Skip to content

L
linux
Commit 4069a572 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller
Browse files
Options

net: phy: Document core PHY structures 

Add kerneldoc for the core PHY data structures, a few inline functions
and exported functions which are not already documented.

v2
Typos
g/phy/PHY/s
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 39097ab6
Hide whitespace changes
Inline Side-by-side
Showing with 400 additions and 133 deletions
Documentation/networking/kapi.rst
View file @ 4069a572
......@@ -134,6 +134,15 @@ PHY Support
.. kernel-doc:: drivers/net/phy/phy.c
:internal:
.. kernel-doc:: drivers/net/phy/phy-core.c
:export:
.. kernel-doc:: drivers/net/phy/phy-c45.c
:export:
.. kernel-doc:: include/linux/phy.h
:internal:
.. kernel-doc:: drivers/net/phy/phy_device.c
:export:
......
drivers/net/phy/phy-core.c
View file @ 4069a572
......@@ -6,6 +6,11 @@
#include <linux/phy.h>
#include <linux/of.h>
/**
* phy_speed_to_str - Return a string representing the PHY link speed
*
* @speed: Speed of the link
*/
const char *phy_speed_to_str(int speed)
{
BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92,
......@@ -52,6 +57,11 @@ const char *phy_speed_to_str(int speed)
}
EXPORT_SYMBOL_GPL(phy_speed_to_str);
/**
* phy_duplex_to_str - Return string describing the duplex
*
* @duplex: Duplex setting to describe
*/
const char *phy_duplex_to_str(unsigned int duplex)
{
if (duplex == DUPLEX_HALF)
......@@ -252,6 +262,16 @@ static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
return __set_linkmode_max_speed(max_speed, phydev->supported);
}
/**
* phy_set_max_speed - Set the maximum speed the PHY should support
*
* @phydev: The phy_device struct
* @max_speed: Maximum speed
*
* The PHY might be more capable than the MAC. For example a Fast Ethernet
* is connected to a 1G PHY. This function allows the MAC to indicate its
* maximum speed, and so limit what the PHY will advertise.
*/
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
{
int err;
......@@ -308,6 +328,16 @@ void of_set_phy_eee_broken(struct phy_device *phydev)
phydev->eee_broken_modes = broken;
}
/**
* phy_resolve_aneg_pause - Determine pause autoneg results
*
* @phydev: The phy_device struct
*
* Once autoneg has completed the local pause settings can be
* resolved. Determine if pause and asymmetric pause should be used
* by the MAC.
*/
void phy_resolve_aneg_pause(struct phy_device *phydev)
{
if (phydev->duplex == DUPLEX_FULL) {
......@@ -321,7 +351,7 @@ void phy_resolve_aneg_pause(struct phy_device *phydev)
EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause);
/**
* phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
* phy_resolve_aneg_linkmode - resolve the advertisements into PHY settings
* @phydev: The phy_device struct
*
* Resolve our and the link partner advertisements into their corresponding
......
drivers/net/phy/phy.c
View file @ 4069a572
......@@ -456,7 +456,16 @@ int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
}
EXPORT_SYMBOL(phy_do_ioctl);
/* same as phy_do_ioctl, but ensures that net_device is running */
/**
* phy_do_ioctl_running - generic ndo_do_ioctl implementation but test first
*
* @dev: the net_device struct
* @ifr: &struct ifreq for socket ioctl's
* @cmd: ioctl cmd to execute
*
* Same as phy_do_ioctl, but ensures that net_device is running before
* handling the ioctl.
*/
int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
{
if (!netif_running(dev))
......@@ -466,6 +475,12 @@ int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
}
EXPORT_SYMBOL(phy_do_ioctl_running);
/**
* phy_queue_state_machine - Trigger the state machine to run soon
*
* @phydev: the phy_device struct
* @jiffies: Run the state machine after these jiffies
*/
void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
{
mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
......@@ -473,6 +488,11 @@ void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
}
EXPORT_SYMBOL(phy_queue_state_machine);
/**
* phy_queue_state_machine - Trigger the state machine to run now
*
* @phydev: the phy_device struct
*/
static void phy_trigger_machine(struct phy_device *phydev)
{
phy_queue_state_machine(phydev, 0);
......@@ -489,6 +509,12 @@ static void phy_abort_cable_test(struct phy_device *phydev)
phydev_err(phydev, "Error while aborting cable test");
}
/**
* phy_ethtool_get_strings - Get the statistic counter names
*
* @phydev: the phy_device struct
* @data: Where to put the strings
*/
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
{
if (!phydev->drv)
......@@ -502,6 +528,11 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
}
EXPORT_SYMBOL(phy_ethtool_get_strings);
/**
* phy_ethtool_get_sset_count - Get the number of statistic counters
*
* @phydev: the phy_device struct
*/
int phy_ethtool_get_sset_count(struct phy_device *phydev)
{
int ret;
......@@ -523,6 +554,13 @@ int phy_ethtool_get_sset_count(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_ethtool_get_sset_count);
/**
* phy_ethtool_get_stats - Get the statistic counters
*
* @phydev: the phy_device struct
* @stats: What counters to get
* @data: Where to store the counters
*/
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
......@@ -537,6 +575,12 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
}
EXPORT_SYMBOL(phy_ethtool_get_stats);
/**
* phy_start_cable_test - Start a cable test
*
* @phydev: the phy_device struct
* @extack: extack for reporting useful error messages
*/
int phy_start_cable_test(struct phy_device *phydev,
struct netlink_ext_ack *extack)
{
......@@ -600,6 +644,13 @@ int phy_start_cable_test(struct phy_device *phydev,
}
EXPORT_SYMBOL(phy_start_cable_test);
/**
* phy_start_cable_test_tdr - Start a raw TDR cable test
*
* @phydev: the phy_device struct
* @extack: extack for reporting useful error messages
* @config: Configuration of the test to run
*/
int phy_start_cable_test_tdr(struct phy_device *phydev,
struct netlink_ext_ack *extack,
const struct phy_tdr_config *config)
......@@ -1363,6 +1414,12 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
}
EXPORT_SYMBOL(phy_ethtool_set_eee);
/**
* phy_ethtool_set_wol - Configure Wake On LAN
*
* @phydev: target phy_device struct
* @wol: Configuration requested
*/
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
if (phydev->drv && phydev->drv->set_wol)
......@@ -1372,6 +1429,12 @@ int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
}
EXPORT_SYMBOL(phy_ethtool_set_wol);
/**
* phy_ethtool_get_wol - Get the current Wake On LAN configuration
*
* @phydev: target phy_device struct
* @wol: Store the current configuration here
*/
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
if (phydev->drv && phydev->drv->get_wol)
......@@ -1405,6 +1468,10 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
}
EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
/**
* phy_ethtool_nway_reset - Restart auto negotiation
* @ndev: Network device to restart autoneg for
*/
int phy_ethtool_nway_reset(struct net_device *ndev)
{
struct phy_device *phydev = ndev->phydev;
......
include/linux/phy.h
View file @ 4069a572
......@@ -82,7 +82,39 @@ extern const int phy_10gbit_features_array[1];
#define PHY_POLL_CABLE_TEST 0x00000004
#define MDIO_DEVICE_IS_PHY 0x80000000
/* Interface Mode definitions */
/**
* enum phy_interface_t - Interface Mode definitions
*
* @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch
* @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined
* @PHY_INTERFACE_MODE_MII: Median-independent interface
* @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface
* @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface
* @PHY_INTERFACE_MODE_TBI: Ten Bit Interface
* @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface
* @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface
* @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface
* @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay
* @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay
* @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay
* @PHY_INTERFACE_MODE_RTBI: Reduced TBI
* @PHY_INTERFACE_MODE_SMII: ??? MII
* @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface
* @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface
* @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax
* @PHY_INTERFACE_MODE_QSGMII: Quad SGMII
* @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII
* @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX
* @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX
* @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI
* @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface
* @PHY_INTERFACE_MODE_10GBASER: 10G BaseR
* @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII
* @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN
* @PHY_INTERFACE_MODE_MAX: Book keeping
*
* Describes the interface between the MAC and PHY.
*/
typedef enum {
PHY_INTERFACE_MODE_NA,
PHY_INTERFACE_MODE_INTERNAL,
......@@ -116,8 +148,8 @@ typedef enum {
} phy_interface_t;
/**
* phy_supported_speeds - return all speeds currently supported by a phy device
* @phy: The phy device to return supported speeds of.
* phy_supported_speeds - return all speeds currently supported by a PHY device
* @phy: The PHY device to return supported speeds of.
* @speeds: buffer to store supported speeds in.
* @size: size of speeds buffer.
*
......@@ -134,9 +166,9 @@ unsigned int phy_supported_speeds(struct phy_device *phy,
* phy_modes - map phy_interface_t enum to device tree binding of phy-mode
* @interface: enum phy_interface_t value
*
* Description: maps 'enum phy_interface_t' defined in this file
* Description: maps enum &phy_interface_t defined in this file
* into the device tree binding of 'phy-mode', so that Ethernet
* device driver can get phy interface from device tree.
* device driver can get PHY interface from device tree.
*/
static inline const char *phy_modes(phy_interface_t interface)
{
......@@ -215,6 +247,14 @@ struct sfp_bus;
struct sfp_upstream_ops;
struct sk_buff;
/**
* struct mdio_bus_stats - Statistics counters for MDIO busses
* @transfers: Total number of transfers, i.e. @writes + @reads
* @errors: Number of MDIO transfers that returned an error
* @writes: Number of write transfers
* @reads: Number of read transfers
* @syncp: Synchronisation for incrementing statistics
*/
struct mdio_bus_stats {
u64_stats_t transfers;
u64_stats_t errors;
......@@ -224,7 +264,15 @@ struct mdio_bus_stats {
struct u64_stats_sync syncp;
};
/* Represents a shared structure between different phydev's in the same
/**
* struct phy_package_shared - Shared information in PHY packages
* @addr: Common PHY address used to combine PHYs in one package
* @refcnt: Number of PHYs connected to this shared data
* @flags: Initialization of PHY package
* @priv_size: Size of the shared private data @priv
* @priv: Driver private data shared across a PHY package
*
* Represents a shared structure between different phydev's in the same
* package, for example a quad PHY. See phy_package_join() and
* phy_package_leave().
*/
......@@ -247,7 +295,14 @@ struct phy_package_shared {
#define PHY_SHARED_F_INIT_DONE 0
#define PHY_SHARED_F_PROBE_DONE 1
/*
/**
* struct mii_bus - Represents an MDIO bus
*
* @owner: Who owns this device
* @name: User friendly name for this MDIO device, or driver name
* @id: Unique identifier for this bus, typical from bus hierarchy
* @priv: Driver private data
*
* The Bus class for PHYs. Devices which provide access to
* PHYs should register using this structure
*/
......@@ -256,49 +311,58 @@ struct mii_bus {
const char *name;
char id[MII_BUS_ID_SIZE];
void *priv;
/** @read: Perform a read transfer on the bus */
int (*read)(struct mii_bus *bus, int addr, int regnum);
/** @write: Perform a write transfer on the bus */
int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val);
/** @reset: Perform a reset of the bus */
int (*reset)(struct mii_bus *bus);
/** @stats: Statistic counters per device on the bus */
struct mdio_bus_stats stats[PHY_MAX_ADDR];
/*
* A lock to ensure that only one thing can read/write
/**
* @mdio_lock: A lock to ensure that only one thing can read/write
* the MDIO bus at a time
*/
struct mutex mdio_lock;
/** @parent: Parent device of this bus */
struct device *parent;
/** @state: State of bus structure */
enum {
MDIOBUS_ALLOCATED = 1,
MDIOBUS_REGISTERED,
MDIOBUS_UNREGISTERED,
MDIOBUS_RELEASED,
} state;
/** @dev: Kernel device representation */
struct device dev;
/* list of all PHYs on bus */
/** @mdio_map: list of all MDIO devices on bus */
struct mdio_device *mdio_map[PHY_MAX_ADDR];
/* PHY addresses to be ignored when probing */
/** @phy_mask: PHY addresses to be ignored when probing */
u32 phy_mask;
/* PHY addresses to ignore the TA/read failure */
/** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */
u32 phy_ignore_ta_mask;
/*
* An array of interrupts, each PHY's interrupt at the index
/**
* @irq: An array of interrupts, each PHY's interrupt at the index
* matching its address
*/
int irq[PHY_MAX_ADDR];
/* GPIO reset pulse width in microseconds */
/** @reset_delay_us: GPIO reset pulse width in microseconds */
int reset_delay_us;
/* GPIO reset deassert delay in microseconds */
/** @reset_post_delay_us: GPIO reset deassert delay in microseconds */
int reset_post_delay_us;
/* RESET GPIO descriptor pointer */
/** @reset_gpiod: Reset GPIO descriptor pointer */
struct gpio_desc *reset_gpiod;
/* bus capabilities, used for probing */
/** @probe_capabilities: bus capabilities, used for probing */
enum {
MDIOBUS_NO_CAP = 0,
MDIOBUS_C22,
......@@ -306,15 +370,22 @@ struct mii_bus {
MDIOBUS_C22_C45,
} probe_capabilities;
/* protect access to the shared element */
/** @shared_lock: protect access to the shared element */
struct mutex shared_lock;
/* shared state across different PHYs */
/** @shared: shared state across different PHYs */
struct phy_package_shared *shared[PHY_MAX_ADDR];
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
struct mii_bus *mdiobus_alloc_size(size_t);
struct mii_bus *mdiobus_alloc_size(size_t size);
/**
* mdiobus_alloc - Allocate an MDIO bus structure
*
* The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready
* for the driver to register the bus.
*/
static inline struct mii_bus *mdiobus_alloc(void)
{
return mdiobus_alloc_size(0);
......@@ -341,40 +412,41 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
#define PHY_INTERRUPT_DISABLED false
#define PHY_INTERRUPT_ENABLED true
/* PHY state machine states:
/**
* enum phy_state - PHY state machine states:
*
* DOWN: PHY device and driver are not ready for anything. probe
* @PHY_DOWN: PHY device and driver are not ready for anything. probe
* should be called if and only if the PHY is in this state,
* given that the PHY device exists.
* - PHY driver probe function will set the state to READY
* - PHY driver probe function will set the state to @PHY_READY
*
* READY: PHY is ready to send and receive packets, but the
* @PHY_READY: PHY is ready to send and receive packets, but the
* controller is not. By default, PHYs which do not implement
* probe will be set to this state by phy_probe().
* - start will set the state to UP
*
* UP: The PHY and attached device are ready to do work.
* @PHY_UP: The PHY and attached device are ready to do work.
* Interrupts should be started here.
* - timer moves to NOLINK or RUNNING
* - timer moves to @PHY_NOLINK or @PHY_RUNNING
*
* NOLINK: PHY is up, but not currently plugged in.
* - irq or timer will set RUNNING if link comes back
* - phy_stop moves to HALTED
* @PHY_NOLINK: PHY is up, but not currently plugged in.
* - irq or timer will set @PHY_RUNNING if link comes back
* - phy_stop moves to @PHY_HALTED
*
* RUNNING: PHY is currently up, running, and possibly sending
* @PHY_RUNNING: PHY is currently up, running, and possibly sending
* and/or receiving packets
* - irq or timer will set NOLINK if link goes down
* - phy_stop moves to HALTED
* - irq or timer will set @PHY_NOLINK if link goes down
* - phy_stop moves to @PHY_HALTED
*
* CABLETEST: PHY is performing a cable test. Packet reception/sending
* @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending
* is not expected to work, carrier will be indicated as down. PHY will be
* poll once per second, or on interrupt for it current state.
* Once complete, move to UP to restart the PHY.
* - phy_stop aborts the running test and moves to HALTED
* - phy_stop aborts the running test and moves to @PHY_HALTED
*
* HALTED: PHY is up, but no polling or interrupts are done. Or
* @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or
* PHY is in an error state.
* - phy_start moves to UP
* - phy_start moves to @PHY_UP
*/
enum phy_state {
PHY_DOWN = 0,
......@@ -403,34 +475,67 @@ struct phy_c45_device_ids {
struct macsec_context;
struct macsec_ops;
/* phy_device: An instance of a PHY
/**
* struct phy_device - An instance of a PHY
*
* drv: Pointer to the driver for this PHY instance
* phy_id: UID for this device found during discovery
* c45_ids: 802.3-c45 Device Identifers if is_c45.
* is_c45: Set to true if this phy uses clause 45 addressing.
* is_internal: Set to true if this phy is internal to a MAC.
* is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc.
* is_gigabit_capable: Set to true if PHY supports 1000Mbps
* has_fixups: Set to true if this phy has fixups/quirks.
* suspended: Set to true if this phy has been suspended successfully.
* suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus.
* sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
* loopback_enabled: Set true if this phy has been loopbacked successfully.
* downshifted_rate: Set true if link speed has been downshifted.
* state: state of the PHY for management purposes
* dev_flags: Device-specific flags used by the PHY driver.
* irq: IRQ number of the PHY's interrupt (-1 if none)
* phy_timer: The timer for handling the state machine
* sfp_bus_attached: flag indicating whether the SFP bus has been attached
* sfp_bus: SFP bus attached to this PHY's fiber port
* attached_dev: The attached enet driver's device instance ptr
* adjust_link: Callback for the enet controller to respond to
* changes in the link state.
* macsec_ops: MACsec offloading ops.
* @mdio: MDIO bus this PHY is on
* @drv: Pointer to the driver for this PHY instance
* @phy_id: UID for this device found during discovery
* @c45_ids: 802.3-c45 Device Identifiers if is_c45.
* @is_c45: Set to true if this PHY uses clause 45 addressing.
* @is_internal: Set to true if this PHY is internal to a MAC.
* @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc.
* @is_gigabit_capable: Set to true if PHY supports 1000Mbps
* @has_fixups: Set to true if this PHY has fixups/quirks.
* @suspended: Set to true if this PHY has been suspended successfully.
* @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus.
* @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
* @loopback_enabled: Set true if this PHY has been loopbacked successfully.
* @downshifted_rate: Set true if link speed has been downshifted.
* @state: State of the PHY for management purposes
* @dev_flags: Device-specific flags used by the PHY driver.
* @irq: IRQ number of the PHY's interrupt (-1 if none)
* @phy_timer: The timer for handling the state machine
* @phylink: Pointer to phylink instance for this PHY
* @sfp_bus_attached: Flag indicating whether the SFP bus has been attached
* @sfp_bus: SFP bus attached to this PHY's fiber port
* @attached_dev: The attached enet driver's device instance ptr
* @adjust_link: Callback for the enet controller to respond to changes: in the
* link state.
* @phy_link_change: Callback for phylink for notification of link change
* @macsec_ops: MACsec offloading ops.
*
* speed, duplex, pause, supported, advertising, lp_advertising,
* and autoneg are used like in mii_if_info
* @speed: Current link speed
* @duplex: Current duplex
* @pause: Current pause
* @asym_pause: Current asymmetric pause
* @supported: Combined MAC/PHY supported linkmodes
* @advertising: Currently advertised linkmodes
* @adv_old: Saved advertised while power saving for WoL
* @lp_advertising: Current link partner advertised linkmodes
* @eee_broken_modes: Energy efficient ethernet modes which should be prohibited
* @autoneg: Flag autoneg being used
* @link: Current link state
* @autoneg_complete: Flag auto negotiation of the link has completed
* @mdix: Current crossover
* @mdix_ctrl: User setting of crossover
* @interrupts: Flag interrupts have been enabled
* @interface: enum phy_interface_t value
* @skb: Netlink message for cable diagnostics
* @nest: Netlink nest used for cable diagnostics
* @ehdr: nNtlink header for cable diagnostics
* @phy_led_triggers: Array of LED triggers
* @phy_num_led_triggers: Number of triggers in @phy_led_triggers
* @led_link_trigger: LED trigger for link up/down
* @last_triggered: last LED trigger for link speed
* @master_slave_set: User requested master/slave configuration
* @master_slave_get: Current master/slave advertisement
* @master_slave_state: Current master/slave configuration
* @mii_ts: Pointer to time stamper callbacks
* @lock: Mutex for serialization access to PHY
* @state_queue: Work queue for state machine
* @shared: Pointer to private data shared by phys in one package
* @priv: Pointer to driver private data
*
* interrupts currently only supports enabled or disabled,
* but could be changed in the future to support enabling
......@@ -550,9 +655,18 @@ struct phy_device {
#define to_phy_device(d) container_of(to_mdio_device(d), \
struct phy_device, mdio)
/* A structure containing possible configuration parameters
/**
* struct phy_tdr_config - Configuration of a TDR raw test
*
* @first: Distance for first data collection point
* @last: Distance for last data collection point
* @step: Step between data collection points
* @pair: Bitmap of cable pairs to collect data for
*
* A structure containing possible configuration parameters
* for a TDR cable test. The driver does not need to implement
* all the parameters, but should report what is actually used.
* All distances are in centimeters.
*/
struct phy_tdr_config {
u32 first;
......@@ -562,18 +676,20 @@ struct phy_tdr_config {
};
#define PHY_PAIR_ALL -1
/* struct phy_driver: Driver structure for a particular PHY type
/**
* struct phy_driver - Driver structure for a particular PHY type
*
* driver_data: static driver data
* phy_id: The result of reading the UID registers of this PHY
* @mdiodrv: Data common to all MDIO devices
* @phy_id: The result of reading the UID registers of this PHY
* type, and ANDing them with the phy_id_mask. This driver
* only works for PHYs with IDs which match this field
* name: The friendly name of this PHY type
* phy_id_mask: Defines the important bits of the phy_id
* features: A mandatory list of features (speed, duplex, etc)
* @name: The friendly name of this PHY type
* @phy_id_mask: Defines the important bits of the phy_id
* @features: A mandatory list of features (speed, duplex, etc)
* supported by this PHY
* flags: A bitfield defining certain other features this PHY
* @flags: A bitfield defining certain other features this PHY
* supports (like interrupts)
* @driver_data: Static driver data
*
* All functions are optional. If config_aneg or read_status
* are not implemented, the phy core uses the genphy versions.
......@@ -592,151 +708,178 @@ struct phy_driver {
u32 flags;
const void *driver_data;
/*
* Called to issue a PHY software reset
/**
* @soft_reset: Called to issue a PHY software reset
*/
int (*soft_reset)(struct phy_device *phydev);
/*
* Called to initialize the PHY,
/**
* @config_init: Called to initialize the PHY,
* including after a reset
*/
int (*config_init)(struct phy_device *phydev);
/*
* Called during discovery. Used to set
/**
* @probe: Called during discovery. Used to set
* up device-specific structures, if any
*/
int (*probe)(struct phy_device *phydev);
/*
* Probe the hardware to determine what abilities it has.
* Should only set phydev->supported.
/**
* @get_features: Probe the hardware to determine what
* abilities it has. Should only set phydev->supported.
*/
int (*get_features)(struct phy_device *phydev);
/* PHY Power Management */
/** @suspend: Suspend the hardware, saving state if needed */
int (*suspend)(struct phy_device *phydev);
/** @resume: Resume the hardware, restoring state if needed */
int (*resume)(struct phy_device *phydev);
/*
* Configures the advertisement and resets
/**
* @config_aneg: Configures the advertisement and resets
* autonegotiation if phydev->autoneg is on,
* forces the speed to the current settings in phydev
* if phydev->autoneg is off
*/
int (*config_aneg)(struct phy_device *phydev);
/* Determines the auto negotiation result */
/** @aneg_done: Determines the auto negotiation result */
int (*aneg_done)(struct phy_device *phydev);
/* Determines the negotiated speed and duplex */
/** @read_status: Determines the negotiated speed and duplex */
int (*read_status)(struct phy_device *phydev);
/* Clears any pending interrupts */
/** @ack_interrupt: Clears any pending interrupts */
int (*ack_interrupt)(struct phy_device *phydev);
/* Enables or disables interrupts */
/** @config_intr: Enables or disables interrupts */
int (*config_intr)(struct phy_device *phydev);
/*
* Checks if the PHY generated an interrupt.
/**
* @did_interrupt: Checks if the PHY generated an interrupt.
* For multi-PHY devices with shared PHY interrupt pin
* Set interrupt bits have to be cleared.
*/
int (*did_interrupt)(struct phy_device *phydev);
/* Override default interrupt handling */
/** @handle_interrupt: Override default interrupt handling */
irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
/* Clears up any memory if needed */
/** @remove: Clears up any memory if needed */
void (*remove)(struct phy_device *phydev);
/* Returns true if this is a suitable driver for the given
* phydev. If NULL, matching is based on phy_id and
* phy_id_mask.
/**
* @match_phy_device: Returns true if this is a suitable
* driver for the given phydev. If NULL, matching is based on
* phy_id and phy_id_mask.
*/
int (*match_phy_device)(struct phy_device *phydev);
/* Some devices (e.g. qnap TS-119P II) require PHY register changes to
* enable Wake on LAN, so set_wol is provided to be called in the
* ethernet driver's set_wol function. */
/**
* @set_wol: Some devices (e.g. qnap TS-119P II) require PHY
* register changes to enable Wake on LAN, so set_wol is
* provided to be called in the ethernet driver's set_wol
* function.
*/
int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
/* See set_wol, but for checking whether Wake on LAN is enabled. */
/**
* @get_wol: See set_wol, but for checking whether Wake on LAN
* is enabled.
*/
void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
/*
* Called to inform a PHY device driver when the core is about to
* change the link state. This callback is supposed to be used as
* fixup hook for drivers that need to take action when the link
* state changes. Drivers are by no means allowed to mess with the
/**
* @link_change_notify: Called to inform a PHY device driver
* when the core is about to change the link state. This
* callback is supposed to be used as fixup hook for drivers
* that need to take action when the link state
* changes. Drivers are by no means allowed to mess with the
* PHY device structure in their implementations.
*/
void (*link_change_notify)(struct phy_device *dev);
/*
* Phy specific driver override for reading a MMD register.
* This function is optional for PHY specific drivers. When
* not provided, the default MMD read function will be used
* by phy_read_mmd(), which will use either a direct read for
* Clause 45 PHYs or an indirect read for Clause 22 PHYs.
* devnum is the MMD device number within the PHY device,
* regnum is the register within the selected MMD device.
/**
* @read_mmd: PHY specific driver override for reading a MMD
* register. This function is optional for PHY specific
* drivers. When not provided, the default MMD read function
* will be used by phy_read_mmd(), which will use either a
* direct read for Clause 45 PHYs or an indirect read for
* Clause 22 PHYs. devnum is the MMD device number within the
* PHY device, regnum is the register within the selected MMD
* device.
*/
int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum);
/*
* Phy specific driver override for writing a MMD register.
* This function is optional for PHY specific drivers. When
* not provided, the default MMD write function will be used
* by phy_write_mmd(), which will use either a direct write for
* Clause 45 PHYs, or an indirect write for Clause 22 PHYs.
* devnum is the MMD device number within the PHY device,
* regnum is the register within the selected MMD device.
* val is the value to be written.
/**
* @write_mmd: PHY specific driver override for writing a MMD
* register. This function is optional for PHY specific
* drivers. When not provided, the default MMD write function
* will be used by phy_write_mmd(), which will use either a
* direct write for Clause 45 PHYs, or an indirect write for
* Clause 22 PHYs. devnum is the MMD device number within the
* PHY device, regnum is the register within the selected MMD
* device. val is the value to be written.
*/
int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum,
u16 val);
/** @read_page: Return the current PHY register page number */
int (*read_page)(struct phy_device *dev);
/** @write_page: Set the current PHY register page number */
int (*write_page)(struct phy_device *dev, int page);
/* Get the size and type of the eeprom contained within a plug-in
* module */
/**
* @module_info: Get the size and type of the eeprom contained
* within a plug-in module
*/
int (*module_info)(struct phy_device *dev,
struct ethtool_modinfo *modinfo);
/* Get the eeprom information from the plug-in module */
/**
* @module_eeprom: Get the eeprom information from the plug-in
* module
*/
int (*module_eeprom)(struct phy_device *dev,
struct ethtool_eeprom *ee, u8 *data);
/* Start a cable test */
/** @cable_test_start: Start a cable test */
int (*cable_test_start)(struct phy_device *dev);
/* Start a raw TDR cable test */
/** @cable_test_tdr_start: Start a raw TDR cable test */
int (*cable_test_tdr_start)(struct phy_device *dev,
const struct phy_tdr_config *config);
/* Once per second, or on interrupt, request the status of the
* test.
/**
* @cable_test_get_status: Once per second, or on interrupt,
* request the status of the test.
*/
int (*cable_test_get_status)(struct phy_device *dev, bool *finished);
/* Get statistics from the phy using ethtool */
/* Get statistics from the PHY using ethtool */
/** @get_sset_count: Number of statistic counters */
int (*get_sset_count)(struct phy_device *dev);
/** @get_strings: Names of the statistic counters */
void (*get_strings)(struct phy_device *dev, u8 *data);
/** @get_stats: Return the statistic counter values */
void (*get_stats)(struct phy_device *dev,
struct ethtool_stats *stats, u64 *data);
/* Get and Set PHY tunables */
/** @get_tunable: Return the value of a tunable */
int (*get_tunable)(struct phy_device *dev,
struct ethtool_tunable *tuna, void *data);
/** @set_tunable: Set the value of a tunable */
int (*set_tunable)(struct phy_device *dev,
struct ethtool_tunable *tuna,
const void *data);
/** @set_loopback: Set the loopback mood of the PHY */
int (*set_loopback)(struct phy_device *dev, bool enable);
/** @get_sqi: Get the signal quality indication */
int (*get_sqi)(struct phy_device *dev);
/** @get_sqi_max: Get the maximum signal quality indication */
int (*get_sqi_max)(struct phy_device *dev);
};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
......@@ -890,6 +1033,24 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum,
*/
int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
/**
* phy_read_mmd_poll_timeout - Periodically poll a PHY register until a
* condition is met or a timeout occurs
*
* @phydev: The phy_device struct
* @devaddr: The MMD to read from
* @regnum: The register on the MMD to read
* @val: Variable to read the register into
* @cond: Break condition (usually involving @val)
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms since usleep_range
* is used (see Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @sleep_before_read: if it is true, sleep @sleep_us before read.
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val. Must not
* be called from atomic context if sleep_us or timeout_us are used.
*/
#define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \
sleep_us, timeout_us, sleep_before_read) \
({ \
......@@ -1161,7 +1322,7 @@ static inline bool phy_is_internal(struct phy_device *phydev)
/**
* phy_interface_mode_is_rgmii - Convenience function for testing if a
* PHY interface mode is RGMII (all variants)
* @mode: the phy_interface_t enum
* @mode: the &phy_interface_t enum
*/
static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode)
{
......@@ -1170,11 +1331,11 @@ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode)
};
/**
* phy_interface_mode_is_8023z() - does the phy interface mode use 802.3z
* phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z
* negotiation
* @mode: one of &enum phy_interface_t
*
* Returns true if the phy interface mode uses the 16-bit negotiation
* Returns true if the PHY interface mode uses the 16-bit negotiation
* word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding)
*/
static inline bool phy_interface_mode_is_8023z(phy_interface_t mode)
......@@ -1193,7 +1354,7 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
return phy_interface_mode_is_rgmii(phydev->interface);
};
/*
/**
* phy_is_pseudo_fixed_link - Convenience function for testing if this
* PHY is the CPU port facing side of an Ethernet switch, or similar.
* @phydev: the phy_device struct
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7