drm/omap: HDMI: change enable/disable to avoid sync-losts

We occasionally see DISPC sync-lost errors when enabling and disabling
HDMI. Sometimes we get only a few, which get handled (ignored) by the
driver, but sometimes there's a flood of the errors which doesn't seem
to stop.

The HW team has root caused this to the order in which HDMI and DISPC
are enabled/disabled. Currently we enable HDMI first, and then DISPC,
and vice versa when disabling. HW team's suggestion is to do it the
other way around.

This patch changes the order, but this has two side effects as the pixel
clock is produced by HDMI, and the clock is not running when we
enable/disable DISPC:

* When enabling DISPC first, we don't get vertical sync events
* When disabling DISPC last, we don't get FRAMEDONE event

At the moment we use both of those to verify that DISPC has been
enabled/disabled properly. Thus this patch also needs to change the
omapdrm and omapdss which handle the DISPC side.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drivers/gpu/drm/omapdrm/dss/hdmi4.c

@@ -214,22 +214,22 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
 	/* tv size */
 	dss_mgr_set_timings(mgr, p);
 
-	r = hdmi_wp_video_start(&hdmi.wp);
-	if (r)
-		goto err_vid_enable;
-
 	r = dss_mgr_enable(mgr);
 	if (r)
 		goto err_mgr_enable;
 
+	r = hdmi_wp_video_start(&hdmi.wp);
+	if (r)
+		goto err_vid_enable;
+
 	hdmi_wp_set_irqenable(wp,
 		HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
 
 	return 0;
 
-err_mgr_enable:
-	hdmi_wp_video_stop(&hdmi.wp);
 err_vid_enable:
+	dss_mgr_disable(mgr);
+err_mgr_enable:
 	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
 err_phy_pwr:
 err_phy_cfg:
@@ -246,10 +246,10 @@ static void hdmi_power_off_full(struct omap_dss_device *dssdev)
 
 	hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
 
-	dss_mgr_disable(mgr);
-
 	hdmi_wp_video_stop(&hdmi.wp);
 
+	dss_mgr_disable(mgr);
+
 	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
 
 	dss_pll_disable(&hdmi.pll.pll);

drivers/gpu/drm/omapdrm/dss/hdmi5.c

@@ -231,22 +231,22 @@ static int hdmi_power_on_full(struct omap_dss_device *dssdev)
 	/* tv size */
 	dss_mgr_set_timings(mgr, p);
 
-	r = hdmi_wp_video_start(&hdmi.wp);
-	if (r)
-		goto err_vid_enable;
-
 	r = dss_mgr_enable(mgr);
 	if (r)
 		goto err_mgr_enable;
 
+	r = hdmi_wp_video_start(&hdmi.wp);
+	if (r)
+		goto err_vid_enable;
+
 	hdmi_wp_set_irqenable(&hdmi.wp,
 			HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
 
 	return 0;
 
-err_mgr_enable:
-	hdmi_wp_video_stop(&hdmi.wp);
 err_vid_enable:
+	dss_mgr_disable(mgr);
+err_mgr_enable:
 	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
 err_phy_pwr:
 err_phy_cfg:
@@ -263,10 +263,10 @@ static void hdmi_power_off_full(struct omap_dss_device *dssdev)
 
 	hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
 
-	dss_mgr_disable(mgr);
-
 	hdmi_wp_video_stop(&hdmi.wp);
 
+	dss_mgr_disable(mgr);
+
 	hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
 
 	dss_pll_disable(&hdmi.pll.pll);

drivers/gpu/drm/omapdrm/omap_crtc.c

@@ -138,6 +138,11 @@ static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
 	u32 framedone_irq, vsync_irq;
 	int ret;
 
+	if (omap_crtc->mgr->output->output_type == OMAP_DISPLAY_TYPE_HDMI) {
+		dispc_mgr_enable(channel, enable);
+		return;
+	}
+
 	if (dispc_mgr_is_enabled(channel) == enable)
 		return;