Commit 4afc05e5 authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds

[PATCH] cpia -maintainers update

parent 765af494
......@@ -23,7 +23,9 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* #define _CPIA_DEBUG_ define for verbose debug output */
/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
/* #define _CPIA_DEBUG_ 1 */
#include <linux/config.h>
#include <linux/module.h>
......@@ -1796,7 +1798,7 @@ static int do_command_extended(struct cam_data *cam, u16 command,
retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
if (retval)
LOG("%x - failed\n", command);
DBG("%x - failed\n", command);
return retval;
}
......@@ -2174,7 +2176,7 @@ static int parse_picture(struct cam_data *cam, int size)
}
if (ll == 1) {
if (*ibuf != EOL) {
LOG("EOL not found giving up after %d/%d"
DBG("EOL not found giving up after %d/%d"
" bytes\n", origsize-size, origsize);
return -1;
}
......@@ -3158,6 +3160,7 @@ static int reset_camera(struct cam_data *cam)
static void put_cam(struct cpia_camera_ops* ops)
{
if (ops->owner)
module_put(ops->owner);
}
......@@ -3173,16 +3176,15 @@ static int cpia_open(struct inode *inode, struct file *file)
return -ENODEV;
}
if (!try_module_get(cam->ops->owner))
return -ENODEV;
down(&cam->busy_lock);
err = -EBUSY;
if (cam->open_count > 0) {
DBG("Camera already open\n");
goto oops;
return -EBUSY;
}
if (!try_module_get(cam->ops->owner))
return -ENODEV;
down(&cam->busy_lock);
err = -ENOMEM;
if (!cam->raw_image) {
cam->raw_image = rvmalloc(CPIA_MAX_IMAGE_SIZE);
......@@ -3207,8 +3209,9 @@ static int cpia_open(struct inode *inode, struct file *file)
goto oops;
}
err = -EINTR;
if(signal_pending(current))
return -EINTR;
goto oops;
/* Set ownership of /proc/cpia/videoX to current user */
if(cam->proc_entry)
......@@ -3451,6 +3454,14 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
cam->params.colourParams.contrast = 80;
}
/* Adjust flicker control if necessary */
if(cam->params.flickerControl.allowableOverExposure < 0)
cam->params.flickerControl.allowableOverExposure =
-find_over_exposure(cam->params.colourParams.brightness);
if(cam->params.flickerControl.flickerMode != 0)
cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
/* queue command to update camera */
cam->cmd_queue |= COMMAND_SETCOLOURPARAMS;
up(&cam->param_lock);
......@@ -3600,7 +3611,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
{
int *frame = arg;
//DBG("VIDIOCSYNC: %d\n", frame);
//DBG("VIDIOCSYNC: %d\n", *frame);
if (*frame<0 || *frame >= FRAME_NUM) {
retval = -EINVAL;
......@@ -3628,52 +3639,53 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
}
case VIDIOCGCAPTURE:
{
struct video_capture *vc = arg;
DBG("VIDIOCGCAPTURE\n");
if (copy_to_user(arg, &cam->vc, sizeof(struct video_capture)))
retval = -EFAULT;
*vc = cam->vc;
break;
}
case VIDIOCSCAPTURE:
{
struct video_capture vc;
struct video_capture *vc = arg;
DBG("VIDIOCSCAPTURE\n");
if (copy_from_user(&vc, arg, sizeof(vc))) {
retval = -EFAULT;
break;
}
if (vc.decimation != 0) { /* How should this be used? */
if (vc->decimation != 0) { /* How should this be used? */
retval = -EINVAL;
break;
}
if (vc.flags != 0) { /* Even/odd grab not supported */
if (vc->flags != 0) { /* Even/odd grab not supported */
retval = -EINVAL;
break;
}
/* Clip to the resolution we can set for the ROI
(every 8 columns and 4 rows) */
vc.x = vc.x & ~(__u32)7;
vc.y = vc.y & ~(__u32)3;
vc.width = vc.width & ~(__u32)7;
vc.height = vc.height & ~(__u32)3;
vc->x = vc->x & ~(__u32)7;
vc->y = vc->y & ~(__u32)3;
vc->width = vc->width & ~(__u32)7;
vc->height = vc->height & ~(__u32)3;
if(vc.width == 0 || vc.height == 0 ||
vc.x + vc.width > cam->vw.width ||
vc.y + vc.height > cam->vw.height) {
if(vc->width == 0 || vc->height == 0 ||
vc->x + vc->width > cam->vw.width ||
vc->y + vc->height > cam->vw.height) {
retval = -EINVAL;
break;
}
DBG("%d,%d/%dx%d\n", vc.x,vc.y,vc.width, vc.height);
DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height);
down(&cam->param_lock);
cam->vc.x = vc.x;
cam->vc.y = vc.y;
cam->vc.width = vc.width;
cam->vc.height = vc.height;
cam->vc.x = vc->x;
cam->vc.y = vc->y;
cam->vc.width = vc->width;
cam->vc.height = vc->height;
set_vw_size(cam);
cam->cmd_queue |= COMMAND_SETFORMAT;
......@@ -3688,12 +3700,16 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file,
case VIDIOCGUNIT:
{
struct video_unit vu;
vu.video = cam->vdev.minor;
vu.vbi = VIDEO_NO_UNIT;
vu.radio = VIDEO_NO_UNIT;
vu.audio = VIDEO_NO_UNIT;
vu.teletext = VIDEO_NO_UNIT;
struct video_unit *vu = arg;
DBG("VIDIOCGUNIT\n");
vu->video = cam->vdev.minor;
vu->vbi = VIDEO_NO_UNIT;
vu->radio = VIDEO_NO_UNIT;
vu->audio = VIDEO_NO_UNIT;
vu->teletext = VIDEO_NO_UNIT;
break;
}
......@@ -3728,12 +3744,13 @@ static int cpia_ioctl(struct inode *inode, struct file *file,
return video_usercopy(inode, file, cmd, arg, cpia_do_ioctl);
}
/* FIXME */
static int cpia_mmap(struct file *file, struct vm_area_struct *vma)
{
struct video_device *dev = file->private_data;
unsigned long start = vma->vm_start;
unsigned long size = vma->vm_end-vma->vm_start;
unsigned long size = vma->vm_end - vma->vm_start;
unsigned long page, pos;
struct cam_data *cam = dev->priv;
int retval;
......@@ -3956,9 +3973,6 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve
printk(KERN_DEBUG "video_register_device failed\n");
return NULL;
}
#ifdef CONFIG_PROC_FS
create_proc_cpia_cam(camera);
#endif
/* get version information from camera: open/reset/close */
......@@ -3975,6 +3989,10 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve
/* close cpia */
camera->ops->close(camera->lowlevel_data);
#ifdef CONFIG_PROC_FS
create_proc_cpia_cam(camera);
#endif
printk(KERN_INFO " CPiA Version: %d.%02d (%d.%d)\n",
camera->params.version.firmwareVersion,
camera->params.version.firmwareRevision,
......@@ -3997,6 +4015,7 @@ void cpia_unregister_camera(struct cam_data *cam)
DBG("unregistering video\n");
video_unregister_device(&cam->vdev);
if (cam->open_count) {
put_cam(cam->ops);
DBG("camera open -- setting ops to NULL\n");
cam->ops = NULL;
}
......@@ -4019,9 +4038,6 @@ static int __init cpia_init(void)
proc_cpia_create();
#endif
#ifdef CONFIG_VIDEO_CPIA_PP
cpia_pp_init();
#endif
#ifdef CONFIG_KMOD
#ifdef CONFIG_VIDEO_CPIA_PP_MODULE
request_module("cpia_pp");
......@@ -4031,6 +4047,10 @@ static int __init cpia_init(void)
request_module("cpia_usb");
#endif
#endif /* CONFIG_KMOD */
#ifdef CONFIG_VIDEO_CPIA_PP
cpia_pp_init();
#endif
#ifdef CONFIG_VIDEO_CPIA_USB
cpia_usb_init();
#endif
......
......@@ -28,11 +28,15 @@
#define CPIA_MAJ_VER 1
#define CPIA_MIN_VER 2
#define CPIA_PATCH_VER 2
#define CPIA_PATCH_VER 3
#define CPIA_PP_MAJ_VER 1
#define CPIA_PP_MIN_VER 2
#define CPIA_PP_PATCH_VER 2
#define CPIA_PP_MAJ_VER CPIA_MAJ_VER
#define CPIA_PP_MIN_VER CPIA_MIN_VER
#define CPIA_PP_PATCH_VER CPIA_PATCH_VER
#define CPIA_USB_MAJ_VER CPIA_MAJ_VER
#define CPIA_USB_MIN_VER CPIA_MIN_VER
#define CPIA_USB_PATCH_VER CPIA_PATCH_VER
#define CPIA_MAX_FRAME_SIZE_UNALIGNED (352 * 288 * 4) /* CIF at RGB32 */
#define CPIA_MAX_FRAME_SIZE ((CPIA_MAX_FRAME_SIZE_UNALIGNED + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) /* align above to PAGE_SIZE */
......
This diff is collapsed.
......@@ -21,11 +21,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
/* #define _CPIA_DEBUG_ 1 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
......@@ -105,7 +107,7 @@ static struct cpia_camera_ops cpia_usb_ops = {
};
static LIST_HEAD(cam_list);
static spinlock_t cam_list_lock_usb = SPIN_LOCK_UNLOCKED;
static spinlock_t cam_list_lock_usb;
static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs)
{
......@@ -464,12 +466,14 @@ static int cpia_usb_close(void *privdata)
{
struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
ucpia->open = 0;
if(!ucpia)
return -ENODEV;
cpia_usb_free_resources(ucpia, 1);
ucpia->open = 0;
if (!ucpia->present)
kfree(ucpia);
/* ucpia->present = 0 protects against trying to reset the
* alt setting if camera is physically disconnected while open */
cpia_usb_free_resources(ucpia, ucpia->present);
return 0;
}
......@@ -565,7 +569,7 @@ static int cpia_probe(struct usb_interface *intf,
vfree(ucpia->buffers[0]);
ucpia->buffers[0] = NULL;
fail_alloc_0:
kfree(ucpia);
return -EIO;
}
......@@ -588,9 +592,6 @@ static struct usb_driver cpia_driver = {
.id_table = cpia_id_table,
};
/* don't use dev, it may be NULL! (see usb_cpia_cleanup) */
/* _disconnect from usb_cpia_cleanup is not necessary since usb_deregister */
/* will do it for us as well as passing a udev structure - jerdfelt */
static void cpia_disconnect(struct usb_interface *intf)
{
struct cam_data *cam = usb_get_intfdata(intf);
......@@ -606,12 +607,11 @@ static void cpia_disconnect(struct usb_interface *intf)
list_del(&cam->cam_data_list);
spin_unlock( &cam_list_lock_usb );
/* Don't even try to reset the altsetting if we're disconnected */
cpia_usb_free_resources(ucpia, 0);
ucpia->present = 0;
cpia_unregister_camera(cam);
if(ucpia->open)
cpia_usb_close(cam->lowlevel_data);
ucpia->curbuff->status = FRAME_ERROR;
......@@ -639,29 +639,25 @@ static void cpia_disconnect(struct usb_interface *intf)
ucpia->buffers[0] = NULL;
}
if (!ucpia->open) {
kfree(ucpia);
cam->lowlevel_data = NULL;
}
kfree(ucpia);
}
static int __init usb_cpia_init(void)
{
printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
CPIA_USB_MAJ_VER,CPIA_USB_MIN_VER,CPIA_USB_PATCH_VER);
spin_lock_init(&cam_list_lock_usb);
return usb_register(&cpia_driver);
}
static void __exit usb_cpia_cleanup(void)
{
/*
struct cam_data *cam;
while ((cam = cam_list) != NULL)
cpia_disconnect(NULL, cam);
*/
usb_deregister(&cpia_driver);
}
module_init (usb_cpia_init);
module_exit (usb_cpia_cleanup);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment