iop13xx: surface the iop13xx adma units to the iop-adma driver

Adds the platform device definitions and the architecture specific
support routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* added 'descriptor pool size' to the platform data
* add base support for buffer sizes larger than 16MB (hw max)
* build error fix from Kirill A. Shutemov
* rebase for async_tx changes
* add interrupt support
* do not call platform register macros in driver code
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

arch/arm/mach-iop13xx/setup.c

@@ -25,6 +25,7 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/hardware/iop_adma.h>
 
 #define IOP13XX_UART_XTAL 33334000
 #define IOP13XX_SETUP_DEBUG 0
@@ -236,19 +237,143 @@ static unsigned long iq8134x_probe_flash_size(void)
 }
 #endif
 
+/* ADMA Channels */
+static struct resource iop13xx_adma_0_resources[] = {
+	[0] = {
+		.start = IOP13XX_ADMA_PHYS_BASE(0),
+		.end = IOP13XX_ADMA_UPPER_PA(0),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_ADMA0_EOT,
+		.end = IRQ_IOP13XX_ADMA0_EOT,
+		.flags = IORESOURCE_IRQ
+	},
+	[2] = {
+		.start = IRQ_IOP13XX_ADMA0_EOC,
+		.end = IRQ_IOP13XX_ADMA0_EOC,
+		.flags = IORESOURCE_IRQ
+	},
+	[3] = {
+		.start = IRQ_IOP13XX_ADMA0_ERR,
+		.end = IRQ_IOP13XX_ADMA0_ERR,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_adma_1_resources[] = {
+	[0] = {
+		.start = IOP13XX_ADMA_PHYS_BASE(1),
+		.end = IOP13XX_ADMA_UPPER_PA(1),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_ADMA1_EOT,
+		.end = IRQ_IOP13XX_ADMA1_EOT,
+		.flags = IORESOURCE_IRQ
+	},
+	[2] = {
+		.start = IRQ_IOP13XX_ADMA1_EOC,
+		.end = IRQ_IOP13XX_ADMA1_EOC,
+		.flags = IORESOURCE_IRQ
+	},
+	[3] = {
+		.start = IRQ_IOP13XX_ADMA1_ERR,
+		.end = IRQ_IOP13XX_ADMA1_ERR,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop13xx_adma_2_resources[] = {
+	[0] = {
+		.start = IOP13XX_ADMA_PHYS_BASE(2),
+		.end = IOP13XX_ADMA_UPPER_PA(2),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IOP13XX_ADMA2_EOT,
+		.end = IRQ_IOP13XX_ADMA2_EOT,
+		.flags = IORESOURCE_IRQ
+	},
+	[2] = {
+		.start = IRQ_IOP13XX_ADMA2_EOC,
+		.end = IRQ_IOP13XX_ADMA2_EOC,
+		.flags = IORESOURCE_IRQ
+	},
+	[3] = {
+		.start = IRQ_IOP13XX_ADMA2_ERR,
+		.end = IRQ_IOP13XX_ADMA2_ERR,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static u64 iop13xx_adma_dmamask = DMA_64BIT_MASK;
+static struct iop_adma_platform_data iop13xx_adma_0_data = {
+	.hw_id = 0,
+	.pool_size = PAGE_SIZE,
+};
+
+static struct iop_adma_platform_data iop13xx_adma_1_data = {
+	.hw_id = 1,
+	.pool_size = PAGE_SIZE,
+};
+
+static struct iop_adma_platform_data iop13xx_adma_2_data = {
+	.hw_id = 2,
+	.pool_size = PAGE_SIZE,
+};
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_adma_0_channel = {
+	.name = "iop-adma",
+	.id = 0,
+	.num_resources = 4,
+	.resource = iop13xx_adma_0_resources,
+	.dev = {
+		.dma_mask = &iop13xx_adma_dmamask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+		.platform_data = (void *) &iop13xx_adma_0_data,
+	},
+};
+
+static struct platform_device iop13xx_adma_1_channel = {
+	.name = "iop-adma",
+	.id = 0,
+	.num_resources = 4,
+	.resource = iop13xx_adma_1_resources,
+	.dev = {
+		.dma_mask = &iop13xx_adma_dmamask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+		.platform_data = (void *) &iop13xx_adma_1_data,
+	},
+};
+
+static struct platform_device iop13xx_adma_2_channel = {
+	.name = "iop-adma",
+	.id = 0,
+	.num_resources = 4,
+	.resource = iop13xx_adma_2_resources,
+	.dev = {
+		.dma_mask = &iop13xx_adma_dmamask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+		.platform_data = (void *) &iop13xx_adma_2_data,
+	},
+};
+
 void __init iop13xx_map_io(void)
 {
 	/* Initialize the Static Page Table maps */
 	iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
 }
 
-static int init_uart = 0;
-static int init_i2c = 0;
+static int init_uart;
+static int init_i2c;
+static int init_adma;
 
 void __init iop13xx_platform_init(void)
 {
 	int i;
-	u32 uart_idx, i2c_idx, plat_idx;
+	u32 uart_idx, i2c_idx, adma_idx, plat_idx;
 	struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
 
 	/* set the bases so we can read the device id */
@@ -294,6 +419,12 @@ void __init iop13xx_platform_init(void)
 		}
 	}
 
+	if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) {
+		init_adma |= IOP13XX_INIT_ADMA_0;
+		init_adma |= IOP13XX_INIT_ADMA_1;
+		init_adma |= IOP13XX_INIT_ADMA_2;
+	}
+
 	plat_idx = 0;
 	uart_idx = 0;
 	i2c_idx = 0;
@@ -332,6 +463,56 @@ void __init iop13xx_platform_init(void)
 		}
 	}
 
+	/* initialize adma channel ids and capabilities */
+	adma_idx = 0;
+	for (i = 0; i < IQ81340_NUM_ADMA; i++) {
+		struct iop_adma_platform_data *plat_data;
+		if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG)
+			printk(KERN_INFO
+				"Adding adma%d to platform device list\n", i);
+		switch (init_adma & (1 << i)) {
+		case IOP13XX_INIT_ADMA_0:
+			iop13xx_adma_0_channel.id = adma_idx++;
+			iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel;
+			plat_data = &iop13xx_adma_0_data;
+			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
+			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
+			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
+			break;
+		case IOP13XX_INIT_ADMA_1:
+			iop13xx_adma_1_channel.id = adma_idx++;
+			iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel;
+			plat_data = &iop13xx_adma_1_data;
+			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
+			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
+			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
+			break;
+		case IOP13XX_INIT_ADMA_2:
+			iop13xx_adma_2_channel.id = adma_idx++;
+			iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel;
+			plat_data = &iop13xx_adma_2_data;
+			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
+			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
+			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask);
+			break;
+		}
+	}
+
 #ifdef CONFIG_MTD_PHYSMAP
 	iq8134x_flash_resource.end = iq8134x_flash_resource.start +
 				iq8134x_probe_flash_size() - 1;
@@ -399,5 +580,35 @@ static int __init iop13xx_init_i2c_setup(char *str)
 	return 1;
 }
 
+static int __init iop13xx_init_adma_setup(char *str)
+{
+	if (str)	{
+		while (*str != '\0') {
+			switch (*str) {
+			case '0':
+				init_adma |= IOP13XX_INIT_ADMA_0;
+				break;
+			case '1':
+				init_adma |= IOP13XX_INIT_ADMA_1;
+				break;
+			case '2':
+				init_adma |= IOP13XX_INIT_ADMA_2;
+				break;
+			case ',':
+			case '=':
+				break;
+			default:
+				PRINTK("\"iop13xx_init_adma\" malformed"
+					    " at character: \'%c\'", *str);
+				*(str + 1) = '\0';
+				init_adma = IOP13XX_INIT_ADMA_DEFAULT;
+			}
+			str++;
+		}
+	}
+	return 1;
+}
+
+__setup("iop13xx_init_adma", iop13xx_init_adma_setup);
 __setup("iop13xx_init_uart", iop13xx_init_uart_setup);
 __setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);

include/asm-arm/arch-iop13xx/iop13xx.h

@@ -166,12 +166,22 @@ static inline int iop13xx_cpu_id(void)
 #define IOP13XX_INIT_I2C_1	      (1 << 1)
 #define IOP13XX_INIT_I2C_2	      (1 << 2)
 
+/* ADMA selection flags */
+/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
+#define IOP13XX_INIT_ADMA_DEFAULT     (0)
+#define IOP13XX_INIT_ADMA_0           (1 << 0)
+#define IOP13XX_INIT_ADMA_1           (1 << 1)
+#define IOP13XX_INIT_ADMA_2           (1 << 2)
+
+/* Platform devices */
 #define IQ81340_NUM_UART     		2
 #define IQ81340_NUM_I2C      		3
 #define IQ81340_NUM_PHYS_MAP_FLASH	1
-#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART +\
-				IQ81340_NUM_I2C +\
-				IQ81340_NUM_PHYS_MAP_FLASH)
+#define IQ81340_NUM_ADMA     		3
+#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
+				IQ81340_NUM_I2C + \
+				IQ81340_NUM_PHYS_MAP_FLASH + \
+				IQ81340_NUM_ADMA)
 
 /*========================== PMMR offsets for key registers ============*/
 #define IOP13XX_ATU0_PMMR_OFFSET   	0x00048000
@@ -444,22 +454,6 @@ static inline int iop13xx_cpu_id(void)
 /*==============================ADMA UNITS===============================*/
 #define IOP13XX_ADMA_PHYS_BASE(chan)	IOP13XX_REG_ADDR32_PHYS((chan << 9))
 #define IOP13XX_ADMA_UPPER_PA(chan)	(IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
-#define IOP13XX_ADMA_OFFSET(chan, ofs)	IOP13XX_REG_ADDR32((chan << 9) + (ofs))
-
-#define IOP13XX_ADMA_ACCR(chan)      IOP13XX_ADMA_OFFSET(chan, 0x0)
-#define IOP13XX_ADMA_ACSR(chan)      IOP13XX_ADMA_OFFSET(chan, 0x4)
-#define IOP13XX_ADMA_ADAR(chan)      IOP13XX_ADMA_OFFSET(chan, 0x8)
-#define IOP13XX_ADMA_IIPCR(chan)     IOP13XX_ADMA_OFFSET(chan, 0x18)
-#define IOP13XX_ADMA_IIPAR(chan)     IOP13XX_ADMA_OFFSET(chan, 0x1c)
-#define IOP13XX_ADMA_IIPUAR(chan)    IOP13XX_ADMA_OFFSET(chan, 0x20)
-#define IOP13XX_ADMA_ANDAR(chan)     IOP13XX_ADMA_OFFSET(chan, 0x24)
-#define IOP13XX_ADMA_ADCR(chan)      IOP13XX_ADMA_OFFSET(chan, 0x28)
-#define IOP13XX_ADMA_CARMD(chan)     IOP13XX_ADMA_OFFSET(chan, 0x2c)
-#define IOP13XX_ADMA_ABCR(chan)      IOP13XX_ADMA_OFFSET(chan, 0x30)
-#define IOP13XX_ADMA_DLADR(chan)     IOP13XX_ADMA_OFFSET(chan, 0x34)
-#define IOP13XX_ADMA_DUADR(chan)     IOP13XX_ADMA_OFFSET(chan, 0x38)
-#define IOP13XX_ADMA_SLAR(src, chan) IOP13XX_ADMA_OFFSET(chan, 0x3c + (src <<3))
-#define IOP13XX_ADMA_SUAR(src, chan) IOP13XX_ADMA_OFFSET(chan, 0x40 + (src <<3))
 
 /*==============================XSI BRIDGE===============================*/
 #define IOP13XX_XBG_BECSR		IOP13XX_REG_ADDR32(0x178c)