Commit 44defeb3 authored by Jeff Kirsher's avatar Jeff Kirsher Committed by Jeff Garzik

e1000e: convert ndev_ printks to something smaller

The ndev_* printk's are too lenghty and we don't need to specify
the adapter/netdev struct at all, making this a lot more readable.
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 77970ea5
......@@ -41,24 +41,25 @@
struct e1000_info;
#define ndev_printk(level, netdev, format, arg...) \
printk(level "%s: " format, (netdev)->name, ## arg)
#define e_printk(level, adapter, format, arg...) \
printk(level "%s: %s: " format, pci_name(adapter->pdev), \
adapter->netdev->name, ## arg)
#ifdef DEBUG
#define ndev_dbg(netdev, format, arg...) \
ndev_printk(KERN_DEBUG , netdev, format, ## arg)
#define e_dbg(format, arg...) \
e_printk(KERN_DEBUG , adapter, format, ## arg)
#else
#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0)
#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
#endif
#define ndev_err(netdev, format, arg...) \
ndev_printk(KERN_ERR , netdev, format, ## arg)
#define ndev_info(netdev, format, arg...) \
ndev_printk(KERN_INFO , netdev, format, ## arg)
#define ndev_warn(netdev, format, arg...) \
ndev_printk(KERN_WARNING , netdev, format, ## arg)
#define ndev_notice(netdev, format, arg...) \
ndev_printk(KERN_NOTICE , netdev, format, ## arg)
#define e_err(format, arg...) \
e_printk(KERN_ERR, adapter, format, ## arg)
#define e_info(format, arg...) \
e_printk(KERN_INFO, adapter, format, ## arg)
#define e_warn(format, arg...) \
e_printk(KERN_WARNING, adapter, format, ## arg)
#define e_notice(format, arg...) \
e_printk(KERN_NOTICE, adapter, format, ## arg)
/* Tx/Rx descriptor defines */
......
......@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
"configuration\n");
e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
......@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
"configuration\n");
e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
......@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev,
* cannot be changed
*/
if (e1000_check_reset_block(hw)) {
ndev_err(netdev, "Cannot change link "
"characteristics when SoL/IDER is active.\n");
e_err("Cannot change link characteristics when SoL/IDER is "
"active.\n");
return -EINVAL;
}
......@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
netdev->features &= ~NETIF_F_TSO6;
}
ndev_info(netdev, "TSO is %s\n",
data ? "Enabled" : "Disabled");
e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->flags |= FLAG_TSO_FORCE;
return 0;
}
......@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
(test[pat] & write));
val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
if (val != (test[pat] & write & mask)) {
ndev_err(adapter->netdev, "pattern test reg %04X "
"failed: got 0x%08X expected 0x%08X\n",
reg + offset,
val, (test[pat] & write & mask));
e_err("pattern test reg %04X failed: got 0x%08X "
"expected 0x%08X\n", reg + offset, val,
(test[pat] & write & mask));
*data = reg;
return 1;
}
......@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
__ew32(&adapter->hw, reg, write & mask);
val = __er32(&adapter->hw, reg);
if ((write & mask) != (val & mask)) {
ndev_err(adapter->netdev, "set/check reg %04X test failed: "
"got 0x%08X expected 0x%08X\n", reg, (val & mask),
(write & mask));
e_err("set/check reg %04X test failed: got 0x%08X "
"expected 0x%08X\n", reg, (val & mask), (write & mask));
*data = reg;
return 1;
}
......@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
{
struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct net_device *netdev = adapter->netdev;
u32 value;
u32 before;
u32 after;
......@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
ew32(STATUS, toggle);
after = er32(STATUS) & toggle;
if (value != after) {
ndev_err(netdev, "failed STATUS register test got: "
"0x%08X expected: 0x%08X\n", after, value);
e_err("failed STATUS register test got: 0x%08X expected: "
"0x%08X\n", after, value);
*data = 1;
return 1;
}
......@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
*data = 1;
return -1;
}
ndev_info(netdev, "testing %s interrupt\n",
(shared_int ? "shared" : "unshared"));
e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
......@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
* sessions are active
*/
if (e1000_check_reset_block(&adapter->hw)) {
ndev_err(adapter->netdev, "Cannot do PHY loopback test "
"when SoL/IDER is active.\n");
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
}
......@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev,
forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
autoneg = adapter->hw.mac.autoneg;
ndev_info(netdev, "offline testing starting\n");
e_info("offline testing starting\n");
/*
* Link test performed before hardware reset so autoneg doesn't
......@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
ndev_info(netdev, "online testing starting\n");
e_info("online testing starting\n");
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
......@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
ndev_err(netdev, "Interface does not support "
"directed (unicast) frame wake-up packets\n");
e_err("Interface does not support directed (unicast) "
"frame wake-up packets\n");
}
if (adapter->wol & E1000_WUFC_EX)
......
......@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
* packet, also make sure the frame isn't just CRC only */
if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
/* All receives must fit into a single buffer */
ndev_dbg(netdev, "%s: Receive packet consumed "
"multiple buffers\n", netdev->name);
e_dbg("%s: Receive packet consumed multiple buffers\n",
netdev->name);
/* recycle */
buffer_info->skb = skb;
goto next_desc;
......@@ -576,11 +576,9 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
struct net_device *netdev = adapter->netdev;
/* detected Tx unit hang */
ndev_err(netdev,
"Detected Tx Unit Hang:\n"
e_err("Detected Tx Unit Hang:\n"
" TDH <%x>\n"
" TDT <%x>\n"
" next_to_use <%x>\n"
......@@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
buffer_info->dma = 0;
if (!(staterr & E1000_RXD_STAT_EOP)) {
ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
"up the full packet\n", netdev->name);
e_dbg("%s: Packet Split buffers didn't pick up the "
"full packet\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
......@@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->wb.middle.length0);
if (!length) {
ndev_dbg(netdev, "%s: Last part of the packet spanning"
" multiple descriptors\n", netdev->name);
e_dbg("%s: Last part of the packet spanning multiple "
"descriptors\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
......@@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* eth type trans needs skb->data to point to something */
if (!pskb_may_pull(skb, ETH_HLEN)) {
ndev_err(netdev, "pskb_may_pull failed.\n");
e_err("pskb_may_pull failed.\n");
dev_kfree_skb(skb);
goto next_desc;
}
......@@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev);
if (err) {
ndev_err(netdev,
"Unable to allocate %s interrupt (return: %d)\n",
adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
err);
e_err("Unable to allocate %s interrupt (return: %d)\n",
adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err);
if (adapter->flags & FLAG_MSI_ENABLED)
pci_disable_msi(adapter->pdev);
}
......@@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
return 0;
err:
vfree(tx_ring->buffer_info);
ndev_err(adapter->netdev,
"Unable to allocate memory for the transmit descriptor ring\n");
e_err("Unable to allocate memory for the transmit descriptor ring\n");
return err;
}
......@@ -1450,8 +1445,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
}
err:
vfree(rx_ring->buffer_info);
ndev_err(adapter->netdev,
"Unable to allocate memory for the transmit descriptor ring\n");
e_err("Unable to allocate memory for the transmit descriptor ring\n");
return err;
}
......@@ -2456,7 +2450,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
ew32(WUC, 0);
if (mac->ops.init_hw(hw))
ndev_err(adapter->netdev, "Hardware Error\n");
e_err("Hardware Error\n");
e1000_update_mng_vlan(adapter);
......@@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
return 0;
err:
ndev_err(netdev, "Unable to allocate memory for queues\n");
e_err("Unable to allocate memory for queues\n");
kfree(adapter->rx_ring);
kfree(adapter->tx_ring);
return -ENOMEM;
......@@ -2917,8 +2911,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
if (ret_val)
ndev_warn(adapter->netdev,
"Error reading PHY register\n");
e_warn("Error reading PHY register\n");
} else {
/*
* Do not read PHY registers if link is not up
......@@ -2943,11 +2936,9 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
u32 ctrl = er32(CTRL);
ndev_info(netdev,
"Link is Up %d Mbps %s, Flow Control: %s\n",
e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
adapter->link_speed,
(adapter->link_duplex == FULL_DUPLEX) ?
"Full Duplex" : "Half Duplex",
......@@ -2994,8 +2985,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
(er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
ndev_info(adapter->netdev,
"Gigabit has been disabled, downgrading speed\n");
e_info("Gigabit has been disabled, downgrading speed\n");
}
return link_active;
......@@ -3096,8 +3086,7 @@ static void e1000_watchdog_task(struct work_struct *work)
switch (adapter->link_speed) {
case SPEED_10:
case SPEED_100:
ndev_info(netdev,
"10/100 speed: disabling TSO\n");
e_info("10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO;
netdev->features &= ~NETIF_F_TSO6;
break;
......@@ -3130,7 +3119,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
ndev_info(netdev, "Link is Down\n");
e_info("Link is Down\n");
netif_carrier_off(netdev);
netif_tx_stop_all_queues(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
......@@ -3604,8 +3593,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
ndev_err(netdev,
"__pskb_pull_tail failed.\n");
e_err("__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
......@@ -3737,25 +3725,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
ndev_err(netdev, "Invalid MTU setting\n");
e_err("Invalid MTU setting\n");
return -EINVAL;
}
/* Jumbo frame size limits */
if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
ndev_err(netdev, "Jumbo Frames not supported.\n");
e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
if (adapter->hw.phy.type == e1000_phy_ife) {
ndev_err(netdev, "Jumbo Frames not supported.\n");
e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
}
#define MAX_STD_JUMBO_FRAME_SIZE 9234
if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
ndev_err(netdev, "MTU > 9216 not supported.\n");
e_err("MTU > 9216 not supported.\n");
return -EINVAL;
}
......@@ -3792,8 +3780,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
+ ETH_FCS_LEN;
ndev_info(netdev, "changing MTU from %d to %d\n",
netdev->mtu, new_mtu);
e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
if (netif_running(netdev))
......@@ -4175,8 +4162,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
u32 pba_num;
/* print bus type/speed/width info */
ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
"%02x:%02x:%02x:%02x:%02x:%02x\n",
e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
"Width x1"),
......@@ -4184,13 +4170,11 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
netdev->dev_addr[0], netdev->dev_addr[1],
netdev->dev_addr[2], netdev->dev_addr[3],
netdev->dev_addr[4], netdev->dev_addr[5]);
ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
(hw->phy.type == e1000_phy_ife)
? "10/100" : "1000");
e_info("Intel(R) PRO/%s Network Connection\n",
(hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
e1000e_read_pba_num(hw, &pba_num);
ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
hw->mac.type, hw->phy.type,
(pba_num >> 8), (pba_num & 0xff));
e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
}
/**
......@@ -4366,8 +4350,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
if (e1000_check_reset_block(&adapter->hw))
ndev_info(netdev,
"PHY reset is blocked due to SOL/IDER session.\n");
e_info("PHY reset is blocked due to SOL/IDER session.\n");
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
......@@ -4411,7 +4394,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
break;
if (i == 2) {
ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
e_err("The NVM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
......@@ -4419,14 +4402,13 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* copy the MAC address out of the NVM */
if (e1000e_read_mac_addr(&adapter->hw))
ndev_err(netdev, "NVM Read Error while reading MAC address\n");
e_err("NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
ndev_err(netdev, "Invalid MAC Address: "
"%02x:%02x:%02x:%02x:%02x:%02x\n",
e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
netdev->perm_addr[0], netdev->perm_addr[1],
netdev->perm_addr[2], netdev->perm_addr[3],
netdev->perm_addr[4], netdev->perm_addr[5]);
......
......@@ -27,6 +27,7 @@
*******************************************************************************/
#include <linux/netdevice.h>
#include <linux/pci.h>
#include "e1000.h"
......@@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option:
switch (*value) {
case OPTION_ENABLED:
ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
e_info("%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
e_info("%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
ndev_info(adapter->netdev,
"%s set to %i\n", opt->name, *value);
e_info("%s set to %i\n", opt->name, *value);
return 0;
}
break;
......@@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
ndev_info(adapter->netdev, "%s\n",
ent->str);
e_info("%s\n", ent->str);
return 0;
}
}
......@@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG();
}
ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
opt->name, *value, opt->err);
e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
opt->err);
*value = opt->def;
return -1;
}
......@@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value,
void __devinit e1000e_check_options(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
int bd = adapter->bd_number;
if (bd >= E1000_MAX_NIC) {
ndev_notice(netdev,
"Warning: no configuration for board #%i\n", bd);
ndev_notice(netdev, "Using defaults for all values\n");
e_notice("Warning: no configuration for board #%i\n", bd);
e_notice("Using defaults for all values\n");
}
{ /* Transmit Interrupt Delay */
......@@ -313,19 +310,15 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
adapter->itr = InterruptThrottleRate[bd];
switch (adapter->itr) {
case 0:
ndev_info(netdev, "%s turned off\n",
opt.name);
e_info("%s turned off\n", opt.name);
break;
case 1:
ndev_info(netdev,
"%s set to dynamic mode\n",
opt.name);
e_info("%s set to dynamic mode\n", opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
case 3:
ndev_info(netdev,
"%s set to dynamic conservative mode\n",
e_info("%s set to dynamic conservative mode\n",
opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment