digi_acceleport: coding style

Code tidy
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/usb/serial/digi_acceleport.c

@@ -241,7 +241,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <linux/usb/serial.h>
@@ -441,8 +441,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	unsigned int modem_signals, int interruptible);
 static int digi_transmit_idle(struct usb_serial_port *port,
 	unsigned long timeout);
-static void digi_rx_throttle (struct tty_struct *tty);
-static void digi_rx_unthrottle (struct tty_struct *tty);
+static void digi_rx_throttle(struct tty_struct *tty);
+static void digi_rx_unthrottle(struct tty_struct *tty);
 static void digi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 static void digi_break_ctl(struct tty_struct *tty, int break_state);
@@ -486,7 +486,7 @@ static struct usb_device_id id_table_4 [] = {
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver digi_driver = {
 	.name =		"digi_acceleport",
@@ -555,17 +555,17 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 /* Functions */
 
 /*
-*  Cond Wait Interruptible Timeout Irqrestore
-*
-*  Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
-*  so that wake ups are not lost if they occur between the unlock
-*  and the sleep.  In other words, spin_unlock_irqrestore and
-*  interruptible_sleep_on_timeout are "atomic" with respect to
-*  wake ups.  This is used to implement condition variables.
-*
-*  interruptible_sleep_on_timeout is deprecated and has been replaced
-*  with the equivalent code.
-*/
+ *  Cond Wait Interruptible Timeout Irqrestore
+ *
+ *  Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
+ *  so that wake ups are not lost if they occur between the unlock
+ *  and the sleep.  In other words, spin_unlock_irqrestore and
+ *  interruptible_sleep_on_timeout are "atomic" with respect to
+ *  wake ups.  This is used to implement condition variables.
+ *
+ *  interruptible_sleep_on_timeout is deprecated and has been replaced
+ *  with the equivalent code.
+ */
 
 static long cond_wait_interruptible_timeout_irqrestore(
 	wait_queue_head_t *q, long timeout,
@@ -584,15 +584,16 @@ __releases(lock)
 
 
 /*
-*  Digi Wakeup Write
-*
-*  Wake up port, line discipline, and tty processes sleeping
-*  on writes.
-*/
+ *  Digi Wakeup Write
+ *
+ *  Wake up port, line discipline, and tty processes sleeping
+ *  on writes.
+ */
 
 static void digi_wakeup_write_lock(struct work_struct *work)
 {
-	struct digi_port *priv = container_of(work, struct digi_port, dp_wakeup_work);
+	struct digi_port *priv =
+			container_of(work, struct digi_port, dp_wakeup_work);
 	struct usb_serial_port *port = priv->dp_port;
 	unsigned long flags;
 
@@ -608,15 +609,15 @@ static void digi_wakeup_write(struct usb_serial_port *port)
 
 
 /*
-*  Digi Write OOB Command
-*
-*  Write commands on the out of band port.  Commands are 4
-*  bytes each, multiple commands can be sent at once, and
-*  no command will be split across USB packets.  Returns 0
-*  if successful, -EINTR if interrupted while sleeping and
-*  the interruptible flag is true, or a negative error
-*  returned by usb_submit_urb.
-*/
+ *  Digi Write OOB Command
+ *
+ *  Write commands on the out of band port.  Commands are 4
+ *  bytes each, multiple commands can be sent at once, and
+ *  no command will be split across USB packets.  Returns 0
+ *  if successful, -EINTR if interrupted while sleeping and
+ *  the interruptible flag is true, or a negative error
+ *  returned by usb_submit_urb.
+ */
 
 static int digi_write_oob_command(struct usb_serial_port *port,
 	unsigned char *buf, int count, int interruptible)
@@ -631,8 +632,8 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 	dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count);
 
 	spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
-	while(count > 0) {
-		while(oob_port->write_urb->status == -EINPROGRESS
+	while (count > 0) {
+		while (oob_port->write_urb->status == -EINPROGRESS
 			|| oob_priv->dp_write_urb_in_use) {
 			cond_wait_interruptible_timeout_irqrestore(
 				&oob_port->write_wait, DIGI_RETRY_TIMEOUT,
@@ -649,7 +650,8 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 		memcpy(oob_port->write_urb->transfer_buffer, buf, len);
 		oob_port->write_urb->transfer_buffer_length = len;
 		oob_port->write_urb->dev = port->serial->dev;
-		if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) {
+		ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
 			oob_priv->dp_write_urb_in_use = 1;
 			count -= len;
 			buf += len;
@@ -664,16 +666,16 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 
 
 /*
-*  Digi Write In Band Command
-*
-*  Write commands on the given port.  Commands are 4
-*  bytes each, multiple commands can be sent at once, and
-*  no command will be split across USB packets.  If timeout
-*  is non-zero, write in band command will return after
-*  waiting unsuccessfully for the URB status to clear for
-*  timeout ticks.  Returns 0 if successful, or a negative
-*  error returned by digi_write.
-*/
+ *  Digi Write In Band Command
+ *
+ *  Write commands on the given port.  Commands are 4
+ *  bytes each, multiple commands can be sent at once, and
+ *  no command will be split across USB packets.  If timeout
+ *  is non-zero, write in band command will return after
+ *  waiting unsuccessfully for the URB status to clear for
+ *  timeout ticks.  Returns 0 if successful, or a negative
+ *  error returned by digi_write.
+ */
 
 static int digi_write_inb_command(struct usb_serial_port *port,
 	unsigned char *buf, int count, unsigned long timeout)
@@ -693,9 +695,10 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 		timeout = ULONG_MAX;
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
-	while(count > 0 && ret == 0) {
-		while((port->write_urb->status == -EINPROGRESS
-			|| priv->dp_write_urb_in_use) && time_before(jiffies, timeout)) {
+	while (count > 0 && ret == 0) {
+		while ((port->write_urb->status == -EINPROGRESS
+				|| priv->dp_write_urb_in_use)
+					&& time_before(jiffies, timeout)) {
 			cond_wait_interruptible_timeout_irqrestore(
 				&port->write_wait, DIGI_RETRY_TIMEOUT,
 				&priv->dp_port_lock, flags);
@@ -726,7 +729,8 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 		}
 		port->write_urb->dev = port->serial->dev;
 
-		if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) {
+		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
 			priv->dp_write_urb_in_use = 1;
 			priv->dp_out_buf_len = 0;
 			count -= len;
@@ -744,14 +748,14 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 
 
 /*
-*  Digi Set Modem Signals
-*
-*  Sets or clears DTR and RTS on the port, according to the
-*  modem_signals argument.  Use TIOCM_DTR and TIOCM_RTS flags
-*  for the modem_signals argument.  Returns 0 if successful,
-*  -EINTR if interrupted while sleeping, or a non-zero error
-*  returned by usb_submit_urb.
-*/
+ *  Digi Set Modem Signals
+ *
+ *  Sets or clears DTR and RTS on the port, according to the
+ *  modem_signals argument.  Use TIOCM_DTR and TIOCM_RTS flags
+ *  for the modem_signals argument.  Returns 0 if successful,
+ *  -EINTR if interrupted while sleeping, or a non-zero error
+ *  returned by usb_submit_urb.
+ */
 
 static int digi_set_modem_signals(struct usb_serial_port *port,
 	unsigned int modem_signals, int interruptible)
@@ -759,7 +763,7 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 
 	int ret;
 	struct digi_port *port_priv = usb_get_serial_port_data(port);
-	struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
+	struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
 	struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
 	unsigned char *data = oob_port->write_urb->transfer_buffer;
 	unsigned long flags = 0;
@@ -771,7 +775,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
 	spin_lock(&port_priv->dp_port_lock);
 
-	while(oob_port->write_urb->status == -EINPROGRESS || oob_priv->dp_write_urb_in_use) {
+	while (oob_port->write_urb->status == -EINPROGRESS ||
+					oob_priv->dp_write_urb_in_use) {
 		spin_unlock(&port_priv->dp_port_lock);
 		cond_wait_interruptible_timeout_irqrestore(
 			&oob_port->write_wait, DIGI_RETRY_TIMEOUT,
@@ -783,17 +788,20 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	}
 	data[0] = DIGI_CMD_SET_DTR_SIGNAL;
 	data[1] = port_priv->dp_port_num;
-	data[2] = (modem_signals&TIOCM_DTR) ? DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
+	data[2] = (modem_signals & TIOCM_DTR) ?
+					DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
 	data[3] = 0;
 	data[4] = DIGI_CMD_SET_RTS_SIGNAL;
 	data[5] = port_priv->dp_port_num;
-	data[6] = (modem_signals&TIOCM_RTS) ? DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
+	data[6] = (modem_signals & TIOCM_RTS) ?
+					DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
 	data[7] = 0;
 
 	oob_port->write_urb->transfer_buffer_length = 8;
 	oob_port->write_urb->dev = port->serial->dev;
 
-	if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) {
+	ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+	if (ret == 0) {
 		oob_priv->dp_write_urb_in_use = 1;
 		port_priv->dp_modem_signals =
 			(port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
@@ -807,16 +815,16 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 }
 
 /*
-*  Digi Transmit Idle
-*
-*  Digi transmit idle waits, up to timeout ticks, for the transmitter
-*  to go idle.  It returns 0 if successful or a negative error.
-*
-*  There are race conditions here if more than one process is calling
-*  digi_transmit_idle on the same port at the same time.  However, this
-*  is only called from close, and only one process can be in close on a
-*  port at a time, so its ok.
-*/
+ *  Digi Transmit Idle
+ *
+ *  Digi transmit idle waits, up to timeout ticks, for the transmitter
+ *  to go idle.  It returns 0 if successful or a negative error.
+ *
+ *  There are race conditions here if more than one process is calling
+ *  digi_transmit_idle on the same port at the same time.  However, this
+ *  is only called from close, and only one process can be in close on a
+ *  port at a time, so its ok.
+ */
 
 static int digi_transmit_idle(struct usb_serial_port *port,
 	unsigned long timeout)
@@ -835,12 +843,13 @@ static int digi_transmit_idle(struct usb_serial_port *port,
 
 	timeout += jiffies;
 
-	if ((ret = digi_write_inb_command(port, buf, 2, timeout - jiffies)) != 0)
+	ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
+	if (ret != 0)
 		return ret;
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
-	while(time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
+	while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
 		cond_wait_interruptible_timeout_irqrestore(
 			&priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
 			&priv->dp_port_lock, flags);
@@ -901,7 +910,7 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
 }
 
 
-static void digi_set_termios(struct tty_struct *tty, 
+static void digi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct digi_port *priv = usb_get_serial_port_data(port);
@@ -911,14 +920,15 @@ static void digi_set_termios(struct tty_struct *tty,
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned char buf[32];
 	unsigned int modem_signals;
-	int arg,ret;
+	int arg, ret;
 	int i = 0;
 	speed_t baud;
 
 	dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
 
 	/* set baud rate */
-	if ((baud = tty_get_baud_rate(tty)) != tty_termios_baud_rate(old_termios)) {
+	baud = tty_get_baud_rate(tty);
+	if (baud != tty_termios_baud_rate(old_termios)) {
 		arg = -1;
 
 		/* reassert DTR and (maybe) RTS on transition from B0 */
@@ -932,30 +942,30 @@ static void digi_set_termios(struct tty_struct *tty,
 			digi_set_modem_signals(port, modem_signals, 1);
 		}
 		switch (baud) {
-			/* drop DTR and RTS on transition to B0 */
-			case 0: digi_set_modem_signals(port, 0, 1); break;
-			case 50: arg = DIGI_BAUD_50; break;
-			case 75: arg = DIGI_BAUD_75; break;
-			case 110: arg = DIGI_BAUD_110; break;
-			case 150: arg = DIGI_BAUD_150; break;
-			case 200: arg = DIGI_BAUD_200; break;
-			case 300: arg = DIGI_BAUD_300; break;
-			case 600: arg = DIGI_BAUD_600; break;
-			case 1200: arg = DIGI_BAUD_1200; break;
-			case 1800: arg = DIGI_BAUD_1800; break;
-			case 2400: arg = DIGI_BAUD_2400; break;
-			case 4800: arg = DIGI_BAUD_4800; break;
-			case 9600: arg = DIGI_BAUD_9600; break;
-			case 19200: arg = DIGI_BAUD_19200; break;
-			case 38400: arg = DIGI_BAUD_38400; break;
-			case 57600: arg = DIGI_BAUD_57600; break;
-			case 115200: arg = DIGI_BAUD_115200; break;
-			case 230400: arg = DIGI_BAUD_230400; break;
-			case 460800: arg = DIGI_BAUD_460800; break;
-			default:
-				arg = DIGI_BAUD_9600;
-				baud = 9600;
-				break;
+		/* drop DTR and RTS on transition to B0 */
+		case 0: digi_set_modem_signals(port, 0, 1); break;
+		case 50: arg = DIGI_BAUD_50; break;
+		case 75: arg = DIGI_BAUD_75; break;
+		case 110: arg = DIGI_BAUD_110; break;
+		case 150: arg = DIGI_BAUD_150; break;
+		case 200: arg = DIGI_BAUD_200; break;
+		case 300: arg = DIGI_BAUD_300; break;
+		case 600: arg = DIGI_BAUD_600; break;
+		case 1200: arg = DIGI_BAUD_1200; break;
+		case 1800: arg = DIGI_BAUD_1800; break;
+		case 2400: arg = DIGI_BAUD_2400; break;
+		case 4800: arg = DIGI_BAUD_4800; break;
+		case 9600: arg = DIGI_BAUD_9600; break;
+		case 19200: arg = DIGI_BAUD_19200; break;
+		case 38400: arg = DIGI_BAUD_38400; break;
+		case 57600: arg = DIGI_BAUD_57600; break;
+		case 115200: arg = DIGI_BAUD_115200; break;
+		case 230400: arg = DIGI_BAUD_230400; break;
+		case 460800: arg = DIGI_BAUD_460800; break;
+		default:
+			arg = DIGI_BAUD_9600;
+			baud = 9600;
+			break;
 		}
 		if (arg != -1) {
 			buf[i++] = DIGI_CMD_SET_BAUD_RATE;
@@ -1081,7 +1091,8 @@ static void digi_set_termios(struct tty_struct *tty,
 		buf[i++] = arg;
 		buf[i++] = 0;
 	}
-	if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0)
+	ret = digi_write_oob_command(port, buf, i, 1);
+	if (ret != 0)
 		dbg("digi_set_termios: write oob failed, ret=%d", ret);
 	tty_encode_baud_rate(tty, baud, baud);
 }
@@ -1137,7 +1148,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
 
-	int ret,data_len,new_len;
+	int ret, data_len, new_len;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	unsigned char *data = port->write_urb->transfer_buffer;
 	unsigned long flags = 0;
@@ -1155,7 +1166,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
 	/* wait for urb status clear to submit another urb */
-	if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) {
+	if (port->write_urb->status == -EINPROGRESS ||
+					priv->dp_write_urb_in_use) {
 		/* buffer data if count is 1 (probably put_char) if possible */
 		if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
 			priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
@@ -1190,7 +1202,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* copy in new data */
 	memcpy(data, buf, new_len);
 
-	if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) {
+	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (ret == 0) {
 		priv->dp_write_urb_in_use = 1;
 		ret = new_len;
 		priv->dp_out_buf_len = 0;
@@ -1204,7 +1217,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("digi_write: returning %d", ret);
 	return ret;
 
-} 
+}
 
 static void digi_write_bulk_callback(struct urb *urb)
 {
@@ -1219,13 +1232,13 @@ static void digi_write_bulk_callback(struct urb *urb)
 	dbg("digi_write_bulk_callback: TOP, urb->status=%d", status);
 
 	/* port and serial sanity check */
-	if (port == NULL || (priv=usb_get_serial_port_data(port)) == NULL) {
+	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
 		err("%s: port or port->private is NULL, status=%d",
 		    __func__, status);
 		return;
 	}
 	serial = port->serial;
-	if (serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL) {
+	if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
 		err("%s: serial or serial->private is NULL, status=%d",
 		    __func__, status);
 		return;
@@ -1248,13 +1261,15 @@ static void digi_write_bulk_callback(struct urb *urb)
 	    && priv->dp_out_buf_len > 0) {
 		*((unsigned char *)(port->write_urb->transfer_buffer))
 			= (unsigned char)DIGI_CMD_SEND_DATA;
-		*((unsigned char *)(port->write_urb->transfer_buffer)+1)
+		*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
 			= (unsigned char)priv->dp_out_buf_len;
-		port->write_urb->transfer_buffer_length = priv->dp_out_buf_len+2;
+		port->write_urb->transfer_buffer_length =
+						priv->dp_out_buf_len + 2;
 		port->write_urb->dev = serial->dev;
-		memcpy(port->write_urb->transfer_buffer+2, priv->dp_out_buf,
+		memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
 			priv->dp_out_buf_len);
-		if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) {
+		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
 			priv->dp_write_urb_in_use = 1;
 			priv->dp_out_buf_len = 0;
 		}
@@ -1280,7 +1295,8 @@ static int digi_write_room(struct tty_struct *tty)
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
-	if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use)
+	if (port->write_urb->status == -EINPROGRESS ||
+					priv->dp_write_urb_in_use)
 		room = 0;
 	else
 		room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
@@ -1336,7 +1352,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* wait for a close in progress to finish */
-	while(priv->dp_in_close) {
+	while (priv->dp_in_close) {
 		cond_wait_interruptible_timeout_irqrestore(
 			&priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
 			&priv->dp_port_lock, flags);
@@ -1346,7 +1362,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
- 
+
 	/* read modem signals automatically whenever they change */
 	buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
 	buf[1] = priv->dp_port_num;
@@ -1359,7 +1375,8 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
 	buf[7] = 0;
 
-	if ((ret = digi_write_oob_command(port, buf, 8, 1)) != 0)
+	ret = digi_write_oob_command(port, buf, 8, 1);
+	if (ret != 0)
 		dbg("digi_open: write oob failed, ret=%d", ret);
 
 	/* set termios settings */
@@ -1410,9 +1427,8 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (port->serial->dev) {
 		/* wait for transmit idle */
-		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
+		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
 			digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-		}
 		/* drop DTR and RTS */
 		digi_set_modem_signals(port, 0, 0);
 
@@ -1446,11 +1462,13 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 		buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
 		buf[19] = 0;
 
-		if ((ret = digi_write_oob_command(port, buf, 20, 0)) != 0)
+		ret = digi_write_oob_command(port, buf, 20, 0);
+		if (ret != 0)
 			dbg("digi_close: write oob failed, ret=%d", ret);
 
 		/* wait for final commands on oob port to complete */
-		prepare_to_wait(&priv->dp_flush_wait, &wait, TASK_INTERRUPTIBLE);
+		prepare_to_wait(&priv->dp_flush_wait, &wait,
+							TASK_INTERRUPTIBLE);
 		schedule_timeout(DIGI_CLOSE_TIMEOUT);
 		finish_wait(&priv->dp_flush_wait, &wait);
 
@@ -1470,15 +1488,15 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 
 
 /*
-*  Digi Startup Device
-*
-*  Starts reads on all ports.  Must be called AFTER startup, with
-*  urbs initialized.  Returns 0 if successful, non-zero error otherwise.
-*/
+ *  Digi Startup Device
+ *
+ *  Starts reads on all ports.  Must be called AFTER startup, with
+ *  urbs initialized.  Returns 0 if successful, non-zero error otherwise.
+ */
 
 static int digi_startup_device(struct usb_serial *serial)
 {
-	int i,ret = 0;
+	int i, ret = 0;
 	struct digi_serial *serial_priv = usb_get_serial_data(serial);
 	struct usb_serial_port *port;
 
@@ -1496,7 +1514,8 @@ static int digi_startup_device(struct usb_serial *serial)
 	for (i = 0; i < serial->type->num_ports + 1; i++) {
 		port = serial->port[i];
 		port->write_urb->dev = port->serial->dev;
-		if ((ret = usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0) {
+		ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (ret != 0) {
 			err("%s: usb_submit_urb failed, ret=%d, port=%d",
 					__func__, ret, i);
 			break;
@@ -1517,7 +1536,7 @@ static int digi_startup(struct usb_serial *serial)
 
 	/* allocate the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
-	for(i = 0; i < serial->type->num_ports + 1; i++) {
+	for (i = 0; i < serial->type->num_ports + 1; i++) {
 		/* allocate port private structure */
 		priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
 		if (priv == NULL) {
@@ -1580,7 +1599,7 @@ static void digi_shutdown(struct usb_serial *serial)
 
 	/* free the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
-	for(i = 0; i < serial->type->num_ports + 1; i++)
+	for (i = 0; i < serial->type->num_ports + 1; i++)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 	kfree(usb_get_serial_data(serial));
 }
@@ -1603,7 +1622,7 @@ static void digi_read_bulk_callback(struct urb *urb)
 		return;
 	}
 	if (port->serial == NULL ||
-		(serial_priv=usb_get_serial_data(port->serial)) == NULL) {
+		(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
 		err("%s: serial is bad or serial->private is NULL, status=%d",
 			__func__, status);
 		return;
@@ -1627,22 +1646,23 @@ static void digi_read_bulk_callback(struct urb *urb)
 
 	/* continue read */
 	urb->dev = port->serial->dev;
-	if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret != 0) {
 		err("%s: failed resubmitting urb, ret=%d, port=%d",
 		    __func__, ret, priv->dp_port_num);
 	}
 
 }
 
-/* 
-*  Digi Read INB Callback
-*
-*  Digi Read INB Callback handles reads on the in band ports, sending
-*  the data on to the tty subsystem.  When called we know port and
-*  port->private are not NULL and port->serial has been validated.
-*  It returns 0 if successful, 1 if successful but the port is
-*  throttled, and -1 if the sanity checks failed.
-*/
+/*
+ *  Digi Read INB Callback
+ *
+ *  Digi Read INB Callback handles reads on the in band ports, sending
+ *  the data on to the tty subsystem.  When called we know port and
+ *  port->private are not NULL and port->serial has been validated.
+ *  It returns 0 if successful, 1 if successful but the port is
+ *  throttled, and -1 if the sanity checks failed.
+ */
 
 static int digi_read_inb_callback(struct urb *urb)
 {
@@ -1653,8 +1673,8 @@ static int digi_read_inb_callback(struct urb *urb)
 	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
 	int len = ((unsigned char *)urb->transfer_buffer)[1];
 	int port_status = ((unsigned char *)urb->transfer_buffer)[2];
-	unsigned char *data = ((unsigned char *)urb->transfer_buffer)+3;
-	int flag,throttled;
+	unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
+	int flag, throttled;
 	int i;
 	int status = urb->status;
 
@@ -1665,7 +1685,7 @@ static int digi_read_inb_callback(struct urb *urb)
 
 	/* short/multiple packet check */
 	if (urb->actual_length != len + 2) {
-     		err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
+		err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
 		    "port=%d, opcode=%d, len=%d, actual_length=%d, "
 		    "status=%d", __func__, status, priv->dp_port_num,
 		    opcode, len, urb->actual_length, port_status);
@@ -1707,8 +1727,9 @@ static int digi_read_inb_callback(struct urb *urb)
 			if (flag == TTY_NORMAL)
 				tty_insert_flip_string(tty, data, len);
 			else {
-				for(i = 0; i < len; i++)
-					tty_insert_flip_char(tty, data[i], flag);
+				for (i = 0; i < len; i++)
+					tty_insert_flip_char(tty,
+								data[i], flag);
 			}
 			tty_flip_buffer_push(tty);
 		}
@@ -1720,19 +1741,19 @@ static int digi_read_inb_callback(struct urb *urb)
 	else if (opcode != DIGI_CMD_RECEIVE_DATA)
 		dbg("%s: unknown opcode: %d", __func__, opcode);
 
-	return(throttled ? 1 : 0);
+	return throttled ? 1 : 0;
 
 }
 
 
-/* 
-*  Digi Read OOB Callback
-*
-*  Digi Read OOB Callback handles reads on the out of band port.
-*  When called we know port and port->private are not NULL and
-*  the port->serial is valid.  It returns 0 if successful, and
-*  -1 if the sanity checks failed.
-*/
+/*
+ *  Digi Read OOB Callback
+ *
+ *  Digi Read OOB Callback handles reads on the out of band port.
+ *  When called we know port and port->private are not NULL and
+ *  the port->serial is valid.  It returns 0 if successful, and
+ *  -1 if the sanity checks failed.
+ */
 
 static int digi_read_oob_callback(struct urb *urb)
 {
@@ -1742,12 +1763,13 @@ static int digi_read_oob_callback(struct urb *urb)
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode, line, status, val;
 	int i;
+	unsigned int rts;
 
 	dbg("digi_read_oob_callback: port=%d, len=%d",
 			priv->dp_port_num, urb->actual_length);
 
 	/* handle each oob command */
-	for(i = 0; i < urb->actual_length - 3;) {
+	for (i = 0; i < urb->actual_length - 3;) {
 		opcode = ((unsigned char *)urb->transfer_buffer)[i++];
 		line = ((unsigned char *)urb->transfer_buffer)[i++];
 		status = ((unsigned char *)urb->transfer_buffer)[i++];
@@ -1761,27 +1783,29 @@ static int digi_read_oob_callback(struct urb *urb)
 
 		port = serial->port[line];
 
-		if ((priv=usb_get_serial_port_data(port)) == NULL)
+		priv = usb_get_serial_port_data(port);
+		if (priv == NULL)
 			return -1;
 
+		rts = 0;
+		if (port->port.count)
+			rts = port->port.tty->termios->c_cflag & CRTSCTS;
+
 		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->port.count
-					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+				if (rts) {
 					port->port.tty->hw_stopped = 0;
 					digi_wakeup_write(port);
 				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->port.count
-					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+				if (rts)
 					port->port.tty->hw_stopped = 1;
-				}
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
 				priv->dp_modem_signals |= TIOCM_DSR;
@@ -1818,7 +1842,7 @@ static int __init digi_init(void)
 	if (retval)
 		goto failed_acceleport_2_device;
 	retval = usb_serial_register(&digi_acceleport_4_device);
-	if (retval) 
+	if (retval)
 		goto failed_acceleport_4_device;
 	retval = usb_register(&digi_driver);
 	if (retval)