Merge tag 'spi-nor/for-4.12-v2' of git://github.com/spi-nor/linux into MTD

From Cyrille:
"""
This pull request contains the following notable changes:
- fixes in the hisi SPI controller driver.
- fixes in the intel SPI controller driver.
- fixes in the Mediatek SPI controller driver.
- fixes to some SPI flash memories not supported the Chip Erase command.
- add support to some new memory parts (Winbond, Macronix, Micron, ESMT).
- add new driver for the STM32 QSPI controller.
"""

drivers/mtd/spi-nor/Kconfig

@@ -106,4 +106,11 @@ config SPI_INTEL_SPI_PLATFORM
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel-spi-platform.
 
+config SPI_STM32_QUADSPI
+	tristate "STM32 Quad SPI controller"
+	depends on ARCH_STM32
+	help
+	  This enables support for the STM32 Quad SPI controller.
+	  We only connect the NOR to this controller.
+
 endif # MTD_SPI_NOR

drivers/mtd/spi-nor/Makefile

@@ -8,3 +8,4 @@ obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
 obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
 obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
 obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o
+obj-$(CONFIG_SPI_STM32_QUADSPI)	+= stm32-quadspi.o
\ No newline at end of file

drivers/mtd/spi-nor/hisi-sfc.c

@@ -448,8 +448,11 @@ static int hisi_spi_nor_probe(struct platform_device *pdev)
 	if (!host->buffer)
 		return -ENOMEM;
 
+	ret = clk_prepare_enable(host->clk);
+	if (ret)
+		return ret;
+
 	mutex_init(&host->lock);
-	clk_prepare_enable(host->clk);
 	hisi_spi_nor_init(host);
 	ret = hisi_spi_nor_register_all(host);
 	if (ret)

drivers/mtd/spi-nor/intel-spi.c

@@ -704,7 +704,7 @@ static void intel_spi_fill_partition(struct intel_spi *ispi,
 		 * whole partition read-only to be on the safe side.
 		 */
 		if (intel_spi_is_protected(ispi, base, limit))
-			ispi->writeable = 0;
+			ispi->writeable = false;
 
 		end = (limit << 12) + 4096;
 		if (end > part->size)
@@ -728,7 +728,7 @@ struct intel_spi *intel_spi_probe(struct device *dev,
 
 	ispi->base = devm_ioremap_resource(dev, mem);
 	if (IS_ERR(ispi->base))
-		return ispi->base;
+		return ERR_CAST(ispi->base);
 
 	ispi->dev = dev;
 	ispi->info = info;

drivers/mtd/spi-nor/mtk-quadspi.c

@@ -104,6 +104,8 @@
 #define MTK_NOR_MAX_RX_TX_SHIFT		6
 /* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */
 #define MTK_NOR_MAX_SHIFT		7
+/* nor controller 4-byte address mode enable bit */
+#define MTK_NOR_4B_ADDR_EN		BIT(4)
 
 /* Helpers for accessing the program data / shift data registers */
 #define MTK_NOR_PRG_REG(n)		(MTK_NOR_PRGDATA0_REG + 4 * (n))
@@ -230,10 +232,35 @@ static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
 				  10000);
 }
 
+static void mt8173_nor_set_addr_width(struct mt8173_nor *mt8173_nor)
+{
+	u8 val;
+	struct spi_nor *nor = &mt8173_nor->nor;
+
+	val = readb(mt8173_nor->base + MTK_NOR_DUAL_REG);
+
+	switch (nor->addr_width) {
+	case 3:
+		val &= ~MTK_NOR_4B_ADDR_EN;
+		break;
+	case 4:
+		val |= MTK_NOR_4B_ADDR_EN;
+		break;
+	default:
+		dev_warn(mt8173_nor->dev, "Unexpected address width %u.\n",
+			 nor->addr_width);
+		break;
+	}
+
+	writeb(val, mt8173_nor->base + MTK_NOR_DUAL_REG);
+}
+
 static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
 {
 	int i;
 
+	mt8173_nor_set_addr_width(mt8173_nor);
+
 	for (i = 0; i < 3; i++) {
 		writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4);
 		addr >>= 8;

drivers/mtd/spi-nor/spi-nor.c

@@ -85,6 +85,7 @@ struct flash_info {
 					 * Use dedicated 4byte address op codes
 					 * to support memory size above 128Mib.
 					 */
+#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
 };
 
 #define JEDEC_MFR(info)	((info)->id[0])
@@ -960,6 +961,8 @@ static const struct flash_info spi_nor_ids[] = {
 
 	/* ESMT */
 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
 
 	/* Everspin */
 	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -1013,11 +1016,14 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
+	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
+	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
-	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K) },
+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
@@ -1031,10 +1037,11 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
+	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
@@ -1128,6 +1135,9 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4, SECT_4K) },
+	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4, SECT_4K) },
+	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4, SECT_4K) },
 	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
 	{
 		"w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
@@ -1629,6 +1639,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 		nor->flags |= SNOR_F_USE_FSR;
 	if (info->flags & SPI_NOR_HAS_TB)
 		nor->flags |= SNOR_F_HAS_SR_TB;
+	if (info->flags & NO_CHIP_ERASE)
+		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
 
 #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
 	/* prefer "small sector" erase if possible */