linux/dim: Move implementation to .c files

Moved all logic from dim.h and net_dim.h to dim.c and net_dim.c.
This is both more structurally appealing and would allow to only
expose externally used functions.
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

MAINTAINERS

@@ -5588,8 +5588,8 @@ F:	include/linux/dynamic_debug.h
 DYNAMIC INTERRUPT MODERATION
 M:	Tal Gilboa <talgi@mellanox.com>
 S:	Maintained
-F:	include/linux/net_dim.h
 F:	include/linux/dim.h
+F:	lib/dim/
 
 DZ DECSTATION DZ11 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>

drivers/net/ethernet/broadcom/Kconfig

@@ -8,6 +8,7 @@ config NET_VENDOR_BROADCOM
 	default y
 	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
 		   SIBYTE_SB1xxx_SOC
+	select DIMLIB
 	---help---
 	  If you have a network (Ethernet) chipset belonging to this class,
 	  say Y.

drivers/net/ethernet/broadcom/bcmsysport.h

@@ -14,7 +14,7 @@
 #include <linux/bitmap.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* Receive/transmit descriptor format */
 #define DESC_ADDR_HI_STATUS_LEN	0x00

drivers/net/ethernet/broadcom/bnxt/bnxt.h

@@ -23,7 +23,7 @@
 #include <net/devlink.h>
 #include <net/dst_metadata.h>
 #include <net/xdp.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 struct tx_bd {
 	__le32 tx_bd_len_flags_type;

drivers/net/ethernet/broadcom/bnxt/bnxt_debugfs.c

@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include "bnxt_hsi.h"
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include "bnxt.h"
 #include "bnxt_debugfs.h"
 

drivers/net/ethernet/broadcom/bnxt/bnxt_dim.c

@@ -7,7 +7,7 @@
  * the Free Software Foundation.
  */
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include "bnxt_hsi.h"
 #include "bnxt.h"
 

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -16,7 +16,7 @@
 #include <linux/mii.h>
 #include <linux/if_vlan.h>
 #include <linux/phy.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* total number of Buffer Descriptors, same for Rx/Tx */
 #define TOTAL_DESC				256

drivers/net/ethernet/mellanox/mlx5/core/Kconfig

@@ -34,6 +34,7 @@ config MLX5_CORE_EN
 	depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE
 	depends on IPV6=y || IPV6=n || MLX5_CORE=m
 	select PAGE_POOL
+	select DIMLIB
 	default n
 	---help---
 	  Ethernet support in Mellanox Technologies ConnectX-4 NIC.

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -48,7 +48,7 @@
 #include <linux/rhashtable.h>
 #include <net/switchdev.h>
 #include <net/xdp.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include <linux/bits.h>
 #include "wq.h"
 #include "mlx5_core.h"

drivers/net/ethernet/mellanox/mlx5/core/en_dim.c

@@ -30,7 +30,7 @@
  * SOFTWARE.
  */
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include "en.h"
 
 static void

include/linux/dim.h

@@ -6,20 +6,49 @@
 
 #include <linux/module.h>
 
+/**
+ * Number of events between DIM iterations.
+ * Causes a moderation of the algorithm run.
+ */
 #define DIM_NEVENTS 64
 
-/* more than 10% difference */
+/**
+ * Is a difference between values justifies taking an action.
+ * We consider 10% difference as significant.
+ */
 #define IS_SIGNIFICANT_DIFF(val, ref) \
 	(((100UL * abs((val) - (ref))) / (ref)) > 10)
+
+/**
+ * Calculate the gap between two values.
+ * Take wrap-around and variable size into consideration.
+ */
 #define BIT_GAP(bits, end, start) ((((end) - (start)) + BIT_ULL(bits)) \
-& (BIT_ULL(bits) - 1))
+		& (BIT_ULL(bits) - 1))
 
+/**
+ * Structure for CQ moderation values.
+ * Used for communications between DIM and its consumer.
+ *
+ * @usec: CQ timer suggestion (by DIM)
+ * @pkts: CQ packet counter suggestion (by DIM)
+ * @cq_period_mode: CQ priod count mode (from CQE/EQE)
+ */
 struct dim_cq_moder {
 	u16 usec;
 	u16 pkts;
 	u8 cq_period_mode;
 };
 
+/**
+ * Structure for DIM sample data.
+ * Used for communications between DIM and its consumer.
+ *
+ * @time: Sample timestamp
+ * @pkt_ctr: Number of packets
+ * @byte_ctr: Number of bytes
+ * @event_ctr: Number of events
+ */
 struct dim_sample {
 	ktime_t time;
 	u32 pkt_ctr;
@@ -27,13 +56,36 @@ struct dim_sample {
 	u16 event_ctr;
 };
 
+/**
+ * Structure for DIM stats.
+ * Used for holding current measured rates.
+ *
+ * @ppms: Packets per msec
+ * @bpms: Bytes per msec
+ * @epms: Events per msec
+ */
 struct dim_stats {
-	int ppms; /* packets per msec */
-	int bpms; /* bytes per msec */
-	int epms; /* events per msec */
+	int ppms;
+	int bpms;
+	int epms;
 };
 
-struct dim { /* Dynamic Interrupt Moderation */
+/**
+ * Main structure for dynamic interrupt moderation (DIM).
+ * Used for holding all information about a specific DIM instance.
+ *
+ * @state: Algorithm state (see below)
+ * @prev_stats: Measured rates from previous iteration (for comparison)
+ * @start_sample: Sampled data at start of current iteration
+ * @work: Work to perform on action required
+ * @profile_ix: Current moderation profile
+ * @mode: CQ period count mode
+ * @tune_state: Algorithm tuning state (see below)
+ * @steps_right: Number of steps taken towards higher moderation
+ * @steps_left: Number of steps taken towards lower moderation
+ * @tired: Parking depth counter
+ */
+struct dim {
 	u8 state;
 	struct dim_stats prev_stats;
 	struct dim_sample start_sample;
@@ -46,18 +98,49 @@ struct dim { /* Dynamic Interrupt Moderation */
 	u8 tired;
 };
 
+/**
+ * enum dim_cq_period_mode
+ *
+ * These are the modes for CQ period count.
+ *
+ * @DIM_CQ_PERIOD_MODE_START_FROM_EQE: Start counting from EQE
+ * @DIM_CQ_PERIOD_MODE_START_FROM_CQE: Start counting from CQE (implies timer reset)
+ * @DIM_CQ_PERIOD_NUM_MODES: Number of modes
+ */
 enum {
 	DIM_CQ_PERIOD_MODE_START_FROM_EQE = 0x0,
 	DIM_CQ_PERIOD_MODE_START_FROM_CQE = 0x1,
 	DIM_CQ_PERIOD_NUM_MODES
 };
 
+/**
+ * enum dim_state
+ *
+ * These are the DIM algorithm states.
+ * These will determine if the algorithm is in a valid state to start an iteration.
+ *
+ * @DIM_START_MEASURE: This is the first iteration (also after applying a new profile)
+ * @DIM_MEASURE_IN_PROGRESS: Algorithm is already in progress - check if
+ * need to perform an action
+ * @DIM_APPLY_NEW_PROFILE: DIM consumer is currently applying a profile - no need to measure
+ */
 enum {
 	DIM_START_MEASURE,
 	DIM_MEASURE_IN_PROGRESS,
 	DIM_APPLY_NEW_PROFILE,
 };
 
+/**
+ * enum dim_tune_state
+ *
+ * These are the DIM algorithm tune states.
+ * These will determine which action the algorithm should perform.
+ *
+ * @DIM_PARKING_ON_TOP: Algorithm found a local top point - exit on significant difference
+ * @DIM_PARKING_TIRED: Algorithm found a deep top point - don't exit if tired > 0
+ * @DIM_GOING_RIGHT: Algorithm is currently trying higher moderation levels
+ * @DIM_GOING_LEFT: Algorithm is currently trying lower moderation levels
+ */
 enum {
 	DIM_PARKING_ON_TOP,
 	DIM_PARKING_TIRED,
@@ -65,63 +148,95 @@ enum {
 	DIM_GOING_LEFT,
 };
 
+/**
+ * enum dim_stats_state
+ *
+ * These are the DIM algorithm statistics states.
+ * These will determine the verdict of current iteration.
+ *
+ * @DIM_STATS_WORSE: Current iteration shows worse performance than before
+ * @DIM_STATS_WORSE: Current iteration shows same performance than before
+ * @DIM_STATS_WORSE: Current iteration shows better performance than before
+ */
 enum {
 	DIM_STATS_WORSE,
 	DIM_STATS_SAME,
 	DIM_STATS_BETTER,
 };
 
+/**
+ * enum dim_step_result
+ *
+ * These are the DIM algorithm step results.
+ * These describe the result of a step.
+ *
+ * @DIM_STEPPED: Performed a regular step
+ * @DIM_TOO_TIRED: Same kind of step was done multiple times - should go to
+ * tired parking
+ * @DIM_ON_EDGE: Stepped to the most left/right profile
+ */
 enum {
 	DIM_STEPPED,
 	DIM_TOO_TIRED,
 	DIM_ON_EDGE,
 };
 
-static inline bool dim_on_top(struct dim *dim)
-{
-	switch (dim->tune_state) {
-	case DIM_PARKING_ON_TOP:
-	case DIM_PARKING_TIRED:
-		return true;
-	case DIM_GOING_RIGHT:
-		return (dim->steps_left > 1) && (dim->steps_right == 1);
-	default: /* DIM_GOING_LEFT */
-		return (dim->steps_right > 1) && (dim->steps_left == 1);
-	}
-}
+/**
+ *	dim_on_top - check if current state is a good place to stop (top location)
+ *	@dim: DIM context
+ *
+ * Check if current profile is a good place to park at.
+ * This will result in reducing the DIM checks frequency as we assume we
+ * shouldn't probably change profiles, unless traffic pattern wasn't changed.
+ */
+bool dim_on_top(struct dim *dim);
 
-static inline void dim_turn(struct dim *dim)
-{
-	switch (dim->tune_state) {
-	case DIM_PARKING_ON_TOP:
-	case DIM_PARKING_TIRED:
-		break;
-	case DIM_GOING_RIGHT:
-		dim->tune_state = DIM_GOING_LEFT;
-		dim->steps_left = 0;
-		break;
-	case DIM_GOING_LEFT:
-		dim->tune_state = DIM_GOING_RIGHT;
-		dim->steps_right = 0;
-		break;
-	}
-}
+/**
+ *	dim_turn - change profile alterning direction
+ *	@dim: DIM context
+ *
+ * Go left if we were going right and vice-versa.
+ * Do nothing if currently parking.
+ */
+void dim_turn(struct dim *dim);
 
-static inline void dim_park_on_top(struct dim *dim)
-{
-	dim->steps_right  = 0;
-	dim->steps_left   = 0;
-	dim->tired        = 0;
-	dim->tune_state   = DIM_PARKING_ON_TOP;
-}
+/**
+ *	dim_park_on_top - enter a parking state on a top location
+ *	@dim: DIM context
+ *
+ * Enter parking state.
+ * Clear all movement history.
+ */
+void dim_park_on_top(struct dim *dim);
 
-static inline void dim_park_tired(struct dim *dim)
-{
-	dim->steps_right  = 0;
-	dim->steps_left   = 0;
-	dim->tune_state   = DIM_PARKING_TIRED;
-}
+/**
+ *	dim_park_tired - enter a tired parking state
+ *	@dim: DIM context
+ *
+ * Enter parking state.
+ * Clear all movement history and cause DIM checks frequency to reduce.
+ */
+void dim_park_tired(struct dim *dim);
+
+/**
+ *	dim_calc_stats - calculate the difference between two samples
+ *	@start: start sample
+ *	@end: end sample
+ *	@curr_stats: delta between samples
+ *
+ * Calculate the delta between two samples (in data rates).
+ * Takes into consideration counter wrap-around.
+ */
+void dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
+		    struct dim_stats *curr_stats);
 
+/**
+ *	dim_update_sample - set a sample's fields with give values
+ *	@event_ctr: number of events to set
+ *	@packets: number of packets to set
+ *	@bytes: number of bytes to set
+ *	@s: DIM sample
+ */
 static inline void
 dim_update_sample(u16 event_ctr, u64 packets, u64 bytes, struct dim_sample *s)
 {
@@ -131,23 +246,99 @@ dim_update_sample(u16 event_ctr, u64 packets, u64 bytes, struct dim_sample *s)
 	s->event_ctr = event_ctr;
 }
 
-static inline void
-dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
-	       struct dim_stats *curr_stats)
-{
-	/* u32 holds up to 71 minutes, should be enough */
-	u32 delta_us = ktime_us_delta(end->time, start->time);
-	u32 npkts = BIT_GAP(BITS_PER_TYPE(u32), end->pkt_ctr, start->pkt_ctr);
-	u32 nbytes = BIT_GAP(BITS_PER_TYPE(u32), end->byte_ctr,
-			     start->byte_ctr);
-
-	if (!delta_us)
-		return;
-
-	curr_stats->ppms = DIV_ROUND_UP(npkts * USEC_PER_MSEC, delta_us);
-	curr_stats->bpms = DIV_ROUND_UP(nbytes * USEC_PER_MSEC, delta_us);
-	curr_stats->epms = DIV_ROUND_UP(DIM_NEVENTS * USEC_PER_MSEC,
-					delta_us);
+/* Net DIM */
+
+/*
+ * Net DIM profiles:
+ *        There are different set of profiles for each CQ period mode.
+ *        There are different set of profiles for RX/TX CQs.
+ *        Each profile size must be of NET_DIM_PARAMS_NUM_PROFILES
+ */
+#define NET_DIM_PARAMS_NUM_PROFILES 5
+#define NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE 256
+#define NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE 128
+#define NET_DIM_DEF_PROFILE_CQE 1
+#define NET_DIM_DEF_PROFILE_EQE 1
+
+#define NET_DIM_RX_EQE_PROFILES { \
+	{1,   NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+	{8,   NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+	{64,  NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+	{128, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+	{256, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
 }
 
+#define NET_DIM_RX_CQE_PROFILES { \
+	{2,  256},             \
+	{8,  128},             \
+	{16, 64},              \
+	{32, 64},              \
+	{64, 64}               \
+}
+
+#define NET_DIM_TX_EQE_PROFILES { \
+	{1,   NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
+	{8,   NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
+	{32,  NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
+	{64,  NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
+	{128, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}   \
+}
+
+#define NET_DIM_TX_CQE_PROFILES { \
+	{5,  128},  \
+	{8,  64},  \
+	{16, 32},  \
+	{32, 32},  \
+	{64, 32}   \
+}
+
+static const struct dim_cq_moder
+rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
+	NET_DIM_RX_EQE_PROFILES,
+	NET_DIM_RX_CQE_PROFILES,
+};
+
+static const struct dim_cq_moder
+tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
+	NET_DIM_TX_EQE_PROFILES,
+	NET_DIM_TX_CQE_PROFILES,
+};
+
+/**
+ *	net_dim_get_rx_moderation - provide a CQ moderation object for the given RX profile
+ *	@cq_period_mode: CQ period mode
+ *	@ix: Profile index
+ */
+struct dim_cq_moder net_dim_get_rx_moderation(u8 cq_period_mode, int ix);
+
+/**
+ *	net_dim_get_def_rx_moderation - provide the default RX moderation
+ *	@cq_period_mode: CQ period mode
+ */
+struct dim_cq_moder net_dim_get_def_rx_moderation(u8 cq_period_mode);
+
+/**
+ *	net_dim_get_tx_moderation - provide a CQ moderation object for the given TX profile
+ *	@cq_period_mode: CQ period mode
+ *	@ix: Profile index
+ */
+struct dim_cq_moder net_dim_get_tx_moderation(u8 cq_period_mode, int ix);
+
+/**
+ *	net_dim_get_def_tx_moderation - provide the default TX moderation
+ *	@cq_period_mode: CQ period mode
+ */
+struct dim_cq_moder net_dim_get_def_tx_moderation(u8 cq_period_mode);
+
+/**
+ *	net_dim - main DIM algorithm entry point
+ *	@dim: DIM instance information
+ *	@end_sample: Current data measurement
+ *
+ * Called by the consumer.
+ * This is the main logic of the algorithm, where data is processed in order to decide on next
+ * required action.
+ */
+void net_dim(struct dim *dim, struct dim_sample end_sample);
+
 #endif /* DIM_H */

lib/Kconfig

@@ -562,6 +562,14 @@ config SIGNATURE
 	  Digital signature verification. Currently only RSA is supported.
 	  Implementation is done using GnuPG MPI library
 
+config DIMLIB
+	bool "DIM library"
+	default y
+	help
+	  Dynamic Interrupt Moderation library.
+	  Implements an algorithm for dynamically change CQ modertion values
+	  according to run time performance.
+
 #
 # libfdt files, only selected if needed.
 #

lib/Makefile

@@ -202,6 +202,7 @@ obj-$(CONFIG_GLOB) += glob.o
 obj-$(CONFIG_GLOB_SELFTEST) += globtest.o
 
 obj-$(CONFIG_MPILIB) += mpi/
+obj-$(CONFIG_DIMLIB) += dim/
 obj-$(CONFIG_SIGNATURE) += digsig.o
 
 lib-$(CONFIG_CLZ_TAB) += clz_tab.o

lib/dim/Makefile

+#
+# DIM Dynamic Interrupt Moderation library
+#
+
+obj-$(CONFIG_DIMLIB) = net_dim.o
+
+net_dim-y = \
+	dim.o		\
+	net_dim.o

lib/dim/dim.c

+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2019, Mellanox Technologies inc.  All rights reserved.
+ */
+
+#include <linux/dim.h>
+
+bool dim_on_top(struct dim *dim)
+{
+	switch (dim->tune_state) {
+	case DIM_PARKING_ON_TOP:
+	case DIM_PARKING_TIRED:
+		return true;
+	case DIM_GOING_RIGHT:
+		return (dim->steps_left > 1) && (dim->steps_right == 1);
+	default: /* DIM_GOING_LEFT */
+		return (dim->steps_right > 1) && (dim->steps_left == 1);
+	}
+}
+EXPORT_SYMBOL(dim_on_top);
+
+void dim_turn(struct dim *dim)
+{
+	switch (dim->tune_state) {
+	case DIM_PARKING_ON_TOP:
+	case DIM_PARKING_TIRED:
+		break;
+	case DIM_GOING_RIGHT:
+		dim->tune_state = DIM_GOING_LEFT;
+		dim->steps_left = 0;
+		break;
+	case DIM_GOING_LEFT:
+		dim->tune_state = DIM_GOING_RIGHT;
+		dim->steps_right = 0;
+		break;
+	}
+}
+EXPORT_SYMBOL(dim_turn);
+
+void dim_park_on_top(struct dim *dim)
+{
+	dim->steps_right  = 0;
+	dim->steps_left   = 0;
+	dim->tired        = 0;
+	dim->tune_state   = DIM_PARKING_ON_TOP;
+}
+EXPORT_SYMBOL(dim_park_on_top);
+
+void dim_park_tired(struct dim *dim)
+{
+	dim->steps_right  = 0;
+	dim->steps_left   = 0;
+	dim->tune_state   = DIM_PARKING_TIRED;
+}
+EXPORT_SYMBOL(dim_park_tired);
+
+void dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
+		    struct dim_stats *curr_stats)
+{
+	/* u32 holds up to 71 minutes, should be enough */
+	u32 delta_us = ktime_us_delta(end->time, start->time);
+	u32 npkts = BIT_GAP(BITS_PER_TYPE(u32), end->pkt_ctr, start->pkt_ctr);
+	u32 nbytes = BIT_GAP(BITS_PER_TYPE(u32), end->byte_ctr,
+			     start->byte_ctr);
+
+	if (!delta_us)
+		return;
+
+	curr_stats->ppms = DIV_ROUND_UP(npkts * USEC_PER_MSEC, delta_us);
+	curr_stats->bpms = DIV_ROUND_UP(nbytes * USEC_PER_MSEC, delta_us);
+	curr_stats->epms = DIV_ROUND_UP(DIM_NEVENTS * USEC_PER_MSEC,
+					delta_us);
+}
+EXPORT_SYMBOL(dim_calc_stats);

include/linux/net_dim.h → lib/dim/net_dim.c

+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
 /*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- * Copyright (c) 2017-2018, Broadcom Limited. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
+ * Copyright (c) 2018, Mellanox Technologies inc.  All rights reserved.
  */
 
-#ifndef NET_DIM_H
-#define NET_DIM_H
-
-#include <linux/module.h>
 #include <linux/dim.h>
 
-#define NET_DIM_PARAMS_NUM_PROFILES 5
-/* Netdev dynamic interrupt moderation profiles */
-#define NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE 256
-#define NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE 128
-#define NET_DIM_DEF_PROFILE_CQE 1
-#define NET_DIM_DEF_PROFILE_EQE 1
-
-/* All profiles sizes must be NET_PARAMS_DIM_NUM_PROFILES */
-#define NET_DIM_RX_EQE_PROFILES { \
-	{1,   NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
-	{8,   NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
-	{64,  NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
-	{128, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
-	{256, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
-}
-
-#define NET_DIM_RX_CQE_PROFILES { \
-	{2,  256},             \
-	{8,  128},             \
-	{16, 64},              \
-	{32, 64},              \
-	{64, 64}               \
-}
-
-#define NET_DIM_TX_EQE_PROFILES { \
-	{1,   NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
-	{8,   NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
-	{32,  NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
-	{64,  NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE},  \
-	{128, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}   \
-}
-
-#define NET_DIM_TX_CQE_PROFILES { \
-	{5,  128},  \
-	{8,  64},  \
-	{16, 32},  \
-	{32, 32},  \
-	{64, 32}   \
-}
-
-static const struct dim_cq_moder
-rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
-	NET_DIM_RX_EQE_PROFILES,
-	NET_DIM_RX_CQE_PROFILES,
-};
-
-static const struct dim_cq_moder
-tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
-	NET_DIM_TX_EQE_PROFILES,
-	NET_DIM_TX_CQE_PROFILES,
-};
-
-static inline struct dim_cq_moder
+struct dim_cq_moder
 net_dim_get_rx_moderation(u8 cq_period_mode, int ix)
 {
 	struct dim_cq_moder cq_moder = rx_profile[cq_period_mode][ix];
@@ -97,8 +13,9 @@ net_dim_get_rx_moderation(u8 cq_period_mode, int ix)
 	cq_moder.cq_period_mode = cq_period_mode;
 	return cq_moder;
 }
+EXPORT_SYMBOL(net_dim_get_rx_moderation);
 
-static inline struct dim_cq_moder
+struct dim_cq_moder
 net_dim_get_def_rx_moderation(u8 cq_period_mode)
 {
 	u8 profile_ix = cq_period_mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE ?
@@ -106,8 +23,9 @@ net_dim_get_def_rx_moderation(u8 cq_period_mode)
 
 	return net_dim_get_rx_moderation(cq_period_mode, profile_ix);
 }
+EXPORT_SYMBOL(net_dim_get_def_rx_moderation);
 
-static inline struct dim_cq_moder
+struct dim_cq_moder
 net_dim_get_tx_moderation(u8 cq_period_mode, int ix)
 {
 	struct dim_cq_moder cq_moder = tx_profile[cq_period_mode][ix];
@@ -115,8 +33,9 @@ net_dim_get_tx_moderation(u8 cq_period_mode, int ix)
 	cq_moder.cq_period_mode = cq_period_mode;
 	return cq_moder;
 }
+EXPORT_SYMBOL(net_dim_get_tx_moderation);
 
-static inline struct dim_cq_moder
+struct dim_cq_moder
 net_dim_get_def_tx_moderation(u8 cq_period_mode)
 {
 	u8 profile_ix = cq_period_mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE ?
@@ -124,8 +43,9 @@ net_dim_get_def_tx_moderation(u8 cq_period_mode)
 
 	return net_dim_get_tx_moderation(cq_period_mode, profile_ix);
 }
+EXPORT_SYMBOL(net_dim_get_def_tx_moderation);
 
-static inline int net_dim_step(struct dim *dim)
+static int net_dim_step(struct dim *dim)
 {
 	if (dim->tired == (NET_DIM_PARAMS_NUM_PROFILES * 2))
 		return DIM_TOO_TIRED;
@@ -152,19 +72,17 @@ static inline int net_dim_step(struct dim *dim)
 	return DIM_STEPPED;
 }
 
-static inline void net_dim_exit_parking(struct dim *dim)
+static void net_dim_exit_parking(struct dim *dim)
 {
-	dim->tune_state = dim->profile_ix ? DIM_GOING_LEFT :
-					  DIM_GOING_RIGHT;
+	dim->tune_state = dim->profile_ix ? DIM_GOING_LEFT : DIM_GOING_RIGHT;
 	net_dim_step(dim);
 }
 
-static inline int net_dim_stats_compare(struct dim_stats *curr,
+static int net_dim_stats_compare(struct dim_stats *curr,
 				 struct dim_stats *prev)
 {
 	if (!prev->bpms)
-		return curr->bpms ? DIM_STATS_BETTER :
-				    DIM_STATS_SAME;
+		return curr->bpms ? DIM_STATS_BETTER : DIM_STATS_SAME;
 
 	if (IS_SIGNIFICANT_DIFF(curr->bpms, prev->bpms))
 		return (curr->bpms > prev->bpms) ? DIM_STATS_BETTER :
@@ -188,8 +106,7 @@ static inline int net_dim_stats_compare(struct dim_stats *curr,
 	return DIM_STATS_SAME;
 }
 
-static inline bool net_dim_decision(struct dim_stats *curr_stats,
-				    struct dim *dim)
+static bool net_dim_decision(struct dim_stats *curr_stats, struct dim *dim)
 {
 	int prev_state = dim->tune_state;
 	int prev_ix = dim->profile_ix;
@@ -198,7 +115,8 @@ static inline bool net_dim_decision(struct dim_stats *curr_stats,
 
 	switch (dim->tune_state) {
 	case DIM_PARKING_ON_TOP:
-		stats_res = net_dim_stats_compare(curr_stats, &dim->prev_stats);
+		stats_res = net_dim_stats_compare(curr_stats,
+						  &dim->prev_stats);
 		if (stats_res != DIM_STATS_SAME)
 			net_dim_exit_parking(dim);
 		break;
@@ -211,7 +129,8 @@ static inline bool net_dim_decision(struct dim_stats *curr_stats,
 
 	case DIM_GOING_RIGHT:
 	case DIM_GOING_LEFT:
-		stats_res = net_dim_stats_compare(curr_stats, &dim->prev_stats);
+		stats_res = net_dim_stats_compare(curr_stats,
+						  &dim->prev_stats);
 		if (stats_res != DIM_STATS_BETTER)
 			dim_turn(dim);
 
@@ -240,8 +159,7 @@ static inline bool net_dim_decision(struct dim_stats *curr_stats,
 	return dim->profile_ix != prev_ix;
 }
 
-static inline void net_dim(struct dim *dim,
-			   struct dim_sample end_sample)
+void net_dim(struct dim *dim, struct dim_sample end_sample)
 {
 	struct dim_stats curr_stats;
 	u16 nevents;
@@ -269,5 +187,4 @@ static inline void net_dim(struct dim *dim,
 		break;
 	}
 }
-
-#endif /* NET_DIM_H */
+EXPORT_SYMBOL(net_dim);