Merge http://lia64.bkbits.net/to-linus-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

arch/ia64/defconfig

@@ -48,13 +48,14 @@ CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
 # CONFIG_ITANIUM is not set
 CONFIG_MCKINLEY=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_SIM is not set
 CONFIG_IA64_HP_ZX1=y
 # CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
 # CONFIG_IA64_PAGE_SIZE_4KB is not set
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
@@ -80,15 +81,14 @@ CONFIG_HUGETLB_PAGE_SIZE_64MB=y
 # CONFIG_HUGETLB_PAGE_SIZE_256KB is not set
 # CONFIG_IA64_PAL_IDLE is not set
 CONFIG_SMP=y
+CONFIG_NR_CPUS=16
 # CONFIG_PREEMPT is not set
+CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
-CONFIG_EFI=y
 CONFIG_EFI_VARS=y
-CONFIG_NR_CPUS=16
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -140,7 +140,6 @@ CONFIG_HOTPLUG=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
@@ -179,6 +178,7 @@ CONFIG_IDE_TASKFILE_IO=y
 #
 # IDE chipset support/bugfixes
 #
+# CONFIG_IDE_GENERIC is not set
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -223,7 +223,6 @@ CONFIG_IDEDMA_AUTO=y
 #
 # I2O device support
 #
-# CONFIG_I2O is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -234,6 +233,7 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID5=m
+# CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_IOCTL_V4=y
@@ -303,9 +303,15 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -414,6 +420,7 @@ CONFIG_NET_PCI=y
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
 # CONFIG_EEPRO100_PIO is not set
@@ -539,8 +546,8 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_HCDP=y
+CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
@@ -552,24 +559,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_UNIX98_PTY_COUNT=256
 
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Algorithms
-#
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
 #
 # Mice
 #
@@ -609,6 +598,11 @@ CONFIG_DRM_RADEON=m
 # CONFIG_DRM_SIS is not set
 # CONFIG_RAW_DRIVER is not set
 
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
 #
 # Multimedia devices
 #
@@ -789,6 +783,7 @@ CONFIG_FB_RADEON=y
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
@@ -844,6 +839,7 @@ CONFIG_SND_SEQUENCER=m
 #
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_EMU10K1 is not set
@@ -927,7 +923,6 @@ CONFIG_USB_HIDDEV=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
 # CONFIG_USB_MICROTEK is not set
 # CONFIG_USB_HPUSBSCSI is not set
 
@@ -961,12 +956,19 @@ CONFIG_USB_HIDDEV=y
 #
 # USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
 # CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_BRLVGER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+
+#
+# USB Gadget Support
+#
 # CONFIG_USB_GADGET is not set
 
 #
@@ -988,10 +990,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_IA64_PRINT_HAZARDS=y
 # CONFIG_DISABLE_VHPT is not set
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_IA64_EARLY_PRINTK=y
-CONFIG_IA64_EARLY_PRINTK_UART=y
-CONFIG_IA64_EARLY_PRINTK_UART_BASE=0xff5e0000
-CONFIG_IA64_EARLY_PRINTK_VGA=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set

arch/ia64/kernel/efivars.c

@@ -29,6 +29,9 @@
  *
  * Changelog:
  *
+ *  10 Feb 2004 - Stephane Eranian <eranian@hpl.hp.com>
+ *   Provide FPSWA version number via /proc/efi/fpswa
+ *
  *  10 Dec 2002 - Matt Domsch <Matt_Domsch@dell.com>
  *   fix locking per Peter Chubb's findings
  *
@@ -70,6 +73,7 @@
 #include <linux/smp.h>
 #include <linux/efi.h>
 
+#include <asm/fpswa.h>
 #include <asm/uaccess.h>
 
 MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
@@ -407,6 +411,37 @@ static struct file_operations efi_systab_fops = {
 	.read = efi_systab_read,
 };
 
+static ssize_t
+efi_fpswa_read (struct file *file, char *buffer, size_t count, loff_t *ppos)
+{
+	ssize_t size, length;
+	char str[32];
+	void *data;
+
+	snprintf(str, sizeof(str), "revision=%u.%u\n",
+                 fpswa_interface->revision >> 16, fpswa_interface->revision & 0xffff);
+
+	length = strlen(str);
+
+	if (*ppos >= length)
+                return 0;
+
+	data = str + file->f_pos;
+	size = length - file->f_pos;
+	if (size > count)
+		size = count;
+	if (copy_to_user(buffer, data, size))
+		return -EFAULT;
+
+	*ppos += size;
+	return size;
+}
+
+static struct proc_dir_entry *efi_fpswa_entry;
+static struct file_operations efi_fpswa_fops = {
+	.read = efi_fpswa_read,
+};
+
 static int __init
 efivars_init(void)
 {
@@ -429,6 +464,12 @@ efivars_init(void)
 	if (efi_systab_entry)
 		efi_systab_entry->proc_fops = &efi_systab_fops;
 
+        if (fpswa_interface) {
+                efi_fpswa_entry = create_proc_entry("fpswa", S_IRUGO, efi_dir);
+                if (efi_fpswa_entry)
+                        efi_fpswa_entry->proc_fops = &efi_fpswa_fops;
+        }
+
 	efi_vars_dir = proc_mkdir("vars", efi_dir);
 
 	/* Per EFI spec, the maximum storage allocated for both

arch/ia64/kernel/salinfo.c

@@ -16,6 +16,9 @@
  *   Cache the record across multi-block reads from user space.
  *   Support > 64 cpus.
  *   Delete module_exit and MOD_INC/DEC_COUNT, salinfo cannot be a module.
+ *
+ * Jan 28 2004	kaos@sgi.com
+ *   Periodically check for outstanding MCA or INIT records.
  */
 
 #include <linux/types.h>
@@ -23,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
+#include <linux/timer.h>
 #include <linux/vmalloc.h>
 
 #include <asm/semaphore.h>
@@ -179,6 +183,8 @@ shift1_data_saved (struct salinfo_data *data, int shift)
 /* This routine is invoked in interrupt context.  Note: mca.c enables
  * interrupts before calling this code for CMC/CPE.  MCA and INIT events are
  * not irq safe, do not call any routines that use spinlocks, they may deadlock.
+ * MCA and INIT records are recorded, a timer event will look for any
+ * outstanding events and wake up the user space code.
  *
  * The buffer passed from mca.c points to the output from ia64_log_get. This is
  * a persistent buffer but its contents can change between the interrupt and
@@ -186,12 +192,12 @@ shift1_data_saved (struct salinfo_data *data, int shift)
  * changes.
  */
 void
-salinfo_log_wakeup(int type, u8 *buffer, u64 size)
+salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe)
 {
 	struct salinfo_data *data = salinfo_data + type;
 	struct salinfo_data_saved *data_saved;
 	unsigned long flags = 0;
-	int i, irqsafe = type != SAL_INFO_TYPE_MCA && type != SAL_INFO_TYPE_INIT;
+	int i;
 	int saved_size = ARRAY_SIZE(data->data_saved);
 
 	BUG_ON(type >= ARRAY_SIZE(salinfo_log_name));
@@ -224,6 +230,35 @@ salinfo_log_wakeup(int type, u8 *buffer, u64 size)
 	}
 }
 
+/* Check for outstanding MCA/INIT records every 5 minutes (arbitrary) */
+#define SALINFO_TIMER_DELAY (5*60*HZ)
+static struct timer_list salinfo_timer;
+
+static void
+salinfo_timeout_check(struct salinfo_data *data)
+{
+	int i;
+	if (!data->open)
+		return;
+	for (i = 0; i < NR_CPUS; ++i) {
+		if (test_bit(i, &data->cpu_event)) {
+			/* double up() is not a problem, user space will see no
+			 * records for the additional "events".
+			 */
+			up(&data->sem);
+		}
+	}
+}
+
+static void 
+salinfo_timeout (unsigned long arg)
+{
+	salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_MCA);
+	salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_INIT);
+	salinfo_timer.expires = jiffies + SALINFO_TIMER_DELAY;
+	add_timer(&salinfo_timer);
+}
+
 static int
 salinfo_event_open(struct inode *inode, struct file *file)
 {
@@ -563,6 +598,11 @@ salinfo_init(void)
 
 	*sdir++ = salinfo_dir;
 
+	init_timer(&salinfo_timer);
+	salinfo_timer.expires = jiffies + SALINFO_TIMER_DELAY;
+	salinfo_timer.function = &salinfo_timeout;
+	add_timer(&salinfo_timer);
+
 	return 0;
 }
 

arch/ia64/kernel/smpboot.c

@@ -77,7 +77,6 @@ extern void __init calibrate_delay (void);
 extern void start_ap (void);
 extern unsigned long ia64_iobase;
 
-int cpucount;
 task_t *task_for_booting_cpu;
 
 /* Bitmask of currently online CPUs */

arch/ia64/kernel/traps.c

@@ -46,21 +46,14 @@ register double f30 asm ("f30"); register double f31 asm ("f31");
 
 extern spinlock_t timerlist_lock;
 
-static fpswa_interface_t *fpswa_interface;
+fpswa_interface_t *fpswa_interface;
 
 void __init
 trap_init (void)
 {
-	int major = 0, minor = 0;
-
-	if (ia64_boot_param->fpswa) {
+	if (ia64_boot_param->fpswa)
 		/* FPSWA fixup: make the interface pointer a kernel virtual address: */
 		fpswa_interface = __va(ia64_boot_param->fpswa);
-		major = fpswa_interface->revision >> 16;
-		minor = fpswa_interface->revision & 0xffff;
-	}
-	printk(KERN_INFO "fpswa interface at %lx (rev %d.%d)\n",
-	       ia64_boot_param->fpswa, major, minor);
 }
 
 /*

arch/ia64/kernel/unaligned.c

@@ -740,6 +740,7 @@ static int
 emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 {
 	unsigned int len = 1 << ld.x6_sz;
+	unsigned long val = 0;
 
 	/*
 	 * r0, as target, doesn't need to be checked because Illegal Instruction
@@ -750,11 +751,9 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	 */
 
 	/*
-	 * ldX.a we don't try to emulate anything but we must invalidate the ALAT entry.
+	 * ldX.a we will emulate load and also invalidate the ALAT entry.
 	 * See comment below for explanation on how we handle ldX.a
 	 */
-	if (ld.x6_op != 0x2) {
-		unsigned long val = 0;
 
 	if (len != 2 && len != 4 && len != 8) {
 		DPRINT("unknown size: x6=%d\n", ld.x6_sz);
@@ -764,7 +763,6 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	if (copy_from_user(&val, (void *) ifa, len))
 		return -1;
 	setreg(ld.r1, val, 0, regs);
-	}
 
 	/*
 	 * check for updates on any kind of loads
@@ -817,7 +815,7 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	 *		store & shift to temporary;
 	 *		r1=temporary
 	 *
-	 *	  So int this case, you would get the right value is r1 but the wrong info in
+	 *	  So in this case, you would get the right value is r1 but the wrong info in
 	 *	  the ALAT.  Notice that you could do it in reverse to finish with address 3
 	 *	  but you would still get the size wrong.  To get the size right, one needs to
 	 *	  execute exactly the same kind of load. You could do it from a aligned
@@ -826,9 +824,12 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	 *	  So no matter what, it is not possible to emulate an advanced load
 	 *	  correctly. But is that really critical ?
 	 *
+	 *	  We will always convert ld.a into a normal load with ALAT invalidated.  This
+	 *	  will enable compiler to do optimization where certain code path after ld.a
+	 *	  is not required to have ld.c/chk.a, e.g., code path with no intervening stores.
 	 *
-	 *	  Now one has to look at how ld.a is used, one must either do a ld.c.* or
-	 *	  chck.a.* to reuse the value stored in the ALAT. Both can "fail" (meaning no
+	 *	  If there is a store after the advanced load, one must either do a ld.c.* or
+	 *	  chk.a.* to reuse the value stored in the ALAT. Both can "fail" (meaning no
 	 *	  entry found in ALAT), and that's perfectly ok because:
 	 *
 	 *		- ld.c.*, if the entry is not present a  normal load is executed
@@ -836,19 +837,8 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	 *
 	 *	  In either case, the load can be potentially retried in another form.
 	 *
-	 *	  So it's okay NOT to do any actual load on an unaligned ld.a. However the ALAT
-	 *	  must be invalidated for the register (so that's chck.a.*,ld.c.* don't pick up
-	 *	  a stale entry later) The register base update MUST also be performed.
-	 *
-	 *	  Now what is the content of the register and its NaT bit in the case we don't
-	 *	  do the load ?  EAS2.4, says (in case an actual load is needed)
-	 *
-	 *		- r1 = [r3], Nat = 0 if succeeds
-	 *		- r1 = 0 Nat = 0 if trying to access non-speculative memory
-	 *
-	 *	  For us, there is nothing to do, because both ld.c.* and chk.a.* are going to
-	 *	  retry and thus eventually reload the register thereby changing Nat and
-	 *	  register content.
+	 *	  ALAT must be invalidated for the register (so that chk.a or ld.c don't pick
+	 *	  up a stale entry later). The register base update MUST also be performed.
 	 */
 
 	/*

arch/ia64/lib/io.c

@@ -9,13 +9,13 @@
  * This needs to be optimized.
  */
 void
-__ia64_memcpy_fromio (void * to, unsigned long from, long count)
+__ia64_memcpy_fromio (void *to, unsigned long from, long count)
 {
+	char *dst = to;
+
 	while (count) {
 		count--;
-		*(char *) to = readb(from);
-		((char *) to)++;
-		from++;
+		*dst++ = readb(from++);
 	}
 }
 EXPORT_SYMBOL(__ia64_memcpy_fromio);
@@ -25,13 +25,13 @@ EXPORT_SYMBOL(__ia64_memcpy_fromio);
  * This needs to be optimized.
  */
 void
-__ia64_memcpy_toio (unsigned long to, void * from, long count)
+__ia64_memcpy_toio (unsigned long to, void *from, long count)
 {
+	char *src = from;
+
 	while (count) {
 		count--;
-		writeb(*(char *) from, to);
-		((char *) from)++;
-		to++;
+		writeb(*src++, to++);
 	}
 }
 EXPORT_SYMBOL(__ia64_memcpy_toio);

arch/ia64/sn/kernel/mca.c

@@ -68,20 +68,6 @@ print_hook(const char *fmt, ...)
 }
 
 
-
-/*
- * ia64_sn2_platform_plat_specific_err_print
- *
- * Called by the MCA handler to log platform-specific errors.
- */
-void
-ia64_sn2_platform_plat_specific_err_print(int header_len, int sect_len, u8 *p_data, prfunc_t prfunc)
-{
-	ia64_sn_plat_specific_err_print(print_hook, p_data - sect_len);
-}
-
-
-
 static void
 sn_cpei_handler(int irq, void *devid, struct pt_regs *regs)
 {

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2000-2003 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
  */
 
 #include <linux/init.h>
@@ -27,6 +27,8 @@
 #include <asm/delay.h>
 #include <asm/io.h>
 #include <asm/smp.h>
+#include <asm/numa.h>
+#include <asm/bitops.h>
 #include <asm/hw_irq.h>
 #include <asm/current.h>
 #include <asm/sn/sn_cpuid.h>
@@ -67,14 +69,56 @@ wait_piowc(void)
  *
  * Purges the translation caches of all processors of the given virtual address
  * range.
+ *
+ * Note:
+ * 	- cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
+ * 	- cpu_vm_mask is converted into a nodemask of the nodes containing the
+ * 	  cpus in cpu_vm_mask.
+ *	- if only one bit is set in cpu_vm_mask & it is the current cpu,
+ *	  then only the local TLB needs to be flushed. This flushing can be done
+ *	  using ptc.l. This is the common case & avoids the global spinlock.
+ *	- if multiple cpus have loaded the context, then flushing has to be
+ *	  done with ptc.g/MMRs under protection of the global ptc_lock.
  */
 
 void
 sn2_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
 {
-	int			cnode, mycnode, nasid, flushed=0;
+	int			i, cnode, mynasid, cpu, lcpu=0, nasid, flushed=0;
 	volatile unsigned	long	*ptc0, *ptc1;
 	unsigned long		flags=0, data0, data1;
+	struct mm_struct	*mm=current->active_mm;
+	short			nasids[NR_NODES], nix;
+	DECLARE_BITMAP(nodes_flushed, NR_NODES);
+
+	CLEAR_BITMAP(nodes_flushed, NR_NODES);
+
+	i = 0;
+
+	for_each_cpu_mask(cpu, mm->cpu_vm_mask) {
+		cnode = cpu_to_node(cpu);
+		__set_bit(cnode, nodes_flushed);
+		lcpu = cpu;
+		i++;
+	}
+
+	preempt_disable();
+
+	if (likely(i == 1 && lcpu == smp_processor_id())) {
+		do {
+			ia64_ptcl(start, nbits<<2);
+			start += (1UL << nbits);
+		} while (start < end);
+		ia64_srlz_i();
+		preempt_enable();
+		return;
+	}
+
+	nix = 0;
+	for (cnode=find_first_bit(&nodes_flushed, NR_NODES); cnode < NR_NODES; 
+			cnode=find_next_bit(&nodes_flushed, NR_NODES, ++cnode))
+		nasids[nix++] = cnodeid_to_nasid(cnode);
+
 
 	data0 = (1UL<<SH_PTC_0_A_SHFT) |
 		(nbits<<SH_PTC_0_PS_SHFT) |
@@ -84,20 +128,19 @@ sn2_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbit
 	ptc0 = (long*)GLOBAL_MMR_PHYS_ADDR(0, SH_PTC_0);
 	ptc1 = (long*)GLOBAL_MMR_PHYS_ADDR(0, SH_PTC_1);
 
-	mycnode = numa_node_id();
+
+	mynasid = smp_physical_node_id();
 
 	spin_lock_irqsave(&sn2_global_ptc_lock, flags);
 
 	do {
 		data1 = start | (1UL<<SH_PTC_1_START_SHFT);
-		for (cnode = 0; cnode < numnodes; cnode++) {
-			if (is_headless_node(cnode))
-				continue;
-			if (cnode == mycnode) {
+		for (i=0; i<nix; i++) {
+			nasid = nasids[i];
+			if (likely(nasid == mynasid)) {
 				ia64_ptcga(start, nbits<<2);
 				ia64_srlz_i();
 			} else {
-				nasid = cnodeid_to_nasid(cnode);
 				ptc0 = CHANGE_NASID(nasid, ptc0);
 				ptc1 = CHANGE_NASID(nasid, ptc1);
 				pio_atomic_phys_write_mmrs(ptc0, data0, ptc1, data1);
@@ -115,6 +158,7 @@ sn2_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbit
 
 	spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
 
+	preempt_enable();
 }
 
 /*

include/asm-ia64/fpswa.h

@@ -68,4 +68,6 @@ typedef struct {
 	efi_fpswa_t	 fpswa;
 } fpswa_interface_t;
 
+extern fpswa_interface_t *fpswa_interface;
+
 #endif /* _ASM_IA64_FPSWA_H */

include/asm-ia64/mca.h

@@ -2,7 +2,7 @@
  * File:	mca.h
  * Purpose:	Machine check handling specific defines
  *
- * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
  * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
  * Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
  */
@@ -20,23 +20,8 @@
 #include <asm/processor.h>
 #include <asm/mca_asm.h>
 
-/* These are the return codes from all the IA64_MCA specific interfaces */
-typedef	int ia64_mca_return_code_t;
-
-enum {
-	IA64_MCA_SUCCESS	=	0,
-	IA64_MCA_FAILURE	=	1
-};
-
 #define IA64_MCA_RENDEZ_TIMEOUT		(20 * 1000)	/* value in milliseconds - 20 seconds */
 
-#define IA64_CMC_INT_DISABLE		0
-#define IA64_CMC_INT_ENABLE		1
-
-
-typedef u32 int_vector_t;
-typedef u64 millisec_t;
-
 typedef union cmcv_reg_u {
 	u64	cmcv_regval;
 	struct	{
@@ -53,10 +38,6 @@ typedef union cmcv_reg_u {
 #define cmcv_mask		cmcv_reg_s.cmcr_mask
 #define cmcv_vector		cmcv_reg_s.cmcr_vector
 
-
-#define IA64_MCA_UCMC_HANDLER_SIZE	0x10
-#define IA64_INIT_HANDLER_SIZE		0x10
-
 enum {
 	IA64_MCA_RENDEZ_CHECKIN_NOTDONE	=	0x0,
 	IA64_MCA_RENDEZ_CHECKIN_DONE	=	0x1
@@ -85,16 +66,6 @@ typedef struct ia64_mc_info_s {
 
 } ia64_mc_info_t;
 
-/* Possible rendez states passed from SAL to OS during MCA
- * handoff
- */
-enum {
-	IA64_MCA_RENDEZ_NOT_RQD		=	0x0,
-	IA64_MCA_RENDEZ_DONE_WITHOUT_INIT	=	0x1,
-	IA64_MCA_RENDEZ_DONE_WITH_INIT		=	0x2,
-	IA64_MCA_RENDEZ_FAILURE			=	-1
-};
-
 typedef struct ia64_mca_sal_to_os_state_s {
 	u64		imsto_os_gp;		/* GP of the os registered with the SAL */
 	u64		imsto_pal_proc;		/* PAL_PROC entry point - physical addr */
@@ -136,41 +107,14 @@ typedef struct ia64_mca_os_to_sal_state_s {
 						 */
 } ia64_mca_os_to_sal_state_t;
 
-typedef int (*prfunc_t)(const char * fmt, ...);
-
 extern void ia64_mca_init(void);
 extern void ia64_os_mca_dispatch(void);
 extern void ia64_os_mca_dispatch_end(void);
 extern void ia64_mca_ucmc_handler(void);
 extern void ia64_monarch_init_handler(void);
 extern void ia64_slave_init_handler(void);
-extern irqreturn_t ia64_mca_rendez_int_handler(int,void *,struct pt_regs *);
-extern irqreturn_t ia64_mca_wakeup_int_handler(int,void *,struct pt_regs *);
-extern irqreturn_t ia64_mca_cmc_int_handler(int,void *,struct pt_regs *);
-extern irqreturn_t ia64_mca_cmc_int_caller(int,void *,struct pt_regs *);
-extern irqreturn_t ia64_mca_cpe_int_handler(int,void *,struct pt_regs *);
-extern irqreturn_t ia64_mca_cpe_int_caller(int,void *,struct pt_regs *);
-extern int  ia64_log_print(int,prfunc_t);
 extern void ia64_mca_cmc_vector_setup(void);
 extern int  ia64_mca_check_errors(void);
 
-#define PLATFORM_CALL(fn, args)	printk("Platform call TBD\n")
-
-#define platform_mem_dev_err_print ia64_log_prt_oem_data
-#define platform_pci_bus_err_print ia64_log_prt_oem_data
-#define platform_pci_comp_err_print ia64_log_prt_oem_data
-#define platform_plat_specific_err_print ia64_log_prt_oem_data
-#define platform_host_ctlr_err_print ia64_log_prt_oem_data
-#define platform_plat_bus_err_print ia64_log_prt_oem_data
-
-#undef	MCA_TEST
-
-#undef IA64_MCA_DEBUG_INFO
-
-#if defined(IA64_MCA_DEBUG_INFO)
-# define IA64_MCA_DEBUG(fmt...)	printk(fmt)
-#else
-# define IA64_MCA_DEBUG(fmt...)
-#endif
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_IA64_MCA_H */

include/asm-ia64/mmu_context.h

@@ -106,6 +106,7 @@ get_mmu_context (struct mm_struct *mm)
 		/* re-check, now that we've got the lock: */
 		context = mm->context;
 		if (context == 0) {
+			cpus_clear(mm->cpu_vm_mask);
 			if (ia64_ctx.next >= ia64_ctx.limit)
 				wrap_mmu_context(mm);
 			mm->context = context = ia64_ctx.next++;
@@ -170,6 +171,8 @@ activate_context (struct mm_struct *mm)
 	do {
 		context = get_mmu_context(mm);
 		MMU_TRACE('A', smp_processor_id(), mm, context);
+		if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+			cpu_set(smp_processor_id(), mm->cpu_vm_mask);
 		reload_context(context);
 		MMU_TRACE('a', smp_processor_id(), mm, context);
 		/* in the unlikely event of a TLB-flush by another thread, redo the load: */

include/asm-ia64/percpu.h

@@ -50,7 +50,7 @@ extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define per_cpu(var, cpu)			((void)cpu, per_cpu__##var)
+#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
 #define __get_cpu_var(var)			per_cpu__##var
 #define per_cpu_init()				(__phys_per_cpu_start)
 

include/asm-ia64/processor.h

@@ -294,7 +294,7 @@ struct thread_struct {
 	.on_ustack =	0,					\
 	.ksp =		0,					\
 	.map_base =	DEFAULT_MAP_BASE,			\
-	.rbs_bot =	DEFAULT_USER_STACK_SIZE,	\
+	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
 	.task_size =	DEFAULT_TASK_SIZE,			\
 	.last_fph_cpu =  -1,					\
 	INIT_THREAD_IA32					\