Commit 4206f0c4 authored by Wim Van Sebroeck's avatar Wim Van Sebroeck

[WATCHDOG] pcwd.c control status patch

Clean-up the control status code (insert tabs where relevant),
Add new Control Status defines, Make sure that the R2DS bit
stays the same.
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent 683aa401
......@@ -73,8 +73,8 @@
#include <asm/io.h> /* For inb/outb/... */
/* Module and version information */
#define WATCHDOG_VERSION "1.16"
#define WATCHDOG_DATE "03 Jan 2006"
#define WATCHDOG_VERSION "1.17"
#define WATCHDOG_DATE "12 Feb 2006"
#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
#define WATCHDOG_NAME "pcwd"
#define PFX WATCHDOG_NAME ": "
......@@ -105,6 +105,10 @@
#define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
#define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
#define WD_REVC_TTRP 0x04 /* Temperature Trip status */
#define WD_REVC_RL2A 0x08 /* Relay 2 activated by on-board processor */
#define WD_REVC_RL1A 0x10 /* Relay 1 active */
#define WD_REVC_R2DS 0x40 /* Relay 2 disable */
#define WD_REVC_RLY2 0x80 /* Relay 2 activated? */
/* Port 2 : Control Status #2 */
#define WD_WDIS 0x10 /* Watchdog Disabled */
#define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */
......@@ -407,7 +411,7 @@ static int pcwd_set_heartbeat(int t)
static int pcwd_get_status(int *status)
{
int card_status;
int control_status;
*status=0;
spin_lock(&pcwd_private.io_lock);
......@@ -415,22 +419,22 @@ static int pcwd_get_status(int *status)
/* Rev A cards return status information from
* the base register, which is used for the
* temperature in other cards. */
card_status = inb(pcwd_private.io_addr);
control_status = inb(pcwd_private.io_addr);
else {
/* Rev C cards return card status in the base
* address + 1 register. And use different bits
* to indicate a card initiated reset, and an
* over-temperature condition. And the reboot
* status can be reset. */
card_status = inb(pcwd_private.io_addr + 1);
control_status = inb(pcwd_private.io_addr + 1);
}
spin_unlock(&pcwd_private.io_lock);
if (pcwd_private.revision == PCWD_REVISION_A) {
if (card_status & WD_WDRST)
if (control_status & WD_WDRST)
*status |= WDIOF_CARDRESET;
if (card_status & WD_T110) {
if (control_status & WD_T110) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
printk (KERN_INFO PFX "Temperature overheat trip!\n");
......@@ -438,10 +442,10 @@ static int pcwd_get_status(int *status)
}
}
} else {
if (card_status & WD_REVC_WTRP)
if (control_status & WD_REVC_WTRP)
*status |= WDIOF_CARDRESET;
if (card_status & WD_REVC_TTRP) {
if (control_status & WD_REVC_TTRP) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
printk (KERN_INFO PFX "Temperature overheat trip!\n");
......@@ -455,9 +459,16 @@ static int pcwd_get_status(int *status)
static int pcwd_clear_status(void)
{
int control_status;
if (pcwd_private.revision == PCWD_REVISION_C) {
spin_lock(&pcwd_private.io_lock);
outb_p(0x00, pcwd_private.io_addr + 1); /* clear reset status */
control_status = inb_p(pcwd_private.io_addr + 1);
/* clear reset status & Keep Relay 2 disable state as it is */
outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1);
spin_unlock(&pcwd_private.io_lock);
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment