Commit 52c99bda authored by Steven Toth's avatar Steven Toth Committed by Mauro Carvalho Chehab

V4L/DVB (7862): Add mxl5505s driver for MaxiLinear 5505 chipsets

Initial check-in of the original driver to establish history.
Signed-off-by: default avatarChia-Ling Lu Developer <chialing@realtek.com.tw>
Signed-off-by: default avatarSteven Toth <stoth@hauppauge.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent e4671b6b
This source diff could not be displayed because it is too large. You can view the blob instead.
/*
* For the Realtek RTL chip RTL2831U
* Realtek Release Date: 2008-03-14, ver 080314
* Realtek version RTL2831 Linux driver version 080314
* ver 080314
*
* for linux kernel version 2.6.21.4 - 2.6.22-14
* support MXL5005s and MT2060 tuners (support tuner auto-detecting)
* support two IR types -- RC5 and NEC
*
* Known boards with Realtek RTL chip RTL2821U
* Freecom USB stick 14aa:0160 (version 4)
* Conceptronic CTVDIGRCU
*
* Copyright (c) 2008 Realtek
* Copyright (c) 2008 Jan Hoogenraad, Barnaby Shearer, Andy Hasper
* This code is placed under the terms of the GNU General Public License
*
* Released by Realtek under GPLv2.
* Thanks to Realtek for a lot of support we received !
*
* Revision: 080314 - original version
*/
#ifndef __TUNER_MXL5005S_H
#define __TUNER_MXL5005S_H
// The following context is source code provided by MaxLinear.
// MaxLinear source code - Common.h
//#pragma once
typedef unsigned char _u8; // At least 1 Byte
typedef unsigned short _u16; // At least 2 Bytes
typedef signed short _s16;
typedef unsigned long _u32; // At least 4 Bytes
typedef void * HANDLE; // Pointer to memory location
#define TUNER_REGS_NUM 104
#define INITCTRL_NUM 40
#ifdef _MXL_PRODUCTION
#define CHCTRL_NUM 39
#else
#define CHCTRL_NUM 36
#endif
#define MXLCTRL_NUM 189
#define MASTER_CONTROL_ADDR 9
// Enumeration of AGC Mode
typedef enum
{
MXL_DUAL_AGC = 0 ,
MXL_SINGLE_AGC
} AGC_Mode ;
//
// Enumeration of Master Control Register State
//
typedef enum
{
MC_LOAD_START = 1 ,
MC_POWER_DOWN ,
MC_SYNTH_RESET ,
MC_SEQ_OFF
} Master_Control_State ;
//
// Enumeration of MXL5005 Tuner Mode
//
typedef enum
{
MXL_ANALOG_MODE = 0 ,
MXL_DIGITAL_MODE
} Tuner_Mode ;
//
// Enumeration of MXL5005 Tuner IF Mode
//
typedef enum
{
MXL_ZERO_IF = 0 ,
MXL_LOW_IF
} Tuner_IF_Mode ;
//
// Enumeration of MXL5005 Tuner Clock Out Mode
//
typedef enum
{
MXL_CLOCK_OUT_DISABLE = 0 ,
MXL_CLOCK_OUT_ENABLE
} Tuner_Clock_Out ;
//
// Enumeration of MXL5005 Tuner Div Out Mode
//
typedef enum
{
MXL_DIV_OUT_1 = 0 ,
MXL_DIV_OUT_4
} Tuner_Div_Out ;
//
// Enumeration of MXL5005 Tuner Pull-up Cap Select Mode
//
typedef enum
{
MXL_CAP_SEL_DISABLE = 0 ,
MXL_CAP_SEL_ENABLE
} Tuner_Cap_Select ;
//
// Enumeration of MXL5005 Tuner RSSI Mode
//
typedef enum
{
MXL_RSSI_DISABLE = 0 ,
MXL_RSSI_ENABLE
} Tuner_RSSI ;
//
// Enumeration of MXL5005 Tuner Modulation Type
//
typedef enum
{
MXL_DEFAULT_MODULATION = 0 ,
MXL_DVBT,
MXL_ATSC,
MXL_QAM,
MXL_ANALOG_CABLE,
MXL_ANALOG_OTA
} Tuner_Modu_Type ;
//
// Enumeration of MXL5005 Tuner Tracking Filter Type
//
typedef enum
{
MXL_TF_DEFAULT = 0 ,
MXL_TF_OFF,
MXL_TF_C,
MXL_TF_C_H,
MXL_TF_D,
MXL_TF_D_L,
MXL_TF_E,
MXL_TF_F,
MXL_TF_E_2,
MXL_TF_E_NA,
MXL_TF_G
} Tuner_TF_Type ;
//
// MXL5005 Tuner Register Struct
//
typedef struct _TunerReg_struct
{
_u16 Reg_Num ; // Tuner Register Address
_u16 Reg_Val ; // Current sofware programmed value waiting to be writen
} TunerReg_struct ;
//
// MXL5005 Tuner Control Struct
//
typedef struct _TunerControl_struct {
_u16 Ctrl_Num ; // Control Number
_u16 size ; // Number of bits to represent Value
_u16 addr[25] ; // Array of Tuner Register Address for each bit position
_u16 bit[25] ; // Array of bit position in Register Address for each bit position
_u16 val[25] ; // Binary representation of Value
} TunerControl_struct ;
//
// MXL5005 Tuner Struct
//
typedef struct _Tuner_struct
{
_u8 Mode ; // 0: Analog Mode ; 1: Digital Mode
_u8 IF_Mode ; // for Analog Mode, 0: zero IF; 1: low IF
_u32 Chan_Bandwidth ; // filter channel bandwidth (6, 7, 8)
_u32 IF_OUT ; // Desired IF Out Frequency
_u16 IF_OUT_LOAD ; // IF Out Load Resistor (200/300 Ohms)
_u32 RF_IN ; // RF Input Frequency
_u32 Fxtal ; // XTAL Frequency
_u8 AGC_Mode ; // AGC Mode 0: Dual AGC; 1: Single AGC
_u16 TOP ; // Value: take over point
_u8 CLOCK_OUT ; // 0: turn off clock out; 1: turn on clock out
_u8 DIV_OUT ; // 4MHz or 16MHz
_u8 CAPSELECT ; // 0: disable On-Chip pulling cap; 1: enable
_u8 EN_RSSI ; // 0: disable RSSI; 1: enable RSSI
_u8 Mod_Type ; // Modulation Type;
// 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable
_u8 TF_Type ; // Tracking Filter Type
// 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H
// Calculated Settings
_u32 RF_LO ; // Synth RF LO Frequency
_u32 IF_LO ; // Synth IF LO Frequency
_u32 TG_LO ; // Synth TG_LO Frequency
// Pointers to ControlName Arrays
_u16 Init_Ctrl_Num ; // Number of INIT Control Names
TunerControl_struct Init_Ctrl[INITCTRL_NUM] ; // INIT Control Names Array Pointer
_u16 CH_Ctrl_Num ; // Number of CH Control Names
TunerControl_struct CH_Ctrl[CHCTRL_NUM] ; // CH Control Name Array Pointer
_u16 MXL_Ctrl_Num ; // Number of MXL Control Names
TunerControl_struct MXL_Ctrl[MXLCTRL_NUM] ; // MXL Control Name Array Pointer
// Pointer to Tuner Register Array
_u16 TunerRegs_Num ; // Number of Tuner Registers
TunerReg_struct TunerRegs[TUNER_REGS_NUM] ; // Tuner Register Array Pointer
} Tuner_struct ;
typedef enum
{
//
// Initialization Control Names
//
DN_IQTN_AMP_CUT = 1 , // 1
BB_MODE , // 2
BB_BUF , // 3
BB_BUF_OA , // 4
BB_ALPF_BANDSELECT , // 5
BB_IQSWAP , // 6
BB_DLPF_BANDSEL , // 7
RFSYN_CHP_GAIN , // 8
RFSYN_EN_CHP_HIGAIN , // 9
AGC_IF , // 10
AGC_RF , // 11
IF_DIVVAL , // 12
IF_VCO_BIAS , // 13
CHCAL_INT_MOD_IF , // 14
CHCAL_FRAC_MOD_IF , // 15
DRV_RES_SEL , // 16
I_DRIVER , // 17
EN_AAF , // 18
EN_3P , // 19
EN_AUX_3P , // 20
SEL_AAF_BAND , // 21
SEQ_ENCLK16_CLK_OUT , // 22
SEQ_SEL4_16B , // 23
XTAL_CAPSELECT , // 24
IF_SEL_DBL , // 25
RFSYN_R_DIV , // 26
SEQ_EXTSYNTHCALIF , // 27
SEQ_EXTDCCAL , // 28
AGC_EN_RSSI , // 29
RFA_ENCLKRFAGC , // 30
RFA_RSSI_REFH , // 31
RFA_RSSI_REF , // 32
RFA_RSSI_REFL , // 33
RFA_FLR , // 34
RFA_CEIL , // 35
SEQ_EXTIQFSMPULSE , // 36
OVERRIDE_1 , // 37
BB_INITSTATE_DLPF_TUNE, // 38
TG_R_DIV, // 39
EN_CHP_LIN_B , // 40
//
// Channel Change Control Names
//
DN_POLY = 51 , // 51
DN_RFGAIN , // 52
DN_CAP_RFLPF , // 53
DN_EN_VHFUHFBAR , // 54
DN_GAIN_ADJUST , // 55
DN_IQTNBUF_AMP , // 56
DN_IQTNGNBFBIAS_BST , // 57
RFSYN_EN_OUTMUX , // 58
RFSYN_SEL_VCO_OUT , // 59
RFSYN_SEL_VCO_HI , // 60
RFSYN_SEL_DIVM , // 61
RFSYN_RF_DIV_BIAS , // 62
DN_SEL_FREQ , // 63
RFSYN_VCO_BIAS , // 64
CHCAL_INT_MOD_RF , // 65
CHCAL_FRAC_MOD_RF , // 66
RFSYN_LPF_R , // 67
CHCAL_EN_INT_RF , // 68
TG_LO_DIVVAL , // 69
TG_LO_SELVAL , // 70
TG_DIV_VAL , // 71
TG_VCO_BIAS , // 72
SEQ_EXTPOWERUP , // 73
OVERRIDE_2 , // 74
OVERRIDE_3 , // 75
OVERRIDE_4 , // 76
SEQ_FSM_PULSE , // 77
GPIO_4B, // 78
GPIO_3B, // 79
GPIO_4, // 80
GPIO_3, // 81
GPIO_1B, // 82
DAC_A_ENABLE , // 83
DAC_B_ENABLE , // 84
DAC_DIN_A , // 85
DAC_DIN_B , // 86
#ifdef _MXL_PRODUCTION
RFSYN_EN_DIV, // 87
RFSYN_DIVM, // 88
DN_BYPASS_AGC_I2C // 89
#endif
} MXL5005_ControlName ;
// MaxLinear source code - MXL5005_c.h
// MXL5005.h : main header file for the MXL5005 DLL
//
//#pragma once
//#include "Common.h"
#ifdef _MXL_INTERNAL
#include "Common_MXL.h"
#endif
void InitTunerControls( Tuner_struct *Tuner) ;
_u16 MXL_BlockInit( Tuner_struct *Tuner ) ;
_u16 MXL5005_RegisterInit (Tuner_struct * Tuner) ;
_u16 MXL5005_ControlInit (Tuner_struct *Tuner) ;
#ifdef _MXL_INTERNAL
_u16 MXL5005_MXLControlInit(Tuner_struct *Tuner) ;
#endif
_u16 MXL5005_TunerConfig(Tuner_struct *Tuner,
_u8 Mode, // 0: Analog Mode ; 1: Digital Mode
_u8 IF_mode, // for Analog Mode, 0: zero IF; 1: low IF
_u32 Bandwidth, // filter channel bandwidth (6, 7, 8)
_u32 IF_out, // Desired IF Out Frequency
_u32 Fxtal, // XTAL Frequency
_u8 AGC_Mode, // AGC Mode - Dual AGC: 0, Single AGC: 1
_u16 TOP, // 0: Dual AGC; Value: take over point
_u16 IF_OUT_LOAD,// IF Out Load Resistor (200 / 300 Ohms)
_u8 CLOCK_OUT, // 0: turn off clock out; 1: turn on clock out
_u8 DIV_OUT, // 4MHz or 16MHz
_u8 CAPSELECT, // 0: disable On-Chip pulling cap; 1: enable
_u8 EN_RSSI, // 0: disable RSSI; 1: enable RSSI
_u8 Mod_Type, // Modulation Type;
// 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable
_u8 TF_Type // Tracking Filter Type
// 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H
) ;
void MXL_SynthIFLO_Calc(Tuner_struct *Tuner) ;
void MXL_SynthRFTGLO_Calc(Tuner_struct *Tuner) ;
_u16 MXL_RegWrite(Tuner_struct *Tuner, _u8 RegNum, _u8 RegVal) ;
_u16 MXL_RegRead(Tuner_struct *Tuner, _u8 RegNum, _u8 *RegVal) ;
_u16 MXL_ControlWrite(Tuner_struct *Tuner, _u16 ControlNum, _u32 value) ;
_u16 MXL_ControlWrite_Group(Tuner_struct *Tuner, _u16 ControlNum, _u32 value, _u16 controlGroup) ;
_u16 MXL_ControlRead(Tuner_struct *Tuner, _u16 ControlNum, _u32 * value) ;
_u16 MXL_ControlRegRead(Tuner_struct *Tuner, _u16 ControlNum, _u8 *RegNum, int * count) ;
void MXL_RegWriteBit(Tuner_struct *Tuner, _u8 address, _u8 bit, _u8 bitVal);
_u16 MXL_IFSynthInit( Tuner_struct * Tuner ) ;
_u16 MXL_TuneRF(Tuner_struct *Tuner, _u32 RF_Freq) ;
_u16 MXL_OverwriteICDefault( Tuner_struct *Tuner) ;
_u16 MXL_SetGPIO(Tuner_struct *Tuner, _u8 GPIO_Num, _u8 GPIO_Val) ;
_u32 MXL_Ceiling( _u32 value, _u32 resolution ) ;
_u32 MXL_GetXtalInt(_u32 Xtal_Freq) ;
_u16 MXL_GetInitRegister(Tuner_struct *Tuner, _u8 * RegNum, _u8 *RegVal, int *count) ;
_u16 MXL_GetCHRegister(Tuner_struct *Tuner, _u8 * RegNum, _u8 *RegVal, int *count) ;
_u16 MXL_GetCHRegister_ZeroIF(Tuner_struct *Tuner, _u8 * RegNum, _u8 *RegVal, int *count) ;
_u16 MXL_GetCHRegister_LowIF(Tuner_struct *Tuner, _u8 * RegNum, _u8 *RegVal, int *count) ;
_u16 MXL_GetMasterControl(_u8 *MasterReg, int state) ;
#ifdef _MXL_PRODUCTION
_u16 MXL_VCORange_Test(Tuner_struct *Tuner, int VCO_Range) ;
_u16 MXL_Hystersis_Test(Tuner_struct *Tuner, int Hystersis) ;
#endif
// The following context is MxL5005S tuner API source code
/**
@file
@brief MxL5005S tuner module declaration
One can manipulate MxL5005S tuner through MxL5005S module.
MxL5005S module is derived from tuner module.
*/
#include "tuner_base.h"
// Definitions
// Constants
#define MXL5005S_REG_WRITING_TABLE_LEN_MAX 104
#define MXL5005S_LATCH_BYTE 0xfe
// Register address, MSB, and LSB
#define MXL5005S_BB_IQSWAP_ADDR 59
#define MXL5005S_BB_IQSWAP_MSB 0
#define MXL5005S_BB_IQSWAP_LSB 0
#define MXL5005S_BB_DLPF_BANDSEL_ADDR 53
#define MXL5005S_BB_DLPF_BANDSEL_MSB 4
#define MXL5005S_BB_DLPF_BANDSEL_LSB 3
// Standard modes
enum
{
MXL5005S_STANDARD_DVBT,
MXL5005S_STANDARD_ATSC,
};
#define MXL5005S_STANDARD_MODE_NUM 2
// Bandwidth modes
enum
{
MXL5005S_BANDWIDTH_6MHZ = 6000000,
MXL5005S_BANDWIDTH_7MHZ = 7000000,
MXL5005S_BANDWIDTH_8MHZ = 8000000,
};
#define MXL5005S_BANDWIDTH_MODE_NUM 3
// Top modes
enum
{
MXL5005S_TOP_5P5 = 55,
MXL5005S_TOP_7P2 = 72,
MXL5005S_TOP_9P2 = 92,
MXL5005S_TOP_11P0 = 110,
MXL5005S_TOP_12P9 = 129,
MXL5005S_TOP_14P7 = 147,
MXL5005S_TOP_16P8 = 168,
MXL5005S_TOP_19P4 = 194,
MXL5005S_TOP_21P2 = 212,
MXL5005S_TOP_23P2 = 232,
MXL5005S_TOP_25P2 = 252,
MXL5005S_TOP_27P1 = 271,
MXL5005S_TOP_29P2 = 292,
MXL5005S_TOP_31P7 = 317,
MXL5005S_TOP_34P9 = 349,
};
// IF output load
enum
{
MXL5005S_IF_OUTPUT_LOAD_200_OHM = 200,
MXL5005S_IF_OUTPUT_LOAD_300_OHM = 300,
};
/// MxL5005S extra module alias
typedef struct MXL5005S_EXTRA_MODULE_TAG MXL5005S_EXTRA_MODULE;
// MxL5005S register setting function pointer
typedef int
(*MXL5005S_FP_SET_REGS_WITH_TABLE)(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned char *pAddrTable,
unsigned char *pByteTable,
int TableLen
);
// MxL5005S register mask bits setting function pointer
typedef int
(*MXL5005S_FP_SET_REG_MASK_BITS)(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned char RegAddr,
unsigned char Msb,
unsigned char Lsb,
const unsigned char WritingValue
);
// MxL5005S spectrum mode setting function pointer
typedef int
(*MXL5005S_FP_SET_SPECTRUM_MODE)(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
int SpectrumMode
);
// MxL5005S bandwidth setting function pointer
typedef int
(*MXL5005S_FP_SET_BANDWIDTH_HZ)(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned long BandwidthHz
);
// MxL5005S extra module
struct MXL5005S_EXTRA_MODULE_TAG
{
// MxL5005S function pointers
MXL5005S_FP_SET_REGS_WITH_TABLE SetRegsWithTable;
MXL5005S_FP_SET_REG_MASK_BITS SetRegMaskBits;
MXL5005S_FP_SET_SPECTRUM_MODE SetSpectrumMode;
MXL5005S_FP_SET_BANDWIDTH_HZ SetBandwidthHz;
// MxL5005S extra data
unsigned char AgcMasterByte; // Variable name in MaxLinear source code: AGC_MASTER_BYTE
// MaxLinear defined struct
Tuner_struct MxlDefinedTunerStructure;
};
// Builder
void
BuildMxl5005sModule(
TUNER_MODULE **ppTuner,
TUNER_MODULE *pTunerModuleMemory,
MXL5005S_EXTRA_MODULE *pMxl5005sExtraModuleMemory,
BASE_INTERFACE_MODULE *pBaseInterfaceModuleMemory,
I2C_BRIDGE_MODULE *pI2cBridgeModuleMemory,
unsigned char DeviceAddr,
int StandardMode
);
// Manipulaing functions
void
mxl5005s_SetDeviceAddr(
TUNER_MODULE *pTuner,
unsigned char DeviceAddr
);
void
mxl5005s_GetTunerType(
TUNER_MODULE *pTuner,
int *pTunerType
);
int
mxl5005s_GetDeviceAddr(
TUNER_MODULE *pTuner,
unsigned char *pDeviceAddr
);
int
mxl5005s_Initialize(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner
);
int
mxl5005s_SetRfFreqHz(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned long RfFreqHz
);
int
mxl5005s_GetRfFreqHz(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned long *pRfFreqHz
);
// Extra manipulaing functions
int
mxl5005s_SetRegsWithTable(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned char *pAddrTable,
unsigned char *pByteTable,
int TableLen
);
int
mxl5005s_SetRegMaskBits(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned char RegAddr,
unsigned char Msb,
unsigned char Lsb,
const unsigned char WritingValue
);
int
mxl5005s_SetSpectrumMode(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
int SpectrumMode
);
int
mxl5005s_SetBandwidthHz(
struct dvb_usb_device* dib,
TUNER_MODULE *pTuner,
unsigned long BandwidthHz
);
// I2C birdge module demod argument setting
void
mxl5005s_SetI2cBridgeModuleTunerArg(
TUNER_MODULE *pTuner
);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment