Staging: rar_register: fix checkpatch errors and debug program file

Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rar_register/rar_register.c

-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/kdev_t.h>
-#include <linux/semaphore.h>
-#include <linux/mm.h>
-#include <linux/poll.h>
-#include <linux/wait.h>
-#include <linux/ioctl.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/pagemap.h>
-#include <linux/pci.h>
-#include <linux/firmware.h>
-#include <linux/sched.h>
+/*
+ *  rar_register.c - An Intel Restricted Access Region register driver
+ *
+ *  Copyright(c) 2009 Intel Corporation. All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License as
+ *  published by the Free Software Foundation; either version 2 of the
+ *  License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ *  02111-1307, USA.
+ *
+ * -------------------------------------------------------------------
+ *  20091204 Mark Allyn <mark.a.allyn@intel.com>
+ *	     Ossama Othman <ossama.othman@intel.com>
+ *	Cleanup per feedback from Alan Cox and Arjan Van De Ven
+ *
+ *  20090806 Ossama Othman <ossama.othman@intel.com>
+ *      Return zero high address if upper 22 bits is zero.
+ *      Cleaned up checkpatch errors.
+ *      Clarified that driver is dealing with bus addresses.
+ *
+ *  20090702 Ossama Othman <ossama.othman@intel.com>
+ *      Removed unnecessary include directives
+ *      Cleaned up spinlocks.
+ *      Cleaned up logging.
+ *      Improved invalid parameter checks.
+ *      Fixed and simplified RAR address retrieval and RAR locking
+ *      code.
+ *
+ *  20090626 Mark Allyn <mark.a.allyn@intel.com>
+ *      Initial publish
+ */
+
+#define DEBUG 1
+
 #include "rar_register.h"
 
-/* The following defines are for the IPC process to retrieve RAR in */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
 
 /* === Lincroft Message Bus Interface === */
 /* Message Control Register */
 #define LNC_MCR_OFFSET 0xD0
 
+/* Maximum number of clients (other drivers using this driver) */
+#define MAX_RAR_CLIENTS 10
+
 /* Message Data Register */
 #define LNC_MDR_OFFSET 0xD4
 
@@ -46,50 +80,64 @@
 #define LNC_BRAR2L 0x14
 #define LNC_BRAR2H 0x15
 
+/* Moorestown supports three restricted access regions. */
+#define MRST_NUM_RAR 3
 
-/* This structure is only used during module initialization. */
-struct RAR_offsets {
-	int low; /* Register offset for low RAR physical address. */
-	int high; /* Register offset for high RAR physical address. */
-};
 
-struct pci_dev *rar_dev;
-static uint32_t registered;
+/* RAR Bus Address Range */
+struct RAR_address_range {
+	dma_addr_t low;
+	dma_addr_t high;
+};
 
-/* Moorestown supports three restricted access regions. */
-#define MRST_NUM_RAR 3
+/* Structure containing low and high RAR register offsets. */
+struct RAR_offsets {
+	u32 low;  /* Register offset for low  RAR bus address. */
+	u32 high; /* Register offset for high RAR bus address. */
+};
 
-struct RAR_address_struct rar_addr[MRST_NUM_RAR];
+struct client {
+	int (*client_callback)(void *client_data);
+	void *customer_data;
+	int client_called;
+	};
 
-/* prototype for init */
-static int __init rar_init_handler(void);
-static void __exit rar_exit_handler(void);
+static DEFINE_MUTEX(rar_mutex);
+static DEFINE_MUTEX(lnc_reg_mutex);
 
-/*
-  function that is activated on the successfull probe of the RAR device
-*/
-static int __devinit rar_probe(struct pci_dev *pdev,
-			       const struct pci_device_id *ent);
+struct RAR_device {
+	struct RAR_offsets const rar_offsets[MRST_NUM_RAR];
+	struct RAR_address_range rar_addr[MRST_NUM_RAR];
+	struct pci_dev *rar_dev;
+	bool registered;
+	};
 
-static const struct pci_device_id rar_pci_id_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4110) },
-	{ 0 }
+/* this platform has only one rar_device for 3 rar regions */
+static struct RAR_device my_rar_device = {
+	.rar_offsets = {
+		[0].low = LNC_BRAR0L,
+		[0].high = LNC_BRAR0H,
+		[1].low = LNC_BRAR1L,
+		[1].high = LNC_BRAR1H,
+		[2].low = LNC_BRAR2L,
+		[2].high = LNC_BRAR2H
+	}
 };
 
-MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl);
+/* this data is for handling requests from other drivers which arrive
+ * prior to this driver initializing
+ */
 
-/* field for registering driver to PCI device */
-static struct pci_driver rar_pci_driver = {
-	.name = "rar_driver",
-	.id_table = rar_pci_id_tbl,
-	.probe = rar_probe
-};
+static struct client clients[MAX_RAR_CLIENTS];
+static int num_clients;
 
-/* This function is used to retrieved RAR info using the IPC message
-   bus interface */
-static int memrar_get_rar_addr(struct pci_dev *pdev,
+/*
+ * This function is used to retrieved RAR info using the Lincroft
+ * message bus interface.
+ */
+static int retrieve_rar_addr(struct pci_dev *pdev,
 	int offset,
-			       u32 *addr)
+	dma_addr_t *addr)
 {
 	/*
 	 * ======== The Lincroft Message Bus Interface ========
@@ -133,7 +181,8 @@ static int memrar_get_rar_addr(struct pci_dev *pdev,
 	 *  register.
 	*/
 
-	int result = 0; /* result */
+	int result;
+
 	/* Construct control message */
 	u32 const message =
 		 (LNC_MESSAGE_READ_OPCODE << 24)
@@ -141,233 +190,401 @@ static int memrar_get_rar_addr(struct pci_dev *pdev,
 		 | (offset << 8)
 		 | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
 
-	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n", offset);
+	dev_dbg(&pdev->dev, "Offset for 'get' LNC MSG is %x\n", offset);
 
-	if (addr == 0)
+	if (addr == 0) {
+		WARN_ON(1);
 		return -EINVAL;
+	}
+
+	/*
+	* We synchronize access to the Lincroft MCR and MDR registers
+	* until BOTH the command is issued through the MCR register
+	* and the corresponding data is read from the MDR register.
+	* Otherwise a race condition would exist between accesses to
+	* both registers.
+	*/
+
+	mutex_lock(&lnc_reg_mutex);
 
 	/* Send the control message */
-	result = pci_write_config_dword(pdev,
-					LNC_MCR_OFFSET,
-					message);
+	result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message);
 
-	printk(KERN_WARNING "rar- result from send ctl register is %x\n",
-	       result);
+	dev_dbg(&pdev->dev, "Result from send ctl register is %x\n", result);
 
-	if (!result)
-		result = pci_read_config_dword(pdev,
-					       LNC_MDR_OFFSET,
-					       addr);
+	if (!result) {
+		result = pci_read_config_dword(pdev, LNC_MDR_OFFSET,
+			(u32 *)addr);
+		dev_dbg(&pdev->dev,
+			"Result from read data register is %x\n", result);
 
-	printk(KERN_WARNING "rar- result from read data register is %x\n",
-	       result);
+		dev_dbg(&pdev->dev,
+			"Value read from data register is %lx\n",
+			 (unsigned long)*addr);
+	}
 
-	printk(KERN_WARNING "rar- value read from data register is %x\n",
-	       *addr);
+	mutex_unlock(&lnc_reg_mutex);
 
-	if (result)
-		return -1;
-	else
-		return 0;
+	return result;
 }
 
-static int memrar_set_rar_addr(struct pci_dev *pdev,
+static int set_rar_address(struct pci_dev *pdev,
 	int offset,
-			       u32 addr)
+	dma_addr_t addr)
 {
 	/*
-	 * ======== The Lincroft Message Bus Interface ========
-	 * Lincroft registers may be obtained from the PCI
-	 * (the Host Bridge) using the Lincroft Message Bus
-	 * Interface.  That message bus interface is generally
-	 * comprised of two registers: a control register (MCR, 0xDO)
-	 * and a data register (MDR, 0xD4).
-	 *
-	 * The MCR (message control register) format is the following:
-	 *   1.  [31:24]: Opcode
-	 *   2.  [23:16]: Port
-	 *   3.  [15:8]: Register Offset
-	 *   4.  [7:4]: Byte Enables (use 0xF to set all of these bits
-	 *              to 1)
-	 *   5.  [3:0]: reserved
-	 *
-	 *  Read (0xD0) and write (0xE0) opcodes are written to the
-	 *  control register when reading and writing to Lincroft
-	 *  registers, respectively.
-	 *
-	 *  We're interested in registers found in the Lincroft
-	 *  B-unit.  The B-unit port is 0x3.
-	 *
-	 *  The six B-unit RAR register offsets we use are listed
-	 *  earlier in this file.
-	 *
-	 *  Lastly writing to the MCR register requires the "Byte
-	 *  enables" bits to be set to 1.  This may be achieved by
-	 *  writing 0xF at bit 4.
-	 *
-	 * The MDR (message data register) format is the following:
-	 *   1. [31:0]: Read/Write Data
-	 *
-	 *  Data being read from this register is only available after
-	 *  writing the appropriate control message to the MCR
-	 *  register.
-	 *
 	* Data being written to this register must be written before
 	* writing the appropriate control message to the MCR
 	* register.
+	* @note See rar_get_address() for a description of the
+	* message bus interface being used here.
 	*/
 
-	int result = 0; /* result */
+	int result = 0;
 
 	/* Construct control message */
-	u32 const message =
-	       (LNC_MESSAGE_WRITE_OPCODE << 24)
+	u32 const message = (LNC_MESSAGE_WRITE_OPCODE << 24)
 		| (LNC_BUNIT_PORT << 16)
 		| (offset << 8)
 		| (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
 
-	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n", offset);
-
-	if (addr == 0)
+	if (addr == 0) {
+		WARN_ON(1);
 		return -EINVAL;
+	}
+
+	dev_dbg(&pdev->dev, "Offset for 'set' LNC MSG is %x\n", offset);
+
+	/*
+	* We synchronize access to the Lincroft MCR and MDR registers
+	* until BOTH the command is issued through the MCR register
+	* and the corresponding data is read from the MDR register.
+	* Otherwise a race condition would exist between accesses to
+	* both registers.
+	*/
+
+	mutex_lock(&lnc_reg_mutex);
 
 	/* Send the control message */
-	result = pci_write_config_dword(pdev,
-					LNC_MDR_OFFSET,
-					addr);
+	result = pci_write_config_dword(pdev, LNC_MDR_OFFSET, addr);
 
-	printk(KERN_WARNING "rar- result from send ctl register is %x\n",
-	       result);
+	dev_dbg(&pdev->dev, "Result from write data register is %x\n", result);
+
+	if (!result) {
+		dev_dbg(&pdev->dev,
+			"Value written to data register is %lx\n",
+			 (unsigned long)addr);
 
-	if (!result)
-		result = pci_write_config_dword(pdev,
-						LNC_MCR_OFFSET,
-						message);
+		result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message);
 
-	printk(KERN_WARNING "rar- result from write data register is %x\n",
+		dev_dbg(&pdev->dev, "Result from send ctl register is %x\n",
 			result);
+	}
 
-	printk(KERN_WARNING "rar- value read to data register is %x\n",
-	       addr);
+	mutex_unlock(&lnc_reg_mutex);
 
-	if (result)
-		return -1;
-	else
-		return 0;
+	return result;
 }
 
 /*
-
- * Initialize RAR parameters, such as physical addresses, etc.
-
- */
-static int memrar_init_rar_params(struct pci_dev *pdev)
+* Initialize RAR parameters, such as bus addresses, etc.
+*/
+static int init_rar_params(struct pci_dev *pdev)
 {
-	struct RAR_offsets const offsets[] = {
-	       { LNC_BRAR0L, LNC_BRAR0H },
-	       { LNC_BRAR1L, LNC_BRAR1H },
-	       { LNC_BRAR2L, LNC_BRAR2H }
-	};
-
-	size_t const num_offsets = sizeof(offsets) / sizeof(offsets[0]);
-	struct RAR_offsets const *end = offsets + num_offsets;
-	struct RAR_offsets const *i;
-	unsigned int n = 0;
+	unsigned int i;
 	int result = 0;
 
-	/* Retrieve RAR start and end physical addresses. */
-
-	/*
+	/* Retrieve RAR start and end bus addresses.
 	* Access the RAR registers through the Lincroft Message Bus
 	* Interface on PCI device: 00:00.0 Host bridge.
 	*/
 
-	/* struct pci_dev *pdev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); */
-
-	if (pdev == NULL)
-		return -ENODEV;
+	for (i = 0; i < MRST_NUM_RAR; ++i) {
+		struct RAR_offsets const *offset =
+			&my_rar_device.rar_offsets[i];
+		struct RAR_address_range *addr = &my_rar_device.rar_addr[i];
 
-	for (i = offsets; i != end; ++i, ++n) {
-		if (memrar_get_rar_addr(pdev,
-					(*i).low,
-					&(rar_addr[n].low)) != 0
-		    || memrar_get_rar_addr(pdev,
-					   (*i).high,
-					   &(rar_addr[n].high)) != 0) {
+	if ((retrieve_rar_addr(pdev, offset->low, &addr->low) != 0)
+		|| (retrieve_rar_addr(pdev, offset->high, &addr->high) != 0)) {
 		result = -1;
 		break;
 		}
-	}
 
+		/*
+		* Only the upper 22 bits of the RAR addresses are
+		* stored in their corresponding RAR registers so we
+		* must set the lower 10 bits accordingly.
+
+		* The low address has its lower 10 bits cleared, and
+		* the high address has all its lower 10 bits set,
+		* e.g.:
+		* low = 0x2ffffc00
+		*/
+
+		addr->low &= (dma_addr_t)0xfffffc00u;
+
+		/*
+		* Set bits 9:0 on uppser address if bits 31:10 are non
+		* zero; otherwize clear all bits
+		*/
+
+		if ((addr->high & 0xfffffc00u) == 0)
+			addr->high = 0;
+		else
+			addr->high |= 0x3ffu;
+	}
 	/* Done accessing the device. */
-	/* pci_dev_put(pdev); */
 
 	if (result == 0) {
-		if (1) {
-			size_t z;
+		int z;
 		for (z = 0; z != MRST_NUM_RAR; ++z) {
-				printk(KERN_WARNING
-				       "rar - BRAR[%Zd] physical address low\n"
-				       "\tlow:  0x%08x\n"
-				       "\thigh: 0x%08x\n",
-				       z,
-				       rar_addr[z].low,
-				       rar_addr[z].high);
+			/*
+			* "BRAR" refers to the RAR registers in the
+			* Lincroft B-unit.
+			*/
+			dev_info(&pdev->dev, "BRAR[%u] bus address range = "
+			  "[%lx, %lx]\n", z,
+			  (unsigned long)my_rar_device.rar_addr[z].low,
+			  (unsigned long)my_rar_device.rar_addr[z].high);
 		}
 	}
+
+	return result;
+}
+
+/*
+ * The rar_get_address function is used by other device drivers
+ * to obtain RAR address information on a RAR. It takes three
+ * parameters:
+ *
+ * int rar_index
+ * The rar_index is an index to the rar for which you wish to retrieve
+ * the address information.
+ * Values can be 0,1, or 2.
+ *
+ * The function returns a 0 upon success or a -1 if there is no RAR
+ * facility on this system.
+ */
+int rar_get_address(int rar_index,
+	dma_addr_t *start_address,
+	dma_addr_t *end_address)
+{
+	int result = -ENODEV;
+
+	if (my_rar_device.registered) {
+		if (start_address == 0 || end_address == 0
+			|| rar_index >= MRST_NUM_RAR || rar_index < 0) {
+			result = -EINVAL;
+		} else {
+			*start_address =
+				my_rar_device.rar_addr[rar_index].low;
+			*end_address =
+				my_rar_device.rar_addr[rar_index].high;
+
+			result = 0;
+		}
 	}
 
 	return result;
 }
+EXPORT_SYMBOL(rar_get_address);
 
 /*
-  function that is activated on the successfull probe of the RAR device
+ * The rar_lock function is ued by other device drivers to lock an RAR.
+ * once an RAR is locked, it stays locked until the next system reboot.
+ * The function takes one parameter:
+ *
+ * int rar_index
+ * The rar_index is an index to the rar that you want to lock.
+ * Values can be 0,1, or 2.
+ *
+ * The function returns a 0 upon success or a -1 if there is no RAR
+ * facility on this system.
+ */
+int rar_lock(int rar_index)
+{
+	int result = -ENODEV;
+
+	if (rar_index >= MRST_NUM_RAR || rar_index < 0) {
+		result = -EINVAL;
+		return result;
+	}
+
+	dev_dbg(&my_rar_device.rar_dev->dev, "rar_lock mutex locking\n");
+	mutex_lock(&rar_mutex);
+
+	if (my_rar_device.registered) {
+
+		dma_addr_t low = my_rar_device.rar_addr[rar_index].low &
+			0xfffffc00u;
+
+		dma_addr_t high = my_rar_device.rar_addr[rar_index].high &
+			0xfffffc00u;
+
+		/*
+		* Only allow I/O from the graphics and Langwell;
+		* Not from the x96 processor
+		*/
+		if (rar_index == (int)RAR_TYPE_VIDEO) {
+			low |= 0x00000009;
+			high |= 0x00000015;
+		}
+
+		else if (rar_index == (int)RAR_TYPE_AUDIO) {
+			/* Only allow I/O from Langwell; nothing from x86 */
+			low |= 0x00000008;
+			high |= 0x00000018;
+		}
+
+		else
+			/* Read-only from all agents */
+			high |= 0x00000018;
+
+		/*
+		* Now program the register using the Lincroft message
+		* bus interface.
+		*/
+		result = set_rar_address(my_rar_device.rar_dev,
+			my_rar_device.rar_offsets[rar_index].low,
+			low);
+
+		if (result == 0)
+			result = set_rar_address(
+			my_rar_device.rar_dev,
+			my_rar_device.rar_offsets[rar_index].high,
+			high);
+	}
+
+	dev_dbg(&my_rar_device.rar_dev->dev, "rar_lock mutex unlocking\n");
+	mutex_unlock(&rar_mutex);
+	return result;
+}
+EXPORT_SYMBOL(rar_lock);
+
+/* The register_rar function is to used by other device drivers
+ * to ensure that this driver is ready. As we cannot be sure of
+ * the compile/execute order of dirvers in ther kernel, it is
+ * best to give this driver a callback function to call when
+ * it is ready to give out addresses. The callback function
+ * would have those steps that continue the initialization of
+ * a driver that do require a valid RAR address. One of those
+ * steps would be to call rar_get_address()
+ * This function return 0 on success an -1 on failure.
 */
-static int __devinit rar_probe(struct pci_dev *pdev,
-			       const struct pci_device_id *ent)
+int register_rar(int (*callback)(void *yourparameter), void *yourparameter)
 {
-	/* error */
-	int error;
 
-	/*------------------------
-	CODE
-	---------------------------*/
+	int result = -ENODEV;
+
+	if (callback == NULL)
+		return -EINVAL;
+
+	mutex_lock(&rar_mutex);
+
+	if (my_rar_device.registered) {
+
+		mutex_unlock(&rar_mutex);
+		/*
+		* if the driver already registered, then we can simply
+		* call the callback right now
+		*/
+
+		return (*callback)(yourparameter);
+	}
+
+	if (num_clients < MRST_NUM_RAR) {
+
+		clients[num_clients].client_callback = callback;
+		clients[num_clients].customer_data = yourparameter;
+		num_clients += 1;
+		result = 0;
+	}
+
+	mutex_unlock(&rar_mutex);
+	return result;
+
+}
+EXPORT_SYMBOL(register_rar);
+
+/*
+ * This function registers the driver with the device subsystem (
+ * either PCI, USB, etc).
+ * Function that is activaed on the succesful probe of the RAR device
+ * (Moorestown host controller).
+ */
+static int rar_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int error;
+	int counter;
 
-	DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
-	  "Rar pci probe starting\n");
-	error = 0;
+	dev_dbg(&dev->dev, "PCI probe starting\n");
 
 	/* enable the device */
-	error = pci_enable_device(pdev);
+	error = pci_enable_device(dev);
 	if (error) {
-		DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
-		  "error enabling pci device\n");
+		dev_err(&dev->dev,
+			"Error enabling RAR register PCI device\n");
 		goto end_function;
 	}
 
-	rar_dev = pdev;
-	registered = 1;
-
-	/* Initialize the RAR parameters, which have to be retrieved */
-	/* via the message bus service */
-	error = memrar_init_rar_params(rar_dev);
+	/* we have only one device; fill in the rar_device structure */
+	my_rar_device.rar_dev = dev;
 
+	/*
+	* Initialize the RAR parameters, which have to be retrieved
+	* via the message bus interface.
+	*/
+	error = init_rar_params(dev);
 	if (error) {
-		DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
-		  "error getting RAR addresses device\n");
-		registered = 0;
+		pci_disable_device(dev);
+
+		dev_err(&dev->dev,
+			"Error retrieving RAR addresses\n");
+
 		goto end_function;
 	}
 
+	dev_dbg(&dev->dev, "PCI probe locking\n");
+	mutex_lock(&rar_mutex);
+	my_rar_device.registered = 1;
+
+	/* now call anyone who has registered (using callbacks) */
+	for (counter = 0; counter < num_clients; counter += 1) {
+		if (clients[counter].client_callback) {
+			error = (*clients[counter].client_callback)(
+				clients[counter].customer_data);
+			/* set callback to NULL to indicate it has been done */
+			clients[counter].client_callback = NULL;
+				dev_dbg(&my_rar_device.rar_dev->dev,
+				"Callback called for %d\n",
+			counter);
+		}
+	}
+
+	dev_dbg(&dev->dev, "PCI probe unlocking\n");
+	mutex_unlock(&rar_mutex);
+
 end_function:
 
 	return error;
 }
 
-/*
-  this function registers the driver to
-  the device subsystem (either PCI, USB, etc)
-*/
+const struct pci_device_id rar_pci_id_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_RAR_DEVICE_ID) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl);
+
+const struct pci_device_id *my_id_table = rar_pci_id_tbl;
+
+/* field for registering driver to PCI device */
+static struct pci_driver rar_pci_driver = {
+	.name = "rar_register_driver",
+	.id_table = rar_pci_id_tbl,
+	.probe = rar_probe
+};
+
 static int __init rar_init_handler(void)
 {
 	return pci_register_driver(&rar_pci_driver);
@@ -382,59 +599,4 @@ module_init(rar_init_handler);
 module_exit(rar_exit_handler);
 
 MODULE_LICENSE("GPL");
-
-
-/* The get_rar_address function is used by other device drivers
- * to obtain RAR address information on a RAR. It takes two
- * parameter:
- *
- * int rar_index
- * The rar_index is an index to the rar for which you wish to retrieve
- * the address information.
- * Values can be 0,1, or 2.
- *
- * struct RAR_address_struct is a pointer to a place to which the function
- * can return the address structure for the RAR.
- *
- * The function returns a 0 upon success or a -1 if there is no RAR
- * facility on this system.
- */
-int get_rar_address(int rar_index, struct RAR_address_struct *addresses)
-{
-	if (registered && (rar_index < 3) && (rar_index >= 0)) {
-		*addresses = rar_addr[rar_index];
-		/* strip off lock bit information  */
-		addresses->low = addresses->low & 0xfffffff0;
-		addresses->high = addresses->high & 0xfffffff0;
-		return 0;
-	} else
-		return -ENODEV;
-}
-EXPORT_SYMBOL(get_rar_address);
-
-/* The lock_rar function is used by other device drivers to lock an RAR.
- * once an RAR is locked, it stays locked until the next system reboot.
- * The function takes one parameter:
- *
- * int rar_index
- * The rar_index is an index to the rar that you want to lock.
- * Values can be 0,1, or 2.
- *
- * The function returns a 0 upon success or a -1 if there is no RAR
- * facility on this system.
- */
-int lock_rar(int rar_index)
-{
-	u32 working_addr;
-	int result;
-
-	if (registered && (rar_index < 3) && (rar_index >= 0)) {
-		/* first make sure that lock bits are clear (this does lock) */
-		working_addr = rar_addr[rar_index].low & 0xfffffff0;
-
-		/* now send that value to the register using the IPC */
-		result = memrar_set_rar_addr(rar_dev, rar_index, working_addr);
-		return result;
-	} else
-		return -ENODEV;
-}
+MODULE_DESCRIPTION("Intel Restricted Access Region Register Driver");