Commit 49cef10f authored by Philippe Reynes's avatar Philippe Reynes Committed by David S. Miller

net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: default avatarPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e8846a56
......@@ -3252,12 +3252,13 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
return config;
}
int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter,
struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 config = 0;
int status = 0;
u32 supported, advertising;
if (!test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
/* Get port configuration info */
......@@ -3271,45 +3272,48 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;
if (netif_running(adapter->netdev) && ahw->has_link_events) {
ethtool_cmd_speed_set(ecmd, ahw->link_speed);
ecmd->duplex = ahw->link_duplex;
ecmd->autoneg = ahw->link_autoneg;
ecmd->base.speed = ahw->link_speed;
ecmd->base.duplex = ahw->link_duplex;
ecmd->base.autoneg = ahw->link_autoneg;
} else {
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->base.speed = SPEED_UNKNOWN;
ecmd->base.duplex = DUPLEX_UNKNOWN;
ecmd->base.autoneg = AUTONEG_DISABLE;
}
ecmd->supported = (SUPPORTED_10baseT_Full |
supported = (SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_Autoneg);
if (ecmd->autoneg == AUTONEG_ENABLE) {
ethtool_convert_link_mode_to_legacy_u32(&advertising,
ecmd->link_modes.advertising);
if (ecmd->base.autoneg == AUTONEG_ENABLE) {
if (ahw->port_config & QLC_83XX_10_CAPABLE)
ecmd->advertising |= SUPPORTED_10baseT_Full;
advertising |= SUPPORTED_10baseT_Full;
if (ahw->port_config & QLC_83XX_100_CAPABLE)
ecmd->advertising |= SUPPORTED_100baseT_Full;
advertising |= SUPPORTED_100baseT_Full;
if (ahw->port_config & QLC_83XX_1G_CAPABLE)
ecmd->advertising |= SUPPORTED_1000baseT_Full;
advertising |= SUPPORTED_1000baseT_Full;
if (ahw->port_config & QLC_83XX_10G_CAPABLE)
ecmd->advertising |= SUPPORTED_10000baseT_Full;
advertising |= SUPPORTED_10000baseT_Full;
if (ahw->port_config & QLC_83XX_AUTONEG_ENABLE)
ecmd->advertising |= ADVERTISED_Autoneg;
advertising |= ADVERTISED_Autoneg;
} else {
switch (ahw->link_speed) {
case SPEED_10:
ecmd->advertising = SUPPORTED_10baseT_Full;
advertising = SUPPORTED_10baseT_Full;
break;
case SPEED_100:
ecmd->advertising = SUPPORTED_100baseT_Full;
advertising = SUPPORTED_100baseT_Full;
break;
case SPEED_1000:
ecmd->advertising = SUPPORTED_1000baseT_Full;
advertising = SUPPORTED_1000baseT_Full;
break;
case SPEED_10000:
ecmd->advertising = SUPPORTED_10000baseT_Full;
advertising = SUPPORTED_10000baseT_Full;
break;
default:
break;
......@@ -3319,56 +3323,58 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
switch (ahw->supported_type) {
case PORT_FIBRE:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
supported |= SUPPORTED_FIBRE;
advertising |= ADVERTISED_FIBRE;
ecmd->base.port = PORT_FIBRE;
break;
case PORT_TP:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
supported |= SUPPORTED_TP;
advertising |= ADVERTISED_TP;
ecmd->base.port = PORT_TP;
break;
case PORT_DA:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_DA;
ecmd->transceiver = XCVR_EXTERNAL;
supported |= SUPPORTED_FIBRE;
advertising |= ADVERTISED_FIBRE;
ecmd->base.port = PORT_DA;
break;
default:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_OTHER;
ecmd->transceiver = XCVR_EXTERNAL;
supported |= SUPPORTED_FIBRE;
advertising |= ADVERTISED_FIBRE;
ecmd->base.port = PORT_OTHER;
break;
}
ecmd->phy_address = ahw->physical_port;
ecmd->base.phy_address = ahw->physical_port;
ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
advertising);
return status;
}
int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter,
const struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 config = adapter->ahw->port_config;
int status = 0;
/* 83xx devices do not support Half duplex */
if (ecmd->duplex == DUPLEX_HALF) {
if (ecmd->base.duplex == DUPLEX_HALF) {
netdev_info(adapter->netdev,
"Half duplex mode not supported\n");
return -EINVAL;
}
if (ecmd->autoneg) {
if (ecmd->base.autoneg) {
ahw->port_config |= QLC_83XX_AUTONEG_ENABLE;
ahw->port_config |= (QLC_83XX_100_CAPABLE |
QLC_83XX_1G_CAPABLE |
QLC_83XX_10G_CAPABLE);
} else { /* force speed */
ahw->port_config &= ~QLC_83XX_AUTONEG_ENABLE;
switch (ethtool_cmd_speed(ecmd)) {
switch (ecmd->base.speed) {
case SPEED_10:
ahw->port_config &= ~(QLC_83XX_100_CAPABLE |
QLC_83XX_1G_CAPABLE |
......
......@@ -628,8 +628,10 @@ int qlcnic_83xx_set_port_eswitch_status(struct qlcnic_adapter *, int, int *);
void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
int qlcnic_83xx_extend_md_capab(struct qlcnic_adapter *);
int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter,
struct ethtool_link_ksettings *ecmd);
int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter,
const struct ethtool_link_ksettings *ecmd);
void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,
struct ethtool_pauseparam *);
int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *,
......
......@@ -285,42 +285,43 @@ qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
sizeof(drvinfo->version));
}
static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
static int qlcnic_82xx_get_link_ksettings(struct qlcnic_adapter *adapter,
struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 speed, reg;
int check_sfp_module = 0, err = 0;
u16 pcifn = ahw->pci_func;
u32 supported, advertising;
/* read which mode */
if (adapter->ahw->port_type == QLCNIC_GBE) {
ecmd->supported = (SUPPORTED_10baseT_Half |
supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ecmd->advertising = (ADVERTISED_100baseT_Half |
advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
ecmd->duplex = adapter->ahw->link_duplex;
ecmd->autoneg = adapter->ahw->link_autoneg;
ecmd->base.speed = adapter->ahw->link_speed;
ecmd->base.duplex = adapter->ahw->link_duplex;
ecmd->base.autoneg = adapter->ahw->link_autoneg;
} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val = 0;
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR, &err);
if (val == QLCNIC_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
supported = SUPPORTED_1000baseT_Full;
advertising = ADVERTISED_1000baseT_Full;
} else {
ecmd->supported = SUPPORTED_10000baseT_Full;
ecmd->advertising = ADVERTISED_10000baseT_Full;
supported = SUPPORTED_10000baseT_Full;
advertising = ADVERTISED_10000baseT_Full;
}
if (netif_running(adapter->netdev) && ahw->has_link_events) {
......@@ -331,73 +332,72 @@ static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
}
ethtool_cmd_speed_set(ecmd, ahw->link_speed);
ecmd->autoneg = ahw->link_autoneg;
ecmd->duplex = ahw->link_duplex;
ecmd->base.speed = ahw->link_speed;
ecmd->base.autoneg = ahw->link_autoneg;
ecmd->base.duplex = ahw->link_duplex;
goto skip;
}
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->base.speed = SPEED_UNKNOWN;
ecmd->base.duplex = DUPLEX_UNKNOWN;
ecmd->base.autoneg = AUTONEG_DISABLE;
} else
return -EIO;
skip:
ecmd->phy_address = adapter->ahw->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
ecmd->base.phy_address = adapter->ahw->physical_port;
switch (adapter->ahw->board_type) {
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
supported |= SUPPORTED_Autoneg;
advertising |= ADVERTISED_Autoneg;
case QLCNIC_BRDTYPE_P3P_10G_CX4:
case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->autoneg = adapter->ahw->link_autoneg;
supported |= SUPPORTED_TP;
advertising |= ADVERTISED_TP;
ecmd->base.port = PORT_TP;
ecmd->base.autoneg = adapter->ahw->link_autoneg;
break;
case QLCNIC_BRDTYPE_P3P_IMEZ:
case QLCNIC_BRDTYPE_P3P_XG_LOM:
case QLCNIC_BRDTYPE_P3P_HMEZ:
ecmd->supported |= SUPPORTED_MII;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_MII;
ecmd->autoneg = AUTONEG_DISABLE;
supported |= SUPPORTED_MII;
advertising |= ADVERTISED_MII;
ecmd->base.port = PORT_MII;
ecmd->base.autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
advertising |= ADVERTISED_TP;
supported |= SUPPORTED_TP;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
supported |= SUPPORTED_FIBRE;
advertising |= ADVERTISED_FIBRE;
ecmd->base.port = PORT_FIBRE;
ecmd->base.autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_TP:
if (adapter->ahw->port_type == QLCNIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |=
ecmd->base.autoneg = AUTONEG_DISABLE;
supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
ecmd->base.port = PORT_FIBRE;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
ecmd->advertising |=
ecmd->base.autoneg = AUTONEG_ENABLE;
supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
advertising |=
(ADVERTISED_TP | ADVERTISED_Autoneg);
ecmd->port = PORT_TP;
ecmd->base.port = PORT_TP;
}
break;
default:
......@@ -412,47 +412,52 @@ static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
ecmd->port = PORT_FIBRE;
ecmd->base.port = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
ecmd->port = PORT_TP;
ecmd->base.port = PORT_TP;
break;
default:
ecmd->port = PORT_OTHER;
ecmd->base.port = PORT_OTHER;
}
}
ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
advertising);
return 0;
}
static int qlcnic_get_settings(struct net_device *dev,
struct ethtool_cmd *ecmd)
static int qlcnic_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
if (qlcnic_82xx_check(adapter))
return qlcnic_82xx_get_settings(adapter, ecmd);
return qlcnic_82xx_get_link_ksettings(adapter, ecmd);
else if (qlcnic_83xx_check(adapter))
return qlcnic_83xx_get_settings(adapter, ecmd);
return qlcnic_83xx_get_link_ksettings(adapter, ecmd);
return -EIO;
}
static int qlcnic_set_port_config(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
const struct ethtool_link_ksettings *ecmd)
{
u32 ret = 0, config = 0;
/* read which mode */
if (ecmd->duplex)
if (ecmd->base.duplex)
config |= 0x1;
if (ecmd->autoneg)
if (ecmd->base.autoneg)
config |= 0x2;
switch (ethtool_cmd_speed(ecmd)) {
switch (ecmd->base.speed) {
case SPEED_10:
config |= (0 << 8);
break;
......@@ -475,7 +480,8 @@ static int qlcnic_set_port_config(struct qlcnic_adapter *adapter,
return ret;
}
static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
static int qlcnic_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *ecmd)
{
u32 ret = 0;
struct qlcnic_adapter *adapter = netdev_priv(dev);
......@@ -484,16 +490,16 @@ static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
return -EOPNOTSUPP;
if (qlcnic_83xx_check(adapter))
ret = qlcnic_83xx_set_settings(adapter, ecmd);
ret = qlcnic_83xx_set_link_ksettings(adapter, ecmd);
else
ret = qlcnic_set_port_config(adapter, ecmd);
if (!ret)
return ret;
adapter->ahw->link_speed = ethtool_cmd_speed(ecmd);
adapter->ahw->link_duplex = ecmd->duplex;
adapter->ahw->link_autoneg = ecmd->autoneg;
adapter->ahw->link_speed = ecmd->base.speed;
adapter->ahw->link_duplex = ecmd->base.duplex;
adapter->ahw->link_autoneg = ecmd->base.autoneg;
if (!netif_running(dev))
return 0;
......@@ -1822,8 +1828,6 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
}
const struct ethtool_ops qlcnic_ethtool_ops = {
.get_settings = qlcnic_get_settings,
.set_settings = qlcnic_set_settings,
.get_drvinfo = qlcnic_get_drvinfo,
.get_regs_len = qlcnic_get_regs_len,
.get_regs = qlcnic_get_regs,
......@@ -1850,10 +1854,11 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
.get_dump_flag = qlcnic_get_dump_flag,
.get_dump_data = qlcnic_get_dump_data,
.set_dump = qlcnic_set_dump,
.get_link_ksettings = qlcnic_get_link_ksettings,
.set_link_ksettings = qlcnic_set_link_ksettings,
};
const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
.get_settings = qlcnic_get_settings,
.get_drvinfo = qlcnic_get_drvinfo,
.get_regs_len = qlcnic_get_regs_len,
.get_regs = qlcnic_get_regs,
......@@ -1872,12 +1877,13 @@ const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
.set_coalesce = qlcnic_set_intr_coalesce,
.set_msglevel = qlcnic_set_msglevel,
.get_msglevel = qlcnic_get_msglevel,
.get_link_ksettings = qlcnic_get_link_ksettings,
};
const struct ethtool_ops qlcnic_ethtool_failed_ops = {
.get_settings = qlcnic_get_settings,
.get_drvinfo = qlcnic_get_drvinfo,
.set_msglevel = qlcnic_set_msglevel,
.get_msglevel = qlcnic_get_msglevel,
.set_dump = qlcnic_set_dump,
.get_link_ksettings = qlcnic_get_link_ksettings,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment