Commit 3a7774ce authored by Stephen M. Cameron's avatar Stephen M. Cameron Committed by James Bottomley

[SCSI] hpsa: factor out hpsa_find_memory_BAR

Signed-off-by: default avatarStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent 6b3f4c52
...@@ -3285,6 +3285,23 @@ static inline bool hpsa_board_disabled(struct pci_dev *pdev) ...@@ -3285,6 +3285,23 @@ static inline bool hpsa_board_disabled(struct pci_dev *pdev)
return ((command & PCI_COMMAND_MEMORY) == 0); return ((command & PCI_COMMAND_MEMORY) == 0);
} }
static int __devinit hpsa_pci_find_memory_BAR(struct ctlr_info *h,
unsigned long *memory_bar)
{
int i;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
if (pci_resource_flags(h->pdev, i) & IORESOURCE_MEM) {
/* addressing mode bits already removed */
*memory_bar = pci_resource_start(h->pdev, i);
dev_dbg(&h->pdev->dev, "memory BAR = %lx\n",
*memory_bar);
return 0;
}
dev_warn(&h->pdev->dev, "no memory BAR found\n");
return -ENODEV;
}
static int __devinit hpsa_pci_init(struct ctlr_info *h) static int __devinit hpsa_pci_init(struct ctlr_info *h)
{ {
u32 scratchpad = 0; u32 scratchpad = 0;
...@@ -3317,22 +3334,9 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h) ...@@ -3317,22 +3334,9 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
return err; return err;
} }
hpsa_interrupt_mode(h); hpsa_interrupt_mode(h);
err = hpsa_pci_find_memory_BAR(h, &h->paddr);
/* find the memory BAR */ if (err)
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if (pci_resource_flags(h->pdev, i) & IORESOURCE_MEM)
break;
}
if (i == DEVICE_COUNT_RESOURCE) {
dev_warn(&h->pdev->dev, "no memory BAR found\n");
err = -ENODEV;
goto err_out_free_res; goto err_out_free_res;
}
h->paddr = pci_resource_start(h->pdev, i); /* addressing mode bits
* already removed
*/
h->vaddr = remap_pci_mem(h->paddr, 0x250); h->vaddr = remap_pci_mem(h->paddr, 0x250);
/* Wait for the board to become ready. */ /* Wait for the board to become ready. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment