouse/alps.c

@@ -100,7 +100,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
 #define ALPS_FOUR_BUTTONS	0x40	/* 4 direction button present */
 #define ALPS_PS2_INTERLEAVED	0x80	/* 3-byte PS/2 packet interleaved with
 					   6-byte ALPS packet */
-#define ALPS_DELL		0x100	/* device is a Dell laptop */
+#define ALPS_STICK_BITS		0x100	/* separate stick button bits */
 #define ALPS_BUTTONPAD		0x200	/* device is a clickpad */
 
 static const struct alps_model_info alps_model_data[] = {
@@ -159,6 +159,43 @@ static const struct alps_protocol_info alps_v8_protocol_data = {
 	ALPS_PROTO_V8, 0x18, 0x18, 0
 };
 
+/*
+ * Some v2 models report the stick buttons in separate bits
+ */
+static const struct dmi_system_id alps_dmi_has_separate_stick_buttons[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Extrapolated from other entries */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D420"),
+		},
+	},
+	{
+		/* Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D430"),
+		},
+	},
+	{
+		/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D620"),
+		},
+	},
+	{
+		/* Extrapolated from other entries */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D630"),
+		},
+	},
+#endif
+	{ }
+};
+
 static void alps_set_abs_params_st(struct alps_data *priv,
 				   struct input_dev *dev1);
 static void alps_set_abs_params_semi_mt(struct alps_data *priv,
@@ -253,9 +290,8 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
 		return;
 	}
 
-	/* Dell non interleaved V2 dualpoint has separate stick button bits */
-	if (priv->proto_version == ALPS_PROTO_V2 &&
-	    priv->flags == (ALPS_DELL | ALPS_PASS | ALPS_DUALPOINT)) {
+	/* Some models have separate stick button bits */
+	if (priv->flags & ALPS_STICK_BITS) {
 		left |= packet[0] & 1;
 		right |= packet[0] & 2;
 		middle |= packet[0] & 4;
@@ -2552,8 +2588,6 @@ static int alps_set_protocol(struct psmouse *psmouse,
 	priv->byte0 = protocol->byte0;
 	priv->mask0 = protocol->mask0;
 	priv->flags = protocol->flags;
-	if (dmi_name_in_vendors("Dell"))
-		priv->flags |= ALPS_DELL;
 
 	priv->x_max = 2000;
 	priv->y_max = 1400;
@@ -2568,6 +2602,8 @@ static int alps_set_protocol(struct psmouse *psmouse,
 		priv->set_abs_params = alps_set_abs_params_st;
 		priv->x_max = 1023;
 		priv->y_max = 767;
+		if (dmi_check_system(alps_dmi_has_separate_stick_buttons))
+			priv->flags |= ALPS_STICK_BITS;
 		break;
 
 	case ALPS_PROTO_V3:

drivers/input/touchscreen/Kconfig

@@ -1006,6 +1006,7 @@ config TOUCHSCREEN_SUN4I
 config TOUCHSCREEN_SUR40
 	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
+	depends on VIDEO_V4L2
 	select INPUT_POLLDEV
 	select VIDEOBUF2_DMA_SG
 	help

drivers/input/touchscreen/lpc32xx_ts.c

@@ -139,14 +139,14 @@ static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc)
 		   tsc_readl(tsc, LPC32XX_TSC_CON) &
 			     ~LPC32XX_TSC_ADCCON_AUTO_EN);
 
-	clk_disable(tsc->clk);
+	clk_disable_unprepare(tsc->clk);
 }
 
 static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc)
 {
 	u32 tmp;
 
-	clk_enable(tsc->clk);
+	clk_prepare_enable(tsc->clk);
 
 	tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP;