Merge tag 'cris-for-linus' of git://jni.nu/cris

Pull CRIS changes from Jesper Nilsson:
 "No major changes here, but fixes some compile errors for CRIS, some
  small style issues, some documentation and as a bonus nukes a couple
  of obsolete rtc-files and related code."

* tag 'cris-for-linus' of git://jni.nu/cris:
  cris: Remove old legacy "-traditional" flag from arch-v10/lib/Makefile
  CRIS: Remove legacy RTC drivers
  cris/mm/fault.c: Port OOM changes to do_page_fault
  cris:fix the wrong function declear
  CRIS: Add _sdata to vmlinux.lds.S
  cris: posix_types.h, include asm-generic/posix_types.h
  CRIS: Update documentation
  cris/arch-v32: cryptocop: Use kzalloc
  net:removed the unused variable
  cris:removed the unused variable
  CRISv32: Correct name of read_mostly section.

Documentation/cris/README

-Linux 2.4 on the CRIS architecture
-==================================
-$Id: README,v 1.7 2001/04/19 12:38:32 bjornw Exp $
+Linux on the CRIS architecture
+==============================
 
-This is a port of Linux 2.4 to Axis Communications ETRAX 100LX embedded 
-network CPU. For more information about CRIS and ETRAX please see further
-below.
+This is a port of Linux to Axis Communications ETRAX 100LX,
+ETRAX FS and ARTPEC-3 embedded network CPUs.
+
+For more information about CRIS and ETRAX please see further below.
 
 In order to compile this you need a version of gcc with support for the
 ETRAX chip family. Please see this link for more information on how to
 download the compiler and other tools useful when building and booting
 software for the ETRAX platform:
 
-http://developer.axis.com/doc/software/devboard_lx/install-howto.html
-
-<more specific information should come in this document later>
+http://developer.axis.com/wiki/doku.php?id=axis:install-howto-2_20
 
 What is CRIS ?
 --------------
 
 CRIS is an acronym for 'Code Reduced Instruction Set'. It is the CPU
 architecture in Axis Communication AB's range of embedded network CPU's,
-called ETRAX. The latest CPU is called ETRAX 100LX, where LX stands for
-'Linux' because the chip was designed to be a good host for the Linux
-operating system.
+called ETRAX.
 
 The ETRAX 100LX chip
 --------------------
 
-For reference, please see the press-release:
+For reference, please see the following link:
 
-http://www.axis.com/news/us/001101_etrax.htm
+http://www.axis.com/products/dev_etrax_100lx/index.htm
 
 The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad
 range of built-in interfaces, all with modern scatter/gather DMA.
@@ -55,16 +51,24 @@ I/O interfaces:
 	(not all interfaces are available at the same time due to chip pin
          multiplexing)
 
-The previous version of the ETRAX, the ETRAX 100, sits in almost all of
-Axis shipping thin-servers like the Axis 2100 web camera or the ETRAX 100
-developer-board. It lacks an MMU so the Linux we run on that is a version
-of uClinux (Linux 2.0 without MM-support) ported to the CRIS architecture.
-The new Linux 2.4 port has full MM and needs a CPU with an MMU, so it will
-not run on the ETRAX 100.
+ETRAX 100LX is CRISv10 architecture.
+
+
+The ETRAX FS and ARTPEC-3 chips
+-------------------------------
+
+The ETRAX FS is a 200MHz 32-bit RISC processor with on-chip 16kB
+I-cache and 16kB D-cache and with a wide range of device interfaces
+including multiple high speed serial ports and an integrated USB 1.1 PHY.
 
-A version of the Axis developer-board with ETRAX 100LX (running Linux
-2.4) is now available. For more information please see developer.axis.com.
+The ARTPEC-3 is a variant of the ETRAX FS with additional IO-units
+used by the Axis Communications network cameras.
 
+See below link for more information:
+
+http://www.axis.com/products/dev_etrax_fs/index.htm
+
+ETRAX FS and ARTPEC-3 are both CRISv32 architectures.
 
 Bootlog
 -------
@@ -182,10 +186,6 @@ SwapFree:            0 kB
 -rwxr-xr-x  1 342      100         16252  Jan 01 00:00 telnetd
 
 
-(All programs are statically linked to the libc at this point - we have not ported the
- shared libraries yet)
-
-
 
 
 

arch/cris/arch-v10/drivers/pcf8563.c

-/*
- * PCF8563 RTC
- *
- * From Phillips' datasheet:
- *
- * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interrupt output and voltage
- * low detector are also provided. All address and data are transferred
- * serially via two-line bidirectional I2C-bus. Maximum bus speed is
- * 400 kbits/s. The built-in word address register is incremented
- * automatically after each written or read byte.
- *
- * Copyright (c) 2002-2007, Axis Communications AB
- * All rights reserved.
- *
- * Author: Tobias Anderberg <tobiasa@axis.com>.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/bcd.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-#include "i2c.h"
-
-#define PCF8563_MAJOR 121	/* Local major number. */
-#define DEVICE_NAME "rtc"	/* Name which is registered in /proc/devices. */
-#define PCF8563_NAME "PCF8563"
-#define DRIVER_VERSION "$Revision: 1.24 $"
-
-/* I2C bus slave registers. */
-#define RTC_I2C_READ		0xa3
-#define RTC_I2C_WRITE		0xa2
-
-/* Two simple wrapper macros, saves a few keystrokes. */
-#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
-#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
-
-static DEFINE_MUTEX(pcf8563_mutex);
-static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
-
-static const unsigned char days_in_month[] =
-	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
-
-/* Cache VL bit value read at driver init since writing the RTC_SECOND
- * register clears the VL status.
- */
-static int voltage_low;
-
-static const struct file_operations pcf8563_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = pcf8563_unlocked_ioctl,
-	.llseek		= noop_llseek,
-};
-
-unsigned char
-pcf8563_readreg(int reg)
-{
-	unsigned char res = rtc_read(reg);
-
-	/* The PCF8563 does not return 0 for unimplemented bits. */
-	switch (reg) {
-	case RTC_SECONDS:
-	case RTC_MINUTES:
-		res &= 0x7F;
-		break;
-	case RTC_HOURS:
-	case RTC_DAY_OF_MONTH:
-		res &= 0x3F;
-		break;
-	case RTC_WEEKDAY:
-		res &= 0x07;
-		break;
-	case RTC_MONTH:
-		res &= 0x1F;
-		break;
-	case RTC_CONTROL1:
-		res &= 0xA8;
-		break;
-	case RTC_CONTROL2:
-		res &= 0x1F;
-		break;
-	case RTC_CLOCKOUT_FREQ:
-	case RTC_TIMER_CONTROL:
-		res &= 0x83;
-		break;
-	}
-	return res;
-}
-
-void
-pcf8563_writereg(int reg, unsigned char val)
-{
-	rtc_write(reg, val);
-}
-
-void
-get_rtc_time(struct rtc_time *tm)
-{
-	tm->tm_sec  = rtc_read(RTC_SECONDS);
-	tm->tm_min  = rtc_read(RTC_MINUTES);
-	tm->tm_hour = rtc_read(RTC_HOURS);
-	tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
-	tm->tm_wday = rtc_read(RTC_WEEKDAY);
-	tm->tm_mon  = rtc_read(RTC_MONTH);
-	tm->tm_year = rtc_read(RTC_YEAR);
-
-	if (tm->tm_sec & 0x80) {
-		printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time "
-		       "information is no longer guaranteed!\n", PCF8563_NAME);
-	}
-
-	tm->tm_year  = bcd2bin(tm->tm_year) +
-		       ((tm->tm_mon & 0x80) ? 100 : 0);
-	tm->tm_sec  &= 0x7F;
-	tm->tm_min  &= 0x7F;
-	tm->tm_hour &= 0x3F;
-	tm->tm_mday &= 0x3F;
-	tm->tm_wday &= 0x07; /* Not coded in BCD. */
-	tm->tm_mon  &= 0x1F;
-
-	tm->tm_sec = bcd2bin(tm->tm_sec);
-	tm->tm_min = bcd2bin(tm->tm_min);
-	tm->tm_hour = bcd2bin(tm->tm_hour);
-	tm->tm_mday = bcd2bin(tm->tm_mday);
-	tm->tm_mon = bcd2bin(tm->tm_mon);
-	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
-}
-
-int __init
-pcf8563_init(void)
-{
-	static int res;
-	static int first = 1;
-
-	if (!first)
-		return res;
-	first = 0;
-
-	/* Initiate the i2c protocol. */
-	res = i2c_init();
-	if (res < 0) {
-		printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
-		return res;
-	}
-
-	/*
-	 * First of all we need to reset the chip. This is done by
-	 * clearing control1, control2 and clk freq and resetting
-	 * all alarms.
-	 */
-	if (rtc_write(RTC_CONTROL1, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_CONTROL2, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
-		goto err;
-
-	/* Reset the alarms. */
-	if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
-		goto err;
-
-	/* Check for low voltage, and warn about it. */
-	if (rtc_read(RTC_SECONDS) & 0x80) {
-		voltage_low = 1;
-		printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-		       "date/time information is no longer guaranteed!\n",
-		       PCF8563_NAME);
-	}
-
-	return res;
-
-err:
-	printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-	res = -1;
-	return res;
-}
-
-void __exit
-pcf8563_exit(void)
-{
-	unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
-}
-
-/*
- * ioctl calls for this driver. Why return -ENOTTY upon error? Because
- * POSIX says so!
- */
-static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	/* Some sanity checks. */
-	if (_IOC_TYPE(cmd) != RTC_MAGIC)
-		return -ENOTTY;
-
-	if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
-		return -ENOTTY;
-
-	switch (cmd) {
-	case RTC_RD_TIME:
-	{
-		struct rtc_time tm;
-
-		mutex_lock(&rtc_lock);
-		memset(&tm, 0, sizeof tm);
-		get_rtc_time(&tm);
-
-		if (copy_to_user((struct rtc_time *) arg, &tm,
-				 sizeof tm)) {
-			mutex_unlock(&rtc_lock);
-			return -EFAULT;
-		}
-
-		mutex_unlock(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_SET_TIME:
-	{
-		int leap;
-		int year;
-		int century;
-		struct rtc_time tm;
-
-		memset(&tm, 0, sizeof tm);
-		if (!capable(CAP_SYS_TIME))
-			return -EPERM;
-
-		if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
-			return -EFAULT;
-
-		/* Convert from struct tm to struct rtc_time. */
-		tm.tm_year += 1900;
-		tm.tm_mon += 1;
-
-		/*
-		 * Check if tm.tm_year is a leap year. A year is a leap
-		 * year if it is divisible by 4 but not 100, except
-		 * that years divisible by 400 _are_ leap years.
-		 */
-		year = tm.tm_year;
-		leap = (tm.tm_mon == 2) &&
-			((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-
-		/* Perform some sanity checks. */
-		if ((tm.tm_year < 1970) ||
-		    (tm.tm_mon > 12) ||
-		    (tm.tm_mday == 0) ||
-		    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-		    (tm.tm_wday >= 7) ||
-		    (tm.tm_hour >= 24) ||
-		    (tm.tm_min >= 60) ||
-		    (tm.tm_sec >= 60))
-			return -EINVAL;
-
-		century = (tm.tm_year >= 2000) ? 0x80 : 0;
-		tm.tm_year = tm.tm_year % 100;
-
-		tm.tm_year = bin2bcd(tm.tm_year);
-		tm.tm_mon = bin2bcd(tm.tm_mon);
-		tm.tm_mday = bin2bcd(tm.tm_mday);
-		tm.tm_hour = bin2bcd(tm.tm_hour);
-		tm.tm_min = bin2bcd(tm.tm_min);
-		tm.tm_sec = bin2bcd(tm.tm_sec);
-		tm.tm_mon |= century;
-
-		mutex_lock(&rtc_lock);
-
-		rtc_write(RTC_YEAR, tm.tm_year);
-		rtc_write(RTC_MONTH, tm.tm_mon);
-		rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
-		rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-		rtc_write(RTC_HOURS, tm.tm_hour);
-		rtc_write(RTC_MINUTES, tm.tm_min);
-		rtc_write(RTC_SECONDS, tm.tm_sec);
-
-		mutex_unlock(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_VL_READ:
-		if (voltage_low) {
-			printk(KERN_ERR "%s: RTC Voltage Low - "
-			       "reliable date/time information is no "
-			       "longer guaranteed!\n", PCF8563_NAME);
-		}
-
-		if (copy_to_user((int *) arg, &voltage_low, sizeof(int)))
-			return -EFAULT;
-		return 0;
-
-	case RTC_VL_CLR:
-	{
-		/* Clear the VL bit in the seconds register in case
-		 * the time has not been set already (which would
-		 * have cleared it). This does not really matter
-		 * because of the cached voltage_low value but do it
-		 * anyway for consistency. */
-
-		int ret = rtc_read(RTC_SECONDS);
-
-		rtc_write(RTC_SECONDS, (ret & 0x7F));
-
-		/* Clear the cached value. */
-		voltage_low = 0;
-
-		return 0;
-	}
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	mutex_lock(&pcf8563_mutex);
-	ret = pcf8563_ioctl(filp, cmd, arg);
-	mutex_unlock(&pcf8563_mutex);
-
-	return ret;
-}
-
-static int __init pcf8563_register(void)
-{
-	if (pcf8563_init() < 0) {
-		printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
-		       "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-		return -1;
-	}
-
-	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-		printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n",
-		       PCF8563_NAME, PCF8563_MAJOR);
-		return -1;
-	}
-
-	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
-	       DRIVER_VERSION);
-
-	/* Check for low voltage, and warn about it. */
-	if (voltage_low) {
-		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-		       "information is no longer guaranteed!\n", PCF8563_NAME);
-	}
-
-	return 0;
-}
-
-module_init(pcf8563_register);
-module_exit(pcf8563_exit);

arch/cris/arch-v10/kernel/fasttimer.c

@@ -21,8 +21,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
-#include <asm/rtc.h>
-
 
 #include <arch/svinto.h>
 #include <asm/fasttimer.h>

arch/cris/arch-v10/kernel/kgdb.c

@@ -264,7 +264,7 @@ static int write_register (int regno, char *val);
 
 /* Write a value to a specified register in the stack of a thread other
    than the current thread. */
-static write_stack_register (int thread_id, int regno, char *valptr);
+static int write_stack_register(int thread_id, int regno, char *valptr);
 
 /* Read a value from a specified register in the register image. Returns the
    status of the read operation. The register value is returned in valptr. */

arch/cris/arch-v10/kernel/time.c

@@ -19,16 +19,12 @@
 #include <asm/signal.h>
 #include <asm/io.h>
 #include <asm/delay.h>
-#include <asm/rtc.h>
 #include <asm/irq_regs.h>
 
 /* define this if you need to use print_timestamp */
 /* it will make jiffies at 96 hz instead of 100 hz though */
 #undef USE_CASCADE_TIMERS
 
-extern int set_rtc_mmss(unsigned long nowtime);
-extern int have_rtc;
-
 unsigned long get_ns_in_jiffie(void)
 {
 	unsigned char timer_count, t1;
@@ -203,11 +199,6 @@ time_init(void)
 	 */
 	loops_per_usec = 50;
 
-	if(RTC_INIT() < 0)
-		have_rtc = 0;
-	else
-		have_rtc = 1;
-
 	/* Setup the etrax timers
 	 * Base frequency is 25000 hz, divider 250 -> 100 HZ
 	 * In normal mode, we use timer0, so timer1 is free. In cascade

arch/cris/arch-v10/lib/Makefile

@@ -2,8 +2,5 @@
 # Makefile for Etrax-specific library files..
 #
 
-
-EXTRA_AFLAGS := -traditional
-
 lib-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o
 

arch/cris/arch-v32/drivers/cryptocop.c

@@ -1394,11 +1394,10 @@ static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char
 
 	if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH;
 
-	p = kmalloc(padlen, alloc_flag);
+	p = kzalloc(padlen, alloc_flag);
 	if (!p) return -ENOMEM;
 
 	*p = 0x80;
-	memset(p+1, 0, padlen - 1);
 
 	DEBUG(printk("create_md5_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length));
 
@@ -1426,11 +1425,10 @@ static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, cha
 
 	if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH;
 
-	p = kmalloc(padlen, alloc_flag);
+	p = kzalloc(padlen, alloc_flag);
 	if (!p) return -ENOMEM;
 
 	*p = 0x80;
-	memset(p+1, 0, padlen - 1);
 
 	DEBUG(printk("create_sha1_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length));
 

arch/cris/arch-v32/kernel/ptrace.c

@@ -114,8 +114,6 @@ void user_disable_single_step(struct task_struct *child)
 void
 ptrace_disable(struct task_struct *child)
 {
-	unsigned long tmp;
-
 	/* Deconfigure SPC and S-bit. */
 	user_disable_single_step(child);
 	put_reg(child, PT_SPC, 0);

arch/cris/arch-v32/kernel/time.c

@@ -18,7 +18,6 @@
 #include <asm/signal.h>
 #include <asm/io.h>
 #include <asm/delay.h>
-#include <asm/rtc.h>
 #include <asm/irq.h>
 #include <asm/irq_regs.h>
 
@@ -67,7 +66,6 @@ unsigned long timer_regs[NR_CPUS] =
 };
 
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int have_rtc;
 
 #ifdef CONFIG_CPU_FREQ
 static int
@@ -265,11 +263,6 @@ void __init time_init(void)
 	 */
 	loops_per_usec = 50;
 
-	if(RTC_INIT() < 0)
-		have_rtc = 0;
-	else
-		have_rtc = 1;
-
 	/* Start CPU local timer. */
 	cris_timer_init();
 

arch/cris/include/arch-v32/arch/cache.h

@@ -7,7 +7,7 @@
 #define L1_CACHE_BYTES 32
 #define L1_CACHE_SHIFT 5
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 void flush_dma_list(dma_descr_data *descr);
 void flush_dma_descr(dma_descr_data *descr, int flush_buf);

arch/cris/include/asm/Kbuild

@@ -6,5 +6,4 @@ header-y += arch-v32/
 header-y += ethernet.h
 header-y += etraxgpio.h
 header-y += rs485.h
-header-y += rtc.h
 header-y += sync_serial.h

arch/cris/include/asm/posix_types.h

@@ -33,4 +33,6 @@ typedef int		__kernel_ptrdiff_t;
 typedef unsigned short	__kernel_old_dev_t;
 #define __kernel_old_dev_t __kernel_old_dev_t
 
+#include <asm-generic/posix_types.h>
+
 #endif /* __ARCH_CRIS_POSIX_TYPES_H */

arch/cris/include/asm/rtc.h

-
-#ifndef __RTC_H__
-#define __RTC_H__
-
-#ifdef CONFIG_ETRAX_DS1302
-   /* Dallas DS1302 clock/calendar register numbers. */
-#  define RTC_SECONDS      0
-#  define RTC_MINUTES      1
-#  define RTC_HOURS        2
-#  define RTC_DAY_OF_MONTH 3
-#  define RTC_MONTH        4
-#  define RTC_WEEKDAY      5
-#  define RTC_YEAR         6
-#  define RTC_CONTROL      7
-
-   /* Bits in CONTROL register. */
-#  define RTC_CONTROL_WRITEPROTECT	0x80
-#  define RTC_TRICKLECHARGER		8
-
-  /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
-#  define RTC_TCR_PATTERN	0xA0	/* 1010xxxx */
-#  define RTC_TCR_1DIOD		0x04	/* xxxx01xx */
-#  define RTC_TCR_2DIOD		0x08	/* xxxx10xx */
-#  define RTC_TCR_DISABLED	0x00	/* xxxxxx00 Disabled */
-#  define RTC_TCR_2KOHM		0x01	/* xxxxxx01 2KOhm */
-#  define RTC_TCR_4KOHM		0x02	/* xxxxxx10 4kOhm */
-#  define RTC_TCR_8KOHM		0x03	/* xxxxxx11 8kOhm */
-
-#elif defined(CONFIG_ETRAX_PCF8563)
-   /* I2C bus slave registers. */
-#  define RTC_I2C_READ		0xa3
-#  define RTC_I2C_WRITE		0xa2
-
-   /* Phillips PCF8563 registers. */
-#  define RTC_CONTROL1		0x00		/* Control/Status register 1. */
-#  define RTC_CONTROL2		0x01		/* Control/Status register 2. */
-#  define RTC_CLOCKOUT_FREQ	0x0d		/* CLKOUT frequency. */
-#  define RTC_TIMER_CONTROL	0x0e		/* Timer control. */
-#  define RTC_TIMER_CNTDOWN	0x0f		/* Timer countdown. */
-
-   /* BCD encoded clock registers. */
-#  define RTC_SECONDS		0x02
-#  define RTC_MINUTES		0x03
-#  define RTC_HOURS		0x04
-#  define RTC_DAY_OF_MONTH	0x05
-#  define RTC_WEEKDAY		0x06	/* Not coded in BCD! */
-#  define RTC_MONTH		0x07
-#  define RTC_YEAR		0x08
-#  define RTC_MINUTE_ALARM	0x09
-#  define RTC_HOUR_ALARM	0x0a
-#  define RTC_DAY_ALARM		0x0b
-#  define RTC_WEEKDAY_ALARM 0x0c
-
-#endif
-
-#ifdef CONFIG_ETRAX_DS1302
-extern unsigned char ds1302_readreg(int reg);
-extern void ds1302_writereg(int reg, unsigned char val);
-extern int ds1302_init(void);
-#  define CMOS_READ(x) ds1302_readreg(x)
-#  define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
-#  define RTC_INIT() ds1302_init()
-#elif defined(CONFIG_ETRAX_PCF8563)
-extern unsigned char pcf8563_readreg(int reg);
-extern void pcf8563_writereg(int reg, unsigned char val);
-extern int pcf8563_init(void);
-#  define CMOS_READ(x) pcf8563_readreg(x)
-#  define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val)
-#  define RTC_INIT() pcf8563_init()
-#else
-  /* No RTC configured so we shouldn't try to access any. */
-#  define CMOS_READ(x) 42
-#  define CMOS_WRITE(x,y)
-#  define RTC_INIT() (-1)
-#endif
-
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-struct rtc_time {
-	int tm_sec;
-	int tm_min;
-	int tm_hour;
-	int tm_mday;
-	int tm_mon;
-	int tm_year;
-	int tm_wday;
-	int tm_yday;
-	int tm_isdst;
-};
-
-/* ioctl() calls that are permitted to the /dev/rtc interface. */
-#define RTC_MAGIC 'p'
-/* Read RTC time. */
-#define RTC_RD_TIME		_IOR(RTC_MAGIC, 0x09, struct rtc_time)
-/* Set RTC time. */
-#define RTC_SET_TIME		_IOW(RTC_MAGIC, 0x0a, struct rtc_time)
-#define RTC_SET_CHARGE		_IOW(RTC_MAGIC, 0x0b, int)
-/* Voltage low detector */
-#define RTC_VL_READ		_IOR(RTC_MAGIC, 0x13, int)
-/* Clear voltage low information */
-#define RTC_VL_CLR		_IO(RTC_MAGIC, 0x14)
-#define RTC_MAX_IOCTL 0x14
-
-#endif /* __RTC_H__ */

arch/cris/kernel/time.c

@@ -21,7 +21,6 @@
  *
  */
 
-#include <asm/rtc.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/param.h>
@@ -32,7 +31,8 @@
 #include <linux/profile.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
 
-int have_rtc;  /* used to remember if we have an RTC or not */;
+
+#define D(x)
 
 #define TICK_SIZE tick
 
@@ -50,78 +50,16 @@ u32 arch_gettimeoffset(void)
 }
 #endif
 
-/*
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
- */
-
 int set_rtc_mmss(unsigned long nowtime)
 {
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-
-	printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime);
-
-	if(!have_rtc)
+	D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
 	return 0;
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		real_seconds = bin2bcd(real_seconds);
-		real_minutes = bin2bcd(real_minutes);
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	return retval;
 }
 
 /* grab the time from the RTC chip */
-
-unsigned long
-get_cmos_time(void)
+unsigned long get_cmos_time(void)
 {
-	unsigned int year, mon, day, hour, min, sec;
-	if(!have_rtc)
 	return 0;
-
-	sec = CMOS_READ(RTC_SECONDS);
-	min = CMOS_READ(RTC_MINUTES);
-	hour = CMOS_READ(RTC_HOURS);
-	day = CMOS_READ(RTC_DAY_OF_MONTH);
-	mon = CMOS_READ(RTC_MONTH);
-	year = CMOS_READ(RTC_YEAR);
-
-	sec = bcd2bin(sec);
-	min = bcd2bin(min);
-	hour = bcd2bin(hour);
-	day = bcd2bin(day);
-	mon = bcd2bin(mon);
-	year = bcd2bin(year);
-
-	if ((year += 1900) < 1970)
-		year += 100;
-
-	return mktime(year, mon, day, hour, min, sec);
 }
 
 
@@ -132,7 +70,7 @@ int update_persistent_clock(struct timespec now)
 
 void read_persistent_clock(struct timespec *ts)
 {
-	ts->tv_sec = get_cmos_time();
+	ts->tv_sec = 0;
 	ts->tv_nsec = 0;
 }
 

arch/cris/kernel/vmlinux.lds.S

@@ -52,6 +52,7 @@ SECTIONS
 
 	EXCEPTION_TABLE(4)
 
+	_sdata = .;
 	RODATA
 
 	. = ALIGN (4);

arch/cris/mm/fault.c

@@ -58,6 +58,8 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	struct vm_area_struct * vma;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+				((writeaccess & 1) ? FAULT_FLAG_WRITE : 0);
 
 	D(printk(KERN_DEBUG
 		 "Page fault for %lX on %X at %lX, prot %d write %d\n",
@@ -115,6 +117,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	if (in_atomic() || !mm)
 		goto no_context;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -163,7 +166,11 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	 * the fault.
 	 */
 
-	fault = handle_mm_fault(mm, vma, address, (writeaccess & 1) ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -171,10 +178,24 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 			goto do_sigbus;
 		BUG();
 	}
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
 		if (fault & VM_FAULT_MAJOR)
 			tsk->maj_flt++;
 		else
 			tsk->min_flt++;
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
+	}
 
 	up_read(&mm->mmap_sem);
 	return;

drivers/net/cris/eth_v10.c

@@ -1131,7 +1131,6 @@ static irqreturn_t
 e100rxtx_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
-	struct net_local *np = netdev_priv(dev);
 	unsigned long irqbits;
 
 	/*