Commit 493adb1f authored by Wendy Xiong's avatar Wendy Xiong Committed by David S. Miller

bnx2x: Add PCIE EEH support

Add PCI recovery functions to the driver.  The initial PCI state is
also saved so the MSI state can be restored during PCI recovery.
Signed-off-by: default avatarWendy Xiong <wendyx@us.ibm.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f3c87cdd
......@@ -10181,6 +10181,94 @@ static int bnx2x_resume(struct pci_dev *pdev)
return rc;
}
/**
* bnx2x_io_error_detected - called when PCI error is detected
* @pdev: Pointer to PCI device
* @state: The current pci connection state
*
* This function is called after a PCI bus error affecting
* this device has been detected.
*/
static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2x *bp = netdev_priv(dev);
rtnl_lock();
netif_device_detach(dev);
if (netif_running(dev))
bnx2x_nic_unload(bp, UNLOAD_CLOSE);
pci_disable_device(pdev);
rtnl_unlock();
/* Request a slot reset */
return PCI_ERS_RESULT_NEED_RESET;
}
/**
* bnx2x_io_slot_reset - called after the PCI bus has been reset
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot.
*/
static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2x *bp = netdev_priv(dev);
rtnl_lock();
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset\n");
rtnl_unlock();
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
pci_restore_state(pdev);
if (netif_running(dev))
bnx2x_set_power_state(bp, PCI_D0);
rtnl_unlock();
return PCI_ERS_RESULT_RECOVERED;
}
/**
* bnx2x_io_resume - called when traffic can start flowing again
* @pdev: Pointer to PCI device
*
* This callback is called when the error recovery driver tells us that
* its OK to resume normal operation.
*/
static void bnx2x_io_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2x *bp = netdev_priv(dev);
rtnl_lock();
if (netif_running(dev))
bnx2x_nic_load(bp, LOAD_OPEN);
netif_device_attach(dev);
rtnl_unlock();
}
static struct pci_error_handlers bnx2x_err_handler = {
.error_detected = bnx2x_io_error_detected,
.slot_reset = bnx2x_io_slot_reset,
.resume = bnx2x_io_resume,
};
static struct pci_driver bnx2x_pci_driver = {
.name = DRV_MODULE_NAME,
.id_table = bnx2x_pci_tbl,
......@@ -10188,6 +10276,7 @@ static struct pci_driver bnx2x_pci_driver = {
.remove = __devexit_p(bnx2x_remove_one),
.suspend = bnx2x_suspend,
.resume = bnx2x_resume,
.err_handler = &bnx2x_err_handler,
};
static int __init bnx2x_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment