ASoC: rt5670: Check sysclk source by private data

Currently, is_sys_clk_from_pll check sysclk source by reading codec
register value. And it will be invoked before updating dapm widget
power. In some machine driver, snd_soc_dai_set_sysclk is called in
dapm event to switch codec sysclk to RC clock in idle mode. And in
some use cases (such as syspend/resume) hw_params will not be called
when the dapm widget is powered up. As a result, is_sys_clk_from_pll
will return 0 although it is supposed to be 1.
To solve this, we let is_sys_clk_from_pll check sysclk sysclk_src
which is stored in private data and don't change the value of sysclk_src
when codec sysclk is switched to internal clock. The internal clock
can only be used in idle mode, so it sould be fine if we don't set
sysclk_src to internal clock.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt5670.c

@@ -517,11 +517,10 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
 static int is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
 			 struct snd_soc_dapm_widget *sink)
 {
-	unsigned int val;
+	struct snd_soc_codec *codec = source->codec;
+	struct rt5670_priv *rt5670 = snd_soc_codec_get_drvdata(codec);
 
-	val = snd_soc_read(source->codec, RT5670_GLB_CLK);
-	val &= RT5670_SCLK_SRC_MASK;
-	if (val == RT5670_SCLK_SRC_PLL1)
+	if (rt5670->sysclk_src == RT5670_SCLK_S_PLL1)
 		return 1;
 	else
 		return 0;
@@ -2270,9 +2269,6 @@ static int rt5670_set_dai_sysclk(struct snd_soc_dai *dai,
 	struct rt5670_priv *rt5670 = snd_soc_codec_get_drvdata(codec);
 	unsigned int reg_val = 0;
 
-	if (freq == rt5670->sysclk && clk_id == rt5670->sysclk_src)
-		return 0;
-
 	switch (clk_id) {
 	case RT5670_SCLK_S_MCLK:
 		reg_val |= RT5670_SCLK_SRC_MCLK;
@@ -2290,6 +2286,7 @@ static int rt5670_set_dai_sysclk(struct snd_soc_dai *dai,
 	snd_soc_update_bits(codec, RT5670_GLB_CLK,
 		RT5670_SCLK_SRC_MASK, reg_val);
 	rt5670->sysclk = freq;
+	if (clk_id != RT5670_SCLK_S_RCCLK)
 		rt5670->sysclk_src = clk_id;
 
 	dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id);