Commit 4282b01e authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86 boot: document for 32 bit boot protocol
  remove the dead X86_REMOTE_DEBUG option
  x86: merge EARLY_PRINTK options
  x86: mm/discontig_32.c: make code static
  x86: kernel/setup_32.c: unexport machine_id
  x86 gart: rename symbols only used for the GART implementation
  x86 gart: make some variables and functions static
  x86 gart: rename CONFIG_IOMMU to CONFIG_GART_IOMMU
  x86 gart: rename iommu.h to gart.h
  x86: additional CPUID strings; fix strings for AMD-ecx
parents 9301899b aa69432a
...@@ -785,3 +785,41 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and ...@@ -785,3 +785,41 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and
After completing your hook, you should jump to the address After completing your hook, you should jump to the address
that was in this field before your boot loader overwrote it that was in this field before your boot loader overwrote it
(relocated, if appropriate.) (relocated, if appropriate.)
**** 32-bit BOOT PROTOCOL
For machine with some new BIOS other than legacy BIOS, such as EFI,
LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel
based on legacy BIOS can not be used, so a 32-bit boot protocol needs
to be defined.
In 32-bit boot protocol, the first step in loading a Linux kernel
should be to setup the boot parameters (struct boot_params,
traditionally known as "zero page"). The memory for struct boot_params
should be allocated and initialized to all zero. Then the setup header
from offset 0x01f1 of kernel image on should be loaded into struct
boot_params and examined. The end of setup header can be calculated as
follow:
0x0202 + byte value at offset 0x0201
In addition to read/modify/write the setup header of the struct
boot_params as that of 16-bit boot protocol, the boot loader should
also fill the additional fields of the struct boot_params as that
described in zero-page.txt.
After setupping the struct boot_params, the boot loader can load the
32/64-bit kernel in the same way as that of 16-bit boot protocol.
In 32-bit boot protocol, the kernel is started by jumping to the
32-bit kernel entry point, which is the start address of loaded
32/64-bit kernel.
At entry, the CPU must be in 32-bit protected mode with paging
disabled; a GDT must be loaded with the descriptors for selectors
__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
segment; __BOOS_CS must have execute/read permission, and __BOOT_DS
must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
address of the struct boot_params; %ebp, %edi and %ebx must be zero.
--------------------------------------------------------------------------- The additional fields in struct boot_params as a part of 32-bit boot
!!!!!!!!!!!!!!!WARNING!!!!!!!! protocol of kernel. These should be filled by bootloader or 16-bit
The zero page is a kernel internal data structure, not a stable ABI. It might change real-mode setup code of the kernel. References/settings to it mainly
without warning and the kernel has no way to detect old version of it. are in:
If you're writing some external code like a boot loader you should only use
the stable versioned real mode boot protocol described in boot.txt. Otherwise the kernel include/asm-x86/bootparam.h
might break you at any time.
!!!!!!!!!!!!!WARNING!!!!!!!!!!!
---------------------------------------------------------------------------- Offset Proto Name Meaning
/Size
Summary of boot_params layout (kernel point of view)
( collected by Hans Lermen and Martin Mares ) 000/040 ALL screen_info Text mode or frame buffer information
(struct screen_info)
The contents of boot_params are used to pass parameters from the 040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info)
16-bit realmode code of the kernel to the 32-bit part. References/settings 060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information
to it mainly are in: (struct ist_info)
080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
arch/i386/boot/setup.S 090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
arch/i386/boot/video.S 0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
arch/i386/kernel/head.S 140/080 ALL edid_info Video mode setup (struct edid_info)
arch/i386/kernel/setup.c 1C0/020 ALL efi_info EFI 32 information (struct efi_info)
1E0/004 ALL alk_mem_k Alternative mem check, in KB
1E4/004 ALL scratch Scratch field for the kernel setup code
Offset Type Description 1E8/001 ALL e820_entries Number of entries in e820_map (below)
------ ---- ----------- 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
0 32 bytes struct screen_info, SCREEN_INFO 1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
ATTENTION, overlaps the following !!! (below)
2 unsigned short EXT_MEM_K, extended memory size in Kb (from int 0x15) 290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
0x20 unsigned short CL_MAGIC, commandline magic number (=0xA33F) 2D0/A00 ALL e820_map E820 memory map table
0x22 unsigned short CL_OFFSET, commandline offset (array of struct e820entry)
Address of commandline is calculated: D00/1EC ALL eddbuf EDD data (array of struct edd_info)
0x90000 + contents of CL_OFFSET
(only taken, when CL_MAGIC = 0xA33F)
0x40 20 bytes struct apm_bios_info, APM_BIOS_INFO
0x60 16 bytes Intel SpeedStep (IST) BIOS support information
0x80 16 bytes hd0-disk-parameter from intvector 0x41
0x90 16 bytes hd1-disk-parameter from intvector 0x46
0xa0 16 bytes System description table truncated to 16 bytes.
( struct sys_desc_table_struct )
0xb0 - 0x13f Free. Add more parameters here if you really need them.
0x140- 0x1be EDID_INFO Video mode setup
0x1c4 unsigned long EFI system table pointer
0x1c8 unsigned long EFI memory descriptor size
0x1cc unsigned long EFI memory descriptor version
0x1d0 unsigned long EFI memory descriptor map pointer
0x1d4 unsigned long EFI memory descriptor map size
0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb
0x1e4 unsigned long Scratch field for the kernel setup code
0x1e8 char number of entries in E820MAP (below)
0x1e9 unsigned char number of entries in EDDBUF (below)
0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below)
0x1f1 char size of setup.S, number of sectors
0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0)
0x1f4 unsigned short size of compressed kernel-part in the
(b)zImage-file (in 16 byte units, rounded up)
0x1f6 unsigned short swap_dev (unused AFAIK)
0x1f8 unsigned short RAMDISK_FLAGS
0x1fa unsigned short VGA-Mode (old one)
0x1fc unsigned short ORIG_ROOT_DEV (high=Major, low=minor)
0x1ff char AUX_DEVICE_INFO
0x200 short jump to start of setup code aka "reserved" field.
0x202 4 bytes Signature for SETUP-header, ="HdrS"
0x206 unsigned short Version number of header format
Current version is 0x0201...
0x208 8 bytes (used by setup.S for communication with boot loaders,
look there)
0x210 char LOADER_TYPE, = 0, old one
else it is set by the loader:
0xTV: T=0 for LILO
1 for Loadlin
2 for bootsect-loader
3 for SYSLINUX
4 for ETHERBOOT
5 for ELILO
7 for GRuB
8 for U-BOOT
9 for Xen
V = version
0x211 char loadflags:
bit0 = 1: kernel is loaded high (bzImage)
bit7 = 1: Heap and pointer (see below) set by boot
loader.
0x212 unsigned short (setup.S)
0x214 unsigned long KERNEL_START, where the loader started the kernel
0x218 unsigned long INITRD_START, address of loaded ramdisk image
0x21c unsigned long INITRD_SIZE, size in bytes of ramdisk image
0x220 4 bytes (setup.S)
0x224 unsigned short setup.S heap end pointer
0x226 unsigned short zero_pad
0x228 unsigned long cmd_line_ptr
0x22c unsigned long ramdisk_max
0x230 16 bytes trampoline
0x290 - 0x2cf EDD_MBR_SIG_BUFFER (edd.S)
0x2d0 - 0xd00 E820MAP
0xd00 - 0xeff EDDBUF (edd.S) for disk signature read sector
0xd00 - 0xeeb EDDBUF (edd.S) for edd data
...@@ -6,9 +6,8 @@ config TRACE_IRQFLAGS_SUPPORT ...@@ -6,9 +6,8 @@ config TRACE_IRQFLAGS_SUPPORT
source "lib/Kconfig.debug" source "lib/Kconfig.debug"
config EARLY_PRINTK config EARLY_PRINTK
bool "Early printk" if EMBEDDED && DEBUG_KERNEL bool "Early printk" if EMBEDDED && DEBUG_KERNEL && X86_32
default y default y
depends on X86_32
help help
Write kernel log output directly into the VGA buffer or to a serial Write kernel log output directly into the VGA buffer or to a serial
port. port.
...@@ -91,7 +90,7 @@ config DOUBLEFAULT ...@@ -91,7 +90,7 @@ config DOUBLEFAULT
config IOMMU_DEBUG config IOMMU_DEBUG
bool "Enable IOMMU debugging" bool "Enable IOMMU debugging"
depends on IOMMU && DEBUG_KERNEL depends on GART_IOMMU && DEBUG_KERNEL
depends on X86_64 depends on X86_64
help help
Force the IOMMU to on even when you have less than 4GB of Force the IOMMU to on even when you have less than 4GB of
...@@ -113,7 +112,4 @@ config IOMMU_LEAK ...@@ -113,7 +112,4 @@ config IOMMU_LEAK
Add a simple leak tracer to the IOMMU code. This is useful when you Add a simple leak tracer to the IOMMU code. This is useful when you
are debugging a buggy device driver that leaks IOMMU mappings. are debugging a buggy device driver that leaks IOMMU mappings.
#config X86_REMOTE_DEBUG
# bool "kgdb debugging stub"
endmenu endmenu
...@@ -97,10 +97,6 @@ config X86_CMPXCHG ...@@ -97,10 +97,6 @@ config X86_CMPXCHG
bool bool
default y default y
config EARLY_PRINTK
bool
default y
config GENERIC_ISA_DMA config GENERIC_ISA_DMA
bool bool
default y default y
...@@ -479,8 +475,8 @@ config HPET_EMULATE_RTC ...@@ -479,8 +475,8 @@ config HPET_EMULATE_RTC
# Mark as embedded because too many people got it wrong. # Mark as embedded because too many people got it wrong.
# The code disables itself when not needed. # The code disables itself when not needed.
config IOMMU config GART_IOMMU
bool "IOMMU support" if EMBEDDED bool "GART IOMMU support" if EMBEDDED
default y default y
select SWIOTLB select SWIOTLB
select AGP select AGP
...@@ -687,7 +683,7 @@ source kernel/Kconfig.hz ...@@ -687,7 +683,7 @@ source kernel/Kconfig.hz
config K8_NB config K8_NB
def_bool y def_bool y
depends on AGP_AMD64 || IOMMU || (PCI && NUMA) depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
endmenu endmenu
......
...@@ -170,7 +170,7 @@ CONFIG_HOTPLUG_CPU=y ...@@ -170,7 +170,7 @@ CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set # CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y CONFIG_X86_MCE=y
......
...@@ -25,7 +25,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o ...@@ -25,7 +25,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o
obj-$(CONFIG_PM) += suspend_64.o obj-$(CONFIG_PM) += suspend_64.o
obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
obj-$(CONFIG_KPROBES) += kprobes_64.o obj-$(CONFIG_KPROBES) += kprobes_64.o
......
...@@ -20,14 +20,14 @@ ...@@ -20,14 +20,14 @@
#include <linux/ioport.h> #include <linux/ioport.h>
#include <asm/e820.h> #include <asm/e820.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include <asm/pci-direct.h> #include <asm/pci-direct.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/k8.h> #include <asm/k8.h>
int iommu_aperture; int gart_iommu_aperture;
int iommu_aperture_disabled __initdata = 0; int gart_iommu_aperture_disabled __initdata = 0;
int iommu_aperture_allowed __initdata = 0; int gart_iommu_aperture_allowed __initdata = 0;
int fallback_aper_order __initdata = 1; /* 64MB */ int fallback_aper_order __initdata = 1; /* 64MB */
int fallback_aper_force __initdata = 0; int fallback_aper_force __initdata = 0;
...@@ -204,14 +204,15 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) ...@@ -204,14 +204,15 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
return 0; return 0;
} }
void __init iommu_hole_init(void) void __init gart_iommu_hole_init(void)
{ {
int fix, num; int fix, num;
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base, last_aper_base = 0; u64 aper_base, last_aper_base = 0;
int valid_agp = 0; int valid_agp = 0;
if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) if (gart_iommu_aperture_disabled || !fix_aperture ||
!early_pci_allowed())
return; return;
printk(KERN_INFO "Checking aperture...\n"); printk(KERN_INFO "Checking aperture...\n");
...@@ -222,7 +223,7 @@ void __init iommu_hole_init(void) ...@@ -222,7 +223,7 @@ void __init iommu_hole_init(void)
continue; continue;
iommu_detected = 1; iommu_detected = 1;
iommu_aperture = 1; gart_iommu_aperture = 1;
aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
aper_size = (32 * 1024 * 1024) << aper_order; aper_size = (32 * 1024 * 1024) << aper_order;
......
...@@ -49,7 +49,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) ...@@ -49,7 +49,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* Intel-defined (#2) */ /* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */ /* VIA/Cyrix/Centaur-defined */
...@@ -59,10 +59,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) ...@@ -59,10 +59,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */ /* AMD-defined (#2) */
"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", "lahf_lm", "cmp_legacy", "svm", "extapic",
"altmovcr8", "abm", "sse4a", "cr8_legacy", "abm", "sse4a", "misalignsse",
"misalignsse", "3dnowprefetch", "3dnowprefetch", "osvw", "ibs", "sse5",
"osvw", "ibs", NULL, NULL, NULL, NULL, "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
......
...@@ -17,19 +17,19 @@ ...@@ -17,19 +17,19 @@
#include <asm/io_apic.h> #include <asm/io_apic.h>
#include <asm/apic.h> #include <asm/apic.h>
#ifdef CONFIG_IOMMU #ifdef CONFIG_GART_IOMMU
#include <asm/iommu.h> #include <asm/gart.h>
#endif #endif
static void __init via_bugs(void) static void __init via_bugs(void)
{ {
#ifdef CONFIG_IOMMU #ifdef CONFIG_GART_IOMMU
if ((end_pfn > MAX_DMA32_PFN || force_iommu) && if ((end_pfn > MAX_DMA32_PFN || force_iommu) &&
!iommu_aperture_allowed) { !gart_iommu_aperture_allowed) {
printk(KERN_INFO printk(KERN_INFO
"Looks like a VIA chipset. Disabling IOMMU." "Looks like a VIA chipset. Disabling IOMMU."
" Override with iommu=allowed\n"); " Override with iommu=allowed\n");
iommu_aperture_disabled = 1; gart_iommu_aperture_disabled = 1;
} }
#endif #endif
} }
......
...@@ -36,7 +36,7 @@ ...@@ -36,7 +36,7 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/scatterlist.h> #include <linux/scatterlist.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include <asm/calgary.h> #include <asm/calgary.h>
#include <asm/tce.h> #include <asm/tce.h>
#include <asm/pci-direct.h> #include <asm/pci-direct.h>
......
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/dmar.h> #include <linux/dmar.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include <asm/calgary.h> #include <asm/calgary.h>
int iommu_merge __read_mostly = 1; int iommu_merge __read_mostly = 1;
...@@ -275,7 +275,7 @@ __init int iommu_setup(char *p) ...@@ -275,7 +275,7 @@ __init int iommu_setup(char *p)
swiotlb = 1; swiotlb = 1;
#endif #endif
#ifdef CONFIG_IOMMU #ifdef CONFIG_GART_IOMMU
gart_parse_options(p); gart_parse_options(p);
#endif #endif
...@@ -298,8 +298,8 @@ void __init pci_iommu_alloc(void) ...@@ -298,8 +298,8 @@ void __init pci_iommu_alloc(void)
* The order of these functions is important for * The order of these functions is important for
* fall-back/fail-over reasons * fall-back/fail-over reasons
*/ */
#ifdef CONFIG_IOMMU #ifdef CONFIG_GART_IOMMU
iommu_hole_init(); gart_iommu_hole_init();
#endif #endif
#ifdef CONFIG_CALGARY_IOMMU #ifdef CONFIG_CALGARY_IOMMU
...@@ -321,7 +321,7 @@ static int __init pci_iommu_init(void) ...@@ -321,7 +321,7 @@ static int __init pci_iommu_init(void)
intel_iommu_init(); intel_iommu_init();
#ifdef CONFIG_IOMMU #ifdef CONFIG_GART_IOMMU
gart_iommu_init(); gart_iommu_init();
#endif #endif
......
...@@ -30,17 +30,17 @@ ...@@ -30,17 +30,17 @@
#include <asm/mtrr.h> #include <asm/mtrr.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/proto.h> #include <asm/proto.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/swiotlb.h> #include <asm/swiotlb.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/k8.h> #include <asm/k8.h>
unsigned long iommu_bus_base; /* GART remapping area (physical) */ static unsigned long iommu_bus_base; /* GART remapping area (physical) */
static unsigned long iommu_size; /* size of remapping area bytes */ static unsigned long iommu_size; /* size of remapping area bytes */
static unsigned long iommu_pages; /* .. and in pages */ static unsigned long iommu_pages; /* .. and in pages */
u32 *iommu_gatt_base; /* Remapping table */ static u32 *iommu_gatt_base; /* Remapping table */
/* If this is disabled the IOMMU will use an optimized flushing strategy /* If this is disabled the IOMMU will use an optimized flushing strategy
of only flushing when an mapping is reused. With it true the GART is flushed of only flushing when an mapping is reused. With it true the GART is flushed
...@@ -135,8 +135,8 @@ static void flush_gart(void) ...@@ -135,8 +135,8 @@ static void flush_gart(void)
/* Debugging aid for drivers that don't free their IOMMU tables */ /* Debugging aid for drivers that don't free their IOMMU tables */
static void **iommu_leak_tab; static void **iommu_leak_tab;
static int leak_trace; static int leak_trace;
int iommu_leak_pages = 20; static int iommu_leak_pages = 20;
void dump_leak(void) static void dump_leak(void)
{ {
int i; int i;
static int dump; static int dump;
...@@ -627,12 +627,12 @@ void __init gart_iommu_init(void) ...@@ -627,12 +627,12 @@ void __init gart_iommu_init(void)
return; return;
/* Did we detect a different HW IOMMU? */ /* Did we detect a different HW IOMMU? */
if (iommu_detected && !iommu_aperture) if (iommu_detected && !gart_iommu_aperture)
return; return;
if (no_iommu || if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) || (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
!iommu_aperture || !gart_iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) { (no_agp && init_k8_gatt(&info) < 0)) {
if (end_pfn > MAX_DMA32_PFN) { if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory " printk(KERN_ERR "WARNING more than 4GB of memory "
...@@ -733,9 +733,9 @@ void __init gart_parse_options(char *p) ...@@ -733,9 +733,9 @@ void __init gart_parse_options(char *p)
fix_aperture = 0; fix_aperture = 0;
/* duplicated from pci-dma.c */ /* duplicated from pci-dma.c */
if (!strncmp(p,"force",5)) if (!strncmp(p,"force",5))
iommu_aperture_allowed = 1; gart_iommu_aperture_allowed = 1;
if (!strncmp(p,"allowed",7)) if (!strncmp(p,"allowed",7))
iommu_aperture_allowed = 1; gart_iommu_aperture_allowed = 1;
if (!strncmp(p, "memaper", 7)) { if (!strncmp(p, "memaper", 7)) {
fallback_aper_force = 1; fallback_aper_force = 1;
p += 7; p += 7;
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/scatterlist.h> #include <linux/scatterlist.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/dma.h> #include <asm/dma.h>
......
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include <asm/swiotlb.h> #include <asm/swiotlb.h>
#include <asm/dma.h> #include <asm/dma.h>
......
...@@ -17,7 +17,7 @@ ...@@ -17,7 +17,7 @@
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
#include <asm/apic.h> #include <asm/apic.h>
#include <asm/iommu.h> #include <asm/gart.h>
/* /*
* Power off function, if any * Power off function, if any
......
...@@ -86,9 +86,6 @@ unsigned long mmu_cr4_features; ...@@ -86,9 +86,6 @@ unsigned long mmu_cr4_features;
/* for MCA, but anyone else can use it if they want */ /* for MCA, but anyone else can use it if they want */
unsigned int machine_id; unsigned int machine_id;
#ifdef CONFIG_MCA
EXPORT_SYMBOL(machine_id);
#endif
unsigned int machine_submodel_id; unsigned int machine_submodel_id;
unsigned int BIOS_revision; unsigned int BIOS_revision;
unsigned int mca_pentium_flag; unsigned int mca_pentium_flag;
......
...@@ -1040,7 +1040,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) ...@@ -1040,7 +1040,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* Intel-defined (#2) */ /* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */ /* VIA/Cyrix/Centaur-defined */
...@@ -1050,10 +1050,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) ...@@ -1050,10 +1050,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */ /* AMD-defined (#2) */
"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", "lahf_lm", "cmp_legacy", "svm", "extapic",
"altmovcr8", "abm", "sse4a", "cr8_legacy", "abm", "sse4a", "misalignsse",
"misalignsse", "3dnowprefetch", "3dnowprefetch", "osvw", "ibs", "sse5",
"osvw", "ibs", NULL, NULL, NULL, NULL, "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
......
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data); EXPORT_SYMBOL(node_data);
bootmem_data_t node0_bdata; static bootmem_data_t node0_bdata;
/* /*
* numa interface - we expect the numa architecture specific code to have * numa interface - we expect the numa architecture specific code to have
...@@ -404,7 +404,7 @@ void __init set_highmem_pages_init(int bad_ppro) ...@@ -404,7 +404,7 @@ void __init set_highmem_pages_init(int bad_ppro)
} }
#ifdef CONFIG_MEMORY_HOTPLUG #ifdef CONFIG_MEMORY_HOTPLUG
int paddr_to_nid(u64 addr) static int paddr_to_nid(u64 addr)
{ {
int nid; int nid;
unsigned long pfn = PFN_DOWN(addr); unsigned long pfn = PFN_DOWN(addr);
......
...@@ -56,9 +56,9 @@ config AGP_AMD ...@@ -56,9 +56,9 @@ config AGP_AMD
X on AMD Irongate, 761, and 762 chipsets. X on AMD Irongate, 761, and 762 chipsets.
config AGP_AMD64 config AGP_AMD64
tristate "AMD Opteron/Athlon64 on-CPU GART support" if !IOMMU tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
depends on AGP && X86 depends on AGP && X86
default y if IOMMU default y if GART_IOMMU
help help
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
......
...@@ -787,7 +787,7 @@ static void __exit agp_amd64_cleanup(void) ...@@ -787,7 +787,7 @@ static void __exit agp_amd64_cleanup(void)
/* On AMD64 the PCI driver needs to initialize this driver early /* On AMD64 the PCI driver needs to initialize this driver early
for the IOMMU, so it has to be called via a backdoor. */ for the IOMMU, so it has to be called via a backdoor. */
#ifndef CONFIG_IOMMU #ifndef CONFIG_GART_IOMMU
module_init(agp_amd64_init); module_init(agp_amd64_init);
module_exit(agp_amd64_cleanup); module_exit(agp_amd64_cleanup);
#endif #endif
......
...@@ -34,7 +34,7 @@ ...@@ -34,7 +34,7 @@
#include "intel-iommu.h" #include "intel-iommu.h"
#include <asm/proto.h> /* force_iommu in this header in x86-64*/ #include <asm/proto.h> /* force_iommu in this header in x86-64*/
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/iommu.h> #include <asm/gart.h>
#include "pci.h" #include "pci.h"
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
......
...@@ -434,7 +434,7 @@ int usb_sg_init ( ...@@ -434,7 +434,7 @@ int usb_sg_init (
if (dma) { if (dma) {
io->urbs [i]->transfer_dma = sg_dma_address (sg + i); io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
len = sg_dma_len (sg + i); len = sg_dma_len (sg + i);
#if defined(CONFIG_HIGHMEM) || defined(CONFIG_IOMMU) #if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
io->urbs[i]->transfer_buffer = NULL; io->urbs[i]->transfer_buffer = NULL;
#else #else
io->urbs[i]->transfer_buffer = sg_virt(&sg[i]); io->urbs[i]->transfer_buffer = sg_virt(&sg[i]);
......
#ifndef _ASM_X8664_IOMMU_H
#define _ASM_X8664_IOMMU_H 1
extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
extern int iommu_detected;
#ifdef CONFIG_GART_IOMMU
extern void gart_iommu_init(void);
extern void gart_iommu_shutdown(void);
extern void __init gart_parse_options(char *);
extern void gart_iommu_hole_init(void);
extern int fallback_aper_order;
extern int fallback_aper_force;
extern int gart_iommu_aperture;
extern int gart_iommu_aperture_allowed;
extern int gart_iommu_aperture_disabled;
extern int fix_aperture;
#else
#define gart_iommu_aperture 0
#define gart_iommu_aperture_allowed 0
static inline void gart_iommu_shutdown(void)
{
}
#endif
#endif
#ifndef _ASM_X8664_IOMMU_H #ifndef _ASM_X8664_GART_H
#define _ASM_X8664_IOMMU_H 1 #define _ASM_X8664_GART_H 1
extern void pci_iommu_shutdown(void); extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void); extern void no_iommu_init(void);
......
...@@ -37,7 +37,7 @@ extern int iommu_setup(char *opt); ...@@ -37,7 +37,7 @@ extern int iommu_setup(char *opt);
*/ */
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU) #if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME; dma_addr_t ADDR_NAME;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment