kbuild: Remove export-objs := ... statements

One of the goals of the whole new modversions implementation:
export-objs is gone for good!

arch/alpha/kernel/Makefile

@@ -6,8 +6,6 @@ EXTRA_TARGETS	:= head.o
 
 EXTRA_AFLAGS	:= $(CFLAGS)
 
-export-objs := alpha_ksyms.o core_marvel.o core_titan.o
-
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o semaphore.o \
 	    alpha_ksyms.o systbls.o err_common.o

arch/arm/common/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs := sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
-
 obj-$(CONFIG_SA1111)	+= sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
 
 obj-$(CONFIG_PCI_HOST_PLX90X0)	+= plx90x0.o

arch/arm/kernel/Makefile

@@ -15,8 +15,6 @@ obj-m		:=
 obj-n		:=
 obj-		:=
 
-export-objs	:= armksyms.o apm.o dma.o ecard.o fiq.o io.o time.o
-
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o time-acorn.o
 obj-$(CONFIG_ARCH_CLPS7500)	+= time-acorn.o

arch/arm/mach-adifcc/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:=

arch/arm/mach-anakin/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-arc/Makefile

@@ -10,8 +10,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= oldlatches.o
-
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 
 EXTRA_TARGETS 		:= head.o

arch/arm/mach-clps7500/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-ebsa110/Makefile

@@ -9,6 +9,4 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= io.o
-
 obj-$(CONFIG_LEDS)	+= leds.o

arch/arm/mach-epxa10db/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-footbridge/Makefile

@@ -9,8 +9,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= arch.o netwinder-hw.o
-
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o
 pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o

arch/arm/mach-ftvpci/Makefile

@@ -9,7 +9,5 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 
-
 obj-$(CONFIG_PCI)	+= pci.o
 obj-$(CONFIG_LEDS)	+= leds.o

arch/arm/mach-iop310/Makefile

@@ -10,8 +10,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:=
-
 obj-$(CONFIG_ARCH_IQ80310) += iq80310-pci.o iq80310-irq.o
 
 ifneq ($(CONFIG_XSCALE_PMU_TIMER),y)

arch/arm/mach-l7200/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-pxa/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs := generic.o irq.o dma.o sa1111.o
-
 # Common support (must be linked before board specific support)
 obj-y += generic.o irq.o dma.o
 obj-$(CONFIG_SA1111) += sa1111.o

arch/arm/mach-rpc/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-sa1100/Makefile

@@ -9,8 +9,6 @@ obj-n :=
 obj-  :=
 led-y := leds.o
 
-export-objs := dma.o generic.o pm.o
-
 # This needs to be cleaned up.  We probably need to have SA1100
 # and SA1110 config symbols.
 ifeq ($(CONFIG_CPU_FREQ),y)
@@ -26,12 +24,10 @@ obj-$(CONFIG_SA1100_ADSBITSY)		+= adsbitsy.o
 led-$(CONFIG_SA1100_ADSBITSY)		+= leds-adsbitsy.o
 
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
-export-objs				+= assabet.o
 led-$(CONFIG_SA1100_ASSABET)		+= leds-assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
 
 obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-export-objs				+= badge4.o
 led-$(CONFIG_SA1100_BADGE4)		+= leds-badge4.o
 
 obj-$(CONFIG_SA1100_BRUTUS)		+= brutus.o
@@ -43,12 +39,9 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 obj-$(CONFIG_SA1100_EMPEG)		+= empeg.o
 
 obj-$(CONFIG_SA1100_FLEXANET)		+= flexanet.o
-export-objs				+= flexanet.o
 led-$(CONFIG_SA1100_FLEXANET)		+= leds-flexanet.o
 
 obj-$(CONFIG_SA1100_FREEBIRD)		+= freebird.o
-export-objs				+= freebird.o
-
 obj-$(CONFIG_SA1100_GRAPHICSCLIENT)	+= graphicsclient.o
 led-$(CONFIG_SA1100_GRAPHICSCLIENT)	+= leds-graphicsclient.o
 
@@ -56,13 +49,11 @@ obj-$(CONFIG_SA1100_GRAPHICSMASTER)	+= graphicsmaster.o
 led-$(CONFIG_SA1100_GRAPHICSMASTER)	+= leds-graphicsmaster.o
 
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
-export-objs				+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
 
 obj-$(CONFIG_SA1100_HUW_WEBPANEL)	+= huw_webpanel.o
-export-objs				+= huw_webpanel.o
 
 obj-$(CONFIG_SA1100_ITSY)		+= itsy.o
 
@@ -93,15 +84,12 @@ obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
 led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o  
 
 obj-$(CONFIG_SA1100_STORK)		+= stork.o
-export-objs				+= stork.o
 
 obj-$(CONFIG_SA1100_TRIZEPS)		+= trizeps.o
-export-objs				+= trizeps.o
 
 obj-$(CONFIG_SA1100_XP860)		+= xp860.o
 
 obj-$(CONFIG_SA1100_YOPY)		+= yopy.o
-export-objs				+= yopy.o
 
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)

arch/arm/mach-shark/Makefile

@@ -9,6 +9,4 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 
-
 obj-$(CONFIG_LEDS)	+= leds.o

arch/arm/mach-tbox/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mm/Makefile

@@ -8,8 +8,6 @@ obj-y		:= init.o extable.o fault-common.o
 obj-m		:=
 obj-n		:=
 obj-		:=
-export-objs	:= proc-syms.o discontig.o
-
 ifeq ($(CONFIG_CPU_32),y)
 obj-y		+= consistent.o fault-armv.o ioremap.o mm-armv.o
 obj-$(CONFIG_MODULES) += proc-syms.o

arch/cris/kernel/Makefile

@@ -5,8 +5,6 @@
 
 EXTRA_TARGETS	:= head.o
 
-export-objs := ksyms.o
-
 obj-y   := process.o signal.o entry.o traps.o irq.o \
            ptrace.o setup.o time.o sys_cris.o shadows.o \
 	   debugport.o semaphore.o

arch/i386/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS := head.o init_task.o
 
-export-objs     := mca.o i386_ksyms.o time.o
-
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
 		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o
@@ -34,5 +32,4 @@ obj-y				+= sysenter.o
 
 EXTRA_AFLAGS   := -traditional
 
-export-objs += scx200.o
 obj-$(CONFIG_SCx200)		+= scx200.o

arch/i386/kernel/cpu/mtrr/Makefile

@@ -3,4 +3,3 @@ obj-y		+= amd.o
 obj-y		+= cyrix.o
 obj-y		+= centaur.o
 
-export-objs	:= main.o

arch/i386/mach-voyager/Makefile

@@ -8,8 +8,6 @@
 # Note 2! The CFLAGS definitions are now in the main makefile...
 
 EXTRA_CFLAGS	+= -I../kernel
-export-objs	:=
-
 obj-y			:= setup.o voyager_basic.o voyager_thread.o
 
 obj-$(CONFIG_SMP)	+= voyager_smp.o voyager_cat.o

arch/i386/mm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux i386-specific parts of the memory manager.
 #
 
-export-objs := pageattr.o
-
 obj-y	:= init.o pgtable.o fault.o ioremap.o extable.o pageattr.o
 
 obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o

arch/ia64/hp/common/Makefile

@@ -5,6 +5,4 @@
 # Copyright (C) Alex Williamson (alex_williamson@hp.com)
 #
 
-export-objs := sba_iommu.o
-
 obj-y := sba_iommu.o

arch/ia64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs := ia64_ksyms.o
-
 obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o \
 	 irq.o irq_ia64.o irq_lsapic.o ivt.o \
 	 machvec.o pal.o process.o perfmon.o ptrace.o sal.o \

arch/ia64/lib/Makefile

@@ -4,8 +4,6 @@
 
 L_TARGET = lib.a
 
-export-objs := swiotlb.o
-
 obj-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o			\
 	checksum.o clear_page.o csum_partial_copy.o copy_page.o		\

arch/ia64/sn/io/Makefile

@@ -13,8 +13,6 @@ ifdef CONFIG_IA64_SGI_SN2
 EXTRA_CFLAGS    += -DSHUB_SWAP_WAR
 endif
 
-export-objs := hcl.o pci_dma.o
-
 obj-$(CONFIG_IA64_SGI_SN) += stubs.o sgi_if.o xswitch.o klgraph_hack.o \
 		hcl.o labelcl.o invent.o sgi_io_sim.o \
 		klgraph_hack.o hcl_util.o cdl.o hubdev.o hubspc.o \

arch/ia64/sn/kernel/Makefile

@@ -38,8 +38,6 @@ EXTRA_CFLAGS    := -DLITTLE_ENDIAN
 .S.o:
 	$(CC) $(AFLAGS) $(AFLAGS_KERNEL) -c -o $*.o $<
 
-export-objs = sn_ksyms.o iomv.o
-
 obj-y		= probe.o setup.o sn_asm.o sv.o bte.o iomv.o
 obj-$(CONFIG_IA64_SGI_SN1)      += irq.o mca.o
 obj-$(CONFIG_IA64_SGI_SN2)      += irq.o mca.o

arch/m68k/amiga/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-export-objs	:= amiga_ksyms.o
-
 obj-y		:= config.o amiints.o cia.o chipram.o amisound.o amiga_ksyms.o
 
 obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o

arch/m68k/atari/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/atari source directory
 #
 
-export-objs	:= atari_ksyms.o
-
 obj-y		:= config.o time.o debug.o ataints.o stdma.o \
 			atasound.o stram.o atari_ksyms.o
 

arch/m68k/kernel/Makefile

@@ -8,8 +8,6 @@ else
   EXTRA_TARGETS := sun3-head.o
 endif 
 
-export-objs	:= setup.o m68k_ksyms.o
-
 obj-y		:= entry.o process.o traps.o ints.o signal.o ptrace.o \
 			sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o
 

arch/m68k/mac/Makefile

@@ -2,7 +2,5 @@
 # Makefile for Linux arch/m68k/mac source directory
 #
 
-export-objs	:= mac_ksyms.o
-
 obj-y		:= config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
 			baboon.o macboing.o debug.o misc.o mac_ksyms.o

arch/m68k/mvme16x/Makefile

@@ -2,6 +2,4 @@
 # Makefile for Linux arch/m68k/mvme16x source directory
 #
 
-export-objs	:= mvme16x_ksyms.o
-
 obj-y		:= config.o 16xints.o rtc.o mvme16x_ksyms.o

arch/m68k/sun3/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/sun3 source directory
 #
 
-export-objs	:= sun3_ksyms.o
-
 obj-y	:= sun3_ksyms.o sun3ints.o sun3dvma.o sbus.o idprom.o
 
 obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o \

arch/m68k/sun3x/Makefile

@@ -2,6 +2,4 @@
 # Makefile for Linux arch/m68k/sun3x source directory
 #
 
-export-objs	:= sun3x_ksyms.o
-
 obj-y		:= config.o time.o dvma.o prom.o

arch/m68knommu/kernel/Makefile

@@ -2,8 +2,6 @@
 # Makefile for arch/m68knommu/kernel.
 #
 
-export-objs := m68k_ksyms.o
-
 obj-y += entry.o init_task.o ints.o m68k_ksyms.o process.o ptrace.o \
 	 semaphore.o setup.o signal.o syscalltable.o sys_m68k.o time.o \
 	 traps.o

arch/mips/au1000/common/Makefile

@@ -6,8 +6,6 @@
 # Makefile for the Alchemy Au1000 CPU, generic files.
 #
 
-export-objs := serial.o
-
 obj-y := prom.o dbg_io.o int-handler.o irq.o puts.o time.o reset.o
 
 obj-$(CONFIG_AU1000_UART) += serial.o             

arch/mips/baget/Makefile

@@ -3,7 +3,6 @@
 # under Linux.
 #
 
-export-objs		:= vacserial.o
 obj-y			:= baget.o print.o setup.o time.o irq.o bagetIRQ.o \
 			   reset.o wbflush.o
 obj-$(CONFIG_SERIAL)	+= vacserial.o

arch/mips/dec/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the DECstation family specific parts of the kernel
 #
 
-export-objs := wbflush.o
-
 obj-y	 := int-handler.o setup.o irq.o time.o reset.o rtc-dec.o wbflush.o
 
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o

arch/mips/kernel/Makefile

@@ -5,8 +5,6 @@
 # EXTRA_AFLAGS = -mips3 -mcpu=r4000 # not used?
 
 EXTRA_TARGETS	:= head.o init_task.o
-export-objs	:= mips_ksyms.o
-
 obj-y				+= branch.o process.o signal.o entry.o \
 				   traps.o ptrace.o vm86.o ioport.o reset.o \
 				   semaphore.o setup.o syscall.o sysmips.o \

arch/mips/mm/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the Linux/MIPS-specific parts of the memory manager.
 #
 
-export-objs			+= ioremap.o umap.o
 obj-y				+= extable.o init.o ioremap.o fault.o loadmmu.o
 
 obj-$(CONFIG_CPU_R3000)		+= r2300.o

arch/mips64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= mips64_ksyms.o
-
 obj-y	:= branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
 	   r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \
 	   scall_64.o semaphore.o setup.o signal.o softfp.o syscall.o \

arch/mips64/mm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux/MIPS-specific parts of the memory manager.
 #
 
-export-objs			+= umap.o
-
 obj-y				:= extable.o init.o fault.o loadmmu.o
 
 obj-$(CONFIG_CPU_R4300)		+= r4xx0.o

arch/parisc/kernel/Makefile

@@ -9,8 +9,6 @@ EXTRA_TARGETS	:= init_task.o pdc_cons.o process.o unaligned.o $(head-y)
 AFLAGS_entry.o	:= -traditional
 AFLAGS_pacache.o := -traditional
 
-export-objs	:= parisc_ksyms.o
-
 obj-y	     	:= cache.o pacache.o setup.o traps.o time.o irq.o \
 		   pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
 		   ptrace.o hardware.o inventory.o drivers.o semaphore.o \

arch/ppc/8xx_io/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux MPC8xx ppc-specific parts of comm processor
 #
 
-export-objs		:= fec.o
-
 obj-y			:= commproc.o uart.o
 
 obj-$(CONFIG_FEC_ENET)	+= fec.o

arch/ppc/amiga/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-export-objs	:= amiga_ksyms.o
-
 obj-y		:= config.o amiints.o cia.o time.o bootinfo.o amisound.o \
 			chipram.o amiga_ksyms.o
 

arch/ppc/kernel/Makefile

@@ -17,8 +17,6 @@ HEAD-$(CONFIG_6xx)		+= idle_6xx.o
 
 EXTRA_TARGETS	:= $(HEAD-y)
 
-export-objs			:= ppc_ksyms.o time.o
-
 obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
 					process.o signal.o ptrace.o align.o \
 					semaphore.o syscalls.o setup.o \

arch/ppc/lib/Makefile

@@ -2,8 +2,6 @@
 # Makefile for ppc-specific library files..
 #
 
-export-objs		:= dec_and_lock.o
-
 obj-y			:= checksum.o string.o strcase.o dec_and_lock.o div64.o
 
 obj-$(CONFIG_SMP)	+= locks.o

arch/ppc/ocp/Makefile

@@ -9,6 +9,5 @@
 #
 # NB: cribbed from the drivers/sbus/Makefile -- PMM
 
-export-objs := ocp.o ocp-driver.o ocp-probe.o
 obj-y   	+= ocp.o ocp-driver.o ocp-probe.o
 

arch/ppc/platforms/4xx/Makefile

 #
 # Makefile for the PowerPC 4xx linux kernel.
 
-export-objs			:= ibm405lp.o
-
 obj-$(CONFIG_ASH)		+= ash.o
 obj-$(CONFIG_BEECH)		+= beech.o 
 obj-$(CONFIG_CEDAR)		+= cedar.o

arch/ppc/platforms/Makefile

@@ -12,8 +12,6 @@ endif
 # Extra CFLAGS so we don't have to do relative includes
 CFLAGS_pmac_setup.o	+= -I$(TOPDIR)/arch/$(ARCH)/mm
 
-export-objs			:= prep_setup.o
-
 obj-$(CONFIG_APUS)		+= apus_setup.o
 ifeq ($(CONFIG_APUS),y)
 obj-$(CONFIG_PCI)		+= apus_pci.o

arch/ppc/syslib/Makefile

@@ -12,8 +12,6 @@ endif
 CFLAGS_prom_init.o      += -mrelocatable-lib
 CFLAGS_btext.o          += -mrelocatable-lib
 
-export-objs			:=  ppc4xx_dma.o ppc4xx_pm.o
-
 obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
 ifeq ($(CONFIG_4xx),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pic.o

arch/ppc64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_CFLAGS	+= -mno-minimal-toc
 EXTRA_TARGETS	:= head.o
-export-objs	:= ppc_ksyms.o
-
 obj-y               :=	setup.o entry.o traps.o irq.o idle.o \
 			time.o process.o signal.o syscalls.o misc.o ptrace.o \
 			align.o semaphore.o bitops.o stab.o htab.o pacaData.o \

arch/ppc64/lib/Makefile

@@ -4,7 +4,5 @@
 
 L_TARGET = lib.a
 
-export-objs := dec_and_lock.o
-
 obj-y := checksum.o dec_and_lock.o string.o strcase.o
 obj-y += copypage.o memcpy.o copyuser.o

arch/s390/kernel/Makefile

@@ -5,7 +5,6 @@
 EXTRA_TARGETS	:= head.o init_task.o
 EXTRA_AFLAGS	:= -traditional
 
-export-objs	:= debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o
 obj-y	:= entry.o bitmap.o traps.o time.o process.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
             semaphore.o reipl.o s390_ext.o debug.o

arch/s390x/kernel/Makefile

@@ -5,9 +5,6 @@
 EXTRA_TARGETS	:= head.o init_task.o
 EXTRA_AFLAGS	:= -traditional
 
-export-objs	:= debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o \
-		   exec32.o
-
 obj-y		:= entry.o bitmap.o traps.o time.o process.o \
 		   setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 		   semaphore.o reipl.o s390_ext.o debug.o

arch/sh/kernel/Makefile

@@ -4,9 +4,6 @@
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= io.o io_generic.o io_hd64465.o setup_hd64465.o sh_ksyms.o \
-		   io_adx.o io_bigsur.o io_cat68701.o hd64465_gpio.o
-
 obj-y	:= process.o signal.o entry.o traps.o irq.o irq_ipr.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \
 	irq_imask.o io.o io_generic.o sh_ksyms.o

arch/sparc/kernel/Makefile

@@ -6,7 +6,6 @@ EXTRA_TARGETS	:= head.o init_task.o
 
 EXTRA_AFLAGS	:= -ansi
 
-export-objs := sparc_ksyms.o
 IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
 obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    process.o signal.o ioport.o setup.o idprom.o \

arch/sparc64/kernel/Makefile

@@ -6,7 +6,6 @@ EXTRA_AFLAGS := -ansi
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= sparc64_ksyms.o ebus.o
 obj-y		:= process.o setup.o cpu.o idprom.o \
 		   traps.o devices.o auxio.o \
 		   irq.o ptrace.o time.o sys_sparc.o signal.o \

arch/um/drivers/Makefile

@@ -20,8 +20,6 @@ ubd-objs := ubd_kern.o ubd_user.o
 port-objs := port_kern.o port_user.o
 harddog-objs := harddog_kern.o harddog_user.o
 
-export-objs := mconsole_kern.o
-
 obj-y = 
 obj-$(CONFIG_SSL) += ssl.o 
 obj-$(CONFIG_UML_NET_SLIP) += slip.o

arch/um/kernel/Makefile

@@ -36,10 +36,6 @@ UNMAP_CFLAGS := $(patsubst -fprofile-arcs -ftest-coverage,,$(UNMAP_CFLAGS))
 DMODULES-$(CONFIG_MODULES) = -D__CONFIG_MODULES__
 DMODVERSIONS-$(CONFIG_MODVERSIONS) = -D__CONFIG_MODVERSIONS__
 
-export-objs-$(CONFIG_GPROF) += gprof_syms.o
-export-objs-$(CONFIG_GCOV) += gmon_syms.o
-
-export-objs := ksyms.o process_kern.o signal_kern.o $(export-objs-y)
 
 CFLAGS_user_syms.o = -D__AUTOCONF_INCLUDED__ $(DMODULES-y) $(DMODVERSIONS-y) \
 	-I/usr/include -I../include

arch/um/kernel/tt/Makefile

@@ -9,8 +9,6 @@ obj-y = exec_kern.o exec_user.o gdb.o gdb_kern.o ksyms.o mem.o process_kern.o \
 
 obj-$(CONFIG_PT_PROXY) += ptproxy/
 
-export-objs = ksyms.o
-
 USER_OBJS := $(filter %_user.o,$(obj-y)) gdb.o time.o tracer.o
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 

arch/um/sys-i386/Makefile

@@ -3,8 +3,6 @@ obj-y = bugs.o checksum.o extable.o fault.o ksyms.o ldt.o module.o \
 
 obj-$(CONFIG_HIGHMEM) += highmem.o
 
-export-objs = ksyms.o
-
 USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 

arch/v850/kernel/Makefile

@@ -13,8 +13,6 @@ EXTRA_TARGETS := head.o init_task.o
 
 obj-y += intv.o entry.o process.o syscalls.o time.o semaphore.o setup.o \
 	 signal.o irq.o mach.o ptrace.o bug.o
-export-objs += v850_ksyms.o rte_mb_a_pci.o
-
 obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
 # chip-specific code
 obj-$(CONFIG_V850E_MA1)		+= ma.o	nb85e_utils.o nb85e_timer_d.o

arch/x86_64/ia32/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-export-objs := ia32_ioctl.o sys_ia32.o
-
 obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
 	ia32_signal.o \
 	ia32_binfmt.o fpu32.o socket32.o ptrace32.o ipc32.o syscall32.o

arch/x86_64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS 	:= head.o head64.o init_task.o
 EXTRA_AFLAGS  := -traditional
-export-objs     := x8664_ksyms.o pci-gart.o pci-dma.o
-
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \
 		pci-dma.o x8664_ksyms.o i387.o syscall.o vsyscall.o \

arch/x86_64/kernel/mtrr/Makefile

@@ -7,8 +7,6 @@ obj-y		+= amd.o
 obj-y		+= cyrix.o
 obj-y		+= centaur.o
 
-export-objs	:= main.o
-
 $(obj)/main.c: $(obj)/mtrr.h
 	@ln -sf ../../../i386/kernel/cpu/mtrr/main.c $(obj)/main.c
 $(obj)/if.c: $(obj)/mtrr.h

arch/x86_64/lib/Makefile

@@ -3,8 +3,6 @@
 #
 
 L_TARGET := lib.a
-export-objs := io.o csum-wrappers.o csum-partial.o
-
 CFLAGS_csum-partial.o := -funroll-loops
 
 obj-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \

arch/x86_64/mm/Makefile

@@ -2,7 +2,5 @@
 # Makefile for the linux i386-specific parts of the memory manager.
 #
 
-export-objs := pageattr.o
-
 obj-y	 := init.o fault.o ioremap.o extable.o pageattr.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o

crypto/Makefile

@@ -2,8 +2,6 @@
 # Cryptographic API
 #
 
-export-objs := api.o hmac.o
-
 autoload-crypto-$(CONFIG_KMOD) = autoload.o
 proc-crypto-$(CONFIG_PROC_FS) = proc.o
 

drivers/acorn/scsi/Makefile

@@ -2,7 +2,6 @@
 # Makefile for drivers/acorn/scsi
 #
 
-export-objs		:= fas216.o queue.o msgqueue.o
 acornscsi_mod-objs	:= acornscsi.o acornscsi-io.o
 
 obj-$(CONFIG_SCSI_ACORNSCSI_3)	+= acornscsi_mod.o queue.o msgqueue.o

drivers/acpi/Makefile

@@ -12,8 +12,6 @@ endif
 
 EXTRA_CFLAGS	+= $(ACPI_CFLAGS)
 
-export-objs 	:= acpi_ksyms.o processor.o
-
 obj-y		:= acpi_ksyms.o 
 
 #

drivers/atm/Makefile

@@ -4,7 +4,6 @@
 
 EXTRA_CFLAGS := -g
 
-export-objs	:= uPD98402.o suni.o idt77105.o
 fore_200e-objs	:= fore200e.o
 host-progs	:= fore200e_mkfirm
 

drivers/base/Makefile

@@ -3,12 +3,6 @@
 obj-y			:= core.o sys.o interface.o power.o bus.o \
 			   driver.o class.o intf.o platform.o \
 			   cpu.o firmware.o
-
 obj-$(CONFIG_NUMA)	+= node.o  memblk.o
-
 obj-y			+= fs/
-
 obj-$(CONFIG_HOTPLUG)	+= hotplug.o
-
-export-objs	:= core.o power.o sys.o bus.o driver.o \
-			class.o intf.o platform.o firmware.o

drivers/base/fs/Makefile

 obj-y		:= device.o
 
-export-objs	:= device.o

drivers/block/Makefile

@@ -8,9 +8,6 @@
 # In the future, some of these should be built conditionally.
 #
 
-export-objs	:= elevator.o ll_rw_blk.o loop.o genhd.o acsi.o \
-		   scsi_ioctl.o deadline-iosched.o
-
 obj-y	:= elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o deadline-iosched.o
 
 obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o

drivers/block/paride/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs := paride.o
-
 obj-$(CONFIG_PARIDE)		+= paride.o
 obj-$(CONFIG_PARIDE_ATEN)	+= aten.o
 obj-$(CONFIG_PARIDE_BPCK)	+= bpck.o

drivers/cdrom/Makefile

@@ -3,22 +3,6 @@
 # 30 Jan 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
 # Rewritten to use lists instead of if-statements.
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs	:= cdrom.o
-
-
-
-# Object file lists.
-
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
-
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_BLK_DEV_IDECD)	+=              cdrom.o

drivers/char/Makefile

@@ -9,13 +9,6 @@ FONTMAPFILE = cp437.uni
 
 obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs     :=	busmouse.o vt.o generic_serial.o ip2main.o consolemap.o\
-			ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
-			selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o
-
 obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o consolemap.o consolemap_deftbl.o selection.o keyboard.o
 obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
 obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o

drivers/char/agp/Makefile

@@ -3,8 +3,6 @@
 # space ioctl interface to use agp memory.  It also adds a kernel interface
 # that other drivers could use to manipulate agp memory.
 
-export-objs := backend.o
-
 agpgart-y := backend.o frontend.o generic.o
 agpgart-$(CONFIG_AGP3) += generic-3.0.o
 agpgart-objs := $(agpgart-y)

drivers/char/ftape/lowlevel/Makefile

@@ -23,8 +23,6 @@
 #      driver for Linux.
 #
 
-export-objs := ftape_syms.o
-
 obj-$(CONFIG_FTAPE) += ftape.o
 
 ftape-objs := ftape-init.o fdc-io.o fdc-isr.o \

drivers/char/ftape/zftape/Makefile

@@ -27,8 +27,6 @@
 # ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should
 #                leave this enabled for compatibility with taper.
 
-export-objs := zftape_syms.o
-
 obj-$(CONFIG_ZFTAPE) += zftape.o
 
 zftape-objs := zftape-rw.o zftape-ctl.o zftape-read.o \

drivers/char/ipmi/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the ipmi drivers.
 #
 
-export-objs	:= ipmi_msghandler.o ipmi_watchdog.o
-
 ipmi_kcs_drv-objs := ipmi_kcs_sm.o ipmi_kcs_intf.o
 
 obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o

drivers/eisa/Makefile

@@ -2,8 +2,6 @@
 
 obj-$(CONFIG_EISA)	+= eisa-bus.o
 
-export-objs	:= eisa-bus.o
-
 clean-files:= devlist.h
 
 # Ugly hack to get DEVICE_NAME_SIZE value...

drivers/fc4/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux Fibre Channel device drivers.
 #
 
-export-objs := fc_syms.o
-
 fc4-objs := fc.o fc_syms.o
 
 obj-$(CONFIG_FC4) += fc4.o

drivers/hotplug/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux kernel pci hotplug controller drivers.
 #
 
-export-objs	:= pci_hotplug_core.o pci_hotplug_util.o cpci_hotplug_core.o
-
 obj-$(CONFIG_HOTPLUG_PCI)		+= pci_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)	+= cpqphp.o
 obj-$(CONFIG_HOTPLUG_PCI_IBM)		+= ibmphp.o

drivers/i2c/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the kernel i2c bus driver.
 #
 
-export-objs	:= i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
-		   i2c-algo-ite.o i2c-proc.o i2c-algo-ibm_ocp.o
-
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o

drivers/ide/Makefile

@@ -7,8 +7,6 @@
 # Note : at this point, these files are compiled on all systems.
 # In the future, some of these should be built conditionally.
 #
-export-objs := ide-iops.o ide-taskfile.o ide-proc.o ide.o ide-probe.o ide-dma.o ide-lib.o setup-pci.o ide-io.o
-
 # First come modules that register themselves with the core
 obj-$(CONFIG_BLK_DEV_IDEPCI)		+= pci/
 

drivers/ieee1394/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux IEEE 1394 implementation
 #
 
-export-objs := ieee1394_core.o ohci1394.o cmp.o
-
 ieee1394-objs := ieee1394_core.o ieee1394_transactions.o hosts.o \
 		 highlevel.o csr.o nodemgr.o oui.o dma.o iso.o
 

drivers/input/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the input core drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= input.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT)		+= input.o

drivers/input/gameport/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the gameport drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= gameport.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_GAMEPORT)		+= gameport.o

drivers/input/serio/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the input core drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= serio.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_SERIO)		+= serio.o

drivers/isdn/capi/Makefile

 # Makefile for the CAPI subsystem.
 
-# Objects that export symbols.
-
-export-objs	:= kcapi.o capiutil.o capilib.o capifs.o
-
 # Ordering constraints: kernelcapi.o first
 
 # Each configuration option enables a list of files.

drivers/isdn/eicon/Makefile

 # Makefile for the eicon ISDN device driver
 
-# Objects that export symbols.
-
-export-objs	:= Divas_mod.o eicon_mod.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_EICON_OLD)    	+= eicon.o

drivers/isdn/hardware/avm/Makefile

 # Makefile for the AVM ISDN device drivers
 
-# Objects that export symbols.
-
-export-objs	:= b1dma.o b1pcmcia.o b1.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_AVMB1_B1ISA)	+= b1isa.o b1.o

drivers/isdn/hardware/eicon/Makefile

 # Makefile for the Eicon DIVA ISDN drivers.
 
-# Objects that export symbols.
-
-export-objs     := diva_didd.o
-
 # Multipart objects. 
 
 divas-objs      := divasmain.o divasfunc.o di.o io.o istream.o diva.o dlist.o divasproc.o diva_dma.o

drivers/isdn/hisax/Makefile

@@ -4,10 +4,6 @@
 
 EXTRA_CFLAGS      += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
 
-# Objects that export symbols.
-
-export-objs	  := config.o hisax_isac.o hisax_hscx.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o

drivers/isdn/i4l/Makefile

 # Makefile for the kernel ISDN subsystem and device drivers.
 
-# Objects that export symbols.
-
-export-objs	:= isdn_common.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN)			+= isdn.o

drivers/macintosh/Makefile

@@ -2,17 +2,6 @@
 # Makefile for the Macintosh-specific device drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= adb.o mac_hid.o via-pmu.o
-
-# Object file lists.
-
-obj-y	:=
-obj-m	:=
-obj-n	:=
-obj-	:=
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_PMAC_PBOOK)	+= mediabay.o