ieee1394: sbp2: coding style of some macros

Adjust parentheses, indentation, line lengths.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

drivers/ieee1394/sbp2.h

@@ -32,18 +32,18 @@
 #define ORB_DIRECTION_READ_FROM_MEDIA	0x1
 #define ORB_DIRECTION_NO_DATA_TRANSFER	0x2
 
-#define ORB_SET_NULL_PTR(value)			((value & 0x1) << 31)
-#define ORB_SET_NOTIFY(value)			((value & 0x1) << 31)
-#define ORB_SET_RQ_FMT(value)			((value & 0x3) << 29)	/* unused ? */
-#define ORB_SET_NODE_ID(value)			((value & 0xffff) << 16)
-#define ORB_SET_STATUS_FIFO_HI(value, id)	(value >> 32 | ORB_SET_NODE_ID(id))
-#define ORB_SET_STATUS_FIFO_LO(value)		(value & 0xffffffff)
-#define ORB_SET_DATA_SIZE(value)		(value & 0xffff)
-#define ORB_SET_PAGE_SIZE(value)		((value & 0x7) << 16)
-#define ORB_SET_PAGE_TABLE_PRESENT(value)	((value & 0x1) << 19)
-#define ORB_SET_MAX_PAYLOAD(value)		((value & 0xf) << 20)
-#define ORB_SET_SPEED(value)			((value & 0x7) << 24)
-#define ORB_SET_DIRECTION(value)		((value & 0x1) << 27)
+#define ORB_SET_NULL_PTR(v)		(((v) & 0x1) << 31)
+#define ORB_SET_NOTIFY(v)		(((v) & 0x1) << 31)
+#define ORB_SET_RQ_FMT(v)		(((v) & 0x3) << 29)
+#define ORB_SET_NODE_ID(v)		(((v) & 0xffff) << 16)
+#define ORB_SET_STATUS_FIFO_HI(v, id)	((v) >> 32 | ORB_SET_NODE_ID(id))
+#define ORB_SET_STATUS_FIFO_LO(v)	((v) & 0xffffffff)
+#define ORB_SET_DATA_SIZE(v)		((v) & 0xffff)
+#define ORB_SET_PAGE_SIZE(v)		(((v) & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(v)	(((v) & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(v)		(((v) & 0xf) << 20)
+#define ORB_SET_SPEED(v)		(((v) & 0x7) << 24)
+#define ORB_SET_DIRECTION(v)		(((v) & 0x1) << 27)
 
 struct sbp2_command_orb {
 	u32 next_ORB_hi;
@@ -64,12 +64,12 @@ struct sbp2_command_orb {
 #define SBP2_LOGICAL_UNIT_RESET		0xe
 #define SBP2_TARGET_RESET_REQUEST	0xf
 
-#define ORB_SET_LUN(value)                      (value & 0xffff)
-#define ORB_SET_FUNCTION(value)                 ((value & 0xf) << 16)
-#define ORB_SET_RECONNECT(value)                ((value & 0xf) << 20)
-#define ORB_SET_EXCLUSIVE(value)                ((value & 0x1) << 28)
-#define ORB_SET_LOGIN_RESP_LENGTH(value)        (value & 0xffff)
-#define ORB_SET_PASSWD_LENGTH(value)            ((value & 0xffff) << 16)
+#define ORB_SET_LUN(v)			((v) & 0xffff)
+#define ORB_SET_FUNCTION(v)		(((v) & 0xf) << 16)
+#define ORB_SET_RECONNECT(v)		(((v) & 0xf) << 20)
+#define ORB_SET_EXCLUSIVE(v)		(((v) & 0x1) << 28)
+#define ORB_SET_LOGIN_RESP_LENGTH(v)	((v) & 0xffff)
+#define ORB_SET_PASSWD_LENGTH(v)	(((v) & 0xffff) << 16)
 
 struct sbp2_login_orb {
 	u32 password_hi;
@@ -82,9 +82,9 @@ struct sbp2_login_orb {
 	u32 status_fifo_lo;
 } __attribute__((packed));
 
-#define RESPONSE_GET_LOGIN_ID(value)            (value & 0xffff)
-#define RESPONSE_GET_LENGTH(value)              ((value >> 16) & 0xffff)
-#define RESPONSE_GET_RECONNECT_HOLD(value)      (value & 0xffff)
+#define RESPONSE_GET_LOGIN_ID(v)	((v) & 0xffff)
+#define RESPONSE_GET_LENGTH(v)		(((v) >> 16) & 0xffff)
+#define RESPONSE_GET_RECONNECT_HOLD(v)	((v) & 0xffff)
 
 struct sbp2_login_response {
 	u32 length_login_ID;
@@ -93,9 +93,8 @@ struct sbp2_login_response {
 	u32 reconnect_hold;
 } __attribute__((packed));
 
-#define ORB_SET_LOGIN_ID(value)                 (value & 0xffff)
-
-#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)
+#define ORB_SET_LOGIN_ID(v)                 ((v) & 0xffff)
+#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
 
 struct sbp2_query_logins_orb {
 	u32 reserved1;
@@ -108,8 +107,8 @@ struct sbp2_query_logins_orb {
 	u32 status_fifo_lo;
 } __attribute__((packed));
 
-#define RESPONSE_GET_MAX_LOGINS(value)          (value & 0xffff)
-#define RESPONSE_GET_ACTIVE_LOGINS(value)       ((RESPONSE_GET_LENGTH(value) - 4) / 12)
+#define RESPONSE_GET_MAX_LOGINS(v)	((v) & 0xffff)
+#define RESPONSE_GET_ACTIVE_LOGINS(v)	((RESPONSE_GET_LENGTH((v)) - 4) / 12)
 
 struct sbp2_query_logins_response {
 	u32 length_max_logins;
@@ -140,8 +139,8 @@ struct sbp2_logout_orb {
 	u32 status_fifo_lo;
 } __attribute__((packed));
 
-#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value)   (value & 0xffff)
-#define PAGE_TABLE_SET_SEGMENT_LENGTH(value)    ((value & 0xffff) << 16)
+#define PAGE_TABLE_SET_SEGMENT_BASE_HI(v)	((v) & 0xffff)
+#define PAGE_TABLE_SET_SEGMENT_LENGTH(v)	(((v) & 0xffff) << 16)
 
 struct sbp2_unrestricted_page_table {
 	u32 length_segment_base_hi;
@@ -171,23 +170,14 @@ struct sbp2_unrestricted_page_table {
 #define SFMT_DEFERRED_ERROR			0x1
 #define SFMT_VENDOR_DEPENDENT_STATUS		0x3
 
-#define SBP2_SCSI_STATUS_GOOD			0x0
-#define SBP2_SCSI_STATUS_CHECK_CONDITION	0x2
-#define SBP2_SCSI_STATUS_CONDITION_MET		0x4
-#define SBP2_SCSI_STATUS_BUSY			0x8
-#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT	0x18
-#define SBP2_SCSI_STATUS_COMMAND_TERMINATED	0x22
-
-#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT	0xff
-
-#define STATUS_GET_SRC(value)			(((value) >> 30) & 0x3)
-#define STATUS_GET_RESP(value)			(((value) >> 28) & 0x3)
-#define STATUS_GET_LEN(value)			(((value) >> 24) & 0x7)
-#define STATUS_GET_SBP_STATUS(value)		(((value) >> 16) & 0xff)
-#define STATUS_GET_ORB_OFFSET_HI(value)		((value) & 0x0000ffff)
-#define STATUS_TEST_DEAD(value)			((value) & 0x08000000)
+#define STATUS_GET_SRC(v)			(((v) >> 30) & 0x3)
+#define STATUS_GET_RESP(v)			(((v) >> 28) & 0x3)
+#define STATUS_GET_LEN(v)			(((v) >> 24) & 0x7)
+#define STATUS_GET_SBP_STATUS(v)		(((v) >> 16) & 0xff)
+#define STATUS_GET_ORB_OFFSET_HI(v)		((v) & 0x0000ffff)
+#define STATUS_TEST_DEAD(v)			((v) & 0x08000000)
 /* test 'resp' | 'dead' | 'sbp2_status' */
-#define STATUS_TEST_RDS(value)			((value) & 0x38ff0000)
+#define STATUS_TEST_RDS(v)			((v) & 0x38ff0000)
 
 struct sbp2_status_block {
 	u32 ORB_offset_hi_misc;
@@ -233,15 +223,19 @@ struct sbp2_status_block {
  */
 
 #define SBP2_MAX_SG_ELEMENT_LENGTH		0xf000
-#define SBP2_MAX_SECTORS		255	/* Max sectors supported */
-#define SBP2_MAX_CMDS			8	/* This should be safe */
+#define SBP2_MAX_SECTORS			255
+/* There is no real limitation of the queue depth (i.e. length of the linked
+ * list of command ORBs) at the target. The chosen depth is merely an
+ * implementation detail of the sbp2 driver. */
+#define SBP2_MAX_CMDS				8
 
-/* Flags for detected oddities and brokeness */
-#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
-#define SBP2_WORKAROUND_INQUIRY_36	0x2
-#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
-#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
-#define SBP2_WORKAROUND_OVERRIDE	0x100
+#define SBP2_SCSI_STATUS_GOOD			0x0
+#define SBP2_SCSI_STATUS_CHECK_CONDITION	0x2
+#define SBP2_SCSI_STATUS_CONDITION_MET		0x4
+#define SBP2_SCSI_STATUS_BUSY			0x8
+#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT	0x18
+#define SBP2_SCSI_STATUS_COMMAND_TERMINATED	0x22
+#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT	0xff
 
 /* This is the two dma types we use for cmd_dma below */
 enum cmd_dma_types {
@@ -364,4 +358,11 @@ struct sbp2scsi_host_info {
 	struct list_head scsi_ids;	/* List of scsi ids on this host */
 };
 
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
+#define SBP2_WORKAROUND_INQUIRY_36	0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
+#define SBP2_WORKAROUND_OVERRIDE	0x100
+
 #endif /* SBP2_H */