ata: add missing ATA_CMD_* defines

Add missing ATA_CMD_* defines to <linux/ata.h>.  Also add
ATA_EXABYTE_ENABLE_NEST, SETFEATURES_AAM_* and ATA_SMART_*
defines while at it.

Partially based on earlier work by Chris Wedgwood.
Acked-by: default avatarChris Wedgwood <cw@f00f.org>
Acked-by: default avatarJeff Garzik <jeff@garzik.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 37014c64
...@@ -222,6 +222,13 @@ enum { ...@@ -222,6 +222,13 @@ enum {
ATA_CMD_PMP_WRITE = 0xE8, ATA_CMD_PMP_WRITE = 0xE8,
ATA_CMD_CONF_OVERLAY = 0xB1, ATA_CMD_CONF_OVERLAY = 0xB1,
ATA_CMD_SEC_FREEZE_LOCK = 0xF5, ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
ATA_CMD_SMART = 0xB0,
ATA_CMD_MEDIA_LOCK = 0xDE,
ATA_CMD_MEDIA_UNLOCK = 0xDF,
/* marked obsolete in the ATA/ATAPI-7 spec */
ATA_CMD_RESTORE = 0x10,
/* EXABYTE specific */
ATA_EXABYTE_ENABLE_NEST = 0xF0,
/* READ_LOG_EXT pages */ /* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_SATA_NCQ = 0x10,
...@@ -262,6 +269,10 @@ enum { ...@@ -262,6 +269,10 @@ enum {
SETFEATURES_WC_ON = 0x02, /* Enable write cache */ SETFEATURES_WC_ON = 0x02, /* Enable write cache */
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
/* Enable/Disable Automatic Acoustic Management */
SETFEATURES_AAM_ON = 0x42,
SETFEATURES_AAM_OFF = 0xC2,
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
...@@ -284,6 +295,15 @@ enum { ...@@ -284,6 +295,15 @@ enum {
ATA_DCO_IDENTIFY = 0xC2, ATA_DCO_IDENTIFY = 0xC2,
ATA_DCO_SET = 0xC3, ATA_DCO_SET = 0xC3,
/* feature values for SMART */
ATA_SMART_ENABLE = 0xD8,
ATA_SMART_READ_VALUES = 0xD0,
ATA_SMART_READ_THRESHOLDS = 0xD1,
/* password used in LBA Mid / LBA High for executing SMART commands */
ATA_SMART_LBAM_PASS = 0x4F,
ATA_SMART_LBAH_PASS = 0xC2,
/* ATAPI stuff */ /* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0), ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment