Skip to content

L
linux
Commit 406910a8 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-03-20

This series contains updates to i40e and i40evf only.

Philippe Reynes updates i40e and i40evf to use the new ethtool API for
{get|set}_link_ksettings.

Jake provides the remaining patches in the series, starting with a fix
for i40e where the firmware expected the port numbers for the offloaded
UDP tunnels in Little Endian format and we were sending them in Big Endian
format which put the wrong port number to be put in the UDP tunnel list.
Changed the driver to use __be32 values instead of arrays for
(src|dst)_ip.  Refactored the exit flow of i40e_add_fdir_ethtool() which
removes the dependency on having a non-zero return value.  Fixed a memory
leak by running kfree() and returning immediately when we fail to add
flow director filter.  Fixed a potential issue where could update the
filter count without actually succeeding in adding a filter, by moving
the ATR exit check to after we have sent the TCP/IPv4 filter to the ring
successfully.  Ensures that the fd_tcp_rule count is reset to 0, before
we reprogram the filters so that we do not end up with a stale count
which does not correctly reflect the number of programmed filters.  Added
a check whether we have TCP/IPv4 filters before re-enabling ATR after
flushing and replaying FDIR filters.  Added counters for each filter
type in preparation for adding code to properly check the mask value.
Fixed potential issues by explicitly checking the flow type at the
start of i40e_add_fdir_ethtool().  To avoid possible memory leaks,
we now unconditionally delete the old filter, even if it is identical to
the new filter and ensures will always update the filters as expected.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 41e95736 c6da525d
Hide whitespace changes
Inline Side-by-side
Showing with 273 additions and 224 deletions
drivers/net/ethernet/intel/i40e/i40e.h
View file @ 406910a8
......@@ -208,8 +208,8 @@ struct i40e_fdir_filter {
u8 flow_type;
u8 ip4_proto;
/* TX packet view of src and dst */
__be32 dst_ip[4];
__be32 src_ip[4];
__be32 dst_ip;
__be32 src_ip;
__be16 src_port;
__be16 dst_port;
__be32 sctp_v_tag;
......@@ -244,7 +244,8 @@ struct i40e_tc_configuration {
};
struct i40e_udp_port_config {
__be16 index;
/* AdminQ command interface expects port number in Host byte order */
u16 index;
u8 type;
};
......@@ -285,7 +286,14 @@ struct i40e_pf {
u32 fd_flush_cnt;
u32 fd_add_err;
u32 fd_atr_cnt;
u32 fd_tcp_rule;
/* Book-keeping of side-band filter count per flow-type.
* This is used to detect and handle input set changes for
* respective flow-type.
*/
u16 fd_tcp4_filter_cnt;
u16 fd_udp4_filter_cnt;
u16 fd_ip4_filter_cnt;
struct i40e_udp_port_config udp_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];
u16 pending_udp_bitmap;
......
drivers/net/ethernet/intel/i40e/i40e_ethtool.c
View file @ 406910a8
......@@ -387,7 +387,7 @@ static void i40e_phy_type_to_ethtool(struct i40e_pf *pf, u32 *supported,
*
**/
static void i40e_get_settings_link_up(struct i40e_hw *hw,
struct ethtool_cmd *ecmd,
struct ethtool_link_ksettings *cmd,
struct net_device *netdev,
struct i40e_pf *pf)
{
......@@ -395,90 +395,96 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
u32 link_speed = hw_link_info->link_speed;
u32 e_advertising = 0x0;
u32 e_supported = 0x0;
u32 supported, advertising;
ethtool_convert_link_mode_to_legacy_u32(&supported,
cmd->link_modes.supported);
ethtool_convert_link_mode_to_legacy_u32(&advertising,
cmd->link_modes.advertising);
/* Initialize supported and advertised settings based on phy settings */
switch (hw_link_info->phy_type) {
case I40E_PHY_TYPE_40GBASE_CR4:
case I40E_PHY_TYPE_40GBASE_CR4_CU:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_40000baseCR4_Full;
ecmd->advertising = ADVERTISED_Autoneg |
ADVERTISED_40000baseCR4_Full;
supported = SUPPORTED_Autoneg |
SUPPORTED_40000baseCR4_Full;
advertising = ADVERTISED_Autoneg |
ADVERTISED_40000baseCR4_Full;
break;
case I40E_PHY_TYPE_XLAUI:
case I40E_PHY_TYPE_XLPPI:
case I40E_PHY_TYPE_40GBASE_AOC:
ecmd->supported = SUPPORTED_40000baseCR4_Full;
supported = SUPPORTED_40000baseCR4_Full;
break;
case I40E_PHY_TYPE_40GBASE_SR4:
ecmd->supported = SUPPORTED_40000baseSR4_Full;
supported = SUPPORTED_40000baseSR4_Full;
break;
case I40E_PHY_TYPE_40GBASE_LR4:
ecmd->supported = SUPPORTED_40000baseLR4_Full;
supported = SUPPORTED_40000baseLR4_Full;
break;
case I40E_PHY_TYPE_10GBASE_SR:
case I40E_PHY_TYPE_10GBASE_LR:
case I40E_PHY_TYPE_1000BASE_SX:
case I40E_PHY_TYPE_1000BASE_LX:
ecmd->supported = SUPPORTED_10000baseT_Full;
supported = SUPPORTED_10000baseT_Full;
if (hw_link_info->module_type[2] &
I40E_MODULE_TYPE_1000BASE_SX ||
hw_link_info->module_type[2] &
I40E_MODULE_TYPE_1000BASE_LX) {
ecmd->supported |= SUPPORTED_1000baseT_Full;
supported |= SUPPORTED_1000baseT_Full;
if (hw_link_info->requested_speeds &
I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
advertising |= ADVERTISED_1000baseT_Full;
}
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
ecmd->advertising |= ADVERTISED_10000baseT_Full;
advertising |= ADVERTISED_10000baseT_Full;
break;
case I40E_PHY_TYPE_10GBASE_T:
case I40E_PHY_TYPE_1000BASE_T:
case I40E_PHY_TYPE_100BASE_TX:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg;
supported = SUPPORTED_Autoneg |
SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
advertising = ADVERTISED_Autoneg;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
ecmd->advertising |= ADVERTISED_10000baseT_Full;
advertising |= ADVERTISED_10000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
advertising |= ADVERTISED_1000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
ecmd->advertising |= ADVERTISED_100baseT_Full;
advertising |= ADVERTISED_100baseT_Full;
break;
case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg |
ADVERTISED_1000baseT_Full;
supported = SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full;
advertising = ADVERTISED_Autoneg |
ADVERTISED_1000baseT_Full;
break;
case I40E_PHY_TYPE_10GBASE_CR1_CU:
case I40E_PHY_TYPE_10GBASE_CR1:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_10000baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg |
ADVERTISED_10000baseT_Full;
supported = SUPPORTED_Autoneg |
SUPPORTED_10000baseT_Full;
advertising = ADVERTISED_Autoneg |
ADVERTISED_10000baseT_Full;
break;
case I40E_PHY_TYPE_XAUI:
case I40E_PHY_TYPE_XFI:
case I40E_PHY_TYPE_SFI:
case I40E_PHY_TYPE_10GBASE_SFPP_CU:
case I40E_PHY_TYPE_10GBASE_AOC:
ecmd->supported = SUPPORTED_10000baseT_Full;
ecmd->advertising = SUPPORTED_10000baseT_Full;
supported = SUPPORTED_10000baseT_Full;
advertising = SUPPORTED_10000baseT_Full;
break;
case I40E_PHY_TYPE_SGMII:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full;
supported = SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
advertising |= ADVERTISED_1000baseT_Full;
if (pf->flags & I40E_FLAG_100M_SGMII_CAPABLE) {
ecmd->supported |= SUPPORTED_100baseT_Full;
supported |= SUPPORTED_100baseT_Full;
if (hw_link_info->requested_speeds &
I40E_LINK_SPEED_100MB)
ecmd->advertising |= ADVERTISED_100baseT_Full;
advertising |= ADVERTISED_100baseT_Full;
}
break;
case I40E_PHY_TYPE_40GBASE_KR4:
......@@ -486,25 +492,25 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
case I40E_PHY_TYPE_10GBASE_KR:
case I40E_PHY_TYPE_10GBASE_KX4:
case I40E_PHY_TYPE_1000BASE_KX:
ecmd->supported |= SUPPORTED_40000baseKR4_Full |
SUPPORTED_20000baseKR2_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_10000baseKX4_Full |
SUPPORTED_1000baseKX_Full |
SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_40000baseKR4_Full |
ADVERTISED_20000baseKR2_Full |
ADVERTISED_10000baseKR_Full |
ADVERTISED_10000baseKX4_Full |
ADVERTISED_1000baseKX_Full |
ADVERTISED_Autoneg;
supported |= SUPPORTED_40000baseKR4_Full |
SUPPORTED_20000baseKR2_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_10000baseKX4_Full |
SUPPORTED_1000baseKX_Full |
SUPPORTED_Autoneg;
advertising |= ADVERTISED_40000baseKR4_Full |
ADVERTISED_20000baseKR2_Full |
ADVERTISED_10000baseKR_Full |
ADVERTISED_10000baseKX4_Full |
ADVERTISED_1000baseKX_Full |
ADVERTISED_Autoneg;
break;
case I40E_PHY_TYPE_25GBASE_KR:
case I40E_PHY_TYPE_25GBASE_CR:
case I40E_PHY_TYPE_25GBASE_SR:
case I40E_PHY_TYPE_25GBASE_LR:
ecmd->supported = SUPPORTED_Autoneg;
ecmd->advertising = ADVERTISED_Autoneg;
supported = SUPPORTED_Autoneg;
advertising = ADVERTISED_Autoneg;
/* TODO: add speeds when ethtool is ready to support*/
break;
default:
......@@ -520,38 +526,43 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
i40e_phy_type_to_ethtool(pf, &e_supported,
&e_advertising);
ecmd->supported = ecmd->supported & e_supported;
ecmd->advertising = ecmd->advertising & e_advertising;
supported = supported & e_supported;
advertising = advertising & e_advertising;
/* Set speed and duplex */
switch (link_speed) {
case I40E_LINK_SPEED_40GB:
ethtool_cmd_speed_set(ecmd, SPEED_40000);
cmd->base.speed = SPEED_40000;
break;
case I40E_LINK_SPEED_25GB:
#ifdef SPEED_25000
ethtool_cmd_speed_set(ecmd, SPEED_25000);
cmd->base.speed = SPEED_25000;
#else
netdev_info(netdev,
"Speed is 25G, display not supported by this version of ethtool.\n");
#endif
break;
case I40E_LINK_SPEED_20GB:
ethtool_cmd_speed_set(ecmd, SPEED_20000);
cmd->base.speed = SPEED_20000;
break;
case I40E_LINK_SPEED_10GB:
ethtool_cmd_speed_set(ecmd, SPEED_10000);
cmd->base.speed = SPEED_10000;
break;
case I40E_LINK_SPEED_1GB:
ethtool_cmd_speed_set(ecmd, SPEED_1000);
cmd->base.speed = SPEED_1000;
break;
case I40E_LINK_SPEED_100MB:
ethtool_cmd_speed_set(ecmd, SPEED_100);
cmd->base.speed = SPEED_100;
break;
default:
break;
}
ecmd->duplex = DUPLEX_FULL;
cmd->base.duplex = DUPLEX_FULL;
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
}
/**
......@@ -562,18 +573,24 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
* Reports link settings that can be determined when link is down
**/
static void i40e_get_settings_link_down(struct i40e_hw *hw,
struct ethtool_cmd *ecmd,
struct ethtool_link_ksettings *cmd,
struct i40e_pf *pf)
{
u32 supported, advertising;
/* link is down and the driver needs to fall back on
* supported phy types to figure out what info to display
*/
i40e_phy_type_to_ethtool(pf, &ecmd->supported,
&ecmd->advertising);
i40e_phy_type_to_ethtool(pf, &supported, &advertising);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
/* With no link speed and duplex are unknown */
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
cmd->base.speed = SPEED_UNKNOWN;
cmd->base.duplex = DUPLEX_UNKNOWN;
}
/**
......@@ -583,74 +600,85 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw,
*
* Reports speed/duplex settings based on media_type
**/
static int i40e_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
static int i40e_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_pf *pf = np->vsi->back;
struct i40e_hw *hw = &pf->hw;
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
u32 advertising;
if (link_up)
i40e_get_settings_link_up(hw, ecmd, netdev, pf);
i40e_get_settings_link_up(hw, cmd, netdev, pf);
else
i40e_get_settings_link_down(hw, ecmd, pf);
i40e_get_settings_link_down(hw, cmd, pf);
/* Now set the settings that don't rely on link being up/down */
/* Set autoneg settings */
ecmd->autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
cmd->base.autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
AUTONEG_ENABLE : AUTONEG_DISABLE);
switch (hw->phy.media_type) {
case I40E_MEDIA_TYPE_BACKPLANE:
ecmd->supported |= SUPPORTED_Autoneg |
SUPPORTED_Backplane;
ecmd->advertising |= ADVERTISED_Autoneg |
ADVERTISED_Backplane;
ecmd->port = PORT_NONE;
ethtool_link_ksettings_add_link_mode(cmd, supported,
Autoneg);
ethtool_link_ksettings_add_link_mode(cmd, supported,
Backplane);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Autoneg);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Backplane);
cmd->base.port = PORT_NONE;
break;
case I40E_MEDIA_TYPE_BASET:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
cmd->base.port = PORT_TP;
break;
case I40E_MEDIA_TYPE_DA:
case I40E_MEDIA_TYPE_CX4:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_DA;
ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
cmd->base.port = PORT_DA;
break;
case I40E_MEDIA_TYPE_FIBER:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->port = PORT_FIBRE;
ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
cmd->base.port = PORT_FIBRE;
break;
case I40E_MEDIA_TYPE_UNKNOWN:
default:
ecmd->port = PORT_OTHER;
cmd->base.port = PORT_OTHER;
break;
}
/* Set transceiver */
ecmd->transceiver = XCVR_EXTERNAL;
/* Set flow control settings */
ecmd->supported |= SUPPORTED_Pause;
ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
switch (hw->fc.requested_mode) {
case I40E_FC_FULL:
ecmd->advertising |= ADVERTISED_Pause;
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Pause);
break;
case I40E_FC_TX_PAUSE:
ecmd->advertising |= ADVERTISED_Asym_Pause;
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Asym_Pause);
break;
case I40E_FC_RX_PAUSE:
ecmd->advertising |= (ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Pause);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
Asym_Pause);
break;
default:
ecmd->advertising &= ~(ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
ethtool_convert_link_mode_to_legacy_u32(
&advertising, cmd->link_modes.advertising);
advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
ethtool_convert_legacy_u32_to_link_mode(
cmd->link_modes.advertising, advertising);
break;
}
......@@ -664,8 +692,8 @@ static int i40e_get_settings(struct net_device *netdev,
*
* Set speed/duplex per media_types advertised/forced
**/
static int i40e_set_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
static int i40e_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_aq_get_phy_abilities_resp abilities;
......@@ -673,12 +701,14 @@ static int i40e_set_settings(struct net_device *netdev,
struct i40e_pf *pf = np->vsi->back;
struct i40e_vsi *vsi = np->vsi;
struct i40e_hw *hw = &pf->hw;
struct ethtool_cmd safe_ecmd;
struct ethtool_link_ksettings safe_cmd;
struct ethtool_link_ksettings copy_cmd;
i40e_status status = 0;
bool change = false;
int err = 0;
u8 autoneg;
u32 autoneg;
u32 advertise;
u32 tmp;
/* Changing port settings is not supported if this isn't the
* port's controlling PF
......@@ -706,23 +736,31 @@ static int i40e_set_settings(struct net_device *netdev,
return -EOPNOTSUPP;
}
/* copy the cmd to copy_cmd to avoid modifying the origin */
memcpy(&copy_cmd, cmd, sizeof(struct ethtool_link_ksettings));
/* get our own copy of the bits to check against */
memset(&safe_ecmd, 0, sizeof(struct ethtool_cmd));
i40e_get_settings(netdev, &safe_ecmd);
memset(&safe_cmd, 0, sizeof(struct ethtool_link_ksettings));
i40e_get_link_ksettings(netdev, &safe_cmd);
/* save autoneg and speed out of ecmd */
autoneg = ecmd->autoneg;
advertise = ecmd->advertising;
/* save autoneg and speed out of cmd */
autoneg = cmd->base.autoneg;
ethtool_convert_link_mode_to_legacy_u32(&advertise,
cmd->link_modes.advertising);
/* set autoneg and speed back to what they currently are */
ecmd->autoneg = safe_ecmd.autoneg;
ecmd->advertising = safe_ecmd.advertising;
copy_cmd.base.autoneg = safe_cmd.base.autoneg;
ethtool_convert_link_mode_to_legacy_u32(
&tmp, safe_cmd.link_modes.advertising);
ethtool_convert_legacy_u32_to_link_mode(
copy_cmd.link_modes.advertising, tmp);
copy_cmd.base.cmd = safe_cmd.base.cmd;
ecmd->cmd = safe_ecmd.cmd;
/* If ecmd and safe_ecmd are not the same now, then they are
/* If copy_cmd and safe_cmd are not the same now, then they are
* trying to set something that we do not support
*/
if (memcmp(ecmd, &safe_ecmd, sizeof(struct ethtool_cmd)))
if (memcmp(&copy_cmd, &safe_cmd, sizeof(struct ethtool_link_ksettings)))
return -EOPNOTSUPP;
while (test_bit(__I40E_CONFIG_BUSY, &vsi->state))
......@@ -745,7 +783,8 @@ static int i40e_set_settings(struct net_device *netdev,
/* If autoneg was not already enabled */
if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
/* If autoneg is not supported, return error */
if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
if (!ethtool_link_ksettings_test_link_mode(
&safe_cmd, supported, Autoneg)) {
netdev_info(netdev, "Autoneg not supported on this phy\n");
return -EINVAL;
}
......@@ -760,7 +799,8 @@ static int i40e_set_settings(struct net_device *netdev,
/* If autoneg is supported 10GBASE_T is the only PHY
* that can disable it, so otherwise return error
*/
if (safe_ecmd.supported & SUPPORTED_Autoneg &&
if (ethtool_link_ksettings_test_link_mode(
&safe_cmd, supported, Autoneg) &&
hw->phy.link_info.phy_type !=
I40E_PHY_TYPE_10GBASE_T) {
netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
......@@ -773,7 +813,9 @@ static int i40e_set_settings(struct net_device *netdev,
}
}
if (advertise & ~safe_ecmd.supported)
ethtool_convert_link_mode_to_legacy_u32(&tmp,
safe_cmd.link_modes.supported);
if (advertise & ~tmp)
return -EINVAL;
if (advertise & ADVERTISED_100baseT_Full)
......@@ -2364,8 +2406,8 @@ static int i40e_get_ethtool_fdir_entry(struct i40e_pf *pf,
*/
fsp->h_u.tcp_ip4_spec.psrc = rule->dst_port;
fsp->h_u.tcp_ip4_spec.pdst = rule->src_port;
fsp->h_u.tcp_ip4_spec.ip4src = rule->dst_ip[0];
fsp->h_u.tcp_ip4_spec.ip4dst = rule->src_ip[0];
fsp->h_u.tcp_ip4_spec.ip4src = rule->dst_ip;
fsp->h_u.tcp_ip4_spec.ip4dst = rule->src_ip;
if (rule->dest_ctl == I40E_FILTER_PROGRAM_DESC_DEST_DROP_PACKET)
fsp->ring_cookie = RX_CLS_FLOW_DISC;
......@@ -2578,24 +2620,6 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
return 0;
}
/**
* i40e_match_fdir_input_set - Match a new filter against an existing one
* @rule: The filter already added
* @input: The new filter to comapre against
*
* Returns true if the two input set match
**/
static bool i40e_match_fdir_input_set(struct i40e_fdir_filter *rule,
struct i40e_fdir_filter *input)
{
if ((rule->dst_ip[0] != input->dst_ip[0]) ||
(rule->src_ip[0] != input->src_ip[0]) ||
(rule->dst_port != input->dst_port) ||
(rule->src_port != input->src_port))
return false;
return true;
}
/**
* i40e_update_ethtool_fdir_entry - Updates the fdir filter entry
* @vsi: Pointer to the targeted VSI
......@@ -2631,22 +2655,22 @@ static int i40e_update_ethtool_fdir_entry(struct i40e_vsi *vsi,
/* if there is an old rule occupying our place remove it */
if (rule && (rule->fd_id == sw_idx)) {
if (input && !i40e_match_fdir_input_set(rule, input))
err = i40e_add_del_fdir(vsi, rule, false);
else if (!input)
err = i40e_add_del_fdir(vsi, rule, false);
/* Remove this rule, since we're either deleting it, or
* replacing it.
*/
err = i40e_add_del_fdir(vsi, rule, false);
hlist_del(&rule->fdir_node);
kfree(rule);
pf->fdir_pf_active_filters--;
}
/* If no input this was a delete, err should be 0 if a rule was
* successfully found and removed from the list else -EINVAL
/* If we weren't given an input, this is a delete, so just return the
* error code indicating if there was an entry at the requested slot
*/
if (!input)
return err;
/* initialize node and set software index */
/* Otherwise, install the new rule as requested */
INIT_HLIST_NODE(&input->fdir_node);
/* add filter to the list */
......@@ -2729,6 +2753,10 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
/* Extended MAC field is not supported */
if (fsp->flow_type & FLOW_MAC_EXT)
return -EINVAL;
if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
pf->hw.func_caps.fd_filters_guaranteed)) {
return -EINVAL;
......@@ -2765,8 +2793,8 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
*/
input->dst_port = fsp->h_u.tcp_ip4_spec.psrc;
input->src_port = fsp->h_u.tcp_ip4_spec.pdst;
input->dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
input->src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
input->dst_ip = fsp->h_u.tcp_ip4_spec.ip4src;
input->src_ip = fsp->h_u.tcp_ip4_spec.ip4dst;
if (ntohl(fsp->m_ext.data[1])) {
vf_id = ntohl(fsp->h_ext.data[1]);
......@@ -2786,12 +2814,19 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
}
ret = i40e_add_del_fdir(vsi, input, true);
free_input:
if (ret)
kfree(input);
else
i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
goto free_input;
/* Add the input filter to the fdir_input_list, possibly replacing
* a previous filter. Do not free the input structure after adding it
* to the list as this would cause a use-after-free bug.
*/
i40e_update_ethtool_fdir_entry(vsi, input, fsp->location, NULL);
return 0;
free_input:
kfree(input);
return ret;
}
......@@ -3156,8 +3191,6 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
}
static const struct ethtool_ops i40e_ethtool_ops = {
.get_settings = i40e_get_settings,
.set_settings = i40e_set_settings,
.get_drvinfo = i40e_get_drvinfo,
.get_regs_len = i40e_get_regs_len,
.get_regs = i40e_get_regs,
......@@ -3194,6 +3227,8 @@ static const struct ethtool_ops i40e_ethtool_ops = {
.set_priv_flags = i40e_set_priv_flags,
.get_per_queue_coalesce = i40e_get_per_queue_coalesce,
.set_per_queue_coalesce = i40e_set_per_queue_coalesce,
.get_link_ksettings = i40e_get_link_ksettings,
.set_link_ksettings = i40e_set_link_ksettings,
};
void i40e_set_ethtool_ops(struct net_device *netdev)
......
drivers/net/ethernet/intel/i40e/i40e_main.c
View file @ 406910a8
......@@ -3283,6 +3283,11 @@ static void i40e_fdir_filter_restore(struct i40e_vsi *vsi)
if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
return;
/* Reset FDir counters as we're replaying all existing filters */
pf->fd_tcp4_filter_cnt = 0;
pf->fd_udp4_filter_cnt = 0;
pf->fd_ip4_filter_cnt = 0;
hlist_for_each_entry_safe(filter, node,
&pf->fdir_filter_list, fdir_node) {
i40e_add_del_fdir(vsi, filter, true);
......@@ -5465,13 +5470,8 @@ static int i40e_up_complete(struct i40e_vsi *vsi)
/* replay FDIR SB filters */
if (vsi->type == I40E_VSI_FDIR) {
/* reset fd counters */
pf->fd_add_err = pf->fd_atr_cnt = 0;
if (pf->fd_tcp_rule > 0) {
pf->hw_disabled_flags |= I40E_FLAG_FD_ATR_ENABLED;
if (I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 exist\n");
pf->fd_tcp_rule = 0;
}
pf->fd_add_err = 0;
pf->fd_atr_cnt = 0;
i40e_fdir_filter_restore(vsi);
}
......@@ -5754,7 +5754,11 @@ static void i40e_fdir_filter_exit(struct i40e_pf *pf)
hlist_del(&filter->fdir_node);
kfree(filter);
}
pf->fdir_pf_active_filters = 0;
pf->fd_tcp4_filter_cnt = 0;
pf->fd_udp4_filter_cnt = 0;
pf->fd_ip4_filter_cnt = 0;
}
/**
......@@ -6159,7 +6163,7 @@ void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {
if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
(pf->hw_disabled_flags & I40E_FLAG_FD_ATR_ENABLED) &&
(pf->fd_tcp_rule == 0)) {
(pf->fd_tcp4_filter_cnt == 0)) {
pf->hw_disabled_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
if (I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table and there are no conflicting ntuple rules\n");
......@@ -6231,7 +6235,7 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
} else {
/* replay sideband filters */
i40e_fdir_filter_restore(pf->vsi[pf->lan_vsi]);
if (!disable_atr)
if (!disable_atr && !pf->fd_tcp4_filter_cnt)
pf->hw_disabled_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
clear_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
if (I40E_DEBUG_FD & pf->hw.debug_mask)
......@@ -7353,7 +7357,7 @@ static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf)
{
struct i40e_hw *hw = &pf->hw;
i40e_status ret;
__be16 port;
u16 port;
int i;
if (!(pf->flags & I40E_FLAG_UDP_FILTER_SYNC))
......@@ -7377,7 +7381,7 @@ static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf)
"%s %s port %d, index %d failed, err %s aq_err %s\n",
pf->udp_ports[i].type ? "vxlan" : "geneve",
port ? "add" : "delete",
ntohs(port), i,
port, i,
i40e_stat_str(&pf->hw, ret),
i40e_aq_str(&pf->hw,
pf->hw.aq.asq_last_status));
......@@ -8940,8 +8944,8 @@ bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
pf->hw_disabled_flags &= ~I40E_FLAG_FD_SB_ENABLED;
/* reset fd counters */
pf->fd_add_err = pf->fd_atr_cnt = pf->fd_tcp_rule = 0;
pf->fdir_pf_active_filters = 0;
pf->fd_add_err = 0;
pf->fd_atr_cnt = 0;
/* if ATR was auto disabled it can be re-enabled. */
if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
(pf->hw_disabled_flags & I40E_FLAG_FD_ATR_ENABLED)) {
......@@ -9014,7 +9018,7 @@ static int i40e_set_features(struct net_device *netdev,
*
* Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found
**/
static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port)
static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, u16 port)
{
u8 i;
......@@ -9037,7 +9041,7 @@ static void i40e_udp_tunnel_add(struct net_device *netdev,
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
__be16 port = ti->port;
u16 port = ntohs(ti->port);
u8 next_idx;
u8 idx;
......@@ -9045,8 +9049,7 @@ static void i40e_udp_tunnel_add(struct net_device *netdev,
/* Check if port already exists */
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
netdev_info(netdev, "port %d already offloaded\n",
ntohs(port));
netdev_info(netdev, "port %d already offloaded\n", port);
return;
}
......@@ -9055,7 +9058,7 @@ static void i40e_udp_tunnel_add(struct net_device *netdev,
if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
netdev_info(netdev, "maximum number of offloaded UDP ports reached, not adding port %d\n",
ntohs(port));
port);
return;
}
......@@ -9089,7 +9092,7 @@ static void i40e_udp_tunnel_del(struct net_device *netdev,
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
__be16 port = ti->port;
u16 port = ntohs(ti->port);
u8 idx;
idx = i40e_get_udp_port_idx(pf, port);
......@@ -9121,7 +9124,7 @@ static void i40e_udp_tunnel_del(struct net_device *netdev,
return;
not_found:
netdev_warn(netdev, "UDP port %d was not found, not deleting\n",
ntohs(port));
port);
}
static int i40e_get_phys_port_id(struct net_device *netdev,
......
drivers/net/ethernet/intel/i40e/i40e_txrx.c
View file @ 406910a8
......@@ -203,7 +203,6 @@ static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
struct i40e_pf *pf = vsi->back;
struct udphdr *udp;
struct iphdr *ip;
bool err = false;
u8 *raw_packet;
int ret;
static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
......@@ -219,9 +218,9 @@ static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
udp = (struct udphdr *)(raw_packet + IP_HEADER_OFFSET
+ sizeof(struct iphdr));
ip->daddr = fd_data->dst_ip[0];
ip->daddr = fd_data->dst_ip;
udp->dest = fd_data->dst_port;
ip->saddr = fd_data->src_ip[0];
ip->saddr = fd_data->src_ip;
udp->source = fd_data->src_port;
fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
......@@ -230,7 +229,9 @@ static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
dev_info(&pf->pdev->dev,
"PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
fd_data->pctype, fd_data->fd_id, ret);
err = true;
/* Free the packet buffer since it wasn't added to the ring */
kfree(raw_packet);
return -EOPNOTSUPP;
} else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
if (add)
dev_info(&pf->pdev->dev,
......@@ -241,10 +242,13 @@ static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
"Filter deleted for PCTYPE %d loc = %d\n",
fd_data->pctype, fd_data->fd_id);
}
if (err)
kfree(raw_packet);
return err ? -EOPNOTSUPP : 0;
if (add)
pf->fd_udp4_filter_cnt++;
else
pf->fd_udp4_filter_cnt--;
return 0;
}
#define I40E_TCPIP_DUMMY_PACKET_LEN 54
......@@ -263,7 +267,6 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
struct i40e_pf *pf = vsi->back;
struct tcphdr *tcp;
struct iphdr *ip;
bool err = false;
u8 *raw_packet;
int ret;
/* Dummy packet */
......@@ -281,36 +284,20 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
tcp = (struct tcphdr *)(raw_packet + IP_HEADER_OFFSET
+ sizeof(struct iphdr));
ip->daddr = fd_data->dst_ip[0];
ip->daddr = fd_data->dst_ip;
tcp->dest = fd_data->dst_port;
ip->saddr = fd_data->src_ip[0];
ip->saddr = fd_data->src_ip;
tcp->source = fd_data->src_port;
if (add) {
pf->fd_tcp_rule++;
if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
pf->hw_disabled_flags |= I40E_FLAG_FD_ATR_ENABLED;
} else {
pf->fd_tcp_rule = (pf->fd_tcp_rule > 0) ?
(pf->fd_tcp_rule - 1) : 0;
if (pf->fd_tcp_rule == 0) {
if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "ATR re-enabled due to no sideband TCP/IPv4 rules\n");
pf->hw_disabled_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
}
}
fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
if (ret) {
dev_info(&pf->pdev->dev,
"PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
fd_data->pctype, fd_data->fd_id, ret);
err = true;
/* Free the packet buffer since it wasn't added to the ring */
kfree(raw_packet);
return -EOPNOTSUPP;
} else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
if (add)
dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d loc = %d)\n",
......@@ -321,10 +308,23 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
fd_data->pctype, fd_data->fd_id);
}
if (err)
kfree(raw_packet);
if (add) {
pf->fd_tcp4_filter_cnt++;
if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
pf->hw_disabled_flags |= I40E_FLAG_FD_ATR_ENABLED;
} else {
pf->fd_tcp4_filter_cnt--;
if (pf->fd_tcp4_filter_cnt == 0) {
if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "ATR re-enabled due to no sideband TCP/IPv4 rules\n");
pf->hw_disabled_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
}
}
return err ? -EOPNOTSUPP : 0;
return 0;
}
#define I40E_IP_DUMMY_PACKET_LEN 34
......@@ -343,7 +343,6 @@ static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
{
struct i40e_pf *pf = vsi->back;
struct iphdr *ip;
bool err = false;
u8 *raw_packet;
int ret;
int i;
......@@ -359,18 +358,21 @@ static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
memcpy(raw_packet, packet, I40E_IP_DUMMY_PACKET_LEN);
ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
ip->saddr = fd_data->src_ip[0];
ip->daddr = fd_data->dst_ip[0];
ip->saddr = fd_data->src_ip;
ip->daddr = fd_data->dst_ip;
ip->protocol = 0;
fd_data->pctype = i;
ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
if (ret) {
dev_info(&pf->pdev->dev,
"PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
fd_data->pctype, fd_data->fd_id, ret);
err = true;
/* The packet buffer wasn't added to the ring so we
* need to free it now.
*/
kfree(raw_packet);
return -EOPNOTSUPP;
} else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
if (add)
dev_info(&pf->pdev->dev,
......@@ -383,10 +385,12 @@ static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
}
}
if (err)
kfree(raw_packet);
if (add)
pf->fd_ip4_filter_cnt++;
else
pf->fd_ip4_filter_cnt--;
return err ? -EOPNOTSUPP : 0;
return 0;
}
/**
......
drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c
View file @ 406910a8
......@@ -64,51 +64,50 @@ static const struct i40evf_stats i40evf_gstrings_stats[] = {
(I40EVF_GLOBAL_STATS_LEN + I40EVF_QUEUE_STATS_LEN(_dev))
/**
* i40evf_get_settings - Get Link Speed and Duplex settings
* i40evf_get_link_ksettings - Get Link Speed and Duplex settings
* @netdev: network interface device structure
* @ecmd: ethtool command
* @cmd: ethtool command
*
* Reports speed/duplex settings. Because this is a VF, we don't know what
* kind of link we really have, so we fake it.
**/
static int i40evf_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
static int i40evf_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd)
{
struct i40evf_adapter *adapter = netdev_priv(netdev);
ecmd->supported = 0;
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->transceiver = XCVR_DUMMY1;
ecmd->port = PORT_NONE;
ethtool_link_ksettings_zero_link_mode(cmd, supported);
cmd->base.autoneg = AUTONEG_DISABLE;
cmd->base.port = PORT_NONE;
/* Set speed and duplex */
switch (adapter->link_speed) {
case I40E_LINK_SPEED_40GB:
ethtool_cmd_speed_set(ecmd, SPEED_40000);
cmd->base.speed = SPEED_40000;
break;
case I40E_LINK_SPEED_25GB:
#ifdef SPEED_25000
ethtool_cmd_speed_set(ecmd, SPEED_25000);
cmd->base.speed = SPEED_25000;
#else
netdev_info(netdev,
"Speed is 25G, display not supported by this version of ethtool.\n");
#endif
break;
case I40E_LINK_SPEED_20GB:
ethtool_cmd_speed_set(ecmd, SPEED_20000);
cmd->base.speed = SPEED_20000;
break;
case I40E_LINK_SPEED_10GB:
ethtool_cmd_speed_set(ecmd, SPEED_10000);
cmd->base.speed = SPEED_10000;
break;
case I40E_LINK_SPEED_1GB:
ethtool_cmd_speed_set(ecmd, SPEED_1000);
cmd->base.speed = SPEED_1000;
break;
case I40E_LINK_SPEED_100MB:
ethtool_cmd_speed_set(ecmd, SPEED_100);
cmd->base.speed = SPEED_100;
break;
default:
break;
}
ecmd->duplex = DUPLEX_FULL;
cmd->base.duplex = DUPLEX_FULL;
return 0;
}
......@@ -643,7 +642,6 @@ static int i40evf_set_rxfh(struct net_device *netdev, const u32 *indir,
}
static const struct ethtool_ops i40evf_ethtool_ops = {
.get_settings = i40evf_get_settings,
.get_drvinfo = i40evf_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_ringparam = i40evf_get_ringparam,
......@@ -663,6 +661,7 @@ static const struct ethtool_ops i40evf_ethtool_ops = {
.set_rxfh = i40evf_set_rxfh,
.get_channels = i40evf_get_channels,
.get_rxfh_key_size = i40evf_get_rxfh_key_size,
.get_link_ksettings = i40evf_get_link_ksettings,
};
/**
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7